Critical-current diffraction patterns of grain-boundary Josephson weak links

1990 ◽  
Vol 42 (13) ◽  
pp. 8014-8018 ◽  
Author(s):  
R. L. Peterson ◽  
J. W. Ekin
Keyword(s):  
Grain Boundary ◽  
Critical Current ◽  
Weak Links ◽  
Diffraction Patterns

Two Investigations into Grain Boundary Structure

1977 ◽  
Vol 35 ◽  
pp. 688-691
Author(s):  
P. Humble
Keyword(s):  
Grain Boundary ◽  
Dark Field ◽  
Boundary Structure ◽  
Boundary Dislocation ◽  
Bright Field ◽  
Intrinsic Structure ◽  
Weak Beam ◽  
Grain Boundary Structure ◽  
Independent Information ◽  
Diffraction Patterns

There has been sustained interest over the last few years into both the intrinsic (primary and secondary) structure of grain boundaries and the extrinsic structure e.g. the interaction of matrix dislocations with the boundary. Most of the investigations carried out by electron microscopy have involved only the use of information contained in the transmitted image (bright field, dark field, weak beam etc.). Whilst these imaging modes are appropriate to the cases of relatively coarse intrinsic or extrinsic grain boundary dislocation structures, it is apparent that in principle (and indeed in practice, e.g. (1)-(3)) the diffraction patterns from the boundary can give extra independent information about the fine scale periodic intrinsic structure of the boundary.In this paper I shall describe one investigation into each type of structure using the appropriate method of obtaining the necessary information which has been carried out recently at Tribophysics.

High resolution STEM imaging study on high Tc superconductor YBa2CuaO7-x

1988 ◽  
Vol 46 ◽  
pp. 882-883
Author(s):  
H.-J. Ou ◽  
J. M. Cowley
Keyword(s):  
Crystal Structure ◽  
High Resolution ◽  
Grain Boundary ◽  
Strong Field ◽  
Imaging Study ◽  
Structure Defects ◽  
High Tc ◽  
High Tc Superconductor ◽  
Diffraction Patterns ◽  
Lattice Planes

Using the dedicate VG-HB5 STEM microscope, the crystal structure of high Tc superconductor of YBa2Cu3O7-x has been studied via high resolution STEM (HRSTEM) imaging and nanobeam (∽3A) diffraction patterns. Figure 1(a) and 2(a) illustrate the HRSTEM image taken at 10' times magnification along [001] direction and [100] direction, respectively. In figure 1(a), a grain boundary with strong field contrast is seen between two crystal regions A and B. The grain boundary appears to be parallel to a (110) plane, although it is not possible to determine [100] and [001] axes as it is in other regions which contain twin planes [3]. Following the horizontal lattice lines, from left to right across the grain boundary, a lattice bending of ∽4° is noticed. Three extra lattice planes, indicated by arrows, were found to terminate at the grain boundary and form dislocations. It is believed that due to different chemical composition, such structure defects occur during crystal growth. No bending is observed along the vertical lattice lines.

Facet Topography and Dislocation Structure as a Possible Source for Electrical Heterogeneity in [001] TILT Bicrystals of YBa2Cu3O7-δ

1996 ◽  
Vol 54 ◽  
pp. 338-339
Author(s):  
I-Fei Tsu ◽  
D.L. Kaiser ◽  
S.E. Babcock
Keyword(s):  
Grain Boundary ◽  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Electromagnetic Properties ◽  
Length Scale ◽  
Density Values ◽  
Current Densities ◽  
Applied Fields ◽  
A Current

A current theme in the study of the critical current density behavior of YBa2Cu3O7-δ (YBCO) grain boundaries is that their electromagnetic properties are heterogeneous on various length scales ranging from 10s of microns to ˜ 1 Å. Recently, combined electromagnetic and TEM studies on four flux-grown bicrystals have demonstrated a direct correlation between the length scale of the boundaries’ saw-tooth facet configurations and the apparent length scale of the electrical heterogeneity. In that work, enhanced critical current densities are observed at applied fields where the facet period is commensurate with the spacing of the Abrikosov flux vortices which must be pinned if higher critical current density values are recorded. To understand the microstructural origin of the flux pinning, the grain boundary topography and grain boundary dislocation (GBD) network structure of [001] tilt YBCO bicrystals were studied by TEM and HRTEM.

Morphology of Σ3{/70.53°} grain boundaries in a C15 intermetallic compound

1994 ◽  
Vol 52 ◽  
pp. 684-685
Author(s):  
Fuming Chu ◽  
D. P. Pope ◽  
D. S. Zhou ◽  
T. E. Mitchell
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Crystallographic Analysis ◽  
Laves Phase ◽  
Second Phase ◽  
Bright Field Image ◽  
Boundary Edge ◽  
Arc Melting ◽  
Fcc Lattice ◽  
Diffraction Patterns

A C15 Laves phase, HfV2+Nb, shows promising mechanical properties and here we describe the structure of its grain boundaries. The C15 Laves phase has a fcc lattice with a=7.4Å. An alloy of composition Hf14V64Nb22 (including a C15 matrix and a second phase of V-rich bcc solution) was made by arc-melting. The alloy was homogenized at 1200°C for 120h. Preliminary study concentrated on Σ3{<110>/70.53°} grain boundaries in the C15 phase using Philips 400T and CM 30 microscopes.The most-commonly observed morphology of Σ3{<110>/70.53°} grain boundaries in the C15 phase is a faceted boundary. A bright field image (BFI) of the faceted boundary and the corresponding diffraction patterns with the grain boundary edge-on are shown in Fig. 1(a). From the diffraction patterns using a <110> zone axis for both grains, it is obvious that this is a Σ3{<110>/70.53°} grain boundary. Crystallographic analysis shows that the Σ3{<110>/70.53°} grain boundaries selectively facet with the following relationships between the two grains: {111}1//{111}2, {112}1//{112}2, {111}1//{115}2, and {001}1//{221}2.

Weak Links and Critical Current Anisotropy in Melt-Textured HTSC Ceramics Studied by Magneto-Optical Express Control

1996 ◽  
pp. 543-550 ◽  
Author(s):  
A. I. Belyaeva ◽  
V. V. Eremenko ◽  
L. A. Kotok ◽  
S. E. Logvinova ◽  
V. A. Nastenko
Keyword(s):  
Critical Current ◽  
Weak Links

Grain-boundary links and critical current of tapes

1997 ◽  
Vol 10 (6) ◽  
pp. 444-449 ◽  
Author(s):  
P N Mikheenko ◽  
J Horvat ◽  
Q Y Hu ◽  
M Ionescu ◽  
S X Dou
Keyword(s):  
Grain Boundary ◽  
Critical Current

Effect of ZnO Nano-Oxide Addition on the Superconducting Properties of the (Bi.Pb)2223 Phase

2011 ◽  
Vol 324 ◽  
pp. 241-244 ◽  
Author(s):  
R. Mawassi ◽  
R. Awad ◽  
Mohamad Roumie ◽  
M. Kork ◽  
I. Hassan
Keyword(s):  
Critical Current Density ◽  
Critical Current ◽  
Current Density ◽  
Flux Pinning ◽  
High Temperature Superconductors ◽  
Weak Links ◽  
Superconducting Properties ◽  
X Ray ◽  
Weight Percentage ◽  
Nano Oxide

The major limitation of Bi-system superconductor applications is the intergrain weak links and weak flux pinning capability producing low critical current density of the Bibased phases. In order to enhance these characteristics and other superconducting properties, effective flux pinning centers are introduced into high temperature superconductors. In this work, different weight percentages of ZnO nano oxide were introduced at the final stage of the Bi1.8Pb0.4Sr2Ca2Cu3O10-y superconductor preparation process. Phase characterization was completed by X-ray diffraction (XRD). Exact constitution of the samples was determined using particle induced X-ray emission (PIXE). Granular and microstructure were investigated using scanning electron microscopy (SEM). Electrical resistivity as function of the temperature was carried to evaluate the relative performance of samples, and finally, E-J characteristic curves were obtained at 77K. Using 0.4 ZnO weight percentage, the electrical and granular properties were greatly enhanced, indicating more efficient pinning mechanisms. A critical current density of 949 A/cm2 was obtained which represents more than twice the value obtained for the pure sample (Jc= 445 A/cm2).

Analysis of Electromagnetic Properties of Bulk Superconductors

2021 ◽  
Vol 21 (9) ◽  
pp. 4941-4943
Author(s):  
Sang Heon Lee
Keyword(s):  
Critical Current Density ◽  
Single Crystal ◽  
Critical Current ◽  
Current Density ◽  
Magnetic Force ◽  
Electromagnetic Properties ◽  
Weak Links ◽  
Metallic Silver ◽  
Bulk Superconductor ◽  
Slow Cooling

In the present study, a YBa2Cu3O7−y bulk superconductor added with 5~10 wt% Ag was fabricated employing Sm123 as a seed to produce a superconductive single crystal. Metallic silver was added to the single crystal of YBa2Cu3O7−y to remove defects such as cracks and pores. Electromagnetic properties of the bulk superconductor at 77 K were analyzed based on relationships of magnetic levitation, trapped magnetic force, and critical current density. The critical current density of the superconductor at 77 K and 0 T was 3.53 × 104 A/cm2. Discontinuous points in the distribution of magnetic field lines were not observed, implying that these two specimens grew well as a single crystal without specific weak links. For the growth of a superconductive nano crystal employing slow cooling at temperature of formation of 123 phase, superconductive nano crystals were aligned in a-b direction, the direction of peak current flow. The peak value of the trapped magnetic force of the YBa2Cu3O7−y superconductor specimen was 3.23 kG. Using the FC method, peak forces of attraction and repulsion were 21.696 N and 70.168 N, respectively.

Structural and phase equilibria studies in the system Pt-Fe-Cu and the occurrence of tulameenite (Pt2FeCu)

1985 ◽  
Vol 49 (353) ◽  
pp. 547-554 ◽  
Author(s):  
M. Shahmiri ◽  
S. Murphy ◽  
D. J. Vaughan
Keyword(s):  
Crystal Structure ◽  
Solid Solution ◽  
Critical Temperature ◽  
Grain Boundary ◽  
Phase Region ◽  
X Ray Diffraction ◽  
Two Phase ◽  
Slow Cooling ◽  
X Ray ◽  
Diffraction Patterns

AbstractThe crystal structure and compositional limits of the ternary compound Pt2FeCu (tulameenite), formed either by quenching from above the critical temperature of 1178°C or by slow cooling, have been investigated using X-ray diffraction, transmission electron microscopy, differential thermal analysis and electron probe microanalysis.The crystal structure of Pt2FeCu, established using electron density maps constructed from the measured and calculated intensities of X-ray diffraction patterns of powdered specimens, has the (000) and (½½0) lattice sites occupied by Pt atoms and the (½0½) and (0½½) sites occupied by either Cu or Fe atoms in a random manner. The resulting face-centred tetragonal structure undergoes a disordering transformation at the critical temperature to a postulated non-quenchable face-centred cubic structure. Stresses on quenching, arising from the ordering reaction, are relieved by twinning along {101} planes or by recrystallization along with deformation twinning; always involving grain boundary fracturing.Phase relations in the system Pt-Fe-Cu have been investigated through the construction of isothermal sections at 1000 and 600°C. At 1000°C there is an extensive single phase region of solid solution around Pt2FeCu and extending to the binary composition PtFe. At 600°C the composition Pt2FeCu lies just outside this now reduced area of solid solution in a two-phase field. Comparison of the experimental results with data for tulameenite suggests that some observed compositions may be metastably preserved. The occurrence of fine veinlets of silicate or other gangue minerals in tulameenite is suggested to result from grain boundary fracturing on cooling below the critical temperature of 1178°C and to be evidence of a magmatic origin.

Critical current in high Tc grain boundary junctions

1998 ◽  
Vol 84 (7) ◽  
pp. 3972-3979 ◽  
Author(s):  
Jerome A. Luine ◽  
Vladimir Z. Kresin
Keyword(s):  
Grain Boundary ◽  
Critical Current ◽  
High Tc
Sign in / Sign up

Export Citation Format

Share Document