scholarly journals Dynamic response signatures of a scaled model platform for floating wind turbines in an ocean wave basin

2015 ◽  
Vol 373 (2035) ◽  
pp. 20140078 ◽  
Author(s):  
V. Jaksic ◽  
R. O'Shea ◽  
P. Cahill ◽  
J. Murphy ◽  
D. P. Mandic ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Control Strategies ◽  
Laser Doppler Vibrometer ◽  
Wind Farms ◽  
Recognition System ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Scaled Model ◽  
Wave Basin ◽  
Output Only

Understanding of dynamic behaviour of offshore wind floating substructures is extremely important in relation to design, operation, maintenance and management of floating wind farms. This paper presents assessment of nonlinear signatures of dynamic responses of a scaled tension-leg platform (TLP) in a wave tank exposed to different regular wave conditions and sea states characterized by the Bretschneider, the Pierson–Moskowitz and the JONSWAP spectra. Dynamic responses of the TLP were monitored at different locations using load cells, a camera-based motion recognition system and a laser Doppler vibrometer. The analysis of variability of the TLP responses and statistical quantification of their linearity or nonlinearity, as non-destructive means of structural monitoring from the output-only condition, remains a challenging problem. In this study, the delay vector variance (DVV) method is used to statistically study the degree of nonlinearity of measured response signals from a TLP. DVV is observed to create a marker estimating the degree to which a change in signal nonlinearity reflects real-time behaviour of the structure and also to establish the sensitivity of the instruments employed to these changes. The findings can be helpful in establishing monitoring strategies and control strategies for undesirable levels or types of dynamic response and can help to better estimate changes in system characteristics over the life cycle of the structure.

scholarly journals Unsupervised Damage Detection for Offshore Jacket Wind Turbine Foundations Based on an Autoencoder Neural Network

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3333
Author(s):  
Maria del Cisne Feijóo ◽  
Yovana Zambrano ◽  
Yolanda Vidal ◽  
Christian Tutivén
Keyword(s):  
Neural Network ◽  
Wind Turbine ◽  
Environmental Conditions ◽  
Wind Farms ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Small Subset ◽  
Scaled Model ◽  
Vibration Data ◽  
Large Water

Structural health monitoring for offshore wind turbine foundations is paramount to the further development of offshore fixed wind farms. At present time there are a limited number of foundation designs, the jacket type being the preferred one in large water depths. In this work, a jacket-type foundation damage diagnosis strategy is stated. Normally, most or all the available data are of regular operation, thus methods that focus on the data leading to failures end up using only a small subset of the available data. Furthermore, when there is no historical precedent of a type of fault, those methods cannot be used. In addition, offshore wind turbines work under a wide variety of environmental conditions and regions of operation involving unknown input excitation given by the wind and waves. Taking into account the aforementioned difficulties, the stated strategy in this work is based on an autoencoder neural network model and its contribution is two-fold: (i) the proposed strategy is based only on healthy data, and (ii) it works under different operating and environmental conditions based only on the output vibration data gathered by accelerometer sensors. The proposed strategy has been tested through experimental laboratory tests on a scaled model.

scholarly journals Seakeeping Tests of a FOWT in Wind and Waves: An Analysis of Dynamic Coupling Effects and Their Impact on the Predictions of Pitch Motion Response

2021 ◽  
Vol 9 (2) ◽  
pp. 179
Author(s):  
Giovanni Amaral ◽  
Pedro Mello ◽  
Lucas do Carmo ◽  
Izabela Alberto ◽  
Edgard Malta ◽  
...  
Keyword(s):  
Frequency Domain ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Dynamic Coupling ◽  
Coupling Effects ◽  
Mooring Lines ◽  
Scaled Model ◽  
Wave Basin ◽  
Domain Models ◽  
Catenary System

The present work highlights some of the dynamic couplings observed in a series of tests performed in a wave basin with a scaled-model of a Floating Offshore Wind Turbine (FOWT) with semi-submersible substructure. The model was moored by means of a conventional chain catenary system and an actively controlled fan was used for emulating the thrust loads during the tests. A set of wave tests was performed for concomitant effects of not aligned wave and wind. The experimental measurements illustrate the main coupling effects involved and how they affect the FOWT motions in waves, especially when the floater presents a non-negligible tilt angle. In addition, a frequency domain numerical analysis was performed in order to evaluate its ability to capture these effects properly. The influence of different modes of fan response, floater trim angles (changeable with ballast compensation) and variations in the mooring stiffness with the offsets were investigated in the analysis. Results attest that significant changes in the FOWT responses may indeed arise from coupling effects, thus indicating that caution must be taken when simplifying the hydrodynamic frequency-domain models often used as a basis for the simulation of FOWTs in waves and in optimization procedures for the design of the floater and mooring lines.

Model Test and Numerical Analysis of an Offshore Bottom Fixed Pentapod Wind Turbine Under Seismic Loads

2016 ◽  
Author(s):  
Wenhua Wang ◽  
Zhen Gao ◽  
Xin Li ◽  
Torgeir Moan ◽  
Bin Wang
Keyword(s):  
Wind Turbine ◽  
Wind Wave ◽  
Seismic Analysis ◽  
Wind Farms ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Structural Dynamic ◽  
Load Conditions

In the last decade the wind energy industry has developed rapidly in China, especially offshore. For a water depth less than 20m, monopile and multi-pile substructures (tripod, pentapod) are applied widely in offshore wind farms. Some wind farms in China are located in high seismicity regions, thus, the earthquake load may become the dominant load for offshore wind turbines. This paper deals with the seismic behavior of an offshore wind turbine (OWT) consisting of the NREL 5MW baseline wind turbine, a pentapod substructure and a pile foundation of a real offshore wind turbine in China. A test model of the OWT is designed based on the hydro-elastic similarity. Test cases of different load combinations are performed with the environmental conditions generated by the Joint Earthquake, Wave and Current Simulation System and the Simple Wind Field Generation System at Dalian University of Technology, China, in order to investigate the structural dynamic responses under different load conditions. In the tests, a circular disk is used to model the rotor-nacelle system, and a force gauge is fixed at the center of the disk to measure the wind forces during the tests. A series of accelerometers are arranged along the model tower and the pentapod piles, and strain gauges glued on the substructure members are intended to measure the structural dynamic responses. A finite element model of the complete wind turbine is also established in order to compare the theoretical results with the test data. The hydro-elastic similarity is validated based on the comparison of the measured dynamic characteristics and the results of the prototype modal analysis. The numerical results agree well with the experimental data. Based on the comparisons of the results, the effect of the wind and sea loads on the structural responses subjected to seismic is demonstrated, especially the influence on the global response of the structure. It is seen that the effect of the combined seismic, wind, wave and current load conditions can not be simply superimposed. Hence the interaction effect in the seismic analysis should be considered when the wind, wave and current loads have a non-negligible effect.

Experimental Investigation on the Dynamic Response of a Three Legged Articulated Type Offshore Wind Tower

2016 ◽  
Author(s):  
Chinsu Mereena Joy ◽  
Anitha Joseph ◽  
Lalu Mangal
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Renewable Energy Sources ◽  
Offshore Structures ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Experimental Investigations ◽  
Offshore Wind Turbine ◽  
Ocean Engineering ◽  
Study Results

Demand for renewable energy sources is rapidly increasing since they are able to replace depleting fossil fuels and their capacity to act as a carbon neutral energy source. A substantial amount of such clean, renewable and reliable energy potential exists in offshore winds. The major engineering challenge in establishing an offshore wind energy facility is the design of a reliable and financially viable offshore support for the wind turbine tower. An economically feasible support for an offshore wind turbine is a compliant platform since it moves with wave forces and offer less resistance to them. Amongst the several compliant type offshore structures, articulated type is an innovative one. It is flexibly linked to the seafloor and can move along with the waves and restoring is achieved by large buoyancy force. This study focuses on the experimental investigations on the dynamic response of a three-legged articulated structure supporting a 5MW wind turbine. The experimental investigations are done on a 1: 60 scaled model in a 4m wide wave flume at the Department of Ocean Engineering, Indian Institute of Technology, Madras. The tests were conducted for regular waves of various wave periods and wave heights and for various orientations of the platform. The dynamic responses are presented in the form of Response Amplitude Operators (RAO). The study results revealed that the proposed articulated structure is technically feasible in supporting an offshore wind turbine because the natural frequencies are away from ocean wave frequencies and the RAOs obtained are relatively small.

scholarly journals Dynamic response mitigation of floating wind turbine platforms using tuned liquid column dampers

2015 ◽  
Vol 373 (2035) ◽  
pp. 20140079 ◽  
Author(s):  
V. Jaksic ◽  
C. S. Wright ◽  
J. Murphy ◽  
C. Afeef ◽  
S. F. Ali ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Dynamic Performance ◽  
Weather Conditions ◽  
Liquid Column ◽  
Dynamic Responses ◽  
Floating Structure ◽  
Energy Devices ◽  
Wave Basin ◽  
Liquid Column Dampers ◽  
Output Only

In this paper, we experimentally study and compare the effects of three combinations of multiple tuned liquid column dampers (MTLCDs) on the dynamic performance of a model floating tension-leg platform (TLP) structure in a wave basin. The structural stability and safety of the floating structure during operation and maintenance is of concern for the performance of a renewable energy device that it might be supporting. The dynamic responses of the structure should thus be limited for these renewable energy devices to perform as intended. This issue is particularly important during the operation of a TLP in extreme weather conditions. Tuned liquid column dampers (TLCDs) can use the power of sloshing water to reduce surge motions of a floating TLP exposed to wind and waves. This paper demonstrates the potential of MTLCDs in reducing dynamic responses of a scaled TLP model through an experimental study. The potential of using output-only statistical markers for monitoring changes in structural conditions is also investigated through the application of a delay vector variance (DVV) marker for different conditions of control for the experiments.

Global Responses and Loads Analysis of a 750-kW Semi-Submersible Floating Offshore Wind Turbine Under Extreme Environmental Conditions

2019 ◽  
Author(s):  
Thanh Dam Pham ◽  
Junbae Kim ◽  
Byoungcheon Seo ◽  
Rupesh Kumar ◽  
Youngjae Yu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Environmental Conditions ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
East Sea ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Scaled Model ◽  
Floating Offshore Wind Turbine ◽  
Extreme Loads

Abstract A pilot floating offshore wind turbine project of Korea was proposed for installing in the East Sea of Korea. The prototype is a semisubmersible platform supporting a 750-kW wind turbine. A scaled model was tested in the basin tank of the University of Ulsan at scale ratio 1:40. The 750-kW floating offshore wind turbine was modeled by using the NREL-FAST code. Numerical results were validated by comparing with those of the test model. This paper analyzes dynamic responses and loads of the wind turbine system under extreme environmental conditions. Extreme environmental conditions based on metocean data of East Sea Korea. Extreme responses and extreme loads are important data for designing the structure of the 750 kW semi-submersible floating offshore wind turbine.

scholarly journals Review of Experimental-Numerical Methodologies and Challenges for Floating Offshore Wind Turbines

2020 ◽  
Vol 19 (3) ◽  
pp. 339-361
Author(s):  
Peng Chen ◽  
Jiahao Chen ◽  
Zhiqiang Hu
Keyword(s):  
Control Strategies ◽  
Full Scale ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Structural Dynamic ◽  
Hybrid Approaches ◽  
Global Dynamic ◽  
Floating Offshore Wind Turbines ◽  
Calibration Methods ◽  
Industrial Projects

Abstract Due to the dissimilar scaling issues, the conventional experimental method of FOWTs can hardly be used directly to validate the full-scale global dynamic responses accurately. Therefore, it is of absolute necessity to find a more accurate, economic and efficient approach, which can be utilized to predict the full-scale global dynamic responses of FOWTs. In this paper, a literature review of experimental-numerical methodologies and challenges for FOWTs is made. Several key challenges in the conventional basin experiment issues are discussed, including scaling issues; coupling effects between aero-hydro and structural dynamic responses; blade pitch control strategies; experimental facilities and calibration methods. Several basin experiments, industrial projects and numerical codes are summarized to demonstrate the progress of hybrid experimental methods. Besides, time delay in hardware-in-the-loop challenges is concluded to emphasize their significant role in real-time hybrid approaches. It is of great use to comprehend these methodologies and challenges, which can help some future researchers to make a footstone for proposing a more efficient and functional hybrid basin experimental and numerical method.

Model Tests on the Long-Term Dynamic Performance of Offshore Wind Turbines Founded on Monopiles in Sand

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Zhen Guo ◽  
Luqing Yu ◽  
Lizhong Wang ◽  
S. Bhattacharya ◽  
G. Nikitas ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Wind Turbines ◽  
Model Tests ◽  
Offshore Wind ◽  
Frequency Change ◽  
Test Results ◽  
Scaled Model ◽  
Structural Dynamic ◽  
Offshore Wind Turbines

The dynamic response of the supporting structure is critical for the in-service stability and safety of offshore wind turbines (OWTs). The aim of this paper is to first illustrate the complexity of environmental loads acting on an OWT and reveal the significance of its structural dynamic response for the OWT safety. Second, it is aimed to investigate the long-term performance of the OWT founded on a monopile in dense sand. Therefore, a series of well-scaled model tests have been carried out, in which an innovative balance gear system was proposed and used to apply different types of dynamic loadings on a model OWT. Test results indicated that the natural frequency of the OWT in sand would increase as the number of applied cyclic loading went up, but the increasing rate of the frequency gradually decreases with the strain accumulation of soil around the monopile. This kind of the frequency change of OWT is thought to be dependent on the way how the OWT is cyclically loaded and the shear strain level of soil in the area adjacent to the pile foundation. In this paper, all test results were plotted in a nondimensional manner in order to be scaled up to predict the consequences for prototype OWT in sandy seabed.

Dynamic Responses of a Four-Span Continuous Plate Structure Subjected to Moving Cars With Time-Varying Speeds

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Jing Yang ◽  
Huajiang Ouyang ◽  
Dan Stancioiu ◽  
Shancheng Cao ◽  
Xuhui He
Keyword(s):  
Theoretical Model ◽  
Dynamic Response ◽  
Laser Doppler Vibrometer ◽  
Dynamic Responses ◽  
Fe Model ◽  
Structural Dynamic ◽  
Plate Structure ◽  
In Series ◽  
Displacement Transducers ◽  
Continuous Plate

This paper presents an experimental and theoretical study of vibration of a four-span continuous plate with two rails on top and four extra supports excited by one or two moving model cars, which is meant to represent vehicle–track–bridge dynamic interaction. Measured natural frequencies of the plate structure are used to update the finite element (FE) model of the structure. Four laser displacement transducers are placed on the ground to measure the displacements of the plate. A laser-Doppler vibrometer is used to measure the real-time speed of the moving cars, which reveals that the speeds decrease with time at a small and almost constant deceleration which can affect the structural dynamic response. A fascinating experiment is the use of two cars connected in series, which is very rare and has never been done on a multispan structure. Vibration of the plate structure excited by two moving cars separated at a distance is also measured and exhibits interesting dynamic behavior too. A theoretical model of the whole structure is constructed and an iterative method is developed to determine the dynamic response. The numerical and the experimental results are found to agree very well, in particular when deceleration is considered in the theoretical model.

Sign in / Sign up

Export Citation Format

Share Document