Improved technique for minimizing torque pulsation in Halbach array permanent magnet machines

2012 ◽  
Vol 31 (6) ◽  
pp. 1590-1602 ◽  
Author(s):  
Siavash Sadeghi ◽  
Leila Parsa
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Machines ◽  
Halbach Array ◽  
Improved Technique

Analytical Prediction of Halbach Array Permanent Magnet Machines Considering Finite Tooth Permeability

2020 ◽  
Vol 56 (6) ◽  
pp. 1-10
Author(s):  
H. S. Zhang ◽  
Z. X. Deng ◽  
M. L. Yang ◽  
Y. Zhang ◽  
J. Y. Tuo ◽  
...  
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Machines ◽  
Analytical Prediction ◽  
Halbach Array

A novel analytical calculation of magnetic field in the slotted air gap of spoke-type permanent-magnet machines using conformal mapping

2020 ◽  
pp. 1-15
Author(s):  
Jianqi Li ◽  
Yu Zhou ◽  
Jianying Li
Keyword(s):  
Magnetic Field ◽  
Conformal Mapping ◽  
Permanent Magnet ◽  
Flux Density ◽  
Analytical Method ◽  
Electromotive Force ◽  
Analytical Calculation ◽  
Air Gap ◽  
Permanent Magnet Machines ◽  
Peak Value

This paper presented a novel analytical method for calculating magnetic field in the slotted air gap of spoke-type permanent-magnet machines using conformal mapping. Firstly, flux density without slots and complex relative air-gap permeance of slotted air gap are derived from conformal transformation separately. Secondly, they are combined in order to obtain normalized flux density taking account into the slots effect. The finite element (FE) results confirmed the validity of the analytical method for predicting magnetic field and back electromotive force (BEMF) in the slotted air gap of spoke-type permanent-magnet machines. In comparison with FE result, the analytical solution yields higher peak value of cogging torque.

Performance analysis of magnetic gear with Halbach array for high power and high speed

2020 ◽  
Vol 64 (1-4) ◽  
pp. 959-967
Author(s):  
Se-Yeong Kim ◽  
Tae-Woo Lee ◽  
Yon-Do Chun ◽  
Do-Kwan Hong
Keyword(s):  
Permanent Magnet ◽  
Eddy Current ◽  
High Power ◽  
High Speed ◽  
Torque Ripple ◽  
Eddy Current Loss ◽  
Element Analysis ◽  
Current Loss ◽  
Halbach Array ◽  
Magnetic Gear

In this study, we propose a non-contact 80 kW, 60,000 rpm coaxial magnetic gear (CMG) model for high speed and high power applications. Two models with the same power but different radial and axial sizes were optimized using response surface methodology. Both models employed a Halbach array to increase torque. Also, an edge fillet was applied to the radial magnetized permanent magnet to reduce torque ripple, and an axial gap was applied to the permanent magnet with a radial gap to reduce eddy current loss. The models were analyzed using 2-D and 3-D finite element analysis. The torque, torque ripple and eddy current loss were compared in both models according to the materials used, including Sm2Co17, NdFeBs (N42SH, N48SH). Also, the structural stability of the pole piece structure was investigated by forced vibration analysis. Critical speed results from rotordynamics analysis are also presented.

Sign in / Sign up

Export Citation Format

Share Document