Dry friction in the Frenkel-Kontorova-Tomlinson model: Static properties

1996 ◽  
Vol 53 (11) ◽  
pp. 7539-7549 ◽  
Author(s):  
Michael Weiss ◽  
Franz-Josef Elmer
Keyword(s):  
Dry Friction ◽  
Static Properties ◽  
Tomlinson Model

Output trajectory tracking for mechanical systems with dry friction: A DPC approach

1997 ◽  
Author(s):  
D. von Wissel ◽  
R. Nikoukhah ◽  
F. Delebecque ◽  
P.-A. Bliman ◽  
M. Soline
Keyword(s):  
Trajectory Tracking ◽  
Dry Friction ◽  
Mechanical Systems ◽  
Output Trajectory

Improving the wear resistance of hoe blades by modifying of restoration coatings

2019 ◽  
Vol 24 (94/4) ◽  
pp. 27-32
Author(s):  
T.S. Skoblo ◽  
I.N. Rybalko ◽  
A.V. Tihonov ◽  
T.V. Maltsev
Keyword(s):  
Wear Resistance ◽  
Transition Layer ◽  
Surface Coating ◽  
Dry Friction ◽  
Raw Materials ◽  
Bentonite Clay ◽  
Magnetic Fraction ◽  
Cutting Surface ◽  
Agricultural Machines ◽  
Modifying Additive

The possibility of using a non-magnetic fraction of a detonation charge with a diamond fraction from the disposal of ammunition to modify the restoration coatings of a natural product – clay and secondary raw materials — was studied. Four different coating variants were investigated. For this, a T-620 electrode was used with its additional modification by coating with bentonite clay, as well as with a non-magnetic fraction of the detonation charge and applying it in the form of a slip coating on the cutting surface of the cultivator. It is shown that the use of such additives allows to increase the resistance of the working tool of agricultural machines, reduces its tendency to damage due to the minimum penetration of the thin-walled product of the hoe blade and a decrease in the cross section of the transition layer and the level of stress. Each modifier makes changes to increase the microhardness to varying degrees. An increase in microhardness is observed on the surface of the coating and its gradual decrease to the transition layer. The surface coating with the additional introduction of bentonite clay in a liquid bath has the highest microhardness. Its microhardness varies from HV-50-1009.7 to HV-50-615.2. Similarly, the effect of the modifying additive of the detonation charge, the microhardness varies from HV-50-969.6 to HV-50-633.26. When clay or a mixture is introduced into the restoration coating, the wear resistance increases by 1.3 - 2 times with respect to the deposited surfacing only by the electrode and by 2 - 3 times to the initial material of the cultivator. It was found that the lowest coefficient is characteristic for dry friction, as well as for hydroabrasive, for samples with additional modification with clay or a detonation charge

Study of Characteristics of Dry Friction Damping.

1985 ◽  
Author(s):  
A. V. Srinivasan ◽  
B. N. Cassenti ◽  
D. G. Cutts
Keyword(s):  
Dry Friction ◽  
Friction Damping ◽  
Dry Friction Damping
Sign in / Sign up

Export Citation Format

Share Document