Low Cycle Fatigue Counter

1980 ◽  
Vol 52 (6) ◽  
pp. 21-22
Keyword(s):  
Gas Turbine ◽  
High Speed ◽  
Low Cycle Fatigue ◽  
Engine Performance ◽  
Gas Turbine Engine ◽  
Rotating Machinery ◽  
Cycle Fatigue ◽  
Turbine Engine ◽  
On Demand ◽  
Long Life

The modern aircraft gas turbine engine produces power on demand hour upon hour and day in, day out. It is one of the most extensively used types of high‐speed rotating machinery as well as one of the most efficient converters of fuel into thrust. Reliability and long life with minimum maintenance depend on efficient monitoring of engine performance and component status.

Design and Analysis of a New Accessory Gearbox Housing for a Gas Turbine Engine

2011 ◽  
Author(s):  
Partha S. Das
Keyword(s):  
Gas Turbine ◽  
Low Cycle Fatigue ◽  
Minimum Weight ◽  
Cost Savings ◽  
Gas Turbine Engine ◽  
Cycle Fatigue ◽  
Element Analysis ◽  
Turbine Engine ◽  
Housing Design ◽  
Engine Mount

Accessory Gearbox (AGB) Housing is one of the most critical components of a gas turbine engine that lies between the core engine & the aircraft. The function of the AGB Housing is to provide support for the gear drive assembly that transfers power from the engine to the engine accessories and to the power takeoff drive for the aircraft accessories. The housing also functions as an oil tight container and passageway for lubrication. In addition, the AGB housing provides mount points to attach engine/aircraft support accessories, including the engine mount points to the aircraft. The complexity in predicting AGB housing behavior under the gear loading, engine loading and engine induced vibration is one of the main challenges of designing a new gearbox with minimum weight. To address these issues, the current paper presents for the first time the design-analysis of a new lightweight AGB housing for a turboshaft engine, based on the following three major requirements: i) gear bearing pads strength & stiffness capability, ii) AGB mount pads (for accessories and for engine) load carrying capability, and, iii) vibratory response (mainly high cycle fatigue (HCF) response) of the AGB housing. A 3-D Finite Element Analysis (FEA) model of the AGB housing was developed using the proposed initial design. Various design modifications, involving several interrelated, iterative steps, were then carried out by adjusting and modifying the housing wall thickness, placement & sizes of internal ribs and external gussets, including additional geometric modifications to satisfy the design objectives. The result is a robust, lightweight AGB housing design, eliminating the need for some of the required testing for the qualification of the new gearbox, indicating a significant cost savings. This paper also discusses in detail the methodology for the gear bearing pad strength/stiffness calculation, the FEA modeling techniques for the application of mount loads and gear bearing loads under operating & flight maneuver conditions, and, a methodology for addressing a combined HCF & LCF (Low Cycle Fatigue) response of the housing.

Calculation of low cycle fatigue life for gas-turbine engine critical parts

2017 ◽  
Vol 60 (3) ◽  
pp. 421-427
Author(s):  
A. V. Pakhomenkov ◽  
R. A. Azimov ◽  
S. A. Bukatyi
Keyword(s):  
Fatigue Life ◽  
Gas Turbine ◽  
Low Cycle Fatigue ◽  
Gas Turbine Engine ◽  
Cycle Fatigue ◽  
Turbine Engine

Low Cycle Fatigue Life Model for Gas Turbine Engine Disks

1980 ◽  
Vol 102 (1) ◽  
pp. 45-49
Author(s):  
T. G. Meyer ◽  
T. A. Cruse
Keyword(s):  
Gas Turbine ◽  
Low Cycle Fatigue ◽  
Damage Model ◽  
Strain Range ◽  
Gas Turbine Engine ◽  
Cycle Fatigue ◽  
Turbine Engine ◽  
Mission History ◽  
Life Model ◽  
Temperature Exposure

A low cycle fatigue (LCF) life exhaustion method is developed for gas turbine engine disks subjected to complex mission history loading. The method is incorporated into an algorithm for LCF life exhaustion prediction as a function of component, material, mission history, and mission ordering. Principal features in the LCF life model include a simple strain range-mean stress correlation model, a predictive model for the effects of strain-hardened surface layers due to machining and the effects of dwell (creep) due to elevated temperature exposure time, a fracture mechanics-based nonlinear, cumulative damage model, and full-scale component verification.

scholarly journals The Engine Usage Indicator

1969 ◽  
Author(s):  
R. Hohenberg
Keyword(s):  
Gas Turbine ◽  
Low Cycle Fatigue ◽  
Gas Turbine Engine ◽  
Conceptual Basis ◽  
Cycle Fatigue ◽  
Gas Temperature ◽  
Temperature Shock ◽  
Turbine Engine

An instrument to cumulate the exposure of a small gas turbine engine to certain deteriorating phenomena has been developed. The device displays usage in cumulative creep, low cycle fatigue, and temperature shock derived from measured gas temperature and speed. This instrument and its conceptual basis are described.

Sign in / Sign up

Export Citation Format

Share Document