Painting for the Protection of Outdoor Metal Structures

1954 ◽  
Vol 1 (7) ◽  
pp. 239-242
Author(s):  
J.F. Stanners
Keyword(s):  
Paint System ◽  
Metal Structures ◽  
Paint Formulation

In this second and concluding part of his article, Mr. Stanners discusses the choice of paints, paint formulation, the paint system, and, finally, when and how to paint. The first part of the article ‘Preparing to Paint’ appeared in our August issue.

STOCHASTIC CALCULATION OF LIFETIME PREDICTION FOR COMPONENTS IN METAL STRUCTURES DUE TO THE GROWTH OF MICRODEFECTS

2020 ◽  
Vol 4 (97) ◽  
pp. 69-76
Author(s):  
IGOR N. SILVERSTOV
Keyword(s):  
Fatigue Strength ◽  
Fracture Mechanics ◽  
Stochastic Approach ◽  
Fatigue Curve ◽  
Probability Of Failure ◽  
Lifetime Prediction ◽  
Statistical Distributions ◽  
Metal Structures

A stochastic approach has been developed to evaluate fatigue strength using elements of the fracture mechanics. The article presents a method for determining the initial parameters of statistical distributions. It also considers the method for constructing a fatigue curve for a component of any size and configuration with any given probability of failure.

RECLAMATION AND CULVERT CROSSINGS MADE OF CORRUGATED PIPES ON SPAWNING STREAMS

2020 ◽  
pp. 68-77
Author(s):  
O.N. CHERNYKH ◽  
◽  
A.V. RBURLACHENKO
Keyword(s):  
Single Point ◽  
Experimental Studies ◽  
Fish Passage ◽  
Future Research ◽  
Fish Stocks ◽  
Metal Structures ◽  
Natural Reproduction ◽  
Spiral Shape ◽  
Corrugated Metal ◽  
Spawning Streams

Recommendations are presented for solving issues that arise in the design and operation of tubular transport crossings of corrugated metal structures through spawning streams while ensuring the safety and natural reproduction of fish stocks. There are discussed the results of experimental studies of culverts made of metal corrugated pipes with a normal and spiral shape of corrugation the bottom of which is buried and filled with suitable granular material to the level of the natural channel of a small watercourse. It is established that when 10% of the area of the corrugated pipe is occupied by stone filling, its throughput is reduced by about 10-12%. Based on the review of the existing literature and the results of laboratory experiments, data is provided to estimate the values of the roughness coefficients of the composite cross-section of a single-point junction and directions for future research on culvert reclamation are outlined. Studying of the structure of the velocity distribution in culverts can lead to the improved conditions for fish passage without installing special structural elements in the transit path of the fish passage structure.

Corrosion of Welded Metal Structures of Mining Equipment

2018 ◽  
Vol 69 (9) ◽  
pp. 2563-2566
Author(s):  
Dan Dobrota
Keyword(s):  
Carbon Concentration ◽  
Welded Joints ◽  
Construction Material ◽  
Working Environment ◽  
Mining Equipment ◽  
Metal Structures ◽  
Corrosion Phenomenon ◽  
Welding Regime ◽  
New Material ◽  
Initial Research

Mining equipment made of welded metal structures is strongly affected by the corrosion phenomenon due to the working conditions. Initial research has shown that the corrosion phenomenon is most pronounced in the area of cross-welded joints and welded T-shaped joints. In the researches, there was made a chemical analysis of the welded construction material used respectively of the new material and it was observed a reduction in carbon concentration in the material used, but also a substantial increase in the sulfur concentration compared to the new material. The pronounced corrosion of the metallic structure is influenced by the chemical composition change because the sulfur is a grafitizing and weakening element, and the decrease in carbon concentration causes a decrease in corrosion resistance. Also, the pronounced corrosion is due to the action of sulfurous acid (H2SO3) and hydrogen sulfide (H2S), elements that are present in the working environment of welded constructions. In order to achieve a reduction in the corrosion phenomenon, it is very important that the welded joints are made using the optimal parameters of the welding regime so as to obtain metallographic structure with finer granulations.

A Predictive Model of the Impact of the Skidding System on Forest Soil in Severe Climatic Conditions

2020 ◽  
pp. 131-144
Author(s):  
S.E. Rudov ◽  
◽  
V.Ya. Shapiro ◽  
O.I. Grigoreva ◽  
I.V. Grigorev ◽  
...  
Keyword(s):  
Forest Soil ◽  
Warm Season ◽  
Climatic Conditions ◽  
Soil Freezing ◽  
Class Iii ◽  
Freezing And Thawing ◽  
Metal Structures ◽  
Rapid Adjustment ◽  
Soil Freezing And Thawing ◽  
The Impact

In the Russian Federation logging operations are traditionally carried out in winter. This is due to the predominance of areas with swamped and water-logged (class III and IV) soils in the forest fund, where work of forestry equipment is difficult, and sometimes impossible in the warm season. The work of logging companies in the forests of the cryolithozone, characterized by a sharply continental climate, with severe frosts in winter, is hampered by the fact that forest machines are not recommended to operate at temperatures below –40 °C due to the high probability of breaking of metal structures and hydraulic system. At the same time, in the warm season, most of the cutting areas on cryosolic soils become difficult to pass for heavy forest machines. It turns out that the convenient period for logging in the forests of the cryolithozone is quite small. This results in the need of work in the so-called off-season period, when the air temperature becomes positive, and the thawing processes of the soil top layer begin. The same applies to the logging companies not operating in the conditions of cryosolic soils, for instance, in the Leningrad, Novgorod, Pskov, Vologda regions, etc. The observed climate warming has led to a significant reduction in the sustained period of winter logging. Frequent temperature transitions around 0 °C in winter, autumn and spring necessitate to work during the off-season too, while cutting areas thaw. In bad seasonal and climatic conditions, which primarily include off-season periods in general and permafrost in particular, it is very difficult to take into account in mathematical models features of soil freezing and thawing and their effect on the destruction nature. The article shows that the development of long-term predictive models of indicators of cyclic interaction between the skidding system and forest soil in adverse climatic conditions of off-season logging operations in order to improve their reliability requires rapid adjustment of the calculated parameters based on the actual experimental data at a given step of the cycles.

On corrosion damage and its connection with non-metal inclusions in elements of pipe metal structures of NPP

2020 ◽  
pp. 148-156
Author(s):  
A. S. Mitrofanov ◽  
Ye. A. Krainyuk ◽  
S. V. Gozhenko ◽  
V. N. Voyevodin ◽  
R. L. Vasilenko
Keyword(s):  
Corrosion Damage ◽  
Metal Structures ◽  
Pipe Metal

Impact of plumb location on the determination accuracy of chimney heeling by photographic method

2017 ◽  
Vol 919 (1) ◽  
pp. 55-59
Author(s):  
O.V. Raskatkina
Keyword(s):  
Image Processing ◽  
Experimental Research ◽  
Optimal Location ◽  
Paint System ◽  
Photographic Method ◽  
Round Shape ◽  
Straight Line ◽  
Left And Right

There is a method of using the corded plumb as vertical reference straight line, located in front of the objective of a digital photocamera in the article. When we take picture of the object under study, there will be this straight line in the photo, from which we can carry out all necessary measurements in the Paint system with the following conversion them into metric system. All possible variants of location of the reference straight line relative to it axis are considered by the example of the construction of the tower round shape and it is shown a method of heeling calculation by image processing results. Experimental research to determine the degree of influence of plumb location in the photo relative to it axe on the accuracy of the heeling determination was carried out by shooting the brick chimney with the 30 metres height when the plumb is located on the chimney axis and on different distance from the left and right of the axis. It is set in the result that the plumb location has influence on the accuracy of heeling determination. The optimal location is on the centre of the top section of the chimney and there is shown the method of accounting corrections due to inaccurate location.

scholarly journals Mechanisms of construction machines and selection of steels for the manufacture of welded metal structures

2020 ◽  
Vol 1001 ◽  
pp. 012012
Author(s):  
Alexander Scherbakov ◽  
Anna Babanina ◽  
Elena Solovyeva ◽  
Maxim Aleksandrovskiy
Keyword(s):  
Metal Structures ◽  
Selection Of

scholarly journals Ultra-Narrow Metallic Nano-Trenches Realized by Wet Etching and Critical Point Drying

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 783
Author(s):  
Jeeyoon Jeong ◽  
Hyosim Yang ◽  
Seondo Park ◽  
Yun Daniel Park ◽  
Dai-Sik Kim
Keyword(s):  
Critical Point ◽  
Terahertz Spectroscopy ◽  
High Surface ◽  
Wet Etching ◽  
Drying Process ◽  
Metal Structures ◽  
Critical Point Drying ◽  
Metal Insulator Metal ◽  
Gap Width ◽  
Optical Structure

A metallic nano-trench is a unique optical structure capable of ultrasensitive detection of molecules, active modulation as well as potential electrochemical applications. Recently, wet-etching the dielectrics of metal–insulator–metal structures has emerged as a reliable method of creating optically active metallic nano-trenches with a gap width of 10 nm or less, opening a new venue for studying the dynamics of nanoconfined molecules. Yet, the high surface tension of water in the process of drying leaves the nano-trenches vulnerable to collapsing, limiting the achievable width to no less than 5 nm. In this work, we overcome the technical limit and realize metallic nano-trenches with widths as small as 1.5 nm. The critical point drying technique significantly alleviates the stress applied to the gap in the drying process, keeping the ultra-narrow gap from collapsing. Terahertz spectroscopy of the trenches clearly reveals the signature of successful wet etching of the dielectrics without apparent damage to the gap. We expect that our work will enable various optical and electrochemical studies at a few-molecules-thick level.

scholarly journals Thermoelectric current in a graphene Cooper pair splitter

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Z. B. Tan ◽  
A. Laitinen ◽  
N. S. Kirsanov ◽  
A. Galda ◽  
V. M. Vinokur ◽  
...  
Keyword(s):  
Cooper Pair ◽  
Theoretical Description ◽  
Seebeck Effect ◽  
Normal Metal ◽  
Electric Voltage ◽  
Power Generators ◽  
Metal Structures ◽  
Fundamental Phenomenon ◽  
Non Local ◽  
Cooper Pair Splitting

AbstractGeneration of electric voltage in a conductor by applying a temperature gradient is a fundamental phenomenon called the Seebeck effect. This effect and its inverse is widely exploited in diverse applications ranging from thermoelectric power generators to temperature sensing. Recently, a possibility of thermoelectricity arising from the interplay of the non-local Cooper pair splitting and the elastic co-tunneling in the hybrid normal metal-superconductor-normal metal structures was predicted. Here, we report the observation of the non-local Seebeck effect in a graphene-based Cooper pair splitting device comprising two quantum dots connected to an aluminum superconductor and present a theoretical description of this phenomenon. The observed non-local Seebeck effect offers an efficient tool for producing entangled electrons.

scholarly journals A FastSLAM Approach Integrating Beamforming Maps for Ultrasound-Based Robotic Inspection of Metal Structures

2021 ◽  
Vol 6 (2) ◽  
pp. 2908-2913
Author(s):  
Othmane-Latif Ouabi ◽  
Pascal Pomarede ◽  
Matthieu Geist ◽  
Nico F. Declercq ◽  
Cedric Pradalier
Keyword(s):  
Metal Structures
Sign in / Sign up

Export Citation Format

Share Document