scholarly journals A Comparison of Temporal Response Function Estimation Methods for Auditory Attention Decoding

2018 ◽  
Author(s):  
Daniel D.E. Wong ◽  
Søren A. Fuglsang ◽  
Jens Hjortkjær ◽  
Enea Ceolini ◽  
Malcolm Slaney ◽  
...  
Keyword(s):  
Performance Metrics ◽  
Predictive Performance ◽  
Auditory Attention ◽  
Estimation Methods ◽  
Model Parameters ◽  
Function Estimation ◽  
Temporal Response ◽  
Current State ◽  
Eeg Data ◽  
Response Function Estimation

ABSTRACTThe decoding of selective auditory attention from noninvasive electroencephalogram (EEG) data is of interest in brain computer interface and auditory perception research. The current state-of-the-art approaches for decoding the attentional selection of listeners are based on temporal response functions (TRFs). In the current context, a TRF is a function that facilitates a mapping between features of sound streams and EEG responses. It has been shown that when the envelope of attended speech and EEG responses are used to derive TRF mapping functions, the TRF model predictions can be used to discriminate between attended and unattended talkers. However, the predictive performance of the TRF models is dependent on how the TRF model parameters are estimated. There exist a number of TRF estimation methods that have been published, along with a variety of datasets. It is currently unclear if any of these methods perform better than others, as they have not yet been compared side by side on a single standardized dataset in a controlled fashion. Here, we present a comparative study of the ability of different TRF estimation methods to classify attended speakers from multi-channel EEG data. The performance of the TRF estimation methods is evaluated using different performance metrics on a set of labeled EEG data from 18 subjects listening to mixtures of two speech streams.

scholarly journals A Model-Based Tool for Assessing the Impact of Land Use Change Scenarios on Flood Risk in Small-Scale River Systems—Part 1: Pre-Processing of Scenario Based Flood Characteristics for the Current State of Land Use

Hydrology ◽  
2021 ◽  
Vol 8 (3) ◽  
pp. 102
Author(s):  
Frauke Kachholz ◽  
Jens Tränckner
Keyword(s):  
Land Use ◽  
River Flow ◽  
Land Use Changes ◽  
Small Rivers ◽  
Small Scale ◽  
Model Parameters ◽  
Ungauged Catchments ◽  
Model Based ◽  
Current State ◽  
The Impact

Land use changes influence the water balance and often increase surface runoff. The resulting impacts on river flow, water level, and flood should be identified beforehand in the phase of spatial planning. In two consecutive papers, we develop a model-based decision support system for quantifying the hydrological and stream hydraulic impacts of land use changes. Part 1 presents the semi-automatic set-up of physically based hydrological and hydraulic models on the basis of geodata analysis for the current state. Appropriate hydrological model parameters for ungauged catchments are derived by a transfer from a calibrated model. In the regarded lowland river basins, parameters of surface and groundwater inflow turned out to be particularly important. While the calibration delivers very good to good model results for flow (Evol =2.4%, R = 0.84, NSE = 0.84), the model performance is good to satisfactory (Evol = −9.6%, R = 0.88, NSE = 0.59) in a different river system parametrized with the transfer procedure. After transferring the concept to a larger area with various small rivers, the current state is analyzed by running simulations based on statistical rainfall scenarios. Results include watercourse section-specific capacities and excess volumes in case of flooding. The developed approach can relatively quickly generate physically reliable and spatially high-resolution results. Part 2 builds on the data generated in part 1 and presents the subsequent approach to assess hydrologic/hydrodynamic impacts of potential land use changes.

Evaluation methods of the daylight performance and potential energy saving of tubular daylight guide systems: A review

2021 ◽  
pp. 1420326X2199241
Author(s):  
Hanlin Li ◽  
Dan Wu ◽  
Yanping Yuan ◽  
Lijun Zuo
Keyword(s):  
Potential Energy ◽  
Energy Saving ◽  
Energy Savings ◽  
Performance Metrics ◽  
Field Measurements ◽  
Building Design ◽  
Estimation Methods ◽  
The Past ◽  
Potential Energy Saving ◽  
Daylight Performance

In the past 30 years, tubular daylight guide systems (TDGSs) have become one of the most popular ways to transport outdoor natural light into the inner space in building design. However, tubular daylight guide systems are not widely used because of the lack of methods to evaluate methods on the suitability of the TDGSs. This study therefore summarizes the daylight performance metrics of TDGSs and presents the estimation methods in terms of field measurements, simulation and empirical formulae. This study focuses on the daylight performance and potential energy savings of TDGSs. Moreover, this study will be helpful for building designers to build healthy, comfortable and energy-saving indoor environment.

scholarly journals Modeling Software Fault-Detection and Fault-Correction Processes by Considering the Dependencies between Fault Amounts

2021 ◽  
Vol 11 (15) ◽  
pp. 6998
Author(s):  
Qiuying Li ◽  
Hoang Pham
Keyword(s):  
Time Delay ◽  
Fault Detection ◽  
Software Reliability ◽  
Growth Models ◽  
Predictive Performance ◽  
Real Data ◽  
Reliability Estimation ◽  
Model Parameters ◽  
Dual Processes ◽  
Correction Process

Many NHPP software reliability growth models (SRGMs) have been proposed to assess software reliability during the past 40 years, but most of them have focused on modeling the fault detection process (FDP) in two ways: one is to ignore the fault correction process (FCP), i.e., faults are assumed to be instantaneously removed after the failure caused by the faults is detected. However, in real software development, it is not always reliable as fault removal usually needs time, i.e., the faults causing failures cannot always be removed at once and the detected failures will become more and more difficult to correct as testing progresses. Another way to model the fault correction process is to consider the time delay between the fault detection and fault correction. The time delay has been assumed to be constant and function dependent on time or random variables following some kind of distribution. In this paper, some useful approaches to the modeling of dual fault detection and correction processes are discussed. The dependencies between fault amounts of dual processes are considered instead of fault correction time-delay. A model aiming to integrate fault-detection processes and fault-correction processes, along with the incorporation of a fault introduction rate and testing coverage rate into the software reliability evaluation is proposed. The model parameters are estimated using the Least Squares Estimation (LSE) method. The descriptive and predictive performance of this proposed model and other existing NHPP SRGMs are investigated by using three real data-sets based on four criteria, respectively. The results show that the new model can be significantly effective in yielding better reliability estimation and prediction.

scholarly journals Experimental Verification of Real-Time Flow-Rate Estimations in a Tilting-Ladle-Type Automatic Pouring Machine

2021 ◽  
Vol 11 (15) ◽  
pp. 6701
Author(s):  
Yuta Sueki ◽  
Yoshiyuki Noda
Keyword(s):  
Real Time ◽  
Molten Metal ◽  
Flow Rate ◽  
Kalman Filters ◽  
Estimation Method ◽  
Estimation Methods ◽  
Liquid Volume ◽  
Model Parameters ◽  
Rate Estimation ◽  
Time Flow

This paper discusses a real-time flow-rate estimation method for a tilting-ladle-type automatic pouring machine used in the casting industry. In most pouring machines, molten metal is poured into a mold by tilting the ladle. Precise pouring is required to improve productivity and ensure a safe pouring process. To achieve precise pouring, it is important to control the flow rate of the liquid outflow from the ladle. However, due to the high temperature of molten metal, directly measuring the flow rate to devise flow-rate feedback control is difficult. To solve this problem, specific flow-rate estimation methods have been developed. In the previous study by present authors, a simplified flow-rate estimation method was proposed, in which Kalman filters were decentralized to motor systems and the pouring process for implementing into the industrial controller of an automatic pouring machine used a complicatedly shaped ladle. The effectiveness of this flow rate estimation was verified in the experiment with the ideal condition. In the present study, the appropriateness of the real-time flow-rate estimation by decentralization of Kalman filters is verified by comparing it with two other types of existing real-time flow-rate estimations, i.e., time derivatives of the weight of the outflow liquid measured by the load cell and the liquid volume in the ladle measured by a visible camera. We especially confirmed the estimation errors of the candidate real-time flow-rate estimations in the experiments with the uncertainty of the model parameters. These flow-rate estimation methods were applied to a laboratory-type automatic pouring machine to verify their performance.

A robust framework for shoulder implant X-ray image classification

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Minh Thanh Vo ◽  
Anh H. Vo ◽  
Tuong Le
Keyword(s):  
Image Classification ◽  
Performance Metrics ◽  
State Of The Art ◽  
Area Under The Curve ◽  
Predictive Performance ◽  
Extraction Process ◽  
Content Type ◽  
X Ray ◽  
Robust Model ◽  
Input Dataset

PurposeMedical images are increasingly popular; therefore, the analysis of these images based on deep learning helps diagnose diseases become more and more essential and necessary. Recently, the shoulder implant X-ray image classification (SIXIC) dataset that includes X-ray images of implanted shoulder prostheses produced by four manufacturers was released. The implant's model detection helps to select the correct equipment and procedures in the upcoming surgery.Design/methodology/approachThis study proposes a robust model named X-Net to improve the predictability for shoulder implants X-ray image classification in the SIXIC dataset. The X-Net model utilizes the Squeeze and Excitation (SE) block integrated into Residual Network (ResNet) module. The SE module aims to weigh each feature map extracted from ResNet, which aids in improving the performance. The feature extraction process of X-Net model is performed by both modules: ResNet and SE modules. The final feature is obtained by incorporating the extracted features from the above steps, which brings more important characteristics of X-ray images in the input dataset. Next, X-Net uses this fine-grained feature to classify the input images into four classes (Cofield, Depuy, Zimmer and Tornier) in the SIXIC dataset.FindingsExperiments are conducted to show the proposed approach's effectiveness compared with other state-of-the-art methods for SIXIC. The experimental results indicate that the approach outperforms the various experimental methods in terms of several performance metrics. In addition, the proposed approach provides the new state of the art results in all performance metrics, such as accuracy, precision, recall, F1-score and area under the curve (AUC), for the experimental dataset.Originality/valueThe proposed method with high predictive performance can be used to assist in the treatment of injured shoulder joints.

scholarly journals Progress in turbulence detection via GNSS occultation data

2012 ◽  
Vol 5 (4) ◽  
pp. 789-808 ◽  
Author(s):  
L. B. Cornman ◽  
R. K. Goodrich ◽  
P. Axelrad ◽  
E. Barlow
Keyword(s):  
Power Spectrum ◽  
Radio Occultation ◽  
Real Data ◽  
Index Of Refraction ◽  
Estimation Methods ◽  
Model Parameters ◽  
Phase Fluctuations ◽  
Global Statistics ◽  
Occultation Data ◽  
Parameter Estimators

Abstract. The increased availability of radio occultation (RO) data offers the ability to detect and study turbulence in the Earth's atmosphere. An analysis of how RO data can be used to determine the strength and location of turbulent regions is presented. This includes the derivation of a model for the power spectrum of the log-amplitude and phase fluctuations of the permittivity (or index of refraction) field. The bulk of the paper is then concerned with the estimation of the model parameters. Parameter estimators are introduced and some of their statistical properties are studied. These estimators are then applied to simulated log-amplitude RO signals. This includes the analysis of global statistics derived from a large number of realizations, as well as case studies that illustrate various specific aspects of the problem. Improvements to the basic estimation methods are discussed, and their beneficial properties are illustrated. The estimation techniques are then applied to real occultation data. Only two cases are presented, but they illustrate some of the salient features inherent in real data.

scholarly journals Mind the gap: preventing circularity in missense variant prediction

2020 ◽  
Author(s):  
Stephan Heijl ◽  
Bas Vroling ◽  
Tom van den Bergh ◽  
Henk-Jan Joosten
Keyword(s):  
Real World ◽  
Performance Metrics ◽  
Model Performance ◽  
Predictive Performance ◽  
Missense Variant ◽  
Training Methods ◽  
The Real ◽  
Evaluation Scores ◽  
Evaluation Strategies ◽  
Generic Strategy

AbstractDespite advances in the field of missense variant effect prediction, the real clinical utility of current computational approaches remains rather limited. There is a large difference in performance metrics reported by developers and those observed in the real world. Most currently available predictors suffer from one or more types of circularity in their training and evaluation strategies that lead to overestimation of predictive performance. We present a generic strategy that is independent of dataset properties and algorithms used, to deal with circularity in the training phase. This results in more robust predictors and evaluation scores that accurately reflect the real-world performance of predictive models. Additionally, we show that commonly used training methods can have an adverse impact on model performance and lead to gross overestimation of true predictive performance.

Sign in / Sign up

Export Citation Format

Share Document