Model calculations for the current-voltage characteristics of moving two-dimensional pancake vortex lattices in a finite stack of magnetically coupled superconducting thin films with transport current in the top layer

1997 ◽  
Vol 56 (13) ◽  
pp. 8289-8297 ◽  
Author(s):  
Thomas Pe ◽  
Maamar Benkraouda ◽  
John R. Clem
2003 ◽  
Vol 17 (04n06) ◽  
pp. 905-909
Author(s):  
A. NIGRO ◽  
P. ROMANO ◽  
B. SAVO

Phenomena resembling a tunneling behavior have been observed on dc sputtered Nd1+xBa2-xu3Oy c-axis oriented films. The current voltage characteristics at 4.2K give evidence of quasiparticle tunneling current as usually measured in superconductor-insulator-normal metal or superconductor-insulator-superconductor junctions, with normal resistance values of about 10Ω. In the conductance curves, peak at about +/-16mV are clearly visible. An analysis of these features is presented up to temperatures close to the sample critical temperature.


1994 ◽  
Vol 361 ◽  
Author(s):  
Chang Jung Kim ◽  
Dae Sung Yoon ◽  
Joon Sung Lee ◽  
Chaun Gi Choi ◽  
Won Jong Lee ◽  
...  

ABSTRACTThe (100), (111) and randomly oriented PZT thin films were fabricated on Pt/Ti/Coming 7059 glass using sol-gel method. The thin films having different orientation were fabricated by different drying conditions for pyrolysis. The preferred orientations of the PZT thin films were observed using XRD, rocking curves, and pole figures. The microstructures were investigated using SEM. The hysteresis loops and capacitance-voltage characteristics of the films were investigated using a standardized ferroelectric test system. The dielectric constant and current-voltage characteristics of the films were investigated using an impedance analyzer and pA meter, respectively. The films oriented in a particular direction showed superior electrical characteristics to the randomly oriented films.


2011 ◽  
Vol 13 ◽  
pp. 87-92 ◽  
Author(s):  
M.S.P Sarah ◽  
F.S. Zahid ◽  
M.Z. Musa ◽  
U.M. Noor ◽  
Z. Shaameri ◽  
...  

The photoconductivity of a nanocomposite MEH-PPV:TiO2 thin film is investigated. The nanocomposite MEH-PPV:TiO2 thin film was deposited on a glass substrate by spin coating technique. The composition of the TiO2 powder was varied from 5 wt% to 20 wt% (with 5 wt% interval). The concentration of the MEH-PPV is given by 1 mg/1 ml. The current voltage characteristics were measured in dark and under illumination. The photoconductivity showed increment in value as the composition of the TiO2 is raised in the polymer based solution. The absorption showed augmentation as the amount of TiO2 is increased. The escalation of the current voltage is then supported by the results of surface morphology.


1991 ◽  
Vol 34 (6) ◽  
pp. 553-558
Author(s):  
F. Caldararu ◽  
M. Caldararu ◽  
S. Nan ◽  
D. Nicolaescu ◽  
S. Vasile

2013 ◽  
Vol 537 ◽  
pp. 114-117
Author(s):  
X.A. Mei ◽  
Rui Fang Liu ◽  
C.Q. Huang ◽  
J. Liu

La-doped bismuth titanate (Bi4-xLaxTi3O12: BLT) and pure Bi4Ti3O12 (BIT) thin films with random orientation were fabricated on Pt/Ti/SiO2/Si substrates by rf magnetron sputtering technique. These samples had polycrystalline Bi-layered perovskite structure without preferred orientation, and consisted of well developed rod-like grains with random orientation. For the samples with x=0.25 and 1.0 the current-voltage characteristics exhibited negative differential resistance behaviors and their P-V hysteresis loops were characterized by large leakage current, whereas for the samples with x=0.5 and 0.75 the current-voltage characteristics showed simple ohmic behaviors and their P-V hysteresis loops were the saturated and undistorted hysteresis loops. The remanent polarization ( Pr ) and coercive field (Ec) of the BLT ceramic with x=0.75 were above 20μC/cm2 and 85KV/cm , respectively.


Sign in / Sign up

Export Citation Format

Share Document