scholarly journals Graded metascreens to enable a new degree of nanoscale light management

2015 ◽  
Vol 373 (2049) ◽  
pp. 20140351 ◽  
Author(s):  
Nasim Mohammadi Estakhri ◽  
Christos Argyropoulos ◽  
Andrea Alù
Keyword(s):  
Electromagnetic Waves ◽  
Polarization State ◽  
Three Dimensional ◽  
Single Layer ◽  
Absorption Enhancement ◽  
Management Technique ◽  
Optical Waves ◽  
Novel Approach ◽  
Local Wave ◽  
Light Management

Optical metasurfaces, typically referred to as two-dimensional metamaterials, are arrays of engineered subwavelength inclusions suitably designed to tailor the light properties, including amplitude, phase and polarization state, over deeply subwavelength scales. By exploiting anomalous localized interactions of surface elements with optical waves, metasurfaces can go beyond the functionalities offered by conventional diffractive optical gratings. The innate simplicity of implementation and the distinct underlying physics of their wave–matter interaction distinguish metasurfaces from three-dimensional metamaterials and provide a valuable means of moulding optical waves in the desired manner. Here, we introduce a general approach based on the electromagnetic equivalence principle to develop and synthesize graded, non-periodic metasurfaces to generate arbitrarily prescribed distributions of electromagnetic waves. Graded metasurfaces are realized with a single layer of spatially modulated, electrically polarizable nanoparticles, tailoring the scattering response of the surface with nanoscale resolutions. We discuss promising applications based on the proposed local wave management technique, including the design of ultrathin optical carpet cloaks, alignment-free polarization beam splitters and a novel approach to enable broadband light absorption enhancement in thin-film solar cells. This concept opens up a practical route towards efficient planarized optical structures with potential impact on the integrated nanophotonic technology.

scholarly journals Taming the Electromagnetic Boundaries via Metasurfaces: From Theory and Fabrication to Functional Devices

2015 ◽  
Vol 2015 ◽  
pp. 1-80 ◽  
Author(s):  
Xiangang Luo ◽  
Mingbo Pu ◽  
Xiaoliang Ma ◽  
Xiong Li
Keyword(s):  
Electromagnetic Waves ◽  
Low Cost ◽  
Polarization State ◽  
Three Dimensional ◽  
Current Status ◽  
Future Trends ◽  
State Control ◽  
The World ◽  
Response Phase ◽  
High Degree

As two-dimensional metamaterials, metasurfaces have received rapidly increasing attention from researchers all over the world. Unlike three-dimensional metamaterials, metasurfaces can be utilized to control the electromagnetic waves within one infinitely thin layer, permitting substantial advantages, such as easy fabrication, low cost, and high degree of integration. This paper reviews the history and recent development of metasurfaces, with particular emphasis on the theory and applications relating to the frequency response, phase shift, and polarization state control. Based on the current status of various applications, the challenges and future trends of metasurfaces are discussed.

Numerical Analysis on the Radiant Characteristics of Three-Dimensional Random Rough Surfaces

2009 ◽  
Author(s):  
Yanhui Feng ◽  
Wei Liu ◽  
Xinxin Zhang
Keyword(s):  
Electromagnetic Waves ◽  
Rough Surfaces ◽  
Polarization State ◽  
Radiation Heat Transfer ◽  
Three Dimensional ◽  
Simulation Method ◽  
Scattering Angle ◽  
Scattering Intensity ◽  
Random Rough Surfaces ◽  
Shadowing Effect

In the area of micro- and nano-scale radiation heat transfer, the radiant characteristics of rough surfaces have drawn increasing attention. In this paper, three-dimensional Gaussian random rough surfaces were created by the Monte Carlo simulation method. Ray tracing method combined with the Kirchhoff approximation was employed to analyze the shadowing effect of random surfaces with different roughness. The relative scattering intensity from rough surfaces was further investigated by the Fresnel law. The results indicated that the peak of the relative scattering intensity occurred at the anti-scattering angle and the scattering distributions were continuous. With increasing surface roughness, the height of the peak became lower, the width of distribution became wider, and the distribution range of the scattering angle and the azimuth of the reflection electromagnetic waves increased. Furthermore, the relative scattering intensity concentrated in the vicinity of the anti-scattering angle and the largest scattering intensity occurred in the specular direction. Taking into account of the effects of polarization state and wavelength of incidence waves, it was shown that the relative scattering intensity of s polarized incident wave was slightly larger than that of p polarization, while the relative scattering intensity became stronger as the wavelength increased.

scholarly journals Metasurface holography: from fundamentals to applications

Nanophotonics ◽  
2018 ◽  
Vol 7 (6) ◽  
pp. 1169-1190 ◽  
Author(s):  
Lingling Huang ◽  
Shuang Zhang ◽  
Thomas Zentgraf
Keyword(s):  
Data Storage ◽  
Electromagnetic Waves ◽  
High Performance ◽  
Frequency Conversion ◽  
Polarization State ◽  
Three Dimensional ◽  
Functional Materials ◽  
Gradual Transition ◽  
Nonlinear Frequency ◽  
Design Strategies

AbstractHolography has emerged as a vital approach to fully engineer the wavefronts of light since its invention dating back to the last century. However, the typically large pixel size, small field of view and limited space-bandwidth impose limitations in the on-demand high-performance applications, especially for three-dimensional displays and large-capacity data storage. Meanwhile, metasurfaces have shown great potential in controlling the propagation of light through the well-tailored scattering behavior of the constituent ultrathin planar elements with a high spatial resolution, making them suitable for holographic beam-shaping elements. Here, we review recent developments in the field of metasurface holography, from the classification of metasurfaces to the design strategies for both free-space and surface waves. By employing the concepts of holographic multiplexing, multiple information channels, such as wavelength, polarization state, spatial position and nonlinear frequency conversion, can be employed using metasurfaces. Meanwhile, the switchable metasurface holography by the integration of functional materials stimulates a gradual transition from passive to active elements. Importantly, the holography principle has become a universal and simple approach to solving inverse engineering problems for electromagnetic waves, thus allowing various related techniques to be achieved.

Characterization of a monolayer graphitic structure

1994 ◽  
Vol 52 ◽  
pp. 760-761
Author(s):  
X. Lin ◽  
X. K. Wang ◽  
V. P. Dravid ◽  
J. B. Ketterson ◽  
R. P. H. Chang
Keyword(s):  
Three Dimensional ◽  
Single Layer ◽  
Synthesis Process ◽  
Graphitic Structure ◽  
Positive Gaussian Curvature ◽  
Graphitic Sheet ◽  
Structural And Electronic Properties ◽  
New Material ◽  
Hexagonal Network

For small curvatures of a graphitic sheet, carbon atoms can maintain their preferred sp2 bonding while allowing the sheet to have various three-dimensional geometries, which may have exotic structural and electronic properties. In addition the fivefold rings will lead to a positive Gaussian curvature in the hexagonal network, and the sevenfold rings cause a negative one. By combining these sevenfold and fivefold rings with sixfold rings, it is possible to construct complicated carbon sp2 networks. Because it is much easier to introduce pentagons and heptagons into the single-layer hexagonal network than into the multilayer network, the complicated morphologies would be more common in the single-layer graphite structures. In this contribution, we report the observation and characterization of a new material of monolayer graphitic structure by electron diffraction, HREM, EELS.The synthesis process used in this study is reported early. We utilized a composite anode of graphite and copper for arc evaporation in helium.

scholarly journals Mastering of NIL Stamps with Undercut T-Shaped Features from Single Layer to Multilayer Stamps

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 956
Author(s):  
Philipp Taus ◽  
Adrian Prinz ◽  
Heinz D. Wanzenboeck ◽  
Patrick Schuller ◽  
Anton Tsenov ◽  
...  
Keyword(s):  
Electron Beam Lithography ◽  
Nanoimprint Lithography ◽  
Silicon Oxide ◽  
Three Dimensional ◽  
Single Layer ◽  
Fabrication Technology ◽  
Large Area ◽  
Structural Colors ◽  
Biomimetic Structures ◽  
Morpho Butterfly

Biomimetic structures such as structural colors demand a fabrication technology of complex three-dimensional nanostructures on large areas. Nanoimprint lithography (NIL) is capable of large area replication of three-dimensional structures, but the master stamp fabrication is often a bottleneck. We have demonstrated different approaches allowing for the generation of sophisticated undercut T-shaped masters for NIL replication. With a layer-stack of phase transition material (PTM) on poly-Si, we have demonstrated the successful fabrication of a single layer undercut T-shaped structure. With a multilayer-stack of silicon oxide on silicon, we have shown the successful fabrication of a multilayer undercut T-shaped structures. For patterning optical lithography, electron beam lithography and nanoimprint lithography have been compared and have yielded structures from 10 µm down to 300 nm. The multilayer undercut T-shaped structures closely resemble the geometry of the surface of a Morpho butterfly, and may be used in future to replicate structural colors on artificial surfaces.

scholarly journals Homogeneous 2D and 3D alignment of cardiomyocyte in dilated cardiomyopathy revealed by intravital heart imaging

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kiyoshi Masuyama ◽  
Tomoaki Higo ◽  
Jong-Kook Lee ◽  
Ryohei Matsuura ◽  
Ian Jones ◽  
...  
Keyword(s):  
Heart Failure ◽  
Dilated Cardiomyopathy ◽  
Cardiac Dysfunction ◽  
Three Dimensional ◽  
Single Layer ◽  
Specific Pattern ◽  
Two Dimensional ◽  
Heart Imaging ◽  
Novel Method ◽  
2D And 3D

AbstractIn contrast to hypertrophic cardiomyopathy, there has been reported no specific pattern of cardiomyocyte array in dilated cardiomyopathy (DCM), partially because lack of alignment assessment in a three-dimensional (3D) manner. Here we have established a novel method to evaluate cardiomyocyte alignment in 3D using intravital heart imaging and demonstrated homogeneous alignment in DCM mice. Whilst cardiomyocytes of control mice changed their alignment by every layer in 3D and position twistedly even in a single layer, termed myocyte twist, cardiomyocytes of DCM mice aligned homogeneously both in two-dimensional (2D) and in 3D and lost myocyte twist. Manipulation of cultured cardiomyocyte toward homogeneously aligned increased their contractility, suggesting that homogeneous alignment in DCM mice is due to a sort of alignment remodelling as a way to compensate cardiac dysfunction. Our findings provide the first intravital evidence of cardiomyocyte alignment and will bring new insights into understanding the mechanism of heart failure.

scholarly journals Elastic transformation of histological slices allows precise co-registration with microCT data sets for a refined virtual histology approach

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jonas Albers ◽  
Angelika Svetlove ◽  
Justus Alves ◽  
Alexander Kraupner ◽  
Francesca di Lillo ◽  
...  
Keyword(s):  
Three Dimensional ◽  
High Specificity ◽  
Histopathological Analysis ◽  
Specific Information ◽  
Data Sets ◽  
Virtual Histology ◽  
Novel Approach ◽  
Cell Tissue ◽  
Immuno Histochemistry ◽  
3D Information

AbstractAlthough X-ray based 3D virtual histology is an emerging tool for the analysis of biological tissue, it falls short in terms of specificity when compared to conventional histology. Thus, the aim was to establish a novel approach that combines 3D information provided by microCT with high specificity that only (immuno-)histochemistry can offer. For this purpose, we developed a software frontend, which utilises an elastic transformation technique to accurately co-register various histological and immunohistochemical stainings with free propagation phase contrast synchrotron radiation microCT. We demonstrate that the precision of the overlay of both imaging modalities is significantly improved by performing our elastic registration workflow, as evidenced by calculation of the displacement index. To illustrate the need for an elastic co-registration approach we examined specimens from a mouse model of breast cancer with injected metal-based nanoparticles. Using the elastic transformation pipeline, we were able to co-localise the nanoparticles to specifically stained cells or tissue structures into their three-dimensional anatomical context. Additionally, we performed a semi-automated tissue structure and cell classification. This workflow provides new insights on histopathological analysis by combining CT specific three-dimensional information with cell/tissue specific information provided by classical histology.

scholarly journals Artificial Tumor Microenvironments in Neuroblastoma

Cancers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1629
Author(s):  
Colin H. Quinn ◽  
Andee M. Beierle ◽  
Elizabeth A. Beierle
Keyword(s):  
Extracellular Matrix ◽  
Three Dimensional ◽  
Therapeutic Interventions ◽  
3D Bioprinting ◽  
Culture Studies ◽  
In Vivo Models ◽  
Novel Treatments ◽  
Tumor Microenvironments ◽  
Novel Approach

In the quest to advance neuroblastoma therapeutics, there is a need to have a deeper understanding of the tumor microenvironment (TME). From extracellular matrix proteins to tumor associated macrophages, the TME is a robust and diverse network functioning in symbiosis with the solid tumor. Herein, we review the major components of the TME including the extracellular matrix, cytokines, immune cells, and vasculature that support a more aggressive neuroblastoma phenotype and encumber current therapeutic interventions. Contemporary treatments for neuroblastoma are the result of traditional two-dimensional culture studies and in vivo models that have been translated to clinical trials. These pre-clinical studies are costly, time consuming, and neglect the study of cofounding factors such as the contributions of the TME. Three-dimensional (3D) bioprinting has become a novel approach to studying adult cancers and is just now incorporating portions of the TME and advancing to study pediatric solid. We review the methods of 3D bioprinting, how researchers have included TME pieces into the prints, and highlight present studies using neuroblastoma. Ultimately, incorporating the elements of the TME that affect neuroblastoma responses to therapy will improve the development of innovative and novel treatments. The use of 3D bioprinting to achieve this aim will prove useful in developing optimal therapies for children with neuroblastoma.

scholarly journals Identification of the conserved long non-coding RNAs in myogenesis

BMC Genomics ◽  
2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Anupam Bhattacharya ◽  
Simang Champramary ◽  
Tanya Tripathi ◽  
Debajit Thakur ◽  
Ilya Ioshikhes ◽  
...  
Keyword(s):  
Gene Regulation ◽  
Muscle Development ◽  
Three Dimensional ◽  
C2c12 Cells ◽  
Mouse Muscle ◽  
Rna Molecules ◽  
Expression Of Genes ◽  
Novel Approach ◽  
Non Coding Rna ◽  
Topologically Associated Domains

Abstract Background Our understanding of genome regulation is ever-evolving with the continuous discovery of new modes of gene regulation, and transcriptomic studies of mammalian genomes have revealed the presence of a considerable population of non-coding RNA molecules among the transcripts expressed. One such non-coding RNA molecule is long non-coding RNA (lncRNA). However, the function of lncRNAs in gene regulation is not well understood; moreover, finding conserved lncRNA across species is a challenging task. Therefore, we propose a novel approach to identify conserved lncRNAs and functionally annotate these molecules. Results In this study, we exploited existing myogenic transcriptome data and identified conserved lncRNAs in mice and humans. We identified the lncRNAs expressing differentially between the early and later stages of muscle development. Differential expression of these lncRNAs was confirmed experimentally in cultured mouse muscle C2C12 cells. We utilized the three-dimensional architecture of the genome and identified topologically associated domains for these lncRNAs. Additionally, we correlated the expression of genes in domains for functional annotation of these trans-lncRNAs in myogenesis. Using this approach, we identified conserved lncRNAs in myogenesis and functionally annotated them. Conclusions With this novel approach, we identified the conserved lncRNAs in myogenesis in humans and mice and functionally annotated them. The method identified a large number of lncRNAs are involved in myogenesis. Further studies are required to investigate the reason for the conservation of the lncRNAs in human and mouse while their sequences are dissimilar. Our approach can be used to identify novel lncRNAs conserved in different species and functionally annotated them.

scholarly journals Three-dimensional in situ morphometrics of Mycobacterium tuberculosis infection within lesions by optical mesoscopy and novel acid-fast staining

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Robert J. Francis ◽  
Gillian Robb ◽  
Lee McCann ◽  
Bhagwati Khatri ◽  
James Keeble ◽  
...  
Keyword(s):  
Mycobacterium Tuberculosis ◽  
Three Dimensional ◽  
Large Field ◽  
Staining Procedure ◽  
3D Analysis ◽  
Mycobacterium Tuberculosis Infection ◽  
In Vivo Models ◽  
Novel Approach

AbstractTuberculosis (TB) preclinical testing relies on in vivo models including the mouse aerosol challenge model. The only method of determining colony morphometrics of TB infection in a tissue in situ is two-dimensional (2D) histopathology. 2D measurements consider heterogeneity within a single observable section but not above and below, which could contain critical information. Here we describe a novel approach, using optical clearing and a novel staining procedure with confocal microscopy and mesoscopy, for three-dimensional (3D) measurement of TB infection within lesions at sub-cellular resolution over a large field of view. We show TB morphometrics can be determined within lesion pathology, and differences in infection with different strains of Mycobacterium tuberculosis. Mesoscopy combined with the novel CUBIC Acid-Fast (CAF) staining procedure enables a quantitative approach to measure TB infection and allows 3D analysis of infection, providing a framework which could be used in the analysis of TB infection in situ.

Sign in / Sign up

Export Citation Format

Share Document