Relationship of the relativistic Compton cross section to the momentum distribution of bound electron states. II. Effects of anisotropy and polarization

1975 ◽  
Vol 12 (8) ◽  
pp. 3136-3141 ◽  
Author(s):  
Roland Ribberfors
Keyword(s):  
Cross Section ◽  
Momentum Distribution ◽  
Electron States ◽  
Relationship Of ◽  
Bound Electron

Optimization Analysis of the Wedge Block Surface of NYD Contact Backstop

2013 ◽  
Vol 433-435 ◽  
pp. 2277-2281
Author(s):  
Quan Wei Wang ◽  
Ming Hui Wang ◽  
Dong Li ◽  
Dian Mao Wan ◽  
Rong Meng
Keyword(s):  
Cross Section ◽  
Design Parameters ◽  
Optimization Analysis ◽  
Archimedes Spiral ◽  
The Cross ◽  
Section Curve ◽  
Relationship Of ◽  
The Relationship

By analyzing the relationship of the design parameters of NYD contact backstop, the cross-section curve of the wedge block has been discussed as Archimedes spiral, logarithm spiral and arc. Each curve is designed optimally using MATLAB optimization toolbox. The merits and drawbacks of each curve are discussed.

The probe particle scattering cross-section off the many-fermion systems in the impulse approximation

2021 ◽  
Author(s):  
Yahya Younesizadeh ◽  
Fayzollah Younesizadeh
Keyword(s):  
Experimental Data ◽  
Distribution Function ◽  
Spectral Function ◽  
Cross Section ◽  
Response Function ◽  
Momentum Distribution ◽  
Impulse Approximation ◽  
System Response ◽  
Probe Particle ◽  
Momentum Distribution Function

In this work, we study the differential scattering cross-section (DSCS) in the first-order Born approximation. It is not difficult to show that the DSCS can be simplified in terms of the system response function. Also, the system response function has this property to be written in terms of the spectral function and the momentum distribution function in the impulse approximation (IA) scheme. Therefore, the DSCS in the IA scheme can be formulated in terms of the spectral function and the momentum distribution function. On the other hand, the DSCS for an electron off the [Formula: see text] and [Formula: see text] nuclei is calculated in the harmonic oscillator shell model. The obtained results are compared with the experimental data, too. The most important result derived from this study is that the calculated DSCS in terms of the spectral function has a high agreement with the experimental data at the low-energy transfer, while the obtained DSCS in terms of the momentum distribution function does not. Therefore, we conclude that the response of a many-fermion system to a probe particle in IA must be written in terms of the spectral function for getting accurate theoretical results in the field of collision. This is another important result of our study.

Relationships among pressure, tension, and shape of the diaphragm

1983 ◽  
Vol 55 (6) ◽  
pp. 1899-1905 ◽  
Author(s):  
W. A. Whitelaw ◽  
L. E. Hajdo ◽  
J. A. Wallace
Keyword(s):  
Cross Section ◽  
Radius Of Curvature ◽  
Transdiaphragmatic Pressure ◽  
Rib Cage ◽  
Residual Capacity ◽  
Best Fitting ◽  
Pressure Generator ◽  
Free Membrane ◽  
Relationship Of ◽  
Shape Changes

The shape of the diaphragm dome was calculated from transdiaphragmatic pressure and tension in the diaphragm. It was assumed that the muscle acts as a free membrane, attached at its edges to the inside of a vertical rib cage circular in cross section, that the attachments are inferior to the point at which the dome makes contract with the rib cage, and that the abdomen is filled with fluid with a hydrostatic gradient in pressure. The shape is different from a section of a sphere, with a radius of curvature substantially greater at the apex of the dome than at the sides. Observed shapes of human hemidiaphragm domes at functional residual capacity are not spherical but closely match the calculated shapes. Best-fitting shapes correspond to transdiaphragmatic pressures of about 3 cmH2O transdiaphragmatic pressure, suggesting that such a pressure and corresponding tension are present in the human diaphragm when it is at rest in an erect subject. In this model; as lung volume increases and the diaphragm shortens, its shape changes in such a way that the ratio between transdiaphragmatic pressure and tension in the diaphragm remains nearly constant, rather than increasing with volume. Such a model can explain the observation that the length-tension relationship of the muscle is much more important than curvature in determining the effectiveness of the diaphragm as a pressure generator.

A Sacrificial Method for Fabricating Microchannel Accelerated by Galvanic Corrosion

2005 ◽  
Author(s):  
Hongjun Zeng ◽  
Alan Feinerman ◽  
Zhiliang Wan
Keyword(s):  
Cross Section ◽  
Etch Rate ◽  
Galvanic Corrosion ◽  
Channel Width ◽  
Etching Time ◽  
Sem Images ◽  
Sacrificial Material ◽  
Relationship Of ◽  
The Relationship

A metal sacrificial method has been investigated for creation of microchannels by galvanic corrosion in a metal multilayer. To achieve the fastest sacrificial metal combination, different metals and the corresponding etchants are chosen. Channels from 50 μm to 1 μm wide, 0.2 μm high, and 1500 μm long, as well as the channel array is fabricated, using Cr/Cu galvanic metal couple as sacrificial material. The relationship between the etching front vs. the etching time, and the relationship of the etch rate vs. channel width is measured and compared with the etching performance of the single metal. The measurement shows there is approximately 10 times faster etching in the galvanic coupled metals than that in the single metal. SEM images of the channels and channel array made by this method are presented. This method is compatible with the conventional VLSI process, and has the potential for fabricating microchannels with submicron or even nanometer cross section.

Production cross-section of heavy flavored hadrons in pp collision at s = 7 TeV

2019 ◽  
Vol 34 (19) ◽  
pp. 1950150 ◽  
Author(s):  
Muhammad Ajaz ◽  
Irfan Khan ◽  
M. K. Suleymanov
Keyword(s):  
Experimental Data ◽  
Transverse Momentum ◽  
Differential Cross Section ◽  
Cross Section ◽  
Momentum Distribution ◽  
Cross Sections ◽  
Production Cross ◽  
Center Of Mass ◽  
Transverse Momentum Distribution ◽  
Mass Frame

The transverse momentum distribution of the differential production cross-sections of heavy flavored charm hadrons [Formula: see text], [Formula: see text] in pp collisions at 7 TeV are simulated. Predictions of DPMJETIII.17-1, HIJING1.383 and Sibyll2.3c are compared to the differential cross-section measurements of the LHCb experimental data presented in the region of [Formula: see text] and [Formula: see text], where the pp center of mass frame is used to measure the transverse momentum and rapidity. The models reproduce only some regions of [Formula: see text] and/or bins of [Formula: see text] but none of them predict completely all the [Formula: see text] bins over the entire [Formula: see text] range.

Sign in / Sign up

Export Citation Format

Share Document