scholarly journals Finite-element modelling of elastic wave propagation and scattering within heterogeneous media

Author(s):  
A. Van Pamel ◽  
G. Sha ◽  
S. I. Rokhlin ◽  
M. J. S. Lowe

The scattering treated here arises when elastic waves propagate within a heterogeneous medium defined by random spatial fluctuation of its elastic properties. Whereas classical analytical studies are based on lower-order scattering assumptions, numerical methods conversely present no such limitations by inherently incorporating multiple scattering. Until now, studies have typically been limited to two or one dimension, however, owing to computational constraints. This article seizes recent advances to realize a finite-element formulation that solves the three-dimensional elastodynamic scattering problem. The developed methodology enables the fundamental behaviour of scattering in terms of attenuation and dispersion to be studied. In particular, the example of elastic waves propagating within polycrystalline materials is adopted, using Voronoi tessellations to randomly generate representative models. The numerically observed scattering is compared against entirely independent but well-established analytical scattering theory. The quantitative agreement is found to be excellent across previously unvisited scattering regimes; it is believed that this is the first quantitative validation of its kind which provides significant support towards the existence of the transitional scattering regime and facilitates future deployment of numerical methods for these problems.

Author(s):  
Kaliappan Jayabal ◽  
Andreas Menzel

Hybrid finite element formulations in combination with Voronoi-cell-based discretisation methods can efficiently be used to model the behaviour of polycrystalline materials. Randomly generated three-dimensional Voronoi polygonal elements with varying numbers of surfaces and corners in general better approximate the geometry of polycrystalline microor rather grain-structures than the standard tetrahedral and hexahedral finite elements. In this work, the application of a polygonal finite element formulation to three-dimensional elastomechanical problems is elaborated with special emphasis on the numerical implementation of the method and the construction of the element stiffness matrix. A specific property of Voronoi-based discretisations in combination with a hybrid finite element approach is investigated. The applicability of the framework established is demonstrated by means of representative numerical examples.


2012 ◽  
Vol 20 (04) ◽  
pp. 1250014 ◽  
Author(s):  
JIAN-BAO LI ◽  
YUE-SHENG WANG ◽  
CHUANZENG ZHANG

Dispersive properties of elastic waves in a periodic composite with an array of fluid-filled holes are studied in this paper. A finite element method taking into account of the fluid–solid interaction is developed to calculate the dispersion curves. The finite element formulation is presented for one unit cell by taking advantage of the periodicity of the structures and the Bloch theorem. After dividing the equations in the real and imaginary parts, the numerical computation is performed by using the standard finite element code ABAQUS. As numerical examples, some typical two- and three-dimensional systems with circular or spherical holes filled with air, water or mercury are considered in detail. The method can yield precise results with fast convergence for all cases from very low-density fluids to very high-density fluids.


MRS Bulletin ◽  
2008 ◽  
Vol 33 (6) ◽  
pp. 597-602 ◽  
Author(s):  
G. Spanos ◽  
D.J. Rowenhorst ◽  
A.C. Lewis ◽  
A.B. Geltmacher

AbstractThis article first provides a brief review of the status of the subfield of three-dimensional (3D) materials analyses that combine serial sectioning, electron backscatter diffraction (EBSD), and finite element modeling (FEM) of materials microstructures, with emphasis on initial investigations and how they led to the current state of this research area. The discussions focus on studies of the mechanical properties of polycrystalline materials where 3D reconstructions of the microstructure—including crystallographic orientation information—are used as input into image-based 3D FEM simulations. The authors' recent work on a β-stabilized Ti alloy is utilized for specific examples to illustrate the capabilities of these experimental and modeling techniques, the challenges and the solutions associated with these methods, and the types of results and analyses that can be obtained by the close integration of experiments and simulations.


Sign in / Sign up

Export Citation Format

Share Document