scholarly journals 3D-Printed Autonomous Capillaric Circuits†

2016 ◽  
Author(s):  
A. O. Olanrewaju ◽  
A. Robillard ◽  
M. Dagher ◽  
D. Juncker
Keyword(s):  
3D Printing ◽  
Circuit Design ◽  
Microfluidic Devices ◽  
Electrical Circuit ◽  
3D Printer ◽  
Design Rules ◽  
Micro Scale ◽  
Potential Applications ◽  
3D Printed ◽  
Research And Education

AbstractCapillaric circuits (CCs) are advanced capillary microfluidic devices that move liquids in complex pre-programmed sequences without external pumps and valves-relying instead on microfluidic control elements powered by capillary forces. CCs were thought to require high-precision micro-scale features manufactured by photolithography in a cleanroom, which is slow and expensive. Here we present rapidly and inexpensively 3D-printed autonomous CCs. Molds for CCs were fabricated with a benchtop 3D-printer, Poly(dimethylsiloxane) replicas were made, and fluidic functionality was verified with aqueous solutions. We established design rules for 3D-printed CCs by a combination of modelling and experimentation. The functionality and reliability of 3D-printed trigger valves-an essential fluidic element that stops one liquid until flow is triggered by a second liquid-was tested for different geometries and different solutions. Trigger valves with geometries up to 80-fold larger than cleanroom-fabricated ones were found to function reliably. We designed 3D-printed retention burst valves that encode sequential liquid drainage and delivery using capillary pressure differences encoded by varying valve height and width. Using an electrical circuit analogue of the CC, we established circuit design rules for ensuring strictly sequential liquid delivery. We realized a 3D-printed CC with reservoir volumes 60 times larger than cleanroom-fabricated circuits and autonomously delivered eight liquids in a pre-determined sequence in < 7 min, exceeding the number of sequentially-encoded, self-regulated fluidic delivery events apreviously reported. Taken together, our results demonstrate that 3D-printing enables rapid prototyping of reliable CCs with improved functionality and potential applications in diagnostics, research and education.

scholarly journals Design and characterization of 3D printed, neomycin-eluting poly-L-lactide mats for wound-healing applications

2021 ◽  
Vol 32 (4) ◽  
Author(s):  
Mahima Singh ◽  
Sriramakamal Jonnalagadda
Keyword(s):  
Release Kinetics ◽  
Biological Properties ◽  
In Vitro Dissolution ◽  
3D Printer ◽  
Topical Antibiotic ◽  
Young’S Moduli ◽  
Base Polymer ◽  
Potential Applications ◽  
3D Printed

AbstractThis study evaluates the suitability of 3D printed biodegradable mats to load and deliver the topical antibiotic, neomycin, for up to 3 weeks in vitro. A 3D printer equipped with a hot melt extruder was used to print bandage-like wound coverings with porous sizes appropriate for cellular attachment and viability. The semicrystalline polyester, poly-l-lactic acid (PLLA) was used as the base polymer, coated (post-printing) with polyethylene glycols (PEGs) of MWs 400 Da, 6 kDa, or 20 kDa to enable manipulation of physicochemical and biological properties to suit intended applications. The mats were further loaded with a topical antibiotic (neomycin sulfate), and cumulative drug-release monitored for 3 weeks in vitro. Microscopic imaging as well as Scanning Electron Microscopy (SEM) studies showed pore dimensions of 100 × 400 µm. These pore dimensions were achieved without compromising mechanical strength; because of the “tough” individual fibers constituting the mat (Young’s Moduli of 50 ± 20 MPa and Elastic Elongation of 10 ± 5%). The in vitro dissolution study showed first-order release kinetics for neomycin during the first 20 h, followed by diffusion-controlled (Fickian) release for the remaining duration of the study. The release of neomycin suggested that the ability to load neomycin on to PLLA mats increases threefold, as the MW of the applied PEG coating is lowered from 20 kDa to 400 Da. Overall, this study demonstrates a successful approach to using a 3D printer to prepare porous degradable mats for antibiotic delivery with potential applications to dermal regeneration and tissue engineering.

scholarly journals Dual Sacrificial Molding: Fabricating 3D Microchannels with Overhang and Helical Features

Micromachines ◽  
2018 ◽  
Vol 9 (10) ◽  
pp. 523 ◽  
Author(s):  
Wei Goh ◽  
Michinao Hashimoto
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Microfluidic Devices ◽  
High Impact ◽  
3D Printer ◽  
Original Design ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Indispensable Tool ◽  
Single Material

Fused deposition modeling (FDM) has become an indispensable tool for 3D printing of molds used for sacrificial molding to fabricate microfluidic devices. The freedom of design of a mold is, however, restricted to the capabilities of the 3D printer and associated materials. Although FDM has been used to create a sacrificial mold made with polyvinyl alcohol (PVA) to produce 3D microchannels, microchannels with free-hanging geometries are still difficult to achieve. Herein, dual sacrificial molding was devised to fabricate microchannels with overhang or helical features in PDMS using two complementary materials. The method uses an FDM 3D printer equipped with two extruders and filaments made of high- impact polystyrene (HIPS) and PVA. HIPS was initially removed in limonene to reveal the PVA mold harboring the design of microchannels. The PVA mold was embedded in PDMS and subsequently removed in water to create microchannels with 3D geometries such as dual helices and multilayer pyramidal networks. The complementary pairing of the HIPS and PVA filaments during printing facilitated the support of suspended features of the PVA mold. The PVA mold was robust and retained the original design after the exposure to limonene. The resilience of the technique demonstrated here allows us to create microchannels with geometries not attainable with sacrificial molding with a mold printed with a single material.

A physical investigation of dimensional and mechanical characteristics of 3D printed nut and bolt for industrial applications

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ramesh Chand ◽  
Vishal S. Sharma ◽  
Rajeev Trehan ◽  
Munish Kumar Gupta
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
3D Printing ◽  
Surface Properties ◽  
3D Printer ◽  
Content Type ◽  
Safety Issues ◽  
Machine Failure ◽  
Sharp Edges ◽  
3D Printed

Purpose A nut bolt joint is a primary device that connects mechanical components. The vibrations cause bolted joints to self-loosen. Created by motors and engines, leading to machine failure, and there may be severe safety issues. All the safety issues and self-loosen are directly and indirectly the functions of the accuracy and precision of the fabricated nut and bolt. Recent advancements in three-dimensional (3D) printing technologies now allow for the production of intricate components. These may be used technologies such as 3D printed bolts to create fasteners. This paper aims to investigate dimensional precision, surface properties, mechanical properties and scanning electron microscope (SEM) of the component fabricated using a multi-jet 3D printer. Design/methodology/approach Multi-jet-based 3D printed nut-bolt is evaluated in this paper. More specifically, liquid polymer-based nut-bolt is fabricated in sections 1, 2 and 3 of the base plate. Five nuts and bolts are fabricated in these three sections. Findings Dimensional inquiry (bolt dimension, general dimensions’ density and surface roughness) and mechanical testing (shear strength of nut and bolt) were carried out throughout the study. According to the ISO 2768 requirements for the General Tolerances Grade, the nut and bolt’s dimensional examination (variation in bolt dimension, general dimensions) is within the tolerance grades. As a result, the multi-jet 3D printing (MJP)-based 3D printer described above may be used for commercial production. In terms of mechanical qualities, when the component placement moves from Sections 1 to 3, the density of the manufactured part decreases by 0.292% (percent) and the shear strength of the nut and bolt decreases by 30%. According to the SEM examination, the density of the River markings, sharp edges, holes and sharp edges increased from Sections 1 to 3, which supports the findings mentioned above. Originality/value Hence, this work enlightens the aspects causing time lag during the 3D printing in MJP. It causes variation in the dimensional deviation, surface properties and mechanical properties of the fabricated part, which needs to be explored.

Controlled Release of Bi-Layered Malvidin Tablets Using 3D Printing Techniques

2021 ◽  
pp. 70-78
Author(s):  
Tejinder Kaur ◽  
Suruchi Singh
Keyword(s):  
Controlled Release ◽  
3D Printing ◽  
Fruits And Vegetables ◽  
Physical And Mechanical Properties ◽  
3D Printer ◽  
Anti Cancer ◽  
Printing Cost ◽  
3D Printed ◽  
Cost Efficient ◽  
3D Printing Technique

Malvidin belongs to the class of anthocyanidin, a pigment compound present in fruits and vegetables like the colored berries, flowers, and vegetables which have pigments on it and it is available commercially as malvidin chloride. Malvidin is known to possess many medicinal characteristics like anti-microbial, anti-diabetic, anti-inflammatory, anti-obesity, and anti-cancer. In this research paper, a 3D printing technique is used which evolves a 3D printer based on desktop that extrudes tablets comprising the active drug which here is malvidin our main ingredient and the other excipients which are used as binders and disintegrants. Methods which are adapted here for the formulation of 3D printed tablet make the tablets appropriate for immediate and sustained release with its definite physical and mechanical properties like hardness, friability, and weight. Tablets that are extruded by the 3D printer are controlled release bi-layer tablets. Due to involvement of 3D printer, printing cost for the bi-layered tablets found very low that makes our method as cost efficient.

History of Additive Manufacturing

2017 ◽  
pp. 1-24 ◽  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Large Scale ◽  
Selective Laser Sintering ◽  
3D Printer ◽  
3D Objects ◽  
History Of ◽  
Pros And Cons ◽  
3D Printed ◽  
The Common

History of additive manufacturing started in the 1980s in Japan. Stereolithography was invented first in 1983. After that tens of other techniques were invented under the common name 3D printing. When stereolithography was invented rapid prototyping did not exists. Tree years later new technique was invented: selective laser sintering (SLS). First commercial SLS was in 1990. At the end of 20t century, first bio-printer was developed. Using bio materials, first kidney was 3D printed. Ten years later, first 3D Printer in the kit was launched to the market. Today we have large scale printers that printed large 3D objects such are cars. 3D printing will be used for printing everything everywhere. List of pros and cons questions rising every day.

scholarly journals 3D Printed Microfluidics

2020 ◽  
Vol 13 (1) ◽  
pp. 45-65 ◽  
Author(s):  
Anna V. Nielsen ◽  
Michael J. Beauchamp ◽  
Gregory P. Nordin ◽  
Adam T. Woolley
Keyword(s):  
3D Printing ◽  
Early Stage ◽  
Three Dimensional ◽  
Microfluidic Devices ◽  
Fabrication Method ◽  
Size Scale ◽  
Additional Work ◽  
Fluidic Devices ◽  
3D Printed ◽  
Microfabrication Techniques

Traditional microfabrication techniques suffer from several disadvantages, including the inability to create truly three-dimensional (3D) architectures, expensive and time-consuming processes when changing device designs, and difficulty in transitioning from prototyping fabrication to bulk manufacturing. 3D printing is an emerging technique that could overcome these disadvantages. While most 3D printed fluidic devices and features to date have been on the millifluidic size scale, some truly microfluidic devices have been shown. Currently, stereolithography is the most promising approach for routine creation of microfluidic structures, but several approaches under development also have potential. Microfluidic 3D printing is still in an early stage, similar to where polydimethylsiloxane was two decades ago. With additional work to advance printer hardware and software control, expand and improve resin and printing material selections, and realize additional applications for 3D printed devices, we foresee 3D printing becoming the dominant microfluidic fabrication method.

scholarly journals 3D-Printed Biopolymers for Tissue Engineering Application

2014 ◽  
Vol 2014 ◽  
pp. 1-13 ◽  
Author(s):  
Xiaoming Li ◽  
Rongrong Cui ◽  
Lianwen Sun ◽  
Katerina E. Aifantis ◽  
Yubo Fan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
3D Printing ◽  
Three Dimensional ◽  
Engineering Application ◽  
Tissue Engineering Application ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Potential Applications ◽  
3D Printed ◽  
Dimensional Object

3D printing technology has recently gained substantial interest for potential applications in tissue engineering due to the ability of making a three-dimensional object of virtually any shape from a digital model. 3D-printed biopolymers, which combine the 3D printing technology and biopolymers, have shown great potential in tissue engineering applications and are receiving significant attention, which has resulted in the development of numerous research programs regarding the material systems which are available for 3D printing. This review focuses on recent advances in the development of biopolymer materials, including natural biopolymer-based materials and synthetic biopolymer-based materials prepared using 3D printing technology, and some future challenges and applications of this technology are discussed.

scholarly journals Three-dimensional Printing Versus Conventional Machining in the Creation of a Meatal Urethral Dilator: a Cost and Mechanical Strength Analysis

2020 ◽  
Author(s):  
Michael Yue-Cheng Chen ◽  
Jacob Skewes ◽  
Ryan Daley ◽  
Maria Ann Woodruff ◽  
Nicholas John Rukin
Keyword(s):  
3D Printing ◽  
Three Dimensional ◽  
Patient Specific ◽  
Strength Analysis ◽  
Fused Deposition Modelling ◽  
3D Printer ◽  
Current Time ◽  
Fused Deposition ◽  
3D Printed ◽  
Conventional Machining

Abstract BackgroundThree-dimensional (3D) printing is a promising technology but the limitations are often poorly understood. We compare different 3D printingmethods with conventional machining techniques in manufacturing meatal urethral dilators which were recently removed from the Australian market. MethodsA prototype dilator was 3D printed vertically orientated on a low cost fused deposition modelling (FDM) 3D printer in polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). It was also 3D printed horizontally orientated in ABS on a high-end FDM 3D printer with soluble support material, as well as on a SLS 3D printer in medical nylon. The dilator was also machined in stainless steel using a lathe. All dilators were tested mechanically in a custom rig by hanging calibrated weights from the handle until the dilator snapped. ResultsThe horizontally printed ABS dilator experienced failure at a greater load than the vertically printed PLA and ABS dilators respectively (503g vs 283g vs 163g, p < 0.001). The SLS nylon dilator and machined steel dilator did not fail. The steel dilator is most expensive with a quantity of five at 98 USD each, but this decreases to 30 USD each for a quantity of 1000. In contrast, the cost for the SLS dilator is 33 USD each for five and 27 USD each for 1000. ConclusionsAt the current time 3D printing is not a replacement for conventional manufacturing. 3D printing is best used for patient-specific parts, prototyping or manufacturing complex parts that have additional functionality that cannot otherwise beachieved.

scholarly journals Design and characterization of a 3D-printed staggered herringbone mixer

BioTechniques ◽  
2021 ◽  
Author(s):  
Vedika J Shenoy ◽  
Chelsea ER Edwards ◽  
Matthew E Helgeson ◽  
Megan T Valentine
Keyword(s):  
3D Printing ◽  
High Throughput ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Device Design ◽  
Replica Molding ◽  
3D Printed ◽  
And Performance ◽  
To Receive

3D printing holds potential as a faster, cheaper alternative compared with traditional photolithography for the fabrication of microfluidic devices by replica molding. However, the influence of printing resolution and quality on device design and performance has yet to receive detailed study. Here, we investigate the use of 3D-printed molds to create staggered herringbone mixers (SHMs) with feature sizes ranging from ∼100 to 500 μm. We provide guidelines for printer calibration to ensure accurate printing at these length scales and quantify the impacts of print variability on SHM performance. We show that SHMs produced by 3D printing generate well-mixed output streams across devices with variable heights and defects, demonstrating that 3D printing is suitable and advantageous for low-cost, high-throughput SHM manufacturing.

scholarly journals Property Analysis of Photo-Polymerization-Type 3D-Printed Structures Based on Multi-Composite Materials

2021 ◽  
Vol 11 (18) ◽  
pp. 8545
Author(s):  
So-Ree Hwang ◽  
Min-Soo Park
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Composite Materials ◽  
3D Printing ◽  
Bending Test ◽  
3D Printer ◽  
Complex Structures ◽  
Photo Polymerization ◽  
Anisotropic Structures ◽  
3D Printed

Additive manufacturing, commonly called 3D printing, has been studied extensively because it can be used to fabricate complex structures; however, polymer-based 3D printing has limitations in terms of implementing certain functionalities, so it is limited in the production of conceptual prototypes. As such, polymer-based composites and multi-material 3D printing are being studied as alternatives. In this study, a DLP 3D printer capable of printing multiple composite materials was fabricated using a movable separator and structures with various properties were fabricated by selectively printing two composite materials. After the specimen was fabricated based on the ASTM, the basic mechanical properties of the structure were compared through a 3-point bending test and a ball rebound test. Through this, it was shown that structures with various mechanical properties can be fabricated using the proposed movable-separator-based DLP process. In addition, it was shown that this process can be used to fabricate anisotropic structures, whose properties vary depending on the direction of the force applied to the structure. By fabricating multi-joint grippers with varying levels of flexibility, it was shown that the proposed process can be applied in the fabrication of soft robots as well.

Sign in / Sign up

Export Citation Format

Share Document