scholarly journals Improved de novo Genome Assembly: Linked-Read Sequencing Combined with Optical Mapping Produce a High Quality Mammalian Genome at Relatively Low Cost

2017 ◽  
Author(s):  
DW Mohr ◽  
A Naguib ◽  
NI Weisenfeld ◽  
V Kumar ◽  
P Shah ◽  
...  
Keyword(s):  
Genome Assembly ◽  
De Novo ◽  
Low Cost ◽  
Cost Effective ◽  
Conserved Synteny ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Optical Maps ◽  
Commercial Applications ◽  
Hybrid Scaffolds

AbstractCurrent short-read methods have come to dominate genome sequencing because they are cost-effective, rapid, and accurate. However, short reads are most applicable when data can be aligned to a known reference. Two new methods for de novo assembly are linked-reads and restriction-site labeled optical maps. We combined commercial applications of these technologies for genome assembly of an endangered mammal, the Hawaiian Monk seal.We show that the linked-reads produced with 10X Genomics Chromium chemistry and assembled with Supernova v1.1 software produced scaffolds with an N50 of 22.23 Mbp with the longest individual scaffold of 84.06 Mbp. When combined with Bionano Genomics optical maps using Bionano RefAligner, the scaffold N50 increased to 29.65 Mbp for a total of 170 hybrid scaffolds, the longest of which was 84.78 Mbp. These results were 161X and 215X, respectively, improved over DISCOVAR de novo assemblies. The quality of the scaffolds was assessed using conserved synteny analysis of both the DNA sequence and predicted seal proteins relative to the genomes of humans and other species. We found large blocks of conserved synteny suggesting that the hybrid scaffolds were high quality. An inversion in one scaffold complementary to human chromosome 6 was found and confirmed by optical maps.The complementarity of linked-reads and optical maps is likely to make the production of high quality genomes more routine and economical and, by doing so, significantly improve our understanding of comparative genome biology.

scholarly journals Efficient long single molecule sequencing for cost effective and accurate sequencing, haplotyping, and de novo assembly

2018 ◽  
Author(s):  
Ou Wang ◽  
Robert Chin ◽  
Xiaofang Cheng ◽  
Michelle Ka Wu ◽  
Qing Mao ◽  
...  
Keyword(s):  
Single Molecule ◽  
Genome Assembly ◽  
De Novo ◽  
Low Cost ◽  
Variant Calling ◽  
Cost Effective ◽  
High Quality ◽  
Single Molecule Sequencing ◽  
Single Tube ◽  
Complex Structural

Obtaining accurate sequences from long DNA molecules is very important for genome assembly and other applications. Here we describe single tube long fragment read (stLFR), a technology that enables this a low cost. It is based on adding the same barcode sequence to sub-fragments of the original long DNA molecule (DNA co-barcoding). To achieve this efficiently, stLFR uses the surface of microbeads to create millions of miniaturized barcoding reactions in a single tube. Using a combinatorial process up to 3.6 billion unique barcode sequences were generated on beads, enabling practically non-redundant co-barcoding with 50 million barcodes per sample. Using stLFR, we demonstrate efficient unique co-barcoding of over 8 million 20-300 kb genomic DNA fragments. Analysis of the genome of the human genome NA12878 with stLFR demonstrated high quality variant calling and phasing into contigs up to N50 34 Mb. We also demonstrate detection of complex structural variants and complete diploid de novo assembly of NA12878. These analyses were all performed using single stLFR libraries and their construction did not significantly add to the time or cost of whole genome sequencing (WGS) library preparation. stLFR represents an easily automatable solution that enables high quality sequencing, phasing, SV detection, scaffolding, cost-effective diploid de novo genome assembly, and other long DNA sequencing applications.

scholarly journals A high-quality genome assembly from a single, field-collected spotted lanternfly (Lycorma delicatula) using the PacBio Sequel II system

GigaScience ◽  
2019 ◽  
Vol 8 (10) ◽  
Author(s):  
Sarah B Kingan ◽  
Julie Urban ◽  
Christine C Lambert ◽  
Primo Baybayan ◽  
Anna K Childers ◽  
...  
Keyword(s):  
Invasive Species ◽  
Genome Assembly ◽  
De Novo ◽  
Fragment Size ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Lycorma Delicatula ◽  
Long Read ◽  
Genome Assemblies ◽  
High Quality Genome

ABSTRACT Background A high-quality reference genome is an essential tool for applied and basic research on arthropods. Long-read sequencing technologies may be used to generate more complete and contiguous genome assemblies than alternate technologies; however, long-read methods have historically had greater input DNA requirements and higher costs than next-generation sequencing, which are barriers to their use on many samples. Here, we present a 2.3 Gb de novo genome assembly of a field-collected adult female spotted lanternfly (Lycorma delicatula) using a single Pacific Biosciences SMRT Cell. The spotted lanternfly is an invasive species recently discovered in the northeastern United States that threatens to damage economically important crop plants in the region. Results The DNA from 1 individual was used to make 1 standard, size-selected library with an average DNA fragment size of ∼20 kb. The library was run on 1 Sequel II SMRT Cell 8M, generating a total of 132 Gb of long-read sequences, of which 82 Gb were from unique library molecules, representing ∼36× coverage of the genome. The assembly had high contiguity (contig N50 length = 1.5 Mb), completeness, and sequence level accuracy as estimated by conserved gene set analysis (96.8% of conserved genes both complete and without frame shift errors). Furthermore, it was possible to segregate more than half of the diploid genome into the 2 separate haplotypes. The assembly also recovered 2 microbial symbiont genomes known to be associated with L. delicatula, each microbial genome being assembled into a single contig. Conclusions We demonstrate that field-collected arthropods can be used for the rapid generation of high-quality genome assemblies, an attractive approach for projects on emerging invasive species, disease vectors, or conservation efforts of endangered species.

scholarly journals A high-quality de novo genome assembly from a single parasitoid wasp

2020 ◽  
Author(s):  
Xinhai Ye ◽  
Yi Yang ◽  
Zhaoyang Tian ◽  
Le Xu ◽  
Kaili Yu ◽  
...  
Keyword(s):  
Genome Assembly ◽  
De Novo ◽  
Parasitoid Wasp ◽  
Genome Comparison ◽  
Single Individual ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Low Input ◽  
A Genome ◽  
High Level

AbstractSequencing and assembling a genome with a single individual have several advantages, such as lower heterozygosity and easier sample preparation. However, the amount of genomic DNA of some small sized organisms might not meet the standard DNA input requirement for current sequencing pipelines. Although few studies sequenced a single small insect with about 100 ng DNA as input, it may still be challenging for many small organisms to obtain such amount of DNA from a single individual. Here, we use 20 ng DNA as input, and present a high-quality genome assembly for a single haploid male parasitoid wasp (Habrobracon hebetor) using Nanopore and Illumina. Because of the low input DNA, a whole genome amplification (WGA) method is used before sequencing. The assembled genome size is 131.6 Mb with a contig N50 of 1.63 Mb. A total of 99% Benchmarking Universal Single-Copy Orthologs are detected, suggesting the high level of completeness of the genome assembly. Genome comparison between H. hebetor and its relative Bracon brevicornis shows a high-level genome synteny, indicating the genome of H. hebetor is highly accurate and contiguous. Our study provides an example for de novo assembling a genome from ultra-low input DNA, and will be used for sequencing projects of small sized species and rare samples, haploid genomics as well as population genetics of small sized species.

scholarly journals A high-quality, long-read de novo genome assembly to aid conservation of Hawaii’s last remaining crow species

2018 ◽  
Author(s):  
Jolene T. Sutton ◽  
Martin Helmkampf ◽  
Cynthia C. Steiner ◽  
M. Renee Bellinger ◽  
Jonas Korlach ◽  
...  
Keyword(s):  
Genome Assembly ◽  
Captive Breeding ◽  
De Novo ◽  
Bird Species ◽  
Population Level ◽  
Model Systems ◽  
Population Declines ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Long Read

AbstractGenome-level data can provide researchers with unprecedented precision to examine the causes and genetic consequences of population declines, and to apply these results to conservation management. Here we present a high-quality, long-read, de novo genome assembly for one of the world’s most endangered bird species, the Alala. As the only remaining native crow species in Hawaii, the Alala survived solely in a captive breeding program from 2002 until 2016, at which point a long-term reintroduction program was initiated. The high-quality genome assembly was generated to lay the foundation for both comparative genomics studies, and the development of population-level genomic tools that will aid conservation and recovery efforts. We illustrate how the quality of this assembly places it amongst the very best avian genomes assembled to date, comparable to intensively studied model systems. We describe the genome architecture in terms of repetitive elements and runs of homozygosity, and we show that compared with more outbred species, the Alala genome is substantially more homozygous. We also provide annotations for a subset of immunity genes that are likely to be important for conservation applications, and we discuss how this genome is currently being used as a roadmap for downstream conservation applications.

scholarly journals Ultra-low input single tube linked-read library method enables short-read NGS systems to generate highly accurate and economical long-range sequencing information for de novo genome assembly and haplotype phasing

2019 ◽  
Author(s):  
Zhoutao Chen ◽  
Long Pham ◽  
Tsai-Chin Wu ◽  
Guoya Mo ◽  
Yu Xia ◽  
...  
Keyword(s):  
Long Range ◽  
De Novo ◽  
Low Cost ◽  
Cost Effective ◽  
De Novo Genome Assembly ◽  
Short Read ◽  
Single Tube ◽  
Haplotype Phasing ◽  
A Genome ◽  
Long Read

AbstractLong-range sequencing information is required for haplotype phasing, de novo assembly and structural variation detection. Current long-read sequencing technologies can provide valuable long-range information but at a high cost with low accuracy and high DNA input requirement. We have developed a single-tube Transposase Enzyme Linked Long-read Sequencing (TELL-Seq™) technology, which enables a low-cost, high-accuracy and high-throughput short-read next generation sequencer to routinely generate over 100 Kb long-range sequencing information with as little as 0.1 ng input material. In a PCR tube, millions of clonally barcoded beads are used to uniquely barcode long DNA molecules in an open bulk reaction without dilution and compartmentation. The barcode linked reads are used to successfully assemble genomes ranging from microbes to human. These linked-reads also generate mega-base-long phased blocks and provide a cost-effective tool for detecting structural variants in a genome, which are important to identify compound heterozygosity in recessive Mendelian diseases and discover genetic drivers and diagnostic biomarkers in cancers.

scholarly journals High-Quality de novo Genome Assembly of Huajingxian 74, a Receptor Parent of Single Segment Substitution Lines

Rice Science ◽  
2021 ◽  
Vol 28 (2) ◽  
pp. 109-113
Author(s):  
Li Fangping ◽  
Gao Yanhao ◽  
Wu Bingqi ◽  
Cai Qingpei ◽  
Zhan Pengling ◽  
...  
Keyword(s):  
Genome Assembly ◽  
De Novo ◽  
Substitution Lines ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Single Segment ◽  
Single Segment Substitution Lines ◽  
Segment Substitution

scholarly journals LongStitch: High-quality genome assembly correction and scaffolding using long reads

2021 ◽  
Author(s):  
Lauren Coombe ◽  
Janet X Li ◽  
Theodora Lo ◽  
Johnathan Wong ◽  
Vladimir Nikolic ◽  
...  
Keyword(s):  
Genome Assembly ◽  
De Novo ◽  
Draft Genome ◽  
Model Organisms ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Long Reads ◽  
Long Read ◽  
Genomic Regions ◽  
Genome Assemblies

Background Generating high-quality de novo genome assemblies is foundational to the genomics study of model and non-model organisms. In recent years, long-read sequencing has greatly benefited genome assembly and scaffolding, a process by which assembled sequences are ordered and oriented through the use of long-range information. Long reads are better able to span repetitive genomic regions compared to short reads, and thus have tremendous utility for resolving problematic regions and helping generate more complete draft assemblies. Here, we present LongStitch, a scalable pipeline that corrects and scaffolds draft genome assemblies exclusively using long reads. Results LongStitch incorporates multiple tools developed by our group and runs in up to three stages, which includes initial assembly correction (Tigmint-long), followed by two incremental scaffolding stages (ntLink and ARKS-long). Tigmint-long and ARKS-long are misassembly correction and scaffolding utilities, respectively, previously developed for linked reads, that we adapted for long reads. Here, we describe the LongStitch pipeline and introduce our new long-read scaffolder, ntLink, which utilizes lightweight minimizer mappings to join contigs. LongStitch was tested on short and long-read assemblies of three different human individuals using corresponding nanopore long-read data, and improves the contiguity of each assembly from 2.0-fold up to 304.6-fold (as measured by NGA50 length). Furthermore, LongStitch generates more contiguous and correct assemblies compared to state-of-the-art long-read scaffolder LRScaf in most tests, and consistently runs in under five hours using less than 23GB of RAM. Conclusions Due to its effectiveness and efficiency in improving draft assemblies using long reads, we expect LongStitch to benefit a wide variety of de novo genome assembly projects. The LongStitch pipeline is freely available at https://github.com/bcgsc/longstitch.

scholarly journals A High-Quality De Novo Genome Assembly from a Single Mosquito using PacBio Sequencing

2018 ◽  
Author(s):  
Sarah B. Kingan ◽  
Haynes Heaton ◽  
Juliana Cudini ◽  
Christine C. Lambert ◽  
Primo Baybayan ◽  
...  
Keyword(s):  
Single Molecule ◽  
Genome Assembly ◽  
Population Genomics ◽  
De Novo ◽  
Anopheles Coluzzii ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Core Technology ◽  
Conserved Genes ◽  
Diploid Individual

AbstractA high-quality reference genome is a fundamental resource for functional genetics, comparative genomics, and population genomics, and is increasingly important for conservation biology. PacBio Single Molecule, Real-Time (SMRT) sequencing generates long reads with uniform coverage and high consensus accuracy, making it a powerful technology for de novo genome assembly. Improvements in throughput and concomitant reductions in cost have made PacBio an attractive core technology for many large genome initiatives, however, relatively high DNA input requirements (∼5 µg for standard library protocol) have placed PacBio out of reach for many projects on small organisms that have lower DNA content, or on projects with limited input DNA for other reasons. Here we present a high-quality de novo genome assembly from a single Anopheles coluzzii mosquito. A modified SMRTbell library construction protocol without DNA shearing and size selection was used to generate a SMRTbell library from just 100 ng of starting genomic DNA. The sample was run on the Sequel System with chemistry 3.0 and software v6.0, generating, on average, 25 Gb of sequence per SMRT Cell with 20 hour movies, followed by diploid de novo genome assembly with FALCON-Unzip. The resulting curated assembly had high contiguity (contig N50 3.5 Mb) and completeness (more than 98% of conserved genes are present and full-length). In addition, this single-insect assembly now places 667 (>90%) of formerly unplaced genes into their appropriate chromosomal contexts in the AgamP4 PEST reference. We were also able to resolve maternal and paternal haplotypes for over 1/3 of the genome. By sequencing and assembling material from a single diploid individual, only two haplotypes are present, simplifying the assembly process compared to samples from multiple pooled individuals. The method presented here can be applied to samples with starting DNA amounts as low as 100 ng per 1 Gb genome size. This new low-input approach puts PacBio-based assemblies in reach for small highly heterozygous organisms that comprise much of the diversity of life.

scholarly journals A High-Quality De novo Genome Assembly from a Single Mosquito Using PacBio Sequencing

Genes ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 62 ◽  
Author(s):  
Sarah Kingan ◽  
Haynes Heaton ◽  
Juliana Cudini ◽  
Christine Lambert ◽  
Primo Baybayan ◽  
...  
Keyword(s):  
Single Molecule ◽  
Genome Assembly ◽  
Population Genomics ◽  
De Novo ◽  
Anopheles Coluzzii ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Core Technology ◽  
Conserved Genes ◽  
Diploid Individual

A high-quality reference genome is a fundamental resource for functional genetics, comparative genomics, and population genomics, and is increasingly important for conservation biology. PacBio Single Molecule, Real-Time (SMRT) sequencing generates long reads with uniform coverage and high consensus accuracy, making it a powerful technology for de novo genome assembly. Improvements in throughput and concomitant reductions in cost have made PacBio an attractive core technology for many large genome initiatives, however, relatively high DNA input requirements (~5 µg for standard library protocol) have placed PacBio out of reach for many projects on small organisms that have lower DNA content, or on projects with limited input DNA for other reasons. Here we present a high-quality de novo genome assembly from a single Anopheles coluzzii mosquito. A modified SMRTbell library construction protocol without DNA shearing and size selection was used to generate a SMRTbell library from just 100 ng of starting genomic DNA. The sample was run on the Sequel System with chemistry 3.0 and software v6.0, generating, on average, 25 Gb of sequence per SMRT Cell with 20 h movies, followed by diploid de novo genome assembly with FALCON-Unzip. The resulting curated assembly had high contiguity (contig N50 3.5 Mb) and completeness (more than 98% of conserved genes were present and full-length). In addition, this single-insect assembly now places 667 (>90%) of formerly unplaced genes into their appropriate chromosomal contexts in the AgamP4 PEST reference. We were also able to resolve maternal and paternal haplotypes for over 1/3 of the genome. By sequencing and assembling material from a single diploid individual, only two haplotypes were present, simplifying the assembly process compared to samples from multiple pooled individuals. The method presented here can be applied to samples with starting DNA amounts as low as 100 ng per 1 Gb genome size. This new low-input approach puts PacBio-based assemblies in reach for small highly heterozygous organisms that comprise much of the diversity of life.

scholarly journals W2RAP: a pipeline for high quality, robust assemblies of large complex genomes from short read data

2017 ◽  
Author(s):  
Bernardo J. Clavijo ◽  
Gonzalo Garcia Accinelli ◽  
Jonathan Wright ◽  
Darren Heavens ◽  
Katie Barr ◽  
...  
Keyword(s):  
De Novo ◽  
Low Cost ◽  
Cost Effective ◽  
Data Generation ◽  
Sequencing Data ◽  
High Quality ◽  
Crop Species ◽  
Short Read ◽  
Link Type ◽  
Sequencing Technologies

AbstractProducing high-quality whole-genome shotgun de novo assemblies from plant and animal species with large and complex genomes using low-cost short read sequencing technologies remains a challenge. But when the right sequencing data, with appropriate quality control, is assembled using approaches focused on robustness of the process rather than maximization of a single metric such as the usual contiguity estimators, good quality assemblies with informative value for comparative analyses can be produced. Here we present a complete method described from data generation and qc all the way up to scaffold of complex genomes using Illumina short reads and its application to data from plants and human datasets. We show how to use the w2rap pipeline following a metric-guided approach to produce cost-effective assemblies. The assemblies are highly accurate, provide good coverage of the genome and show good short range contiguity. Our pipeline has already enabled the rapid, cost-effective generation of de novo genome assemblies from large, polyploid crop species with a focus on comparative genomics.Availabilityw2rap is available under MIT license, with some subcomponents under GPL-licenses. A ready-to-run docker with all software pre-requisites and example data is also available.http://github.com/bioinfologics/w2raphttp://github.com/bioinfologics/w2rap-contigger

Sign in / Sign up

Export Citation Format

Share Document