Structure of coherent columnar vortices in three-dimensional rotating turbulent flow

2020 ◽  
Vol 5 (3) ◽  
Author(s):  
I. V. Kolokolov ◽  
L. L. Ogorodnikov ◽  
S. S. Vergeles
Keyword(s):  
Turbulent Flow ◽  
Three Dimensional ◽  
Rotating Turbulent Flow

scholarly journals Interactions between Tandem Cylinders in an Open Channel: Impact on Mean and Turbulent Flow Characteristics

Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1718
Author(s):  
Hasan Zobeyer ◽  
Abul B. M. Baki ◽  
Saika Nowshin Nowrin
Keyword(s):  
Turbulent Flow ◽  
Open Channel ◽  
Recirculation Zone ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Flow Recirculation ◽  
Tandem Cylinders ◽  
Flow Development ◽  
The Mean ◽  
Recirculation Length

The flow hydrodynamics around a single cylinder differ significantly from the flow fields around two cylinders in a tandem or side-by-side arrangement. In this study, the experimental results on the mean and turbulence characteristics of flow generated by a pair of cylinders placed in tandem in an open-channel flume are presented. An acoustic Doppler velocimeter (ADV) was used to measure the instantaneous three-dimensional velocity components. This study investigated the effect of cylinder spacing at 3D, 6D, and 9D (center to center) distances on the mean and turbulent flow profiles and the distribution of near-bed shear stress behind the tandem cylinders in the plane of symmetry, where D is the cylinder diameter. The results revealed that the downstream cylinder influenced the flow development between cylinders (i.e., midstream) with 3D, 6D, and 9D spacing. However, the downstream cylinder controlled the flow recirculation length midstream for the 3D distance and showed zero interruption in the 6D and 9D distances. The peak of the turbulent metrics generally occurred near the end of the recirculation zone in all scenarios.

Turbulent flow between counter-rotating concentric cylinders: a direct numerical simulation study

2008 ◽  
Vol 615 ◽  
pp. 371-399 ◽  
Author(s):  
S. DONG
Keyword(s):  
Turbulent Flow ◽  
Large Scale ◽  
Outer Cylinder ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Taylor Vortex ◽  
Small Scale ◽  
Mean Flow ◽  
Concentric Cylinders ◽  
High Reynolds

We report three-dimensional direct numerical simulations of the turbulent flow between counter-rotating concentric cylinders with a radius ratio 0.5. The inner- and outer-cylinder Reynolds numbers have the same magnitude, which ranges from 500 to 4000 in the simulations. We show that with the increase of Reynolds number, the prevailing structures in the flow are azimuthal vortices with scales much smaller than the cylinder gap. At high Reynolds numbers, while the instantaneous small-scale vortices permeate the entire domain, the large-scale Taylor vortex motions manifested by the time-averaged field do not penetrate a layer of fluid near the outer cylinder. Comparisons between the standard Taylor–Couette system (rotating inner cylinder, fixed outer cylinder) and the counter-rotating system demonstrate the profound effects of the Coriolis force on the mean flow and other statistical quantities. The dynamical and statistical features of the flow have been investigated in detail.

scholarly journals Accumulation of motile elongated micro-organisms in turbulence

2013 ◽  
Vol 739 ◽  
pp. 22-36 ◽  
Author(s):  
Caijuan Zhan ◽  
Gaetano Sardina ◽  
Enkeleida Lushi ◽  
Luca Brandt
Keyword(s):  
Turbulent Flow ◽  
Three Dimensional ◽  
Laminar Flows ◽  
Marine Life ◽  
Prolate Spheroids ◽  
Linear Shear ◽  
Local Shear ◽  
Micro Organisms ◽  
Hydrodynamic Effects ◽  
Preferential Alignment

AbstractWe study the effect of turbulence on marine life by performing numerical simulations of motile micro-organisms, modelled as prolate spheroids, in isotropic homogeneous turbulence. We show that the clustering and patchiness observed in laminar flows, linear shear and vortex flows, are significantly reduced in a three-dimensional turbulent flow mainly because of the complex topology; elongated micro-organisms show some level of clustering in the case of swimmers without any preferential alignment whereas spherical swimmers remain uniformly distributed. Micro-organisms with one preferential swimming direction (e.g. gyrotaxis) still show significant clustering if spherical in shape, whereas prolate swimmers remain more uniformly distributed. Due to their large sensitivity to the local shear, these elongated swimmers react more slowly to the action of vorticity and gravity and therefore do not have time to accumulate in a turbulent flow. These results show how purely hydrodynamic effects can alter the ecology of micro-organisms that can vary their shape and their preferential orientation.

Numerical simulations and analysis of the turbulent flow field in a practical gas turbine engine combustor

2021 ◽  
pp. 095765092110632
Author(s):  
Veeraraghava R Hasti ◽  
Prithwish Kundu ◽  
Sibendu Som ◽  
Jay P Gore
Keyword(s):  
Flow Field ◽  
Turbulent Flow ◽  
Numerical Simulations ◽  
Gas Turbine ◽  
Adaptive Mesh Refinement ◽  
Three Dimensional ◽  
Adaptive Mesh ◽  
Turbulent Structures ◽  
Cut Cell ◽  
Turbulent Flow Field

The turbulent flow field in a practical gas turbine combustor is very complex because of the interactions between various flows resulting from components like multiple types of swirlers, dilution holes, and liner effusion cooling holes. Numerical simulations of flows in such complex combustor configurations are challenging. The challenges result from (a) the complexities of the interfaces between multiple three-dimensional shear layers, (b) the need for proper treatment of a large number of tiny effusion holes with multiple angles, and (c) the requirements for fast turnaround times in support of engineering design optimization. Both the Reynolds averaged Navier–Stokes simulation (RANS) and the large eddy simulation (LES) for the practical combustor geometry are considered. An autonomous meshing using the cut-cell Cartesian method and adaptive mesh refinement (AMR) is demonstrated for the first time to simulate the flow in a practical combustor geometry. The numerical studies include a set of computations of flows under a prescribed pressure drop across the passage of interest and another set of computations with all passages open with a specified total flow rate at the plenum inlet and the pressure at the exit. For both sets, the results of the RANS and the LES flow computations agree with each other and with the corresponding measurements. The results from the high-resolution LES simulations are utilized to gain fundamental insights into the complex turbulent flow field by examining the profiles of the velocity, the vorticity, and the turbulent kinetic energy. The dynamics of the turbulent structures are well captured in the results of the LES simulations.

Sign in / Sign up

Export Citation Format

Share Document