scholarly journals Rheology of Cohesive Granular Media: Shear Banding, Hysteresis, and Nonlocal Effects

2021 ◽  
Vol 11 (2) ◽  
Author(s):  
Sandip Mandal ◽  
Maxime Nicolas ◽  
Olivier Pouliquen
Keyword(s):  
Granular Media ◽  
Shear Banding ◽  
Nonlocal Effects

scholarly journals Flows of cohesive granular media

2021 ◽  
Vol 249 ◽  
pp. 01001
Author(s):  
Sandip Mandal ◽  
Adrien Gans ◽  
Maxime Nicolas ◽  
Olivier Pouliquen
Keyword(s):  
Granular Media ◽  
Flow Behavior ◽  
Constitutive Relations ◽  
Shear Banding ◽  
Plane Shear ◽  
Simple Method ◽  
Plastic Properties ◽  
Shear Cell ◽  
Numerical Studies ◽  
Long Time

Cohesive granular media have broad applications in industries. However, our understanding of their flow behavior is still limited compared to dry granular media, although rich knowledge about their static and plastic properties has been gained. In this paper, we provide some insights into the flow behavior of cohesive granular media from our recent numerical studies using an inclined plane and a plane shear cell. We evidence that the cohesive nature of flows is significantly affected by material properties of the particles like stiffness and inelasticity in addition to the inter-particle adhesion and introduce the concept of “effective” adhesion, which incorporates the effects of these three variables. We propose constitutive relations involving dimensionless inertial number and “effective” cohesion number, based on the “effective” adhesion to describe the rheology. We also show that increasing adhesion increases the hysteresis in granular media, evidencing the existence of a prominent shear weakening branch in the friction coefficient versus inertial number rheological curve. Moreover, we reveal that this increasing hysteresis gives rise to the increasing occurrence of shear banding instability, pointing to the increasing possibility of jamming in cohesive granular media. Finally, we present a promising experimental approach to investigate the flow behavior of cohesive granular materials, based on a simple method of preparing a long time stable medium with a controlled adhesion between particles.

scholarly journals On the nucleation and growth of kink and shear bands

2013 ◽  
Vol 371 (1993) ◽  
pp. 20120431 ◽  
Author(s):  
G. W. Hunt ◽  
T. J. Dodwell ◽  
J. Hammond
Keyword(s):  
Shear Band ◽  
Granular Media ◽  
Numerical Solutions ◽  
Shear Banding ◽  
Shear Bands ◽  
Nucleation And Growth ◽  
Critical Force ◽  
Periodic State ◽  
Similarities And Differences ◽  
Force Dipole

Similarities and differences between the phenomena of kink banding in compressed layered structures and shear banding in compressed granular media are explored. Simple models are introduced for both, and the focus is directed onto how they can nucleate from the perfectly flat state. A convincing scenario is found for each in which a mode develops from an initial bifurcation into a periodic state, followed by rapid localization under falling load, while retaining decaying but wavy tails. At a certain lower critical load, the tails lose their waviness, and the expected form of the kink or shear band appears. In each case, good numerical evidence is provided for the existence of this form of behaviour. A second potential instability for the layered case is also explored, linked to the appearance of a critical force dipole that overcomes bending stiffness locally at some point along the length. This mode, which should appear with non-wavy decaying tails at the lower of the two critical loads mentioned earlier, proves somewhat elusive. Evidence is found for its existence in the linearized approximation to the layered model, but the search for numerical solutions to the underlying nonlinear equation is hindered by a shortage of suitable boundary conditions.

scholarly journals Nonlocal effects in the shear banding of a thixotropic yield stress fluid

2021 ◽  
Vol 6 (11) ◽  
Author(s):  
M. Raquel Serial ◽  
Daniel Bonn ◽  
Thom Huppertz ◽  
Joshua A. Dijksman ◽  
Jasper van der Gucht ◽  
...  
Keyword(s):  
Yield Stress ◽  
Shear Banding ◽  
Nonlocal Effects ◽  
Yield Stress Fluid

Role of contact couples and couple stress in the behaviour of granular media

1998 ◽  
Vol 08 (PR8) ◽  
pp. Pr8-87-Pr8-94
Author(s):  
F. Dedecker ◽  
Ph. Dubujet ◽  
B. Cambou
Keyword(s):  
Couple Stress ◽  
Granular Media

Avalanche Stratification - Experimental Tests of the “Metastable Wedge” and “Continuous Flow” Models

2000 ◽  
Vol 627 ◽  
Author(s):  
M. E. Swanson ◽  
M. Landreman ◽  
J. Michel ◽  
J. Kakalios
Keyword(s):  
Continuous Flow ◽  
Granular Media ◽  
Experimental Tests ◽  
Coarse Sand ◽  
Angle Of Repose ◽  
Flow Models ◽  
Maximum Angle ◽  
Stratification Effect ◽  
Upward Moving ◽  
Moving Layer

ABSTRACTWhen an initially homogeneous binary mixture of granular media such as fine and coarse sand is poured near the closed edge of a “quasi-two-dimensional” Hele-Shaw cell consisting of two vertical transparent plates held a narrow distance apart, the mixture spontaneously forms alternating segregated layers. Experimental measurements of this stratification effect are reported in order to determine which model, one which suggests that segregation only occurs when the granular material contained within a metastable heap between the critical and maximum angle of repose avalanches down the free surface, or one for which the segregation results from smaller particles becoming trapped in the top surface and being removed from the moving layer during continuous flow. The result reported here indicate that the Metastable Wedge model provides a natural explanation for the initial mixed zone which precedes the formation of the layers, while the Continuous Flow model explains the observed upward moving kink of segregated material for higher granular flux rates, and that both mechansims are necessary in order to understand the observed pairing of segregated layersfor intermediate flow rates and cell separations.

Stress fields in granular material and implications for performance of robot locomotion over granular media

2015 ◽  
Vol 8 (1) ◽  
pp. 2005-2009
Author(s):  
Diandong Ren ◽  
Lance M. Leslie ◽  
Congbin Fu
Keyword(s):  
Mechanical Properties ◽  
Granular Material ◽  
Granular Media ◽  
Rotation Frequency ◽  
Legged Locomotion ◽  
Working Environment ◽  
Navier Stokes ◽  
Maximum Speed ◽  
Sigmoid Curve ◽  
Multi Body

 Legged locomotion of robots has advantages in reducing payload in contexts such as travel over deserts or in planet surfaces. A recent study (Li et al. 2013) partially addresses this issue by examining legged locomotion over granular media (GM). However, they miss one extremely significant fact. When the robot’s wheels (legs) run over GM, the granules are set into motion. Hence, unlike the study of Li et al. (2013), the viscosity of the GM must be included to simulate the kinematic energy loss in striking and passing through the GM. Here the locomotion in their experiments is re-examined using an advanced Navier-Stokes framework with a parameterized granular viscosity. It is found that the performance efficiency of a robot, measured by the maximum speed attainable, follows a six-parameter sigmoid curve when plotted against rotating frequency. A correct scaling for the turning point of the sigmoid curve involves the footprint size, rotation frequency and weight of the robot. Our proposed granular response to a load, or the ‘influencing domain’ concept points out that there is no hydrostatic balance within granular material. The balance is a synergic action of multi-body solids. A solid (of whatever density) may stay in equilibrium at an arbitrary depth inside the GM. It is shown that there exists only a minimum set-in depth and there is no maximum or optimal depth. The set-in depth of a moving robot is a combination of its weight, footprint, thrusting/stroking frequency, surface property of the legs against GM with which it has direct contact, and internal mechanical properties of the GM. If the vehicle’s working environment is known, the wheel-granular interaction and the granular mechanical properties can be grouped together. The unitless combination of the other three can form invariants to scale the performance of various designs of wheels/legs. Wider wheel/leg widths increase the maximum achievable speed if all other parameters are unchanged.

β-Cyclodextrin Polymers on Microcrystalline Cellulose as a Granular Media for Organic Micropollutant Removal from Water

2018 ◽  
Author(s):  
Diego Alzate-Sanchez ◽  
Yuhan Ling ◽  
Chenjun Li ◽  
Benjamin Frank ◽  
Reiner Bleher ◽  
...  
Keyword(s):  
Microcrystalline Cellulose ◽  
Continuous Flow ◽  
Granular Media ◽  
Anaerobic Biodegradation ◽  
Thin Coating ◽  
Micropollutant Removal ◽  
Cyclodextrin Polymers ◽  
Flow Experiments ◽  
Aerobic And Anaerobic ◽  
Cellulose Composite

This manuscript describes cyclodextrin polymers formed as a thin coating on microcrystalline cellulose. The resulting polymer/cellulose composite shows promising performance for removing organic pollutants from water and can be packed into columns for continuous-flow experiments. The polymer/cellulose composite also shows excellent resistance to aerobic and anaerobic biodegradation.

Analysis of process of emulsions transport in hydrophilic/oleophilic granular porous media driven by capillary force

2018 ◽  
Vol 2 (21) ◽  
pp. 85-101
Author(s):  
Olga Shtyka ◽  
Łukasz Przybysz ◽  
Mariola Błaszczyk ◽  
Jerzy P. Sęk
Keyword(s):  
Porous Media ◽  
Experimental Research ◽  
Granular Media ◽  
Single Phase ◽  
Influential Factor ◽  
Dispersed Phase ◽  
Porous Structures ◽  
Phase Concentration ◽  
Granular Porous Media ◽  
Kinetics Of

The research focuses on the issues concerning a process of multiphase liquids transport in granular porous media driven by the capillary pressure. The current publication is meant to introduce the results of experimental research conducted to evaluate the kinetics of the imbibition and emulsions behavior inside the porous structures. Moreover, the influence of the dispersed phase concentration and granular media structure on the mentioned process was considered. The medium imbibition with emulsifier-stabilized emulsions composed of oil as the dispersed phase in concentrations of 10 vol%, 30 vol%, and 50 vol%, was investigated. The porous media consisted of oleophilic/hydrophilic beads with a fraction of 200–300 and 600–800 μm. The experimental results provided that the emulsions imbibition in such media depended stronger on its structure compare to single-phase liquids. The increase of the dispersed phase concentration caused an insignificant mass decreasing of the imbibed emulsions and height of its penetration in a sorptive medium. The concentrations of the imbibed dispersions exceeded their initial values, but reduced with permeants front raise in the granular structures that can be defined as the influential factor for wicking process kinetics.

Sign in / Sign up

Export Citation Format

Share Document