scholarly journals The BK channel gating ring is strongly coupled to the voltage sensor

2018 ◽  
Author(s):  
Pablo Miranda ◽  
Miguel Holmgren ◽  
Teresa Giraldez
Keyword(s):  
Conformational Changes ◽  
Bk Channels ◽  
Bk Channel ◽  
Voltage Sensor ◽  
Voltage Sensitivity ◽  
Divalent Ions ◽  
Gating Currents ◽  
Open Probability ◽  
Voltage Dependent ◽  
Tightly Coupled

ABSTRACTThe open probability of large conductance voltage- and calcium-dependent potassium (BK) channels is regulated allosterically by changes in the transmembrane voltage and intracellular concentration of divalent ions (Ca2+ and Mg2+). The divalent cation sensors reside within the gating ring formed by eight Regulator of Conductance of Potassium (RCK) domains, two from each of the four channel subunits. Overall, the gating ring contains 12 sites that can bind Ca2+ with different affinities. Using patch-clamp fluorometry, we have shown robust changes in FRET signals within the gating ring in response to divalent ions and voltage, which do not directly track open probability. Only the conformational changes triggered through the RCK1 binding site are voltage-dependent in presence of Ca2+. Because the gating ring is outside the electric field, it must gain voltage sensitivity from coupling to the voltage-dependent channel opening, the voltage sensor or both. Here we demonstrate that alterations of voltage sensor dynamics known to shift gating currents produce a cognate shift in the gating ring voltage dependence, whereas changing BK channels’ relative probability of opening had little effect. These results strongly suggest that the conformational changes of the RCK1 domain of the gating ring are tightly coupled to the voltage sensor function, and this interaction is central to the allosteric modulation of BK channels.

scholarly journals Voltage-dependent dynamics of the BK channel cytosolic gating ring are coupled to the membrane-embedded voltage sensor

eLife ◽  
2018 ◽  
Vol 7 ◽  
Author(s):  
Pablo Miranda ◽  
Miguel Holmgren ◽  
Teresa Giraldez
Keyword(s):  
Conformational Changes ◽  
Bk Channels ◽  
Bk Channel ◽  
Voltage Sensor ◽  
Cation Binding ◽  
Voltage Sensitivity ◽  
Open Probability ◽  
Calcium Dependent ◽  
Transmembrane Voltage ◽  
Voltage Dependent

In humans, large conductance voltage- and calcium-dependent potassium (BK) channels are regulated allosterically by transmembrane voltage and intracellular Ca2+. Divalent cation binding sites reside within the gating ring formed by two Regulator of Conductance of Potassium (RCK) domains per subunit. Using patch-clamp fluorometry, we show that Ca2+ binding to the RCK1 domain triggers gating ring rearrangements that depend on transmembrane voltage. Because the gating ring is outside the electric field, this voltage sensitivity must originate from coupling to the voltage-dependent channel opening, the voltage sensor or both. Here we demonstrate that alterations of the voltage sensor, either by mutagenesis or regulation by auxiliary subunits, are paralleled by changes in the voltage dependence of the gating ring movements, whereas modifications of the relative open probability are not. These results strongly suggest that conformational changes of RCK1 domains are specifically coupled to the voltage sensor function during allosteric modulation of BK channels.

scholarly journals Heme Regulates Allosteric Activation of the Slo1 BK Channel

2005 ◽  
Vol 126 (1) ◽  
pp. 7-21 ◽  
Author(s):  
Frank T. Horrigan ◽  
Stefan H. Heinemann ◽  
Toshinori Hoshi
Keyword(s):  
Divalent Cations ◽  
Ionic Currents ◽  
Bk Channels ◽  
Bk Channel ◽  
Voltage Sensor ◽  
Gating Currents ◽  
Calcium Dependent ◽  
Channel Opening ◽  
Activation Gate ◽  
Voltage Dependent

Large conductance calcium-dependent (Slo1 BK) channels are allosterically activated by membrane depolarization and divalent cations, and possess a rich modulatory repertoire. Recently, intracellular heme has been identified as a potent regulator of Slo1 BK channels (Tang, X.D., R. Xu, M.F. Reynolds, M.L. Garcia, S.H. Heinemann, and T. Hoshi. 2003. Nature. 425:531–535). Here we investigated the mechanism of the regulatory action of heme on heterologously expressed Slo1 BK channels by separating the influences of voltage and divalent cations. In the absence of divalent cations, heme generally decreased ionic currents by shifting the channel's G–V curve toward more depolarized voltages and by rendering the curve less steep. In contrast, gating currents remained largely unaffected by heme. Simulations suggest that a decrease in the strength of allosteric coupling between the voltage sensor and the activation gate and a concomitant stabilization of the open state account for the essential features of the heme action in the absence of divalent ions. At saturating levels of divalent cations, heme remained similarly effective with its influence on the G–V simulated by weakening the coupling of both Ca2+ binding and voltage sensor activation to channel opening. The results thus show that heme dampens the influence of allosteric activators on the activation gate of the Slo1 BK channel. To account for these effects, we consider the possibility that heme binding alters the structure of the RCK gating ring and thereby disrupts both Ca2+- and voltage-dependent gating as well as intrinsic stability of the open state.

scholarly journals Deletion of cytosolic gating ring decreases gate and voltage sensor coupling in BK channels

2017 ◽  
Vol 149 (3) ◽  
pp. 373-387 ◽  
Author(s):  
Guohui Zhang ◽  
Yanyan Geng ◽  
Yakang Jin ◽  
Jingyi Shi ◽  
Kelli McFarland ◽  
...  
Keyword(s):  
Bk Channels ◽  
Bk Channel ◽  
Voltage Sensor ◽  
Voltage Sensitivity ◽  
Gating Currents ◽  
Voltage Sensors ◽  
Transmembrane Voltage ◽  
Wide Range ◽  
Activation Gate ◽  
Sensor Activation

Large conductance Ca2+-activated K+ channels (BK channels) gate open in response to both membrane voltage and intracellular Ca2+. The channel is formed by a central pore-gate domain (PGD), which spans the membrane, plus transmembrane voltage sensors and a cytoplasmic gating ring that acts as a Ca2+ sensor. How these voltage and Ca2+ sensors influence the common activation gate, and interact with each other, is unclear. A previous study showed that a BK channel core lacking the entire cytoplasmic gating ring (Core-MT) was devoid of Ca2+ activation but retained voltage sensitivity (Budelli et al. 2013. Proc. Natl. Acad. Sci. USA. http://dx.doi.org/10.1073/pnas.1313433110). In this study, we measure voltage sensor activation and pore opening in this Core-MT channel over a wide range of voltages. We record gating currents and find that voltage sensor activation in this truncated channel is similar to WT but that the coupling between voltage sensor activation and gating of the pore is reduced. These results suggest that the gating ring, in addition to being the Ca2+ sensor, enhances the effective coupling between voltage sensors and the PGD. We also find that removal of the gating ring alters modulation of the channels by the BK channel’s β1 and β2 subunits.

scholarly journals Closed state-coupled C-type inactivation in BK channels

2016 ◽  
Vol 113 (25) ◽  
pp. 6991-6996 ◽  
Author(s):  
Jiusheng Yan ◽  
Qin Li ◽  
Richard W. Aldrich
Keyword(s):  
Conformational Changes ◽  
Bk Channels ◽  
Bk Channel ◽  
Membrane Potentials ◽  
Selectivity Filter ◽  
Open Probability ◽  
Closed State ◽  
State Dependent ◽  
Channel Opening ◽  
Activation Gate

Ion channels regulate ion flow by opening and closing their pore gates. K+ channels commonly possess two pore gates, one at the intracellular end for fast channel activation/deactivation and the other at the selectivity filter for slow C-type inactivation/recovery. The large-conductance calcium-activated potassium (BK) channel lacks a classic intracellular bundle-crossing activation gate and normally show no C-type inactivation. We hypothesized that the BK channel’s activation gate may spatially overlap or coexist with the C-type inactivation gate at or near the selectivity filter. We induced C-type inactivation in BK channels and studied the relationship between activation/deactivation and C-type inactivation/recovery. We observed prominent slow C-type inactivation/recovery in BK channels by an extreme low concentration of extracellular K+ together with a Y294E/K/Q/S or Y279F mutation whose equivalent in Shaker channels (T449E/K/D/Q/S or W434F) caused a greatly accelerated rate of C-type inactivation or constitutive C-inactivation. C-type inactivation in most K+ channels occurs upon sustained membrane depolarization or channel opening and then recovers during hyperpolarized membrane potentials or channel closure. However, we found that the BK channel C-type inactivation occurred during hyperpolarized membrane potentials or with decreased intracellular calcium ([Ca2+]i) and recovered with depolarized membrane potentials or elevated [Ca2+]i. Constitutively open mutation prevented BK channels from C-type inactivation. We concluded that BK channel C-type inactivation is closed state-dependent and that its extents and rates inversely correlate with channel-open probability. Because C-type inactivation can involve multiple conformational changes at the selectivity filter, we propose that the BK channel’s normal closing may represent an early conformational stage of C-type inactivation.

scholarly journals Cadmium–cysteine coordination in the BK inner pore region and its structural and functional implications

2015 ◽  
Vol 112 (16) ◽  
pp. 5237-5242 ◽  
Author(s):  
Yu Zhou ◽  
Xiao-Ming Xia ◽  
Christopher J. Lingle
Keyword(s):  
Conformational Changes ◽  
State Dependence ◽  
Bk Channels ◽  
Bk Channel ◽  
Pore Region ◽  
Kv Channel ◽  
Kv Channels ◽  
Voltage Dependent ◽  
Channel Structures ◽  
Inner Pore

To probe structure and gating-associated conformational changes in BK-type potassium (BK) channels, we examined consequences of Cd2+ coordination with cysteines introduced at two positions in the BK inner pore. At V319C, the equivalent of valine in the conserved Kv proline-valine-proline (PVP) motif, Cd2+ forms intrasubunit coordination with a native glutamate E321, which would place the side chains of V319C and E321 much closer together than observed in voltage-dependent K+ (Kv) channel structures, requiring that the proline between V319C and E321 introduces a kink in the BK S6 inner helix sharper than that observed in Kv channel structures. At inner pore position A316C, Cd2+ binds with modest state dependence, suggesting the absence of an ion permeation gate at the cytosolic side of BK channel. These results highlight fundamental structural differences between BK and Kv channels in their inner pore region, which likely underlie differences in voltage-dependent gating between these channels.

scholarly journals The Voltage Sensor in Voltage-Dependent Ion Channels

2000 ◽  
Vol 80 (2) ◽  
pp. 555-592 ◽  
Author(s):  
Francisco Bezanilla
Keyword(s):  
Membrane Potential ◽  
Conformational Changes ◽  
Structural Information ◽  
Noise Analysis ◽  
Voltage Sensor ◽  
Fluorescence Labeling ◽  
Gating Current ◽  
Gating Currents ◽  
Gating Charge ◽  
Voltage Dependent

In voltage-dependent Na, K, or Ca channels, the probability of opening is modified by the membrane potential. This is achieved through a voltage sensor that detects the voltage and transfers its energy to the pore to control its gate. We present here the theoretical basis of the energy coupling between the electric field and the voltage, which allows the interpretation of the gating charge that moves in one channel. Movement of the gating charge constitutes the gating current. The properties are described, along with macroscopic data and gating current noise analysis, in relation to the operation of the voltage sensor and the opening of the channel. Structural details of the voltage sensor operation were resolved initially by locating the residues that make up the voltage sensor using mutagenesis experiments and determining the number of charges per channel. The changes in conformation are then analyzed based on the differential exposure of cysteine or histidine-substituted residues. Site-directed fluorescence labeling is then analyzed as another powerful indicator of conformational changes that allows time and voltage correlation of local changes seen by the fluorophores with the global change seen by the electrophysiology of gating currents and ionic currents. Finally, we describe the novel results on lanthanide-based resonance energy transfer that show small distance changes between residues in the channel molecule. All of the electrophysiological and the structural information are finally summarized in a physical model of a voltage-dependent channel in which a change in membrane potential causes rotation of the S4 segment that changes the exposure of the basic residues from an internally connected aqueous crevice at hyperpolarized potentials to an externally connected aqueous crevice at depolarized potentials.

scholarly journals Fast and slow voltage sensor rearrangements during activation gating in Kv1.2 channels detected using tetramethylrhodamine fluorescence

2010 ◽  
Vol 136 (1) ◽  
pp. 83-99 ◽  
Author(s):  
Andrew James Horne ◽  
Christian Joseph Peters ◽  
Thomas William Claydon ◽  
David Fedida
Keyword(s):  
Conformational Changes ◽  
Time Course ◽  
Slow Component ◽  
Ionic Current ◽  
Voltage Sensor ◽  
Activation Process ◽  
Dependent Manner ◽  
Gating Currents ◽  
Kv Channel ◽  
Voltage Dependent

The Kv1.2 channel, with its high resolution crystal structure, provides an ideal model for investigating conformational changes associated with channel gating, and fluorescent probes attached at the extracellular end of S4 are a powerful way to gain a more complete understanding of the voltage-dependent activity of these dynamic proteins. Tetramethylrhodamine-5-maleimide (TMRM) attached at A291C reports two distinct rearrangements of the voltage sensor domains, and a comparative fluorescence scan of the S4 and S3–S4 linker residues in Shaker and Kv1.2 shows important differences in their emission at other homologous residues. Kv1.2 shows a rapid decrease in A291C emission with a time constant of 1.5 ± 0.1 ms at 60 mV (n = 11) that correlates with gating currents and reports on translocation of the S4 and S3–S4 linker. However, unlike any Kv channel studied to date, this fast component is dwarfed by a larger, slower quenching of TMRM emission during depolarizations between −120 and −50 mV (τ = 21.4 ± 2.1 ms at 60 mV, V1/2 of −73.9 ± 1.4 mV) that is not seen in either Shaker or Kv1.5 and that comprises >60% of the total signal at all activating potentials. The slow fluorescence relaxes after repolarization in a voltage-dependent manner that matches the time course of Kv1.2 ionic current deactivation. Fluorophores placed directly in S1 and S2 at I187 and T219 recapitulate the time course and voltage dependence of slow quenching. The slow component is lost when the extracellular S1–S2 linker of Kv1.2 is replaced with that of Kv1.5 or Shaker, suggesting that it arises from a continuous internal rearrangement within the voltage sensor, initiated at negative potentials but prevalent throughout the activation process, and which must be reversed for the channel to close.

scholarly journals Coupling and cooperativity in voltage activation of a limited-state BK channel gating in saturating Ca2+

2010 ◽  
Vol 135 (5) ◽  
pp. 461-480 ◽  
Author(s):  
Christopher Shelley ◽  
Xiaowei Niu ◽  
Yanyan Geng ◽  
Karl L. Magleby
Keyword(s):  
Single Channel ◽  
Coupling Factor ◽  
Bk Channels ◽  
Bk Channel ◽  
Voltage Sensor ◽  
Channel Kinetics ◽  
Voltage Sensors ◽  
Gating Mechanisms ◽  
Voltage Dependent ◽  
Single Channel Currents

Voltage-dependent gating mechanisms of large conductance Ca2+ and voltage-activated (BK) channels were investigated using two-dimensional maximum likelihood analysis of single-channel open and closed intervals. To obtain sufficient data at negative as well as positive voltages, single-channel currents were recorded at saturating Ca2+ from BK channels mutated to remove the RCK1 Ca2+ and Mg2+ sensors. The saturating Ca2+ acting on the Ca2+ bowl sensors of the resulting BKB channels increased channel activity while driving the gating into a reduced number of states, simplifying the model. Five highly constrained idealized gating mechanisms based on extensions of the Monod-Wyman-Changeux model for allosteric proteins were examined. A 10-state model without coupling between the voltage sensors and the opening/closing transitions partially described the voltage dependence of Po but not the single-channel kinetics. With allowed coupling, the model gave improved descriptions of Po and approximated the single-channel kinetics; each activated voltage sensor increased the opening rate approximately an additional 23-fold while having little effect on the closing rate. Allowing cooperativity among voltage sensors further improved the description of the data: each activated voltage sensor increased the activation rate of the remaining voltage sensors approximately fourfold, with little effect on the deactivation rate. The coupling factor was decreased in models with cooperativity from ∼23 to ∼18. Whether the apparent cooperativity among voltage sensors arises from imposing highly idealized models or from actual cooperativity will require additional studies to resolve. For both cooperative and noncooperative models, allowing transitions to five additional brief (flicker) closed states further improved the description of the data. These observations show that the voltage-dependent single-channel kinetics of BKB channels can be approximated by highly idealized allosteric models in which voltage sensor movement increases Po mainly through an increase in channel opening rates, with limited effects on closing rates.

scholarly journals Voltage and Ca2+ Activation of Single Large-Conductance Ca2+-Activated K+ Channels Described by a Two-Tiered Allosteric Gating Mechanism

2000 ◽  
Vol 116 (1) ◽  
pp. 75-100 ◽  
Author(s):  
Brad S. Rothberg ◽  
Karl L. Magleby
Keyword(s):  
Voltage Dependence ◽  
Single Channel ◽  
Bk Channels ◽  
Bk Channel ◽  
Open Probability ◽  
Gating Charge ◽  
Gating Mechanism ◽  
Single Channel Analysis ◽  
Voltage Dependent ◽  
The Mean

The voltage- and Ca2+-dependent gating mechanism of large-conductance Ca2+-activated K+ (BK) channels from cultured rat skeletal muscle was studied using single-channel analysis. Channel open probability (Po) increased with depolarization, as determined by limiting slope measurements (11 mV per e-fold change in Po; effective gating charge, qeff, of 2.3 ± 0.6 eo). Estimates of qeff were little changed for intracellular Ca2+ (Ca2+i) ranging from 0.0003 to 1,024 μM. Increasing Ca2+i from 0.03 to 1,024 μM shifted the voltage for half maximal activation (V1/2) 175 mV in the hyperpolarizing direction. V1/2 was independent of Ca2+i for Ca2+i ≤ 0.03 μM, indicating that the channel can be activated in the absence of Ca2+i. Open and closed dwell-time distributions for data obtained at different Ca2+i and voltage, but at the same Po, were different, indicating that the major action of voltage is not through concentrating Ca2+ at the binding sites. The voltage dependence of Po arose from a decrease in the mean closing rate with depolarization (qeff = −0.5 eo) and an increase in the mean opening rate (qeff = 1.8 eo), consistent with voltage-dependent steps in both the activation and deactivation pathways. A 50-state two-tiered model with separate voltage- and Ca2+-dependent steps was consistent with the major features of the voltage and Ca2+ dependence of the single-channel kinetics over wide ranges of Ca2+i (∼0 through 1,024 μM), voltage (+80 to −80 mV), and Po (10−4 to 0.96). In the model, the voltage dependence of the gating arises mainly from voltage-dependent transitions between closed (C-C) and open (O-O) states, with less voltage dependence for transitions between open and closed states (C-O), and with no voltage dependence for Ca2+-binding and unbinding. The two-tiered model can serve as a working hypothesis for the Ca2+- and voltage-dependent gating of the BK channel.

scholarly journals Coupling of Ca2+ and voltage activation in BK channels through the αB helix/voltage sensor interface

2020 ◽  
Author(s):  
Yanyan Geng ◽  
Zengqin Deng ◽  
Guohui Zhang ◽  
Gonzalo Budelli ◽  
Alice Butler ◽  
...  
Keyword(s):  
Modular Design ◽  
Cell Types ◽  
Cytoplasmic Domain ◽  
Bk Channels ◽  
Bk Channel ◽  
Voltage Sensor ◽  
Membrane Excitability ◽  
Gating Currents ◽  
Voltage Sensors ◽  
Voltage Activation

AbstractLarge conductance Ca2+ and voltage activated K+ (BK) channels control membrane excitability in many cell types. BK channels are tetrameric. Each subunit is comprised of a voltage sensor domain (VSD), a central pore gate domain, and a large cytoplasmic domain (CTD) that contains the Ca2+ sensors. While it is known that BK channels are activated by voltage and Ca2+, and that voltage and Ca2+ activations interact, less is known about the mechanisms involved. We now explore mechanism by examining the gating contribution of an interface formed between the VSDs and the αB helices located at the top of the CTDs. Proline mutations in the αB helix greatly decreased voltage activation while having negligible effects on gating currents. Analysis with the HCA model indicated a decreased coupling between voltage sensors and pore gate. Proline mutations decreased Ca2+ activation for both Ca2+ bowl and RCK1 Ca2+ sites, suggesting that both high affinity Ca2+ sites transduce their effect, at least in part, through the αB helix. Mg2+ activation was also decreased. The crystal structure of the CTD with proline mutation L390P showed a flattening of the first helical turn in the αB helix compared to WT, without other notable differences in the CTD, indicating structural change from the mutation was confined to the αB helix. These findings indicate that an intact αB helix/VSD interface is required for effective coupling of Ca2+ binding and voltage depolarization to pore opening, and that shared Ca2+ and voltage transduction pathways involving the αB helix may be involved.SignificanceLarge conductance BK (Slo1) K+ channels are activated by voltage, Ca2+, and Mg2+ to modulate membrane excitability in neurons, muscle, and other cells. BK channels are of modular design, with pore-gate and voltage sensors as transmembrane domains and a large cytoplasmic domain CTD containing the Ca2+ sensors. Previous observations suggest that voltage and Ca2+ sensors interact, but less is known about this interaction and its involvement in the gating process. We show that a previously identified structural interface between the CTD and voltage sensors is required for effective activation by both voltage and Ca2+, suggesting that these processes may share common allosteric activation pathways. Such knowledge should help explain disease processes associated with BK channel dysfunction.

Sign in / Sign up

Export Citation Format

Share Document