Electrical band-gap energy of porous silicon and the band offsets at the porous-silicon/crystalline-silicon heterojunction measured versus sample temperature

1998 ◽  
Vol 58 (12) ◽  
pp. 8020-8024 ◽  
Author(s):  
J. T. Frederiksen ◽  
P. G. Melcher ◽  
E. Veje
Keyword(s):  
Porous Silicon ◽  
Band Gap ◽  
Crystalline Silicon ◽  
Band Gap Energy ◽  
Sample Temperature ◽  
Band Offsets ◽  
Gap Energy ◽  
Versus Sample

Temperature dependence of AlInAs band gap energy and AlInAs/InP band offsets

1998 ◽  
Vol 14 (12) ◽  
pp. 1291-1294 ◽  
Author(s):  
P. Abraham ◽  
M. A. Garcia Perez ◽  
T. Benyattou ◽  
G. Guillot ◽  
M. Sacilotti ◽  
...  
Keyword(s):  
Temperature Dependence ◽  
Band Gap ◽  
Band Gap Energy ◽  
Band Offsets ◽  
Gap Energy

Modification of optical properties of PC-PBT/Cr2O3 and PC-PBT/CdS nanocomposites by gamma irradiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20402
Author(s):  
Kaoutar Benthami ◽  
Mai ME. Barakat ◽  
Samir A. Nouh
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Band Gap ◽  
Color Difference ◽  
Band Gap Energy ◽  
Polybutylene Terephthalate ◽  
Γ Irradiation ◽  
Gap Energy ◽  
Vis Spectroscopy ◽  
Oxygen Atoms

Nanocomposite (NCP) films of polycarbonate-polybutylene terephthalate (PC-PBT) blend as a host material to Cr2O3 and CdS nanoparticles (NPs) were fabricated by both thermolysis and casting techniques. Samples from the PC-PBT/Cr2O3 and PC-PBT/CdS NCPs were irradiated using different doses (20–110 kGy) of γ radiation. The induced modifications in the optical properties of the γ irradiated NCPs have been studied as a function of γ dose using UV Vis spectroscopy and CIE color difference method. Optical dielectric loss and Tauc's model were used to estimate the optical band gaps of the NCP films and to identify the types of electronic transition. The value of optical band gap energy of PC-PBT/Cr2O3 NCP was reduced from 3.23 to 3.06 upon γ irradiation up to 110 kGy, while it decreased from 4.26 to 4.14 eV for PC-PBT/CdS NCP, indicating the growth of disordered phase in both NCPs. This was accompanied by a rise in the refractive index for both the PC-PBT/Cr2O3 and PC-PBT/CdS NCP films, leading to an enhancement in their isotropic nature. The Cr2O3 NPs were found to be more effective in changing the band gap energy and refractive index due to the presence of excess oxygen atoms that help with the oxygen atoms of the carbonyl group in increasing the chance of covalent bonds formation between the NPs and the PC-PBT blend. Moreover, the color intensity, ΔE has been computed; results show that both the two synthesized NCPs have a response to color alteration by γ irradiation, but the PC-PBT/Cr2O3 has a more response since the values of ΔE achieved a significant color difference >5 which is an acceptable match in commercial reproduction on printing presses. According to the resulting enhancement in the optical characteristics of the developed NCPs, they can be a suitable candidate as activate materials in optoelectronic devices, or shielding sheets for solar cells.

Stability Investigation in the Optical Properties of Thermally Evaporated Ge5Se95-x Znx Thin Films

2015 ◽  
Vol 7 (3) ◽  
pp. 1923-1930
Author(s):  
Austine Amukayia Mulama ◽  
Julius Mwakondo Mwabora ◽  
Andrew Odhiambo Oduor ◽  
Cosmas Mulwa Muiva ◽  
Boniface Muthoka ◽  
...  
Keyword(s):  
Thin Films ◽  
Band Gap ◽  
Optical Band Gap ◽  
Thermal Evaporation ◽  
Optical Transition ◽  
Bulk Material ◽  
Band Gap Energy ◽  
Optical Absorbance ◽  
Gap Energy ◽  
Constituent Elements

 Selenium-based chalcogenides are useful in telecommunication devices like infrared optics and threshold switching devices. The investigated system of Ge5Se95-xZnx (0.0 ≤ x ≤ 4 at.%) has been prepared from high purity constituent elements. Thin films from the bulk material were deposited by vacuum thermal evaporation. Optical absorbance measurements have been performed on the as-deposited thin films using transmission spectra. The allowed optical transition was found to be indirect and the corresponding band gap energy determined. The variation of optical band gap energy with the average coordination number has also been investigated based on the chemical bonding between the constituents and the rigidity behaviour of the system’s network.

scholarly journals Polymer Thermal Treatment Production of Cerium Doped Willemite Nanoparticles: An Analysis of Structure, Energy Band Gap and Luminescence Properties

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1118
Author(s):  
Ibrahim Mustapha Alibe ◽  
Khamirul Amin Matori ◽  
Mohd Hafiz Mohd Zaid ◽  
Salisu Nasir ◽  
Ali Mustapha Alibe ◽  
...  
Keyword(s):  
Solid State ◽  
Thermal Treatment ◽  
Band Gap ◽  
Optical Band Gap ◽  
Dopant Concentration ◽  
Blue Emission ◽  
Green Emission ◽  
Band Gap Energy ◽  
Solid State Lighting ◽  
Gap Energy

The contemporary market needs for enhanced solid–state lighting devices has led to an increased demand for the production of willemite based phosphors using low-cost techniques. In this study, Ce3+ doped willemite nanoparticles were fabricated using polymer thermal treatment method. The special effects of the calcination temperatures and the dopant concentration on the structural and optical properties of the material were thoroughly studied. The XRD analysis of the samples treated at 900 °C revealed the development and or materialization of the willemite phase. The increase in the dopant concentration causes an expansion of the lattice owing to the replacement of larger Ce3+ ions for smaller Zn2+ ions. Based on the FESEM and TEM micrographs, the nanoparticles size increases with the increase in the cerium ions. The mean particles sizes were estimated to be 23.61 nm at 1 mol% to 34.02 nm at 5 mol% of the cerium dopant. The optical band gap energy of the doped samples formed at 900 °C decreased precisely by 0.21 eV (i.e., 5.21 to 5.00 eV). The PL analysis of the doped samples exhibits a strong emission at 400 nm which is ascribed to the transition of an electron from localized Ce2f state to the valence band of O2p. The energy level of the Ce3+ ions affects the willemite crystal lattice, thus causing a decrease in the intensity of the green emission at 530 nm and the blue emission at 485 nm. The wide optical band gap energy of the willemite produced is expected to pave the way for exciting innovations in solid–state lighting applications.

Phase transformation and heterojunction construction of bismuth oxyiodides by grinding-assistant calcination in the presence of thiourea and its photoactivity

2021 ◽  
Author(s):  
Zichen Shen ◽  
Huanzhen Liu ◽  
Xuemei Jia ◽  
Qiaofeng Han ◽  
Huiping Bi
Keyword(s):  
Phase Transformation ◽  
Band Gap ◽  
Layered Structure ◽  
Band Gap Energy ◽  
Gap Energy

Bismuth-rich oxyhalides are promising photocatalysts due to their special layered structure and adjustable band gap energy. In this work, a series of bismuth oxyiodides were fabricated by grinding-assistant calcining in...

Quantum confinement effects and strain-induced band-gap energy shifts in core-shell Si-SiO2nanowires

2011 ◽  
Vol 83 (24) ◽  
Author(s):  
O. Demichel ◽  
V. Calvo ◽  
P. Noé ◽  
B. Salem ◽  
P.-F. Fazzini ◽  
...  
Keyword(s):  
Band Gap ◽  
Quantum Confinement ◽  
Band Gap Energy ◽  
Core Shell ◽  
Confinement Effects ◽  
Gap Energy ◽  
Quantum Confinement Effects

Band-Gap Energy Dependence of Emission Spectra in Rare Earth-Doped Zn(1-x)CdxS Thin Film Electroluminescent Devices

1992 ◽  
Vol 31 (Part 1, No. 2A) ◽  
pp. 295-300 ◽  
Author(s):  
Noboru Miura ◽  
Takashi Sasaki ◽  
Hironaga Matsumoto ◽  
Ryotaro Nakano
Keyword(s):  
Thin Film ◽  
Rare Earth ◽  
Band Gap ◽  
Energy Dependence ◽  
Emission Spectra ◽  
Band Gap Energy ◽  
Electroluminescent Devices ◽  
Gap Energy ◽  
Rare Earth Doped
Sign in / Sign up

Export Citation Format

Share Document