scholarly journals Genetic determinants of Pseudomonas aeruginosa biofilm establishment

Microbiology ◽  
2010 ◽  
Vol 156 (2) ◽  
pp. 431-441 ◽  
Author(s):  
Mathias Müsken ◽  
Stefano Di Fiore ◽  
Andreas Dötsch ◽  
Rainer Fischer ◽  
Susanne Häussler
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Laser Scanning ◽  
Growth Conditions ◽  
Confocal Laser Scanning Microscope ◽  
Confocal Laser ◽  
Repair System ◽  
Ph Homeostasis ◽  
Genetic Determinants ◽  
Complex Process ◽  
Genes Encoding

The establishment of bacterial biofilms on surfaces is a complex process that requires various factors for each consecutive developmental step. Here we report the screening of the comprehensive Harvard Pseudomonas aeruginosa PA14 mutant library for mutants exhibiting an altered biofilm phenotype. We analysed the capability of all mutants to form biofilms at the bottom of a 96-well plate by the use of an automated confocal laser-scanning microscope and found 394 and 285 genetic determinants of reduced and enhanced biofilm production, respectively. Overall, 67 % of the identified mutants were affected within genes encoding hypothetical proteins, indicating that novel developmental pathways are likely to be dissected in the future. Nevertheless, a common theme that emerged from the analysis of the genes with a predicted function is that the establishment of a biofilm requires regulatory components that are involved in survival under microaerophilic growth conditions, arginine metabolism, alkyl-quinolone signalling, pH homeostasis and the DNA repair system.

scholarly journals Characterization of a mucoid-like Pseudomonas aeruginosa biofilm

Fine Focus ◽  
2015 ◽  
Vol 1 (2) ◽  
pp. 121-137
Author(s):  
Brandon M. Bauer ◽  
Lewis Rogers ◽  
Monique Macias ◽  
Gabriella Iacovetti ◽  
Alexander M. Woodrow ◽  
...  
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Laser Scanning ◽  
Growth Conditions ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Chronic Infections ◽  
Planktonic Bacteria ◽  
The Difference

Pseudomonas aeruginosa biofilms are implicated in chronic infections. A key element of P. aeruginosapathogenicity is the formation of a biofilm, a community of bacteria encased in an exopolymeric substance (EPS) that shields the bacteria from the host immune response and antibiotic treatment. A crucial step in biofilm production is a switch in motility from freely swimming, planktonic bacteria to twitching movement and then to attached and sedentary bacteria that develop into a mature pillar-shaped biofilm. A mucoid biofilm produces an excess of alginate and is clinically the most pathogenic and the most resistant to antibiotics. Biofilms from patients exhibit a wide variety of structure, motility, and levels of attachment. In vitrobiofilms do not exhibit such a wide variety of structure and physiology. The difference between in vivo and in vitro biofilms has made the translation of in vitro studies into in vivo treatments difficult. Under different growth conditions in our lab, the P. aeruginosa strain PAO1 demonstrates two phenotypes: a non-mucoid and a mucoid-like phenotype. Confocal laser scanning microscopy (CLSM) indicates the mucoid-like phenotype is intermediate in height to the non-mucoid phenotype and biofilms formed in a once-flow-through chamber. Both mucoid-like and non-mucoid phenotypes exhibit a significant increase in twitching between 24 and 72 hours of development. The mucoid-like phenotype had greater attachment at 72 hours compared to non-mucoid phenotype. Therefore, the two phenotypes observed in our lab may represent the effect of environment to stimulate development of two types of biofilms by PAO1.

Effect of Cu addition to low-alloy structural steel on the resistance against corrosion by the Pseudomonas aeruginosa biofilm

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Zhong Li ◽  
Qing Lei ◽  
Luyao Huang ◽  
Chao Liu
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Photoelectron Spectroscopy ◽  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Electrochemical Analysis ◽  
Microbiologically Influenced Corrosion ◽  
Morphological Observation ◽  
Confocal Laser ◽  
Content Type ◽  
Antibacterial Performance

Purpose Low-alloy structural steels (LASS) face severe microbiologically influenced corrosion (MIC) in their service environments. To mitigate this issue, Cu is often used as an alloying element owing to its intrinsic antimicrobial activity. However, the antibacterial performance and biofilm resistance of Cu-containing LASS (Cu-LASS) are still unclear. This study aims to analyze the effect of Cu addition to 420 MP LASS on its MIC by the Pseudomonas aeruginosa biofilm. Design/methodology/approach Scanning electron microscope, confocal laser scanning microscope and X-ray photoelectron spectroscopy were used to analyze the surface morphology and composition of corrosion products. The antibacterial activities of Cu-LASS were analyzed by the spread-plate method. In addition, electrochemical analysis was conducted to characterize the corrosion behavior of the produced alloy. Findings Bacterial analysis and morphological observation confirmed a reduced sessile cell count and inactivation of the P. aeruginosa biofilm on the surface of Cu-LASS coupons. Electrochemical measurements showed that Cu-LASS exhibited large polarization and charge-transfer resistances, which indicated excellent MIC resistance. This significantly enhanced resistance to MIC could be explained by the synergistic effect of released Cu2+ from the Cu-LASS surface and immediate contact to Cu-rich phase in the surface and the release of Cu2+ ions from the Cu-LASS surface. Originality/value The effect of Cu addition on the MIC resistance and antibacterial performance of LASS is seldom reported. It is necessary to investigate the corrosion resistance of Cu-LASS and clarify its antibacterial mechanism. This paper fulfills this need.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

3-Dimensional immunolabeling and in situ hybridization detection using fluorescence photooxidation and intermediate-voltage Electron Microscopy

1994 ◽  
Vol 52 ◽  
pp. 164-165
Author(s):  
Thomas J. Deerinck ◽  
Maryann E. Martone ◽  
Varda Lev-Ram ◽  
David P. L. Green ◽  
Roger Y. Tsien ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Reactive Oxygen ◽  
Confocal Laser Scanning Microscope ◽  
Fluorescent Dye ◽  
Confocal Laser ◽  
3 Dimensional ◽  
Voltage Electron ◽  
Dimensional Distribution ◽  
Electron Microscopes ◽  
New Generation

The confocal laser scanning microscope has become a powerful tool in the study of the 3-dimensional distribution of proteins and specific nucleic acid sequences in cells and tissues. This is also proving to be true for a new generation of high contrast intermediate voltage electron microscopes (IVEM). Until recently, the number of labeling techniques that could be employed to allow examination of the same sample with both confocal and IVEM was rather limited. One method that can be used to take full advantage of these two technologies is fluorescence photooxidation. Specimens are labeled by a fluorescent dye and viewed with confocal microscopy followed by fluorescence photooxidation of diaminobenzidine (DAB). In this technique, a fluorescent dye is used to photooxidize DAB into an osmiophilic reaction product that can be subsequently visualized with the electron microscope. The precise reaction mechanism by which the photooxidation occurs is not known but evidence suggests that the radiationless transfer of energy from the excited-state dye molecule undergoing the phenomenon of intersystem crossing leads to the formation of reactive oxygen species such as singlet oxygen. It is this reactive oxygen that is likely crucial in the photooxidation of DAB.

A confocal laser scanning microscope for fluorescence and reflection at video rates

1989 ◽  
Vol 47 ◽  
pp. 134-135
Author(s):  
P.M. Houpt ◽  
A. Draaijer
Keyword(s):  
Light Source ◽  
Laser Scanning ◽  
Focal Point ◽  
Confocal Laser Scanning Microscope ◽  
Confocal Laser ◽  
Point Light Source ◽  
Volume Of Interest ◽  
Ion Laser ◽  
Point Light ◽  
Point Detector

In confocal microscopy, the object is scanned by the coinciding focal points (confocal) of a point light source and a point detector both focused on a certain plane in the object. Only light coming from the focal point is detected and, even more important, out-of-focus light is rejected.This makes it possible to slice up optically the ‘volume of interest’ in the object by moving it axially while scanning the focused point light source (X-Y) laterally. The successive confocal sections can be stored in a computer and used to reconstruct the object in a 3D image display.The instrument described is able to scan the object laterally with an Ar ion laser (488 nm) at video rates. The image of one confocal section of an object can be displayed within 40 milliseconds (1000 х 1000 pixels). The time to record the total information within the ‘volume of interest’ normally depends on the number of slices needed to cover it, but rarely exceeds a few seconds.

Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation

TAPPI Journal ◽  
2010 ◽  
Vol 9 (10) ◽  
pp. 7-15
Author(s):  
HANNA KOIVULA ◽  
DOUGLAS BOUSFIELD ◽  
MARTTI TOIVAKKA
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Print Quality ◽  
Length Scale ◽  
Offset Printing ◽  
Significant Difference ◽  
Printing Speed

In the offset printing process, ink film splitting has an important impact on formation of ink filaments. The filament size and its distribution influence the leveling of ink and hence affect ink setting and the print quality. However, ink filaments are difficult to image due to their short lifetime and fine length scale. Due to this difficulty, limited work has been reported on the parameters that influence filament size and methods to characterize it. We imaged ink filament remains and quantified some of their characteristics by changing printing speed, ink amount, and fountain solution type. Printed samples were prepared using a laboratory printability tester with varying ink levels and operating settings. Rhodamine B dye was incorporated into fountain solutions to aid in the detection of the filaments. The prints were then imaged with a confocal laser scanning microscope (CLSM) and images were further analyzed for their surface topography. Modeling of the pressure pulses in the printing nip was included to better understand the mechanism of filament formation and the origin of filament length scale. Printing speed and ink amount changed the size distribution of the observed filament remains. There was no significant difference between fountain solutions with or without isopropyl alcohol on the observed patterns of the filament remains.

Confocal and SEM imaging to demonstrate food pathogen- biofilm biocontrol by pyocyanin from Pseudomonas aeruginosa BTRY1

2016 ◽  
Vol 6 (01) ◽  
pp. 5218
Author(s):  
Laxmi Mohandas ◽  
Anju T. R. ◽  
Sarita G. Bhat*
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Antibiofilm Activity ◽  
Opportunistic Pathogens ◽  
Redox Active ◽  
Sem Imaging ◽  
The Impact

An assortment of redox-active phenazine compounds like pyocyanin with their characteristic blue-green colour are synthesized by Pseudomonas aeruginosa, Gram-negative opportunistic pathogens, which are also considered one of the most commercially valuable microorganisms. In this study, pyocyanin from Pseudomonas aeruginosa BTRY1 from food sample was assessed for its antibiofilm activity by micro titer plate assay against strong biofilm producers belonging to the genera Bacillus, Staphylococcus, Brevibacterium and Micrococcus. Pyocyanin inhibited biofilm activity in very minute concentrations. This was also confirmed by Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM). Both SEM and CLSM helped to visualize the biocontrol of biofilm formation by eight pathogens. The imaging and quantification by CLSM also established the impact of pyocyanin on biofilm-biocontrol mainly in the food industry.

scholarly journals Cephalosporin nitric oxide-donor prodrug DEA-C3D disperses biofilms formed by clinical cystic fibrosis isolates of Pseudomonas aeruginosa

2019 ◽  
Vol 75 (1) ◽  
pp. 117-125 ◽  
Author(s):  
Odel Soren ◽  
Ardeshir Rineh ◽  
Diogo G Silva ◽  
Yuming Cai ◽  
Robert P Howlin ◽  
...  
Keyword(s):  
Nitric Oxide ◽  
Cystic Fibrosis ◽  
Pseudomonas Aeruginosa ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Clinical Isolates ◽  
Nitric Oxide Donor ◽  
Confocal Laser ◽  
Broth Microdilution Method

Abstract Objectives The cephalosporin nitric oxide (NO)-donor prodrug DEA-C3D (‘DiEthylAmin-Cephalosporin-3′-Diazeniumdiolate’) has been shown to initiate the dispersal of biofilms formed by the Pseudomonas aeruginosa laboratory strain PAO1. In this study, we investigated whether DEA-C3D disperses biofilms formed by clinical cystic fibrosis (CF) isolates of P. aeruginosa and its effect in combination with two antipseudomonal antibiotics, tobramycin and colistin, in vitro. Methods β-Lactamase-triggered release of NO from DEA-C3D was confirmed using a gas-phase chemiluminescence detector. MICs for P. aeruginosa clinical isolates were determined using the broth microdilution method. A crystal violet staining technique and confocal laser scanning microscopy were used to evaluate the effects of DEA-C3D on P. aeruginosa biofilms alone and in combination with tobramycin and colistin. Results DEA-C3D was confirmed to selectively release NO in response to contact with bacterial β-lactamase. Despite lacking direct, cephalosporin/β-lactam-based antibacterial activity, DEA-C3D was able to disperse biofilms formed by three P. aeruginosa clinical isolates. Confocal microscopy revealed that DEA-C3D in combination with tobramycin produces similar reductions in biofilm to DEA-C3D alone, whereas the combination with colistin causes near complete eradication of P. aeruginosa biofilms in vitro. Conclusions DEA-C3D is effective in dispersing biofilms formed by multiple clinical isolates of P. aeruginosa and could hold promise as a new adjunctive therapy to patients with CF.

Sign in / Sign up

Export Citation Format

Share Document