scholarly journals Topological three-dimensional dissipative optical solitons

2018 ◽  
Vol 376 (2124) ◽  
pp. 20170367 ◽  
Author(s):  
N. A. Veretenov ◽  
S. V. Fedorov ◽  
N. N. Rosanov
Keyword(s):  
Three Dimensional ◽  
Dissipative Structures ◽  
Optical Solitons ◽  
Dissipative Systems ◽  
Saturable Absorption ◽  
3D Space ◽  
Straight Line ◽  
Different Types ◽  
Laser Media ◽  
Extreme Stability

This article presents a review of recent investigations of topological three-dimensional (3D) dissipative optical solitons in homogeneous laser media with fast nonlinearity of amplification and absorption. The solitons are found numerically, with their formation, by embedding two-dimensional laser solitons or their complexes in 3D space after their rotation around a vortex straight line with their simultaneous twist. After a transient, the ‘hula-hoop’ solitons can form with a number of closed and unclosed infinite vortex lines, i.e. the solitons are tangles in topological notation. They are attractors and are characterized by extreme stability. The solitons presented here can be realized in lasers with fast saturable absorption and are promising for information applications. The tangle solitons of the type described present an example of self-organization that can be found not only in optics but also in various distributed dissipative systems of different types. This article is part of the theme issue ‘Dissipative structures in matter out of equilibrium: from chemistry, photonics and biology (part 1)’.

Fractal Dimensionalities

2018 ◽  
Vol 6 (3) ◽  
pp. 33-48 ◽  
Author(s):  
Л. Жихарев ◽  
L. Zhikharev
Keyword(s):  
Three Dimensional ◽  
Fractal Sets ◽  
Three Dimensional Modeling ◽  
3D Space ◽  
Wolfram Mathematica ◽  
Dimensional Modeling ◽  
Straight Line ◽  
Fractal Parameters ◽  
Definition Of

One of the most important characteristics of a fractal is its dimensionality. In general, there are several options for mathematical definition of this value, but usually under the object dimensionality is understood the degree of space filling by it. It is necessary to distinguish the dimensionality of space and the dimension of multitude. Segment, square and cube are objects with dimensionality 1, 2 and 3, which can be in respective spaces: on a straight line, plane or in a 3D space. Fractals can have a fractional dimensionality. By definition, proposed by Bernois Mandelbrot, this fractional dimensionality should be less than the fractal’s topological dimension. Abram Samoilovich Bezikovich (1891–1970) was the author of first mathematical conclusions based on Felix Hausdorff (1868–1942) arguments and allowing determine the fractional dimensionality of multitudes. Bezikovich – Hausdorff dimensionality is determined through the multitude covering by unity elements. In practice, it is more convenient to use Minkowsky dimensionality for determining the fractional dimensionalities of fractals. There are also numerical methods for Minkowsky dimensionality calculation. In this study various approaches for fractional dimensionality determining are tested, dimensionalities of new fractals are defined. A broader view on the concept of dimensionality is proposed, its dependence on fractal parameters and interpretation of fractal sets’ structure are determined. An attempt for generalization of experimental dependences and determination of general regularities for fractals structure influence on their dimensionality is realized. For visualization of three-dimensional geometrical constructions, and plain evidence of empirical hypotheses were used computer models developed in the software for three-dimensional modeling (COMPASS, Inventor and SolidWorks), calculations were carried out in mathematical packages such as Wolfram Mathematica.

Three-dimensional waypoint following for fixed-wing unmanned aerial vehicles in obstacle-filled environments

2019 ◽  
Vol 234 (3) ◽  
pp. 640-654
Author(s):  
Nikhil Kumar Singh ◽  
Sikha Hota
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Optimal Path ◽  
Three Dimensional ◽  
Computation Time ◽  
Two Dimensional ◽  
Aerial Vehicles ◽  
Optimal Paths ◽  
Straight Line ◽  
Different Types ◽  
Simulation Results

The paper computes optimal paths for fixed-wing unmanned aerial vehicles with bounded turn radii to follow a series of waypoints with specified directions in a three-dimensional obstacle-filled environment. In the existing literature, it was proved that the optimal path is of circular turn–straight line–circular turn (CSC) type for two consecutive waypoint configurations, when the points are sufficiently far apart and there is no obstacle in the field. The maximum of all minimum turn radii corresponding to all possible two-dimensional circular maneuvers was used for both the initial and final turns to develop the CSC-type paths. But, this paper considers the minimum turn radii for initial and final turns, corresponding to the maneuvering planes and which produces shorter CSC-type paths. In an obstacle-filled environment the shortest path may collide with obstacles, so a strategy is proposed to switch to the next best path that does not collide with obstacles. Using this technique, a series of waypoints is followed in the presence of obstacles of different types, for example, cylindrical, hemispherical, and spherical in shapes with different sizes. Finally, simulation results are presented to show the efficiency of the algorithm for obstacle avoidance. The computation time listed here indicates the potentiality of this algorithm for implementation in real time.

Ultrastructural Investigations of the Contractile Filaments of Amoebae

1974 ◽  
Vol 32 ◽  
pp. 188-189
Author(s):  
P.L. Moore
Keyword(s):  
Cytoplasmic Streaming ◽  
Three Dimensional ◽  
Freeze Fracture ◽  
Amoeboid Movement ◽  
Different Types ◽  
Chemical Conditions ◽  
Complete Interpretation

Previous freeze fracture results on the intact giant, amoeba Chaos carolinensis indicated the presence of a fibrillar arrangement of filaments within the cytoplasm. A complete interpretation of the three dimensional ultrastructure of these structures, and their possible role in amoeboid movement was not possible, since comparable results could not be obtained with conventional fixation of intact amoebae. Progress in interpreting the freeze fracture images of amoebae required a more thorough understanding of the different types of filaments present in amoebae, and of the ways in which they could be organized while remaining functional.The recent development of a calcium sensitive, demembranated, amoeboid model of Chaos carolinensis has made it possible to achieve a better understanding of such functional arrangements of amoeboid filaments. In these models the motility of demembranated cytoplasm can be controlled in vitro, and the chemical conditions necessary for contractility, and cytoplasmic streaming can be investigated. It is clear from these studies that “fibrils” exist in amoeboid models, and that they are capable of contracting along their length under conditions similar to those which cause contraction in vertebrate muscles.

A Study on Utilization of Three-Dimensional Sensor Lip Image for Developing a Pronunciation Recognition System

2019 ◽  
Vol 63 (5) ◽  
pp. 50402-1-50402-9 ◽  
Author(s):  
Ing-Jr Ding ◽  
Chong-Min Ruan
Keyword(s):  
Principal Component Analysis ◽  
Automatic Speech Recognition ◽  
Feature Fusion ◽  
Three Dimensional ◽  
Principal Component ◽  
Recognition System ◽  
Geometrical Characteristics ◽  
3D Geometry ◽  
Different Types ◽  
The Disabled

Abstract The acoustic-based automatic speech recognition (ASR) technique has been a matured technique and widely seen to be used in numerous applications. However, acoustic-based ASR will not maintain a standard performance for the disabled group with an abnormal face, that is atypical eye or mouth geometrical characteristics. For governing this problem, this article develops a three-dimensional (3D) sensor lip image based pronunciation recognition system where the 3D sensor is efficiently used to acquire the action variations of the lip shapes of the pronunciation action from a speaker. In this work, two different types of 3D lip features for pronunciation recognition are presented, 3D-(x, y, z) coordinate lip feature and 3D geometry lip feature parameters. For the 3D-(x, y, z) coordinate lip feature design, 18 location points, each of which has 3D-sized coordinates, around the outer and inner lips are properly defined. In the design of 3D geometry lip features, eight types of features considering the geometrical space characteristics of the inner lip are developed. In addition, feature fusion to combine both 3D-(x, y, z) coordinate and 3D geometry lip features is further considered. The presented 3D sensor lip image based feature evaluated the performance and effectiveness using the principal component analysis based classification calculation approach. Experimental results on pronunciation recognition of two different datasets, Mandarin syllables and Mandarin phrases, demonstrate the competitive performance of the presented 3D sensor lip image based pronunciation recognition system.

Simulating Self-Regeneration and Self-Replication Processes Using Movable Cellular Automata with a Mutual Equilibrium Neighborhood

2020 ◽  
Vol 29 (4) ◽  
pp. 741-757
Author(s):  
Kateryna Hazdiuk ◽  
◽  
Volodymyr Zhikharevich ◽  
Serhiy Ostapov ◽  
◽  
...  
Keyword(s):  
Cellular Automata ◽  
Cellular Automaton ◽  
Three Dimensional ◽  
Computer Models ◽  
The Self ◽  
Model Construction ◽  
Natural Phenomena ◽  
Different Types ◽  
Movable Cellular Automata ◽  
Self Replication

This paper deals with the issue of model construction of the self-regeneration and self-replication processes using movable cellular automata (MCAs). The rules of cellular automaton (CA) interactions are found according to the concept of equilibrium neighborhood. The method is implemented by establishing these rules between different types of cellular automata (CAs). Several models for two- and three-dimensional cases are described, which depict both stable and unstable structures. As a result, computer models imitating such natural phenomena as self-replication and self-regeneration are obtained and graphically presented.

Geological Field Sketches and Illustrations

2019 ◽  
Author(s):  
Matthew J. Genge
Keyword(s):  
Cross Sections ◽  
Earth Science ◽  
Three Dimensional ◽  
Worked Examples ◽  
Scientific Publications ◽  
Thin Sections ◽  
Geological Features ◽  
Different Types ◽  
The Subject

Drawings, illustrations, and field sketches play an important role in Earth Science since they are used to record field observations, develop interpretations, and communicate results in reports and scientific publications. Drawing geology in the field furthermore facilitates observation and maximizes the value of fieldwork. Every geologist, whether a student, academic, professional, or amateur enthusiast, will benefit from the ability to draw geological features accurately. This book describes how and what to draw in geology. Essential drawing techniques, together with practical advice in creating high quality diagrams, are described the opening chapters. How to draw different types of geology, including faults, folds, metamorphic rocks, sedimentary rocks, igneous rocks, and fossils, are the subjects of separate chapters, and include descriptions of what are the important features to draw and describe. Different types of sketch, such as drawings of three-dimensional outcrops, landscapes, thin-sections, and hand-specimens of rocks, crystals, and minerals, are discussed. The methods used to create technical diagrams such as geological maps and cross-sections are also covered. Finally, modern techniques in the acquisition and recording of field data, including photogrammetry and aerial surveys, and digital methods of illustration, are the subject of the final chapter of the book. Throughout, worked examples of field sketches and illustrations are provided as well as descriptions of the common mistakes to be avoided.

scholarly journals Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 444
Author(s):  
Guoning Si ◽  
Liangying Sun ◽  
Zhuo Zhang ◽  
Xuping Zhang
Keyword(s):  
Degrees Of Freedom ◽  
Dynamic Properties ◽  
Three Dimensional ◽  
Polyimide Film ◽  
Zebrafish Embryos ◽  
Multiple Degrees Of Freedom ◽  
Electrothermal Actuator ◽  
3D Space ◽  
Pick And Place

This paper presents the design, fabrication, and testing of a novel three-dimensional (3D) three-fingered electrothermal microgripper with multiple degrees of freedom (multi DOFs). Each finger of the microgripper is composed of a V-shaped electrothermal actuator providing one DOF, and a 3D U-shaped electrothermal actuator offering two DOFs in the plane perpendicular to the movement of the V-shaped actuator. As a result, each finger possesses 3D mobilities with three DOFs. Each beam of the actuators is heated externally with the polyimide film. The durability of the polyimide film is tested under different voltages. The static and dynamic properties of the finger are also tested. Experiments show that not only can the microgripper pick and place microobjects, such as micro balls and even highly deformable zebrafish embryos, but can also rotate them in 3D space.

A biomimetic 3D airflow sensor made of an array of two piezoelectric metal-core fibers

Sensor Review ◽  
2017 ◽  
Vol 37 (3) ◽  
pp. 312-321 ◽  
Author(s):  
Yixiang Bian ◽  
Can He ◽  
Kaixuan Sun ◽  
Longchao Dai ◽  
Hui Shen ◽  
...  
Keyword(s):  
Design Methodology ◽  
Spherical Surface ◽  
Three Dimensional ◽  
Three Dimensions ◽  
Piezoceramic Cylinder ◽  
Metal Core ◽  
Content Type ◽  
3D Space ◽  
Highly Sensitive ◽  
Airflow Sensor

Purpose The purpose of this paper is to design and fabricate a three-dimensional (3D) bionic airflow sensing array made of two multi-electrode piezoelectric metal-core fibers (MPMFs), inspired by the structure of a cricket’s highly sensitive airflow receptor (consisting of two cerci). Design/methodology/approach A metal core was positioned at the center of an MPMF and surrounded by a hollow piezoceramic cylinder. Four thin metal films were spray-coated symmetrically on the surface of the fiber that could be used as two pairs of sensor electrodes. Findings In 3D space, four output signals of the two MPMFs arrays can form three “8”-shaped spheres. Similarly, the sensing signals for the same airflow are located on a spherical surface. Originality/value Two MPMF arrays are sufficient to detect the speed and direction of airflow in all three dimensions.

Study on the performance of different types of three-dimensional chromatographic systems

2013 ◽  
Vol 1271 (1) ◽  
pp. 137-143 ◽  
Author(s):  
Ekaterina Davydova ◽  
Peter J. Schoenmakers ◽  
Gabriel Vivó-Truyols
Keyword(s):  
Three Dimensional ◽  
Different Types
Sign in / Sign up

Export Citation Format

Share Document