Enabling technologies for ice giant exploration

2020 ◽  
Vol 378 (2187) ◽  
pp. 20190488 ◽  
Author(s):  
Thomas R. Spilker
Keyword(s):  
New Technology ◽  
Giant Planet ◽  
Development Work ◽  
Enabling Technology ◽  
Power Sources ◽  
The Past ◽  
Engineering Development ◽  
Enabling Technologies ◽  
The Cost ◽  
Development Tasks

Future missions to an ice giant planet, especially orbital missions, are technologically challenging. But with one exception, radioisotope power sources (RPSs), the technologies that would enable such missions are currently available. RPSs are not a new technology, but devices used in the past that are appropriate to an ice giant mission are no longer available without engineering development work (currently unfunded), and it is uncertain whether the new NASA unit under development will be available for flight in time to take advantage of the best transfer trajectories of the next 15 years. This paper describes technologies already in hand that enable an ice giant mission, but for them to be useful they must be maintained. If an enabling technology is lost a replacement must be developed, potentially impacting the cost and schedule of a mission. In addition to the enabling technologies, there are a number of technologies that, while not enabling, could greatly enhance the science return and science value of a mission, making the programmatic aspects of approval an easier task and the funding of those development tasks a high priority. This article is part of a discussion meeting issue ‘Future exploration of ice giant systems'.

scholarly journals Enabling technologies for the preparation of multifunctional “bullets” for nanomedicine

2018 ◽  
pp. 134-143
Author(s):  
K. Martina ◽  
L. Serpe ◽  
R. Cavalli ◽  
G. Cravotto
Keyword(s):  
Ultrasound Irradiation ◽  
Stimuli Responsive ◽  
Enabling Technology ◽  
Drug Formulations ◽  
Transdisciplinary Approach ◽  
Drug Candidates ◽  
The Past ◽  
New Drug ◽  
Enabling Technologies ◽  
Diagnostic Agents

Recent advances in nanotechnology, including modern enabling techniques that can improve synthetic preparation and drug formulations, have opened up new frontiers in nanomedicine with the development of nanoscale carriers and assemblies. The use of delivery platforms has attracted attention over the past decade as researchers shift their focus away from the development of new drug candidates, and toward new means with which to deliver therapeutic and/or diagnostic agents. This work will explore a transdisciplinary approach for the production of a number of nanomaterials, nanocomplexes and nanobubbles and their application in a variety of potential biological and theranostic protocols. Particular attention will be paid to nanobubbles, stimuli responsive nanoparticles and cyclodextrin grafted nanosystems produced under non-conventional conditions, such as microwave and ultrasound irradiation. Besides nanoparticles preparation, ultrasound can also act as an enabling technology when activating sensitive nanobubbles and nanoparticles.

scholarly journals Application of ecologically balanced technologies of rice cultivation in the Krasnodar Territory

2021 ◽  
Vol 273 ◽  
pp. 01017
Author(s):  
Igor Prikhodko ◽  
Stanislav Vladimirov ◽  
Daniel Alexandrov
Keyword(s):  
Drip Irrigation ◽  
New Technology ◽  
Rice Cultivation ◽  
Soil Conditions ◽  
Rice Grain ◽  
Surface Irrigation ◽  
Labor Costs ◽  
Irrigation Rate ◽  
The Past ◽  
The Cost

The domestic and foreign research in the field of rice cultivation carried out over the past 10-15 years has identified four main promising technologies that can reduce the cost of rice produced: 1 - intermittent flooding; 2 - periodic moistening without creating a layer of water; 3 - sprinkling, including surface irrigation; 4 - drip irrigation. Drip irrigation of rice is the most priority area of research, since it can significantly reduce the irrigation rate, labor costs, the cost of rice production and anthropogenic load. The purpose of our research was to develop a new technology of rice cultivation with drip irrigation adapted for the climatic and soil conditions of the Krasnodar Territory. As a result of the research carried out, a drip irrigation technological scheme was developed and implemented for LLC “Chernoerkovskoye” of the Slavyansky District of the Krasnodar Territory. The developed scheme of rice cultivation on drip irrigation has proven its effectiveness, which was expressed in improving the reclamation state of soils, increasing the profitability of production by 22% and increasing the yield by 20%, reducing the irrigation rate by an average of 5.3 times, the cost of rice grain by 15% and labor intensity by 34%.

Measuring the cost of environmental compliance for Waikato dairy farmers - a survey approach

2015 ◽  
Vol 77 ◽  
pp. 159-166
Author(s):  
T.O.R. Macdonald ◽  
J.S. Rowarth ◽  
F.G. Scrimgeour
Keyword(s):  
Qualitative Data ◽  
Management Practice ◽  
Dairy Farm ◽  
Environmental Compliance ◽  
Dairy Farmers ◽  
The Past ◽  
Farm Systems ◽  
The Cost ◽  
Farm System ◽  
Survey Approach

The link between dairy farm systems and cost of environmental compliance is not always clear. A survey of Waikato dairy farmers was conducted to establish the real (non-modelled) cost of compliance with environmental regulation in the region. Quantitative and qualitative data were gathered to improve understanding of compliance costs and implementation issues for a range of Waikato farm systems. The average oneoff capital cost of compliance determined through a survey approach was $1.02 per kg milksolids, $1490 per hectare and $403 per cow. Costs experienced by Waikato farmers have exceeded average economic farm surplus for the region in the past 5 years. As regulation increases there are efficiencies to be gained through implementing farm infrastructure and farm management practice to best match farm system intensity. Keywords: Dairy, compliance, farm systems, nitrogen, Waikato

Fluorocarbon Precursor for High Aspect Ratio via Milling in Focused Ion Beam Modification of Integrated Circuits

2004 ◽  
Author(s):  
Valery Ray
Keyword(s):  
Side Effects ◽  
Aspect Ratio ◽  
Integrated Circuits ◽  
High Aspect Ratio ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Enabling Technology ◽  
Si Substrate ◽  
Ion Beam Modification ◽  
The Past

Abstract Gas Assisted Etching (GAE) is the enabling technology for High Aspect Ratio (HAR) circuit access via milling in Focused Ion Beam (FIB) circuit modification. Metal interconnect layers of microelectronic Integrated Circuits (ICs) are separated by Inter-Layer Dielectric (ILD) materials, therefore HAR vias are typically milled in dielectrics. Most of the etching precursor gases presently available for GAE of dielectrics on commercial FIB systems, such as XeF2, Cl2, etc., are also effective etch enhancers for either Si, or/and some of the metals used in ICs. Therefore use of these precursors for via milling in dielectrics may lead to unwanted side effects, especially in a backside circuit edit approach. Making contacts to the polysilicon lines with traditional GAE precursors could also be difficult, if not impossible. Some of these precursors have a tendency to produce isotropic vias, especially in Si. It has been proposed in the past to use fluorocarbon gases as precursors for the FIB milling of dielectrics. Preliminary experimental evaluation of Trifluoroacetic (Perfluoroacetic) Acid (TFA, CF3COOH) as a possible etching precursor for the HAR via milling in the application to FIB modification of ICs demonstrated that highly enhanced anisotropic milling of SiO2 in HAR vias is possible. A via with 9:1 aspect ratio was milled with accurate endpoint on Si and without apparent damage to the underlying Si substrate.

Effects and Risks of Distance Learning in Higher Education

2020 ◽  
pp. 61-73
Author(s):  
Yu. M. Tsygalov
Keyword(s):  
Higher Education ◽  
Distance Learning ◽  
Online Education ◽  
New Technology ◽  
Negative Consequences ◽  
Higher Education System ◽  
First Results ◽  
Spread Of Infection ◽  
The Cost

The forced work of Russian universities remotely in the context of the pandemic (COVID-19) has generated a lot of discussion about the benefits of the new form of education. The first results were summed up and reports were presented, the materials of which showed that the main goal of online education — the prevention of the spread of infection, - has been achieved. Against this background, proposals and publications have appeared substantiating the effectiveness of the massive introduction of distance learning in Russia, including in higher education. However, the assessment of such training by the population and students in publications and in social networks was predominantly negative and showed that the number of emerging problems exceeds the possible benefits of the new educational technology. Based on the analysis of the materials of publications and personal experience of teaching online, the potential benefits and problems of distance learning in higher education in Russia are considered. It is proposed to consider the effects separately for the suppliers of new technology (government, universities) and consumers (students, teachers, society). It is substantiated that the massive introduction of online education allows not only to reduce the negative consequences of epidemics, but also to reduce budgetary funding for universities, optimize the age composition of teachers, and reduce the cost of maintaining educational buildings. However, there will be a leveling / averaging of the quality of education, and responsibility for the quality of training will shift from the state/universities to students. The critical shortcomings of online education are the low degree of readiness of the digital infrastructure, the lack of a mechanism for identifying and monitoring the work of students, information security problems, and the lack of trust in such training of the population. The massive use of online education creates a number of risks for the country, the most critical of which is the destruction of the higher education system and a drop in the effectiveness of personnel training. The consequences of this risk realization are not compensated by any possible budget savings.

Attraction of prey

2018 ◽  
Author(s):  
John D. Horner ◽  
Bartosz J. Płachno ◽  
Ulrike Bauer ◽  
Bruno Di Giusto
Keyword(s):  
Visual Cues ◽  
Synergistic Action ◽  
Carnivorous Plants ◽  
Future Research ◽  
Acoustic Cues ◽  
Qualitative And Quantitative Analysis ◽  
Qualitative And Quantitative ◽  
The Past ◽  
The Cost ◽  
Prey Attraction

The ability to attract prey has long been considered a universal trait of carnivorous plants. We review studies from the past 25 years that have investigated the mechanisms by which carnivorous plants attract prey to their traps. Potential attractants include nectar, visual, olfactory, and acoustic cues. Each of these has been well documented to be effective in various species, but prey attraction is not ubiquitous among carnivorous plants. Directions for future research, especially in native habitats in the field, include: the qualitative and quantitative analysis of visual cues, volatiles, and nectar; temporal changes in attractants; synergistic action of combinations of attractants; the cost of attractants; and responses to putative attractants in electroantennograms and insect behavioral tests.

The Undergraduate Marketing Research Course: Two Decades of Change

2020 ◽  
pp. 027347532096050
Author(s):  
Eileen Bridges
Keyword(s):  
Data Collection ◽  
Data Analytics ◽  
New Technology ◽  
Marketing Research ◽  
Customer Data ◽  
Critical Gap ◽  
The Past ◽  
Data Collection And Analysis ◽  
Marketing Data ◽  
Observational Techniques

This article looks back over the past two decades to describe how teaching of undergraduate marketing research has (or has not) changed. Sweeping changes in technology and society have certainly affected how marketing research is designed and implemented—but how has this affected teaching of this important topic? Although the purpose of marketing research is still to better understand target customer needs, the tools are different now: customer data are typically collected using technology-based interfaces in place of such instruments as mailed, telephone, or in-person surveys. Observational techniques collect more data electronically rather than requiring a human recorder. Similarly, sampling has changed: sample frames are no longer widely used. Many of these changes are not yet fully discussed in marketing research courses. On the other hand, there is increasing interest in and availability of courses and programs in marketing data analytics, which teach specialized skills related to analysis and interpretation of electronic databases. Perhaps even more importantly, new technology-based tools permit greater automation of data collection and analysis, and presentation of findings. A critical gap is identified in this article; specifically, effort is needed to better integrate the perspectives of data collection and data analysis given current research conditions.

Mechanical Analysis of Warm Extrusion Precision Forming on 42CrMo Steel Cutting Pick

2012 ◽  
Vol 538-541 ◽  
pp. 1061-1066 ◽  
Author(s):  
Chun Jian Su ◽  
Quan Lan Li ◽  
Lin Jing Xiao ◽  
Su Min Guo
Keyword(s):  
New Technology ◽  
Mechanical Analysis ◽  
Extrusion Force ◽  
Factors Affecting ◽  
42Crmo Steel ◽  
Pick Body ◽  
Mining Tool ◽  
Main Factors ◽  
The Cost ◽  
Warm Extrusion

Cutting pick is a kind of widely-used consumptive mining tool. The traditional producing technics of cutting pick body is foundry, or machining after roughly forging, or machining directly from metal bar. By former technics, the property of products is poor, and by latter, the material availability is low and the cost is high. The patent technology for cutting pick body warm extrusion introduced in this paper can overcome all the disadvantages mentioned above. In this paper, by analyzing the characteristic of cutting pick body warm extrusion, adopting the principle of power balance to solve the approximate solution of strain forces, the approximate calculating formulas of extruding power are deduced. The main factors affecting on extrusion force are determined theoretically. This research can be used as basis to design tooling and choose proper equipment for this new technology.

International responses to weather modification

1975 ◽  
Vol 29 (3) ◽  
pp. 805-826 ◽  
Author(s):  
Edith Brown Weiss
Keyword(s):  
International Cooperation ◽  
New Technology ◽  
International Community ◽  
Weather Modification ◽  
Weather System ◽  
The Past ◽  
Time Horizons ◽  
Weather And Climate ◽  
Potential Problems ◽  
Do So

In the past few decades we have been improving our understanding of the weather system and exploring ways to modify it. Over sixty countries have experimented with modifying the weather. The new technology of weather and climate modification will raise important political problems which will demand new responses from the international community. Whether states will be able to establish the cooperative measures necessary to develop and manage new technology depends upon whether there are sufficient incentives to do so. This article analyzes the historical patterns of international cooperation in meteorology, and then plots against several time horizons projected developments and capabilities in weather modification technology and the potential problems emerging from using the technology. It derives a tentative picture of the responsibilities demanded, compares the likely responses with those needed, and assesses whether they will be adequate for the problems projected.

Are Apprenticeships Still Relevant in the 21st Century? A Case Study of Changing Youth Training Arrangements in German Banks

ILR Review ◽  
2002 ◽  
Vol 55 (4) ◽  
pp. 667-685 ◽  
Author(s):  
David Finegold ◽  
Karin Wagner
Keyword(s):  
21St Century ◽  
Cost Savings ◽  
New Firms ◽  
Workplace Flexibility ◽  
Transferable Skills ◽  
The Past ◽  
Detailed Case ◽  
The Cost ◽  
Youth Training

The authors present a detailed case study of the evolution of apprenticeships in German banking over the past two decades to analyze why employers continue to be willing to invest in these programs that provide workers with transferable skills. They explain employers' motivation in terms of two “logics.” Some considerations stemming from the logic of consequences, such as recruitment cost savings and enhanced workplace flexibility, encourage retention of the apprenticeship system. On balance, however, the cost calculus that is at the heart of the logic of consequences would, if unopposed, encourage head-hunting for apprentices trained by other firms, eventually undermining the system. The countervailing logic of appropriateness, however, discourages defections from the system by fostering trust among employers, encouraging new firms to participate in the system, supporting the strong reputational effect associated with training, and creating mechanisms with which banks can have a hand in keeping the system efficient.

Sign in / Sign up

Export Citation Format

Share Document