scholarly journals Sequencing ultra-long DNA molecules with the Oxford Nanopore MinION

2015 ◽  
Author(s):  
John M Urban ◽  
Jacob Bliss ◽  
Charles E Lawrence ◽  
Susan A Gerbi
Keyword(s):  
Cost Effective ◽  
Nanopore Sequencing ◽  
Dna Fragments ◽  
Dna Molecules ◽  
Oxford Nanopore ◽  
Oxford Nanopore Technologies

Oxford Nanopore Technologies' nanopore sequencing device, the MinION, holds the promise of sequencing ultra-long DNA fragments >100kb. An obstacle to realizing this promise is delivering ultra-long DNA molecules to the nanopores. We present our progress in developing cost-effective ways to overcome this obstacle and our resulting MinION data, including multiple reads >100kb.

scholarly journals Genome and transcriptome of a pathogenic yeast, Candida nivariensis

2021 ◽  
Author(s):  
Yunfan Fan ◽  
Andrew N Gale ◽  
Anna Bailey ◽  
Kali Barnes ◽  
Kiersten Colotti ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Candida Glabrata ◽  
Nanopore Sequencing ◽  
Cdna Sequencing ◽  
Pathogenic Yeast ◽  
Mitochondrial Sequence ◽  
Dna And Rna ◽  
Oxford Nanopore ◽  
Candida Nivariensis ◽  
Oxford Nanopore Technologies

Abstract We present a highly contiguous genome and transcriptome of the pathogenic yeast, Candida nivariensis. We sequenced both the DNA and RNA of this species using both the Oxford Nanopore Technologies (ONT) and Illumina platforms. We assembled the genome into an 11.8 Mb draft composed of 16 contigs with an N50 of 886 Kb, including a circular mitochondrial sequence of 28 Kb. Using direct RNA nanopore sequencing and Illumina cDNA sequencing, we constructed an annotation of our new assembly, supplemented by lifting over genes from Saccharomyces cerevisiae and Candida glabrata.

scholarly journals High resolution copy number inference in cancer using short-molecule nanopore sequencing

2020 ◽  
Author(s):  
Timour Baslan ◽  
Sam Kovaka ◽  
Fritz J. Sedlazeck ◽  
Yanming Zhang ◽  
Robert Wappel ◽  
...  
Keyword(s):  
Copy Number ◽  
Cost Effective ◽  
Chromosome Analysis ◽  
Ease Of Use ◽  
Precision Oncology ◽  
Nanopore Sequencing ◽  
Dna Molecules ◽  
Sequencing Data ◽  
Short Read ◽  
Short Read Sequencing

ABSTRACTGenome copy number is an important source of genetic variation in health and disease. In cancer, clinically actionable Copy Number Alterations (CNAs) can be inferred from short-read sequencing data, enabling genomics-based precision oncology. Emerging Nanopore sequencing technologies offer the potential for broader clinical utility, for example in smaller hospitals, due to lower instrument cost, higher portability, and ease of use. Nonetheless, Nanopore sequencing devices are limited in terms of the number of retrievable sequencing reads/molecules compared to short-read sequencing platforms. This represents a challenge for applications that require high read counts such as CNA inference. To address this limitation, we targeted the sequencing of short-length DNA molecules loaded at optimized concentration in an effort to increase sequence read/molecule yield from a single nanopore run. We show that sequencing short DNA molecules reproducibly returns high read counts and allows high quality CNA inference. We demonstrate the clinical relevance of this approach by accurately inferring CNAs in acute myeloid leukemia samples. The data shows that, compared to traditional approaches such as chromosome analysis/cytogenetics, short molecule nanopore sequencing returns more sensitive, accurate copy number information in a cost effective and expeditious manner, including for multiplex samples. Our results provide a framework for the sequencing of relatively short DNA molecules on nanopore devices with applications in research and medicine, that include but are not limited to, CNAs.

scholarly journals Nanopore Sequencing of a Forensic STR Multiplex Reveals Loci Suitable for Single-Contributor STR Profiling

Genes ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 381 ◽  
Author(s):  
Olivier Tytgat ◽  
Yannick Gansemans ◽  
Jana Weymaere ◽  
Kaat Rubben ◽  
Dieter Deforce ◽  
...  
Keyword(s):  
Tandem Repeats ◽  
Massively Parallel Sequencing ◽  
Flow Cell ◽  
Nanopore Sequencing ◽  
Flow Cells ◽  
Pattern Complexity ◽  
Str Loci ◽  
Oxford Nanopore ◽  
Oxford Nanopore Technologies ◽  
Short Tandem

Nanopore sequencing for forensic short tandem repeats (STR) genotyping comes with the advantages associated with massively parallel sequencing (MPS) without the need for a high up-front device cost, but genotyping is inaccurate, partially due to the occurrence of homopolymers in STR loci. The goal of this study was to apply the latest progress in nanopore sequencing by Oxford Nanopore Technologies in the field of STR genotyping. The experiments were performed using the state of the art R9.4 flow cell and the most recent R10 flow cell, which was specifically designed to improve consensus accuracy of homopolymers. Two single-contributor samples and one mixture sample were genotyped using Illumina sequencing, Nanopore R9.4 sequencing, and Nanopore R10 sequencing. The accuracy of genotyping was comparable for both types of flow cells, although the R10 flow cell provided improved data quality for loci characterized by the presence of homopolymers. We identify locus-dependent characteristics hindering accurate STR genotyping, providing insights for the design of a panel of STR loci suited for nanopore sequencing. Repeat number, the number of different reference alleles for the locus, repeat pattern complexity, flanking region complexity, and the presence of homopolymers are identified as unfavorable locus characteristics. For single-contributor samples and for a limited set of the commonly used STR loci, nanopore sequencing could be applied. However, the technology is not mature enough yet for implementation in routine forensic workflows.

scholarly journals Detection of single nucleotide and copy number variants in the Fabry disease-associated GLA gene using nanopore sequencing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Albina Nowak ◽  
Omer Murik ◽  
Tzvia Mann ◽  
David A. Zeevi ◽  
Gheona Altarescu
Keyword(s):  
Fabry Disease ◽  
Copy Number ◽  
New Technology ◽  
Copy Number Variants ◽  
Cost Effective ◽  
Nanopore Sequencing ◽  
Oxford Nanopore ◽  
Long Read ◽  
Sanger Sequence ◽  
Gla Gene

AbstractMore than 900 variants have been described in the GLA gene. Some intronic variants and copy number variants in GLA can cause Fabry disease but will not be detected by classical Sanger sequence. We aimed to design and validate a method for sequencing the GLA gene using long-read Oxford Nanopore sequencing technology. Twelve Fabry patients were blindly analyzed, both by conventional Sanger sequence and by long-read sequencing of a 13 kb PCR amplicon. We used minimap2 to align the long-read data and Nanopolish and Sniffles to call variants. All the variants detected by Sanger (including a deep intronic variant) were also detected by long-read sequencing. One patient had a deletion that was not detected by Sanger sequencing but was detected by the new technology. Our long-read sequencing-based method was able to detect missense variants and an exonic deletion, with the added advantage of intronic analysis. It can be used as an efficient and cost-effective tool for screening and diagnosing Fabry disease.

scholarly journals Methplotlib: analysis of modified nucleotides from nanopore sequencing

2019 ◽  
Author(s):  
Wouter De Coster ◽  
Mojca Strazisar
Keyword(s):  
Gene Expression Regulation ◽  
Command Line ◽  
Nanopore Sequencing ◽  
Modified Nucleotides ◽  
Oxford Nanopore ◽  
Command Line Tool ◽  
Within Subjects ◽  
Allele Specific ◽  
Sequencing Platforms ◽  
Oxford Nanopore Technologies

AbstractSummaryModified nucleotides play a crucial role in gene expression regulation. Here we describe methplotlib, a tool developed for the visualization of modified nucleotides detected from Oxford Nanopore Technologies sequencing platforms, together with additional scripts for statistical analysis of allele specific modification within subjects and differential modification frequency across subjects.Availability and implementationThe methplotlib command-line tool is written in Python3, is compatible with Linux, Mac OS and the MS Windows 10 Subsystem for Linux and released under the MIT license. The source code can be found at https://github.com/wdecoster/methplotlib and can be installed from PyPI and bioconda. Our repository includes test data and the tool is continuously tested at [email protected]

scholarly journals Detection of Clinically Relevant Molecular Alterations in Chronic Lymphocytic Leukemia (CLL) By Nanopore Sequencing

Blood ◽  
2018 ◽  
Vol 132 (Supplement 1) ◽  
pp. 1847-1847 ◽  
Author(s):  
Adam Burns ◽  
David Robert Bruce ◽  
Pauline Robbe ◽  
Adele Timbs ◽  
Basile Stamatopoulos ◽  
...  
Keyword(s):  
Error Correction ◽  
Low Cost ◽  
Nanopore Sequencing ◽  
Sequencing Data ◽  
Mutation Status ◽  
Short Read ◽  
Short Read Sequencing ◽  
Oxford Nanopore ◽  
Low Coverage ◽  
Oxford Nanopore Technologies

Abstract Introduction Chronic Lymphocytic Leukaemia (CLL) is the most prevalent leukaemia in the Western world and characterised by clinical heterogeneity. IgHV mutation status, mutations in the TP53 gene and deletions of the p-arm of chromosome 17 are currently used to predict an individual patient's response to therapy and give an indication as to their long-term prognosis. Current clinical guidelines recommend screening patients prior to initial, and any subsequent, treatment. Routine clinical laboratory practices for CLL involve three separate assays, each of which are time-consuming and require significant investment in equipment. Nanopore sequencing offers a rapid, low-cost alternative, generating a full prognostic dataset on a single platform. In addition, Nanopore sequencing also promises low failure rates on degraded material such as FFPE and excellent detection of structural variants due to long read length of sequencing. Importantly, Nanopore technology does not require expensive equipment, is low-maintenance and ideal for patient-near testing, making it an attractive DNA sequencing device for low-to-middle-income countries. Methods Eleven untreated CLL samples were selected for the analysis, harbouring both mutated (n=5) and unmutated (n=6) IgHV genes, seven TP53 mutations (five missense, one stop gain and one frameshift) and two del(17p) events. Primers were designed to amplify all exons of TP53, along with the IgHV locus, and each primer included universal tails for individual sample barcoding. The resulting PCR amplicons were prepared for sequencing using a ligation sequencing kit (SQK-LSK108, Oxford Nanopore Technologies, Oxford, UK). All IgHV libraries were pooled and sequenced on one R9.4 flowcell, with the TP53 libraries pooled and sequenced on a second R9.4 flowcell. Whole genome libraries were prepared from 400ng genomic DNA for each sample using a rapid sequencing kit (SQK-RAD004, Oxford Nanopore Technologies, Oxford, UK), and each sample sequenced on individual flowcells on a MinION mk1b instrument (Oxford Nanopore Technologies, Oxford, UK). We developed a bespoke bioinformatics pipeline to detect copy-number changes, TP53 mutations and IgHV mutation status from the Nanopore sequencing data. Results were compared to short-read sequencing data obtained earlier by targeted deep sequencing (MiSeq, Illumina Inc, San Diego, CA, USA) and whole genome sequencing (HiSeq 2500, Illumina Inc, San Diego CA, USA). Results Following basecalling and adaptor trimming, the raw data were submitted to the IMGT database. In the absence of error correction, it was possible to identify the correct VH family for each sample; however the germline homology was not sufficient to differentiate between IgHVmut and IgHVunmut CLL cases. Following bio-informatic error correction and consensus building, the percentage to germline homology was the same as that obtained from short-read sequencing and nanopore sequencing also called the same productive rearrangements in all cases. A total of 77 TP53 variants were identified, including 68 in non-coding regions, and three synonymous SNVs. The remaining 6 were predicted to be functional variants (eight missense and two stop-gains) and had all been identified in early MiSeq targeted sequencing. However, the frameshift mutation was not called by the analysis pipeline, although it is present in the aligned reads. Using the low-coverage WGS data, we were able to identify del(17p) events, of 19Mb and 20Mb length, in both patients with high confidence. Conclusions Here we demonstrate that characterization of the IgHV locus in CLL cases is possible using the MinION platform, provided sufficient downstream analysis, including error correction, is applied. Furthermore, somatic SNVs in TP53 can be identified, although similar to second generation sequencing, variant calling of small insertions and deletions is more problematic. Identification of del(17p) is possible from low-coverage WGS on the MinION and is inexpensive. Our data demonstrates that Nanopore sequencing can be a viable, patient-near, low-cost alternative to established screening methods, with the potential of diagnostic implementation in resource-poor regions of the world. Disclosures Schuh: Giles, Roche, Janssen, AbbVie: Honoraria.

scholarly journals Detection of Single Nucleotide and Copy Number Variants in the Fabry Disease-associated GLA Gene Using Nanopore Sequencing

2021 ◽  
Author(s):  
Albina Nowak ◽  
Omer Murik ◽  
Tzvia Mann ◽  
David A. Zeevi ◽  
Gheona Altarescu
Keyword(s):  
Fabry Disease ◽  
Copy Number ◽  
New Technology ◽  
Copy Number Variants ◽  
Cost Effective ◽  
Nanopore Sequencing ◽  
Oxford Nanopore ◽  
Long Read ◽  
Sanger Sequence ◽  
Gla Gene

Abstract Introduction: More than one thousand variants have been described in the GLA gene. Some intronic variants and copy number variants in GLA can cause Fabry disease but will not be detected by classical Sanger sequence.Aims: We aimed to design and validate a method for sequencing the GLA gene using long read Oxford Nanopore sequencing technology.Methods: Twelve Fabry patients were blindly analyzed, both by conventional Sanger sequence and by long read sequencing of a 13kb PCR amplicon. We used minimap2 to align the long read data and Nanopolish and Sniffles to call variants.Results: All the variants detected by Sanger (including a deep intronic variant) were also detected by long read sequencing. One patient had a deletion that was not detected by Sanger sequencing but was detected by the new technology.Conclusions: Our long read sequencing-based method was able to detect missense variants and an exonic deletion, with the added advantage of intronic analysis. It can be used as an efficient and cost-effective tool for screening and diagnosing Fabry disease.

scholarly journals Availability of Nanopore sequences in the genome taxonomy for Vibrionaceae systematics: Rumoiensis clade species as a test case

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e5018 ◽  
Author(s):  
Mami Tanaka ◽  
Sayaka Mino ◽  
Yoshitoshi Ogura ◽  
Tetsuya Hayashi ◽  
Tomoo Sawabe
Keyword(s):  
Dna Hybridization ◽  
Cost Effective ◽  
Whole Genome Sequence ◽  
Test Case ◽  
Bacterial Taxonomy ◽  
Bacterial Genomes ◽  
Sequence Comparisons ◽  
Oxford Nanopore ◽  
Hybrid Assemblies ◽  
Oxford Nanopore Technologies

Whole genome sequence comparisons have become essential for establishing a robust scheme in bacterial taxonomy. To generalize this genome-based taxonomy, fast, reliable, and cost-effective genome sequencing methodologies are required. MinION, the palm-sized sequencer from Oxford Nanopore Technologies, enables rapid sequencing of bacterial genomes using minimal laboratory resources. Here we tested the ability of Nanopore sequences for the genome-based taxonomy of Vibrionaceae and compared Nanopore-only assemblies to complete genomes of five Rumoiensis clade species: Vibrio aphrogenes, V. algivorus, V. casei, V. litoralis, and V. rumoiensis. Comparison of overall genome relatedness indices (OGRI) and multilocus sequence analysis (MLSA) based on Nanopore-only assembly and Illumina or hybrid assemblies revealed that errors in Nanopore-only assembly do not influence average nucleotide identity (ANI), in silico DNA-DNA hybridization (DDH), G+C content, or MLSA tree topology in Vibrionaceae. Our results show that the genome sequences from Nanopore-based approach can be used for rapid species identification based on the OGRI and MLSA.

scholarly journals Comparison of Illumina versus Nanopore 16S rRNA Gene Sequencing of the Human Nasal Microbiota

Genes ◽  
2020 ◽  
Vol 11 (9) ◽  
pp. 1105 ◽  
Author(s):  
Astrid P. Heikema ◽  
Deborah Horst-Kreft ◽  
Stefan A. Boers ◽  
Rick Jansen ◽  
Saskia D. Hiltemann ◽  
...  
Keyword(s):  
16S Rrna ◽  
16S Rrna Gene ◽  
Gene Sequencing ◽  
16S Rrna Gene Sequencing ◽  
Rrna Gene ◽  
Nanopore Sequencing ◽  
Oxford Nanopore ◽  
Rrna Gene Sequencing ◽  
Oxford Nanopore Technologies ◽  
Nasal Microbiota

Illumina and nanopore sequencing technologies are powerful tools that can be used to determine the bacterial composition of complex microbial communities. In this study, we compared nasal microbiota results at genus level using both Illumina and nanopore 16S rRNA gene sequencing. We also monitored the progression of nanopore sequencing in the accurate identification of species, using pure, single species cultures, and evaluated the performance of the nanopore EPI2ME 16S data analysis pipeline. Fifty-nine nasal swabs were sequenced using Illumina MiSeq and Oxford Nanopore 16S rRNA gene sequencing technologies. In addition, five pure cultures of relevant bacterial species were sequenced with the nanopore sequencing technology. The Illumina MiSeq sequence data were processed using bioinformatics modules present in the Mothur software package. Albacore and Guppy base calling, a workflow in nanopore EPI2ME (Oxford Nanopore Technologies—ONT, Oxford, UK) and an in-house developed bioinformatics script were used to analyze the nanopore data. At genus level, similar bacterial diversity profiles were found, and five main and established genera were identified by both platforms. However, probably due to mismatching of the nanopore sequence primers, the nanopore sequencing platform identified Corynebacterium in much lower abundance compared to Illumina sequencing. Further, when using default settings in the EPI2ME workflow, almost all sequence reads that seem to belong to the bacterial genus Dolosigranulum and a considerable part to the genus Haemophilus were only identified at family level. Nanopore sequencing of single species cultures demonstrated at least 88% accurate identification of the species at genus and species level for 4/5 strains tested, including improvements in accurate sequence read identification when the basecaller Guppy and Albacore, and when flowcell versions R9.4 (Oxford Nanopore Technologies—ONT, Oxford, UK) and R9.2 (Oxford Nanopore Technologies—ONT, Oxford, UK) were compared. In conclusion, the current study shows that the nanopore sequencing platform is comparable with the Illumina platform in detection bacterial genera of the nasal microbiota, but the nanopore platform does have problems in detecting bacteria within the genus Corynebacterium. Although advances are being made, thorough validation of the nanopore platform is still recommendable.

Sign in / Sign up

Export Citation Format

Share Document