scholarly journals High throughput sequencing of multiple amplicons for barcoding and integrative taxonomy

2016 ◽  
Author(s):  
Perrine Cruaud ◽  
Jean-Yves Rasplus ◽  
Lillian Jennifer Rodriguez ◽  
Astrid Cruaud

ABSTRACTUntil now, the potential of NGS has been seldom realised for the construction of barcode reference libraries. Using a two-step PCR approach and MiSeq sequencing, we tested a cost-effective method and developed a custom workflow to simultaneously sequence multiple markers (COI, Cytb and EF, altogether 2kb) from hundreds of specimens. Interestingly, primers and PCR conditions used for Sanger sequencing did not require optimisation to construct MiSeq library. After completion of quality controls, 87% of the species and 76% of the specimens had valid sequences for the three markers. Nine specimens (3%) exhibited two divergent (up to 10%) sequence clusters. In 95% of the species, MiSeq and Sanger sequences obtained from the same samplings were similar. For the remaining 5%, species were paraphyletic or the sequences clustered into two divergent groups (>7%) on the final trees (Sanger + MiSeq). These problematic cases are difficult to explain but may represent coding NUMTS or heteroplasms. These results highlight the importance of performing quality control steps, working with expert taxonomists and using more than one marker for DNA-taxonomy or species diversity assessment. The power and simplicity of this method appears promising to build on existing experience, tools and resources while taking advantage of NGS.

2019 ◽  
Author(s):  
Mitchell Kluesner ◽  
Annette Arnold ◽  
Taga Lerner ◽  
Rafail Nikolaos Tasakis ◽  
Sandra Wüst ◽  
...  

ABSTRACTRNA editing is the base change that results from RNA deamination by two predominant classes of deaminases; the APOBEC family and the ADAR family. Respectively, deamination of nucleobases by these enzymes are responsible for endogenous editing of cytosine to uracil (C-to-U) and adenosine to inosine (A-to-I). RNA editing is known to play an essential role both in maintaining normal cellular function, as well as altered cellular physiology during oncogenesis and tumour progression. Analysis of RNA editing in these important processes, largely relies on RNA-seq technology for the detection and quantification of RNA editing sites. Despite the power of these technologies, multiple sources of error in detecting and measuring base editing still exist, therefore additional validation and quantification of editing through Sanger sequencing is still required for confirmation of editing. Depending on the number of RNA editing sites that are of interest, this validation step can be both expensive and time-consuming. To address this need we developed the tool MultiEditR which provides a simple, and cost-effective method of detecting and quantifying RNA editing form Sanger sequencing. We expect that MultiEditR will foster further discoveries in this rapidly expanding field.


2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Dániel Németh ◽  
Kristóf Árvai ◽  
Péter Horváth ◽  
János Pál Kósa ◽  
Bálint Tobiás ◽  
...  

Objective. Wilson’s disease is a disorder of copper metabolism which is fatal without treatment. The great number of disease-causingATP7Bgene mutations and the variable clinical presentation of WD may cause a real diagnostic challenge. The emergence of next-generation sequencing provides a time-saving, cost-effective method for full sequencing of the wholeATP7Bgene compared to the traditional Sanger sequencing. This is the first report on the clinical use of NGS to examineATP7Bgene.Materials and Methods. We used Ion Torrent Personal Genome Machine in four heterozygous patients for the identification of the other mutations and also in two patients with no known mutation. One patient with acute on chronic liver failure was a candidate for acute liver transplantation. The results were validated by Sanger sequencing.Results. In each case, the diagnosis of Wilson’s disease was confirmed by identifying the mutations in both alleles within 48 hours. One novel mutation (p.Ala1270Ile) was found beyond the eight other known ones. The rapid detection of the mutations made possible the prompt diagnosis of WD in a patient with acute liver failure.Conclusions. According to our results we found next-generation sequencing a very useful, reliable, time-saving, and cost-effective method for diagnosing Wilson’s disease in selected cases.


2003 ◽  
Vol 64 (10) ◽  
pp. S177
Author(s):  
Angelo N. Arnold ◽  
Tracy McRacken ◽  
Fran Peed ◽  
Vera Buxton ◽  
Kathy Griest ◽  
...  

2020 ◽  
Author(s):  
Efthymia Symeonidi ◽  
Julian Regalado ◽  
Rebecca Schwab ◽  
Detlef Weigel

AbstractBackgroundGenome editing with the CRISPR/Cas9 system allows the user to mutate a targeted region of the genome using an endonuclease (Cas9) and an artificial single-guide RNA (sgRNA). Both because of variable efficiency with which such mutations arise and because the repair process produces a spectrum of mutations, one needs to ascertain the genome sequence at the targeted locus for many individuals that have been subjected to CRISPR/Cas9 mutagenesis. This process can be laborious, expensive and inefficient with conventional methods such as the T7E1 assay or Sanger sequencing. An alternative comprises methods for amplicon sequencing, but most available protocols do not include a facile way for high throughput generation of the samples for sequencing.ResultsIn this study we provide a full pipeline based on amplicon sequencing, CRISPR-finder. We provide a complete protocol for the generation of amplicons up until the identification of the exact mutations in the targeted region. CRISPR-finder can be used to process thousands of individuals in a single sequencing run. For example, we were able to analyze in one sequencing reaction over 900 Arabidopsis thaliana individuals whose genomes had been targeted with the CRISPR/Cas9 system.ConclusionsIn order to validate the potential of CRISPR-finder, we targeted the ISOCHORISMATE SYNTHASE 1 gene in A. thaliana using the CRISPR/Cas9 system. We successfully identified a mutant line in which the production of salicylic acid was impaired compared to the wild type, as expected. These features establish CRISPR-finder as a high-throughput, cost-effective and -efficient genotyping method of individuals whose genomes have been targeted using the CRISPR/Cas9 system.


2019 ◽  
Author(s):  
Beth A. Rowan ◽  
Darren Heavens ◽  
Tatiana R. Feuerborn ◽  
Andrew J. Tock ◽  
Ian R. Henderson ◽  
...  

AbstractMany environmental, genetic, and epigenetic factors are known to affect the frequency and positioning of meiotic crossovers (COs). Suppression of COs by large, cytologically visible inversions and translocations has long been recognized, but relatively little is known about how smaller structural variants (SVs) affect COs. To examine fine-scale determinants of the CO landscape, including SVs, we used a rapid, cost-effective method for high-throughput sequencing to generate a precise map of over 17,000 COs between the Col-0 and Ler accessions of Arabidopsis thaliana. COs were generally suppressed in regions with SVs, but this effect did not depend on the size of the variant region, and was only marginally affected by the variant type. CO suppression did not extend far beyond the SV borders, and CO rates were slightly elevated in the flanking regions. Disease resistance gene clusters, which often exist as SVs, exhibited high CO rates at some loci, but there was a tendency toward depressed CO rates at loci where large structural differences exist between the two parents. Our high-density map also revealed in fine detail how CO positioning relates to genetic (DNA motifs) and epigenetic (chromatin structure) features of the genome. We conclude that suppression of COs occurs over a narrow region spanning large and small-scale SVs, representing influence on the CO landscape in addition to sequence and epigenetic variation along chromosomes.


Blood ◽  
2012 ◽  
Vol 120 (21) ◽  
pp. 2369-2369
Author(s):  
Gareth Gerrard ◽  
Mikel Valgañón ◽  
Hui En Foong ◽  
Dalia Kasperaviciute ◽  
Michael Müller ◽  
...  

Abstract Abstract 2369 Diamond-Blackfan anaemia (DBA) is a rare autosomal dominant disorder associated with inactivating mutations in ribosomal protein (RP) genes, causing defects in erythroid progenitor and precursor cell development. Many cases are due to de novo mutations and in family cases there is often clinical heterogeneity due to variable penetrance. Mutations in RPS19 account for 25% of all DBA cases and single nucleotide variations (SNV), indels and allele-loss deletions have been found in 11 other RP genes in a further ∼50% of patients. Around 25% of patients with DBA have no identifiable mutations. Given that (with the exception of 2 cases with GATA1 mutations) all mutations in DBA characterised so far affect RP genes, it is likely that mutations in one of the 80 RP genes will be eventually identified in a significant proportion of the patients. Current screening methods are primarily based on Sanger sequencing on a per-exon/per-gene basis, with the associated time, labour and cost restrictions. We therefore aimed to evaluate high-throughput sequencing technology, including a bespoke target enrichment platform, to screen all 80 known RP genes to facilitate rapid, cost-effective identification of DBA associated mutations. DNA was extracted from peripheral blood samples that had been referred to Imperial Molecular Pathology for DBA screening from 10 individuals, including 3 family pairs: affected mother and daughter; 2 affected siblings; and another sibling pair, one of whom was unaffected/low-penetrance (no defining clinical symptoms, except for high adenine deaminase). Only one patient had a known mutation (RPS19 c.280C>T) and was included as a control. Agilent SureSelect XP was used for the target enrichment, which employed a custom designed tiled-RNA bait hybridisation solution to capture the target genes, including non-masked intronic regions and 500bp of flanking sequence. The DNA was sheared using a Covaris e220, QC was performed via QIAxcel capillary electrophoresis and the hybridisation was carried out at 65°C for 48h. Individual libraries were quantified using qPCR against the supplied standard curve and pooled proportionally. The sequencing was performed on an Illumina MiSeq, using 150bp paired-end reads and multiplexed using the supplied ScriptSeq barcodes. The sequencing reads were aligned to the build 37 reference genome using BWA software, and the variant calls made using GATK. Annovar was used for functional annotations of the variants. Protein truncating mutations were found in RP genes in 7 of the 10 samples, including the positive control and 6 of the 8 clinically confirmed DBA patient samples., All mutations were in RP genes previous described as being involved in DBA, although 3 affected novel codons: RPL5 c.G244T (stop-gain SNV; novel; mother-daughter pair); RPL5 c.166_169delACAA (frameshift); RPS10 c.C337T (stop-gain SNV); RPL11 c.472–473delAA (frameshift; novel); RPS26 c.212–213insA (frameshift; novel). Validation was by Sanger sequencing and further confirmation testing will include unaffected family members. The remaining 2 DBA patients, a brother-sister pair, showed no definable mutations in the captured regions and neither did the unaffected/low-penetrance sibling of the RPS10 patient. In summary, a rapid and cost effective methodology for screening genetic lesions associated with the causation of DBA is warranted, especially given the magnitude of attaining global coverage by conventional techniques. Whole-gene enrichment followed by multiplexed runs on a bench-top class high-throughput sequencing platform is arguably the approach of choice; although as the cost of exome and even genome sequencing continues to fall, these may well become realistic options in the coming few years. This work is ongoing, with a second group of 10 samples already sequenced and undergoing analysis, and bioinformatic refinements, especially for the detection of larger deletions, may yet yield results for the two undetected samples. These preliminary results suggest that high throughput sequencing technology with a bespoke target enrichment platform for RP genes is a feasible, efficient and relatively rapid diagnostic tool for detection of causative mutations DBA. Disclosures: No relevant conflicts of interest to declare.


2014 ◽  
pp. n/a-n/a ◽  
Author(s):  
Joshua V. Peñalba ◽  
Lydia L. Smith ◽  
Maria A. Tonione ◽  
Chodon Sass ◽  
Sarah M. Hykin ◽  
...  

The choice of cost-effective method of anticorrosive protection of steel structures is an urgent and time consuming task, considering the significant number of protection ways, differing from each other in the complex of technological, physical, chemical and economic characteristics. To reduce the complexity of solving this problem, the author proposes a computational tool that can be considered as a subsystem of computer-aided design and used at the stage of variant and detailed design of steel structures. As a criterion of the effectiveness of the anti-corrosion protection method, the cost of the protective coating during the service life is accepted. The analysis of existing methods of steel protection against corrosion is performed, the possibility of their use for the protection of the most common steel structures is established, as well as the estimated period of effective operation of the coating. The developed computational tool makes it possible to choose the best method of protection of steel structures against corrosion, taking into account the operating conditions of the protected structure and the possibility of using a protective coating.


Sign in / Sign up

Export Citation Format

Share Document