scholarly journals Real-time computation of the TMS-induced electric field in a realistic head model

2019 ◽  
Author(s):  
Matti Stenroos ◽  
Lari Koponen
Keyword(s):  
Electric Field ◽  
Real Time ◽  
Total Error ◽  
Realistic Model ◽  
Spherical Approximation ◽  
Head Model ◽  
Dependent Part ◽  
Precise Adjustment ◽  
Realistic Head Model ◽  
The Difference

AbstractBackgroundTranscranial magnetic stimulation (TMS) is often targeted using a model of TMS-induced electric field (E). In such navigated TMS, the E-field models have been based on spherical approximation of the head. Such models omit the effects of cerebrospinal fluid (CSF) on the E-field, leading to potentially large errors in the computed field. So far, realistic models have been too slow for interactive TMS navigation.ObjectiveWe present computational methods that enable real-time solving of the E-field in a realistic head model that contains the CSF.MethodsUsing reciprocity and Geselowitz integral equation, we separate the computations to coil-dependent and -independent parts. For the coil-dependent part of Geselowitz integrals, we present a fast numerical quadrature. Further, we present a moment-matching approach for optimizing dipole-based coil models. We verify the new methods using simulations in a realistic head model that contains the brain, CSF, skull, and scalp.ResultsThe new quadrature introduces a relative error of 1.1%. The total error of the quadrature and coil model was 1.43% and 1.15% for coils with 38 and 76 dipoles, respectively. The difference between our head model and a simpler realistic model that omits the CSF was 29%. Using a standard PC and a 38-dipole coil, our solver computed the E-field in 84 coil positions per second in 20000 points on the cortex.ConclusionThe presented methods enable real-time solving of the TMS-induced E-field in a realistic head model that contains the CSF. The new methodology allows more accurate targeting and precise adjustment of intensity during experimental or clinical TMS mapping.

Impact Assessment of Dynamic Characteristics on the Hydraulic Driven Machinery Operation

2018 ◽  
pp. 1-12
Author(s):  
A. D. Terenteva
Keyword(s):  
Dynamic Error ◽  
Total Error ◽  
Soil Layer ◽  
Hydraulic Drive ◽  
Hydraulic Cylinder ◽  
Working Mechanism ◽  
Automated Control ◽  
Vertical Coordinate ◽  
Construction Machinery ◽  
The Difference

In civil engineering in Russia, trenching for utilities is currently under digging. To perform such works, it is necessary to use high-precision construction machinery, because inaccurate performance of works can lead to the break down of existing utilities, thereby affecting the residents of nearby houses and demanding the additional works for renewal.The most universal labour saver to perform construction works is hydraulic driven single-bucket excavators, which provide up to 38% of works. Therefore, to improve technical characteristics that affect the accuracy of the work performed is an important task.High requirements for the performance of works are defined by existing construction regulations: an allowable soil layer to remain is at most 0.05 m. To fulfil such requirements, an exact assessment of the working mechanism position and a trench profile is necessary.Examination of a manually operated digging process shows that an operator provides operations untimely, however an automated control system can solve this problem. Dynamic phenomena in the working mechanism have the greatest impact on the accuracy of the works performed.To assess the bucket digging edge position accuracy, a mathematical model of the working mechanism has been created. Based on the cycle scheme of the working process, the excessive displacements of the hydraulic cylinder rods under the load are taken into account. By the end of the cycle, the difference between the specified and obtained positions along the vertical coordinate has been 0.0892 m.A dynamic error of the hydraulic drive system of the working mechanism is considered as a sum of the error due to excessive displacements of the hydraulic cylinder rods and the error due to delay of the hydraulic drive, with the latter being calculated for the average time of delay taking into account the data available in the literature. The total error of the bucket digging edge position of the working mechanism is 0.1176 m, which is 2 times more than the value of 0.05 mConformity of all the links with specification requirements does not guarantee compliance with the required displacement accuracy of the bucket digging edge, and, thus, the soil layer to remain in the base of the trench can exceed the regulated value of 0.05 m.

scholarly journals Universal Stokes’s nanomechanical viscometer

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Komal Chaudhary ◽  
Pooja Munjal ◽  
Kamal P. Singh
Keyword(s):  
Electric Field ◽  
Real Time ◽  
Sample Volume ◽  
Capillary Waves ◽  
Small Sample ◽  
Medical Applications ◽  
Rapid Measurement ◽  
Single Lens ◽  
Universal Applicability ◽  
Small Sample Volume

AbstractAlthough, many conventional approaches have been used to measure viscosity of fluids, most methods do not allow non-contact, rapid measurements on small sample volume and have universal applicability to all fluids. Here, we demonstrate a simple yet universal viscometer, as proposed by Stokes more than a century ago, exploiting damping of capillary waves generated electrically and probed optically with sub-nanoscale precision. Using a low electric field local actuation of fluids we generate quasi-monochromatic propagating capillary waves and employ a pair of single-lens based compact interferometers to measure attenuation of capillary waves in real-time. Our setup allows rapid measurement of viscosity of a wide variety of polar, non-polar, transparent, opaque, thin or thick fluids having viscosity values varying over four orders of magnitude from $$10^{0}{-}10^{4}~\text{mPa} \, \text{s}$$ 10 0 - 10 4 mPa s . Furthermore, we discuss two additional damping mechanisms for nanomechanical capillary waves caused by bottom friction and top nano-layer appearing in micro-litre droplets. Such self-stabilized droplets when coupled with precision interferometers form interesting microscopic platform for picomechanical optofluidics for fundamental, industrial and medical applications.

scholarly journals A “Smart” Biosensor-Enabled Intravascular Catheter and Platform for Dynamic Delivery of Propofol to “Close the Loop” for Total Intravenous Anesthesia

2021 ◽  
Vol 186 (Supplement_1) ◽  
pp. 370-377
Author(s):  
Edward Chaum ◽  
Ernő Lindner
Keyword(s):  
Real Time ◽  
Drug Distribution ◽  
Population Based ◽  
Pharmacokinetic Data ◽  
Drug Infusion ◽  
Blood Concentrations ◽  
The Usa ◽  
The Difference ◽  
Automated Delivery

ABSTRACT Background Target-controlled infusion anesthesia is used worldwide to provide user-defined, stable, blood concentrations of propofol for sedation and anesthesia. The drug infusion is controlled by a microprocessor that uses population-based pharmacokinetic data and patient biometrics to estimate the required infusion rate to replace losses from the blood compartment due to drug distribution and metabolism. The objective of the research was to develop and validate a method to detect and quantify propofol levels in the blood, to improve the safety of propofol use, and to demonstrate a pathway for regulatory approval for its use in the USA. Methods We conceptualized and prototyped a novel “smart” biosensor-enabled intravenous catheter capable of quantifying propofol at physiologic levels in the blood, in real time. The clinical embodiment of the platform is comprised of a “smart” biosensor-enabled catheter prototype, a signal generation/detection readout display, and a driving electronics software. The biosensor was validated in vitro using a variety of electrochemical methods in both static and flow systems with biofluids, including blood. Results We present data demonstrating the experimental detection and quantification of propofol at sub-micromolar concentrations using this biosensor and method. Detection of the drug is rapid and stable with negligible biofouling due to the sensor coating. It shows a linear correlation with mass spectroscopy methods. An intuitive graphical user interface was developed to: (1) detect and quantify the propofol sensor signal, (2) determine the difference between targeted and actual propofol concentration, (3) communicate the variance in real time, and (4) use the output of the controller to drive drug delivery from an in-line syringe pump. The automated delivery and maintenance of propofol levels was demonstrated in a modeled benchtop “patient” applying the known pharmacokinetics of the drug using published algorithms. Conclusions We present a proof-of-concept and in vitro validation of accurate electrochemical quantification of propofol directly from the blood and the design and prototyping of a “smart,” indwelling, biosensor-enabled catheter and demonstrate feedback hardware and software architecture permitting accurate measurement of propofol in blood in real time. The controller platform is shown to permit autonomous, “closed-loop” delivery of the drug and maintenance of user-defined propofol levels in a dynamic flow model.

scholarly journals Tuning Single-Molecule Conductance by Controlled Electric Field-Induced trans-to-cis Isomerisation

2021 ◽  
Vol 11 (8) ◽  
pp. 3317
Author(s):  
C.S. Quintans ◽  
Denis Andrienko ◽  
Katrin F. Domke ◽  
Daniel Aravena ◽  
Sangho Koo ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Single Molecule ◽  
Quantum Interference ◽  
Single Molecule Level ◽  
Wet Chemical Synthesis ◽  
Single Molecule Junctions ◽  
Tunnelling Microscopy ◽  
The Difference

External electric fields (EEFs) have proven to be very efficient in catalysing chemical reactions, even those inaccessible via wet-chemical synthesis. At the single-molecule level, oriented EEFs have been successfully used to promote in situ single-molecule reactions in the absence of chemical catalysts. Here, we elucidate the effect of an EEFs on the structure and conductance of a molecular junction. Employing scanning tunnelling microscopy break junction (STM-BJ) experiments, we form and electrically characterize single-molecule junctions of two tetramethyl carotene isomers. Two discrete conductance signatures show up more prominently at low and high applied voltages which are univocally ascribed to the trans and cis isomers of the carotenoid, respectively. The difference in conductance between both cis-/trans- isomers is in concordance with previous predictions considering π-quantum interference due to the presence of a single gauche defect in the trans isomer. Electronic structure calculations suggest that the electric field polarizes the molecule and mixes the excited states. The mixed states have a (spectroscopically) allowed transition and, therefore, can both promote the cis-isomerization of the molecule and participate in electron transport. Our work opens new routes for the in situ control of isomerisation reactions in single-molecule contacts.

scholarly journals A Modified KNN Algorithm for High-Performance Computing on FPGA of Real-Time m-QAM Demodulators

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 627
Author(s):  
David Marquez-Viloria ◽  
Luis Castano-Londono ◽  
Neil Guerrero-Gonzalez
Keyword(s):  
Real Time ◽  
High Performance ◽  
Interference Mitigation ◽  
Parallel Implementation ◽  
Computational Time ◽  
Successful Implementation ◽  
Interchannel Interference ◽  
The Difference ◽  
High Level ◽  
Performance Computing

A methodology for scalable and concurrent real-time implementation of highly recurrent algorithms is presented and experimentally validated using the AWS-FPGA. This paper presents a parallel implementation of a KNN algorithm focused on the m-QAM demodulators using high-level synthesis for fast prototyping, parameterization, and scalability of the design. The proposed design shows the successful implementation of the KNN algorithm for interchannel interference mitigation in a 3 × 16 Gbaud 16-QAM Nyquist WDM system. Additionally, we present a modified version of the KNN algorithm in which comparisons among data symbols are reduced by identifying the closest neighbor using the rule of the 8-connected clusters used for image processing. Real-time implementation of the modified KNN on a Xilinx Virtex UltraScale+ VU9P AWS-FPGA board was compared with the results obtained in previous work using the same data from the same experimental setup but offline DSP using Matlab. The results show that the difference is negligible below FEC limit. Additionally, the modified KNN shows a reduction of operations from 43 percent to 75 percent, depending on the symbol’s position in the constellation, achieving a reduction 47.25% reduction in total computational time for 100 K input symbols processed on 20 parallel cores compared to the KNN algorithm.

Investigation on dynamic holographic display in liquid crystal film doped with carbon dots

2020 ◽  
Vol 10 (6) ◽  
pp. 780-787
Author(s):  
Hongyue Gao ◽  
Suna Li ◽  
Jicheng Liu ◽  
Wen Zhou ◽  
Fan Xu ◽  
...  
Keyword(s):  
Liquid Crystal ◽  
Electric Field ◽  
Real Time ◽  
Diffraction Efficiency ◽  
Carbon Dots ◽  
Applied Electric Field ◽  
Light Polarization ◽  
Forming Process ◽  
Time Dynamic ◽  
Holographic Display

In this paper, we studied the holographic properties of liquid crystal (LC) thin film doped with carbon dots (CDs) which can be used as real-time holographic display screen. The maximum value of diffraction efficiency can reach up to 30% by using a low applied electric field 0.2 V/μm. Holograms in the LC film can be dynamically formed and self-erased. The hologram build-up time and the hologram self-erasure time in the material is fast enough to realize video refresh rate. In addition, the forming process of hologram was studied. The holographic diffraction efficiency was measured depending on the intensity of recording light, applied electric field, the intensity of readout light, and readout light polarization direction. Triple enhancement of the diffraction efficiency value by the modulation of voltage under the condition of low recording energy is presented. Therefore, we develop an easy way to obtain real-time dynamic holographic red, green and blue displays with high diffraction efficiency, which allow the LC film doped with CDs to be used as a holographic 3D display screen.

Sign in / Sign up

Export Citation Format

Share Document