scholarly journals Root morphology and exudate availability is shaped by particle size and chemistry in Brachypodium distachyon

2019 ◽  
Author(s):  
Joelle Sasse ◽  
Jacob S. Jordan ◽  
Markus DeRaad ◽  
Katherine Whiting ◽  
Katherina Zhalnina ◽  
...  

AbstractRoot morphology and exudation define a plants sphere of influence in soils, and are in turn shaped by the physiochemical characteristics of soil. We explored how particle size and chemistry of growth substrates affect root morphology and exudation of the model grass Brachypodium distachyon. Root fresh weight and root lengths were correlated with particle size, whereas root number and shoot weight remained constant. Mass spectrometry imaging suggested that both, root length and number shape root exudation. Exudate metabolite profiles detected with liquid chromatography / mass spectrometry were comparable for plants growing in glass beads or sand with various particles sizes, but distinct for plants growing in clay. However, when exudates of clay-grown plants were collected by removing the plants from the substrate, their exudate profile was similar to sand- or glass beads-grown plants. Clay particles sorbed 20% of compounds exuded by clay-grown plants, and 70% of compounds of a defined exudate medium. The sorbed compounds belonged to a range of chemical classes, among them nucleosides/nucleotides, organic acids, sugars, and amino acids. Some of the sorbed compounds could be de-sorbed by a rhizobacterium (Pseudomonas fluorescens WCS415), supporting its growth. We show that root morphology is affected by substrate size, and that root exudation in contrast is not affected by substrate size or chemistry. The availability of exuded compounds, however, depends on the substrate present. These findings further support the critical importance of the physiochemical properties of soils are crucial to consider when investigating plant morphology, exudation, and plant-microbe interactions.

Plant Direct ◽  
2020 ◽  
Vol 4 (7) ◽  
Author(s):  
Joelle Sasse ◽  
Suzanne M. Kosina ◽  
Markus Raad ◽  
Jacob S. Jordan ◽  
Katherine Whiting ◽  
...  

2018 ◽  
Author(s):  
Joelle Sasse ◽  
Josefine Kant ◽  
Benjamin J Cole ◽  
Andrew P Klein ◽  
Borjana Arsova ◽  
...  

There is a dynamic reciprocity between plants and their environment: On one hand, the physiochemical properties of soil influence plant morphology and metabolism, while on the other, root morphology and exudates shape the environment surrounding roots. Here, we investigate both of these aspects as well as the reproducibility of these responses across laboratories. The model grass Brachypodium distachyon was grown in phosphate-sufficient and phosphate-deficient mineral media, as well as in sterile soil extract, within fabricated ecosystem (EcoFAB) devices across four laboratories. Tissue weight and phosphate content, total root length, root tissue and exudate metabolic profiles were found to be consistent across laboratories and distinct between experimental treatments. Plants grown in soil extract were morphologically and metabolically distinct in all laboratories, with root hairs four times longer compared to other growth conditions. Further, plants depleted half of the investigated metabolites from the soil extract. To interact with their environment, plants not only adapt morphology and release complex metabolite mixtures; they also selectively deplete a range of soil-derived metabolites. The EcoFABs utilized here generated high inter-laboratory reproducibility, demonstrating that their value in standardized investigations of plant traits.


Minerals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 426
Author(s):  
Behrooz Abbasi ◽  
Xiaoliang Wang ◽  
Judith C. Chow ◽  
John G. Watson ◽  
Bijan Peik ◽  
...  

Respirable coal mine dust (RCMD) exposure is associated with black lung and silicosis diseases in underground miners. Although only RCMD mass and silica concentrations are regulated, it is possible that particle size, surface area, and other chemical constituents also contribute to its adverse health effects. This review summarizes measurement technologies for RCMD mass concentrations, morphology, size distributions, and chemical compositions, with examples from published efforts where these methods have been applied. Some state-of-the-art technologies presented in this paper have not been certified as intrinsically safe, and caution should be exerted for their use in explosive environments. RCMD mass concentrations are most often obtained by filter sampling followed by gravimetric analysis, but recent requirements for real-time monitoring by continuous personal dust monitors (CPDM) enable quicker exposure risk assessments. Emerging low-cost photometers provide an opportunity for a wider deployment of real-time exposure assessment. Particle size distributions can be determined by microscopy, cascade impactors, aerodynamic spectrometers, optical particle counters, and electrical mobility analyzers, each with unique advantages and limitations. Different filter media are required to collect integrated samples over working shifts for comprehensive chemical analysis. Teflon membrane filters are used for mass by gravimetry, elements by energy dispersive X-ray fluorescence, rare-earth elements by inductively coupled plasma-mass spectrometry and mineralogy by X-ray diffraction. Quartz fiber filters are analyzed for organic, elemental, and brown carbon by thermal/optical methods and non-polar organics by thermal desorption-gas chromatography-mass spectrometry. Polycarbonate-membrane filters are analyzed for morphology and elements by scanning electron microscopy (SEM) with energy dispersive X-ray, and quartz content by Fourier-transform infrared spectroscopy and Raman spectroscopy.


2011 ◽  
Vol 193 (2) ◽  
pp. 376-386 ◽  
Author(s):  
José M. Barrero ◽  
John V. Jacobsen ◽  
Mark J. Talbot ◽  
Rosemary G. White ◽  
Stephen M. Swain ◽  
...  

2015 ◽  
Vol 30 (12) ◽  
pp. 2412-2419 ◽  
Author(s):  
Ryo Machida ◽  
Takashi Nakazawa ◽  
Yuka Sakuraba ◽  
Masahide Fujiwara ◽  
Naoki Furuta

Size-related elemental fractionation during LAL sampling was investigated separately from elemental fractionation in the ICP and the elemental fractionation in the ICP was larger than that observed during LAL sampling.


Author(s):  
Risa Okita ◽  
Yongli Zhang ◽  
Brenton S. McLaury ◽  
Siamack A. Shirazi ◽  
Edmund F. Rybicki

Although solid particle erosion has been examined extensively in the literature for dry gas and vacuum conditions, several parameters affecting solid particle erosion in liquids are not fully understood and need additional investigation. In this investigation, erosion ratios of two materials have been measured in gas and also in liquids with various liquid viscosities and abrasive particle sizes and shapes. Solid particle erosion ratios for aluminum 6061-T6 and 316 stainless steel have been measured for a direct impingement flow condition using a submerged jet geometry, with liquid viscosities of 1, 10, 25, and 50 cP. Sharp and rounded sand particles with average sizes of 20, 150, and 300 μm, as well as spherical glass beads with average sizes of 50, 150 and 350 μm, were used as abrasives. To make comparisons of erosion in gas and liquids, erosion ratios of the same materials in air were measured for sands and glass beads with the particle sizes of 150 and 300 μm. Based on these erosion measurements in gas and liquids, several important observations were made: (1) Particle size did not affect the erosion magnitude for gas while it did for viscous liquids. (2) Although aluminum and stainless steel have significant differences in hardness and material characteristics, the mass losses of these materials were nearly the same for the same mass of impacting particles in both liquid and gas. (3) The most important observation from these erosion tests is that the shape of the particles did not significantly affect the trend of erosion results as liquid viscosity varied. This has an important implication on particle trajectory modeling where it is generally assumed that particles are spherical in shape. Additionally, the particle velocities measured with the Laser Doppler Velocimetry (LDV) near the wall were incorporated into the erosion equations to predict the erosion ratio in liquid for each test condition. The calculated erosion ratios are compared to the measured erosion ratios for the liquid case. The calculated results agree with the trend of the experimental data.


2018 ◽  
Vol 93 (6) ◽  
pp. 1088-1101 ◽  
Author(s):  
Yinjia Li ◽  
Sheng Zuo ◽  
Zhiliang Zhang ◽  
Zhanjie Li ◽  
Jinlei Han ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document