scholarly journals On a possible methodology for identifying the initiation of damage of a class of polymeric materials

2016 ◽  
Vol 472 (2192) ◽  
pp. 20160231 ◽  
Author(s):  
P. Alagappan ◽  
K. Kannan ◽  
K. R. Rajagopal
Keyword(s):  
Material Properties ◽  
Polymeric Materials ◽  
Damage Parameter ◽  
The Body ◽  
Experimental Results ◽  
Reference Configuration ◽  
Damage Criterion ◽  
Current Configuration ◽  
Polymeric Solid

In this paper, we provide a possible methodology for identifying the initiation of damage in a class of polymeric solids. Unlike most approaches to damage that introduce a damage parameter, which might be a scalar, vector or tensor, that depends on the stress or strain (that requires knowledge of an appropriate reference configuration in which the body was stress free and/or without any strain), we exploit knowledge of the fact that damage is invariably a consequence of the inhomogeneity of the body that makes the body locally ‘weak’ and the fact that the material properties of a body invariably depend on the density, among other variables that can be defined in the current configuration, of the body. This allows us to use density, for a class of polymeric materials, as a means to identify incipient damage in the body. The calculations that are carried out for the biaxial stretch of an inhomogeneous multi-network polymeric solid bears out the appropriateness of the thesis that the density of the body can be used to forecast the occurrence of damage, with the predictions of the theory agreeing well with experimental results. The study also suggests a meaningful damage criterion for the class of bodies being considered.

Prediction of the Onset of Failure in Elastomeric Solids with Weld Lines being Represented as Localized Regions of Lower Density

2021 ◽  
pp. 1-41
Author(s):  
Chellappa Karunakaran ◽  
Alagappan Ponnalagu ◽  
Krishna Kannan ◽  
Kumbakonam Rajagopal
Keyword(s):  
Stress Concentrator ◽  
Weld Line ◽  
The Body ◽  
Reference Configuration ◽  
Line Defect ◽  
Stress Concentrators ◽  
Current Configuration

Abstract We study the initiation of damage in a polymeric body in which there is a line defect due to the formation of a “weld line” that occurs when two polymer streams join together and then solidify. We show that damage initiates in the region of weakness, namely the “weld line” based on a criterion for damage that was developed earlier in [1]. We also show that if there are other stress concentrators also additionally present, such as a hole, then there is a competition between the stresses induced due to the weakness and the stress as a consequence of the stress concentrator (in this instance a hole). This study adds more credence to the criterion for the initiation of damage that is based completely on knowledge of information at the current configuration of the body, that is, the criterion for damage is not based on the value of quantities that also need information based on a reference configuration such as the stress or strain.

Determination of Charge Coefficient of Piezoelectric Films Using a Combined Finite Element Model and Dynamic Loading Technique

2020 ◽  
Vol 835 ◽  
pp. 229-242
Author(s):  
Oboso P. Bernard ◽  
Nagih M. Shaalan ◽  
Mohab Hossam ◽  
Mohsen A. Hassan
Keyword(s):  
Finite Element ◽  
Dynamic Loading ◽  
Material Properties ◽  
Accurate Determination ◽  
Substrate Material ◽  
Experimental Results ◽  
Piezoelectric Composite ◽  
Piezoelectric Film ◽  
Piezoelectric Charge

Accurate determination of piezoelectric properties such as piezoelectric charge coefficients (d33) is an essential step in the design process of sensors and actuators using piezoelectric effect. In this study, a cost-effective and accurate method based on dynamic loading technique was proposed to determine the piezoelectric charge coefficient d33. Finite element analysis (FEA) model was developed in order to estimate d33 and validate the obtained values with experimental results. The experiment was conducted on a piezoelectric disc with a known d33 value. The effect of measuring boundary conditions, substrate material properties and specimen geometry on measured d33 value were conducted. The experimental results reveal that the determined d33 coefficient by this technique is accurate as it falls within the manufactures tolerance specifications of PZT-5A piezoelectric film d33. Further, obtained simulation results on fibre reinforced and particle reinforced piezoelectric composite were found to be similar to those that have been obtained using more advanced techniques. FE-results showed that the measured d33 coefficients depend on measuring boundary condition, piezoelectric film thickness, and substrate material properties. This method was proved to be suitable for determination of d33 coefficient effectively for piezoelectric samples of any arbitrary geometry without compromising on the accuracy of measured d33.

scholarly journals Electrochemically Produced Copolymers of Pyrrole and Its Derivatives: A Plentitude of Material Properties Using “Simple” Heterocyclic Co-Monomers

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 281
Author(s):  
Tomasz Jarosz ◽  
Przemyslaw Ledwon
Keyword(s):  
Biological Activity ◽  
Material Properties ◽  
Building Block ◽  
Conjugated Polymer ◽  
Chemical Structure ◽  
Heterocyclic System ◽  
Repeat Unit ◽  
Polymeric Materials ◽  
Pyrrole Derivatives ◽  
Pyrrole Monomer

Polypyrrole is a classical, well-known conjugated polymer that is produced from a simple heterocyclic system. Numerous pyrrole derivatives exhibit biological activity, and the repeat unit is a common building block present in the chemical structure of many polymeric materials, finding wide application, primarily in optoelectronics and sensing. In this work, we focus on the variety of copolymers and their material properties that can be produced electrochemically, even though all these systems are obtained from mixtures of the “simple” pyrrole monomer and its derivatives with different conjugated and non-conjugated species.

scholarly journals DESIGNING A TEMPORARY COLD PROTECTIVE GEAR CONSTRUCTED BY FOLDING NEWSPRINT PAPER CONSIDERING HEAT-RETAINING PROPERTY AND RIGIDITY

2021 ◽  
Vol 1 ◽  
pp. 1123-1132
Author(s):  
Tatsuya Oda ◽  
Shigeru Wesugi
Keyword(s):  
Natural Disaster ◽  
Cold Season ◽  
Apex Angle ◽  
The Body ◽  
Experimental Results ◽  
Protective Gear ◽  
Significant Difference ◽  
Body Shapes

AbstractDuring the cold season, the cold protective products are often short during evacuation life after a natural disaster. If evacuees can make and wear simple cold protective gears by using materials obtainable on site, it will reduce the burden on the evacuees in emergent situation. Therefore, we investigated the structure constructed by folding newsprint paper, which can improve the heat retention effect and be applied to various body shapes. Focusing on the glide reflection structure repeating a smaller chamber, the basic size was determined by experiments with reference to the accordion shape, and the experimental results indicated that the heat retention effect was significantly greater than that of a mere air layer and those of ordinary fabrics. Next, it was found that the apex angle of structure had no significant difference in the heat retention effect. Then, the dimensions of the structure were determined to maintain the air layer under the pressure of the clothes by simulation of structural analyses. Finally, we made a temporary cold protective gear that can practically cover the trunk of the body and found that the heat retention effect was significantly higher than that of unprocessed newsprint and that of accordion shape.

Self Healing of Epoxy Composite for Aircraft's Structural Applications

2008 ◽  
Vol 136 ◽  
pp. 39-44 ◽  
Author(s):  
Willy C.K. Tan ◽  
J.C. Kiew ◽  
K.Y. Siow ◽  
Z.R. Sim ◽  
H.S. Poh ◽  
...  
Keyword(s):  
Composite Structures ◽  
Polymeric Materials ◽  
Hollow Fibre ◽  
The Body ◽  
Strength Increase ◽  
Self Healing ◽  
Structural Applications ◽  
Self Repair ◽  
Repair Systems ◽  
Point Bend

When one cut himself, it's amazing to watch how quickly the body acts to mend the wound. Immediately, the body works to pull the skin around the cut back together. The concept of repair by bleeding of enclosed functional agents serves as the biomimetric inspiration of synthetic self repair systems. Such synthetic self repair systems are based on advancement in polymeric materials; the process of human thrombosis is the inspiration for the application of self healing fibres within the composite materials. Preliminary results based on flexural 3 point bend test on prepared samples have shown the healed hollow fibre laminate has a healed strength increase of 47.6% compared to the damaged baseline laminate. These results gave us confidence that there is a great potential to adopt such self healing mechanism on actual composite parts like in aircraft’s composite structures.

scholarly journals Mechanics of the small punch test: a review and qualification of additive manufacturing materials

2021 ◽  
Vol 56 (18) ◽  
pp. 10707-10744
Author(s):  
Jonathan Torres ◽  
Ali P. Gordon
Keyword(s):  
Additive Manufacturing ◽  
Material Properties ◽  
Materials Science ◽  
Contemporary Literature ◽  
The Body ◽  
Small Punch Test ◽  
Small Punch ◽  
Punch Test ◽  
Testing Data ◽  
The Relationship

AbstractThe small punch test (SPT) was developed for situations where source material is scarce, costly or otherwise difficult to acquire, and has been used for assessing components with variable, location-dependent material properties. Although lacking standardization, the SPT has been employed to assess material properties and verified using traditional testing. Several methods exist for equating SPT results with traditional stress–strain data. There are, however, areas of weakness, such as fracture and fatigue approaches. This document outlines the history and methodologies of SPT, reviewing the body of contemporary literature and presenting relevant findings and formulations for correlating SPT results with conventional tests. Analysis of literature is extended to evaluating the suitability of the SPT for use with additively manufactured (AM) materials. The suitability of this approach is shown through a parametric study using an approximation of the SPT via FEA, varying material properties as would be seen with varying AM process parameters. Equations describing the relationship between SPT results and conventional testing data are presented. Correlation constants dictating these relationships are determined using an accumulation of data from the literature reviewed here, along with novel experimental data. This includes AM materials to assess the fit of these and provide context for a wider view of the methodology and its interest to materials science and additive manufacturing. A case is made for the continued development of the small punch test, identifying strengths and knowledge gaps, showing need for standardization of this simple yet highly versatile method for expediting studies of material properties and optimization.

Effect of Ramp Angle on the Anti-Loosening Ability of Wedge Self-Locking Nuts Under Vibration

2018 ◽  
Vol 140 (7) ◽  
Author(s):  
Jianhua Liu ◽  
Hao Gong ◽  
Xiaoyu Ding
Keyword(s):  
Finite Element ◽  
Numerical Simulations ◽  
Production Technology ◽  
Material Properties ◽  
Threshold Value ◽  
Commercial Production ◽  
Experimental Results ◽  
Fe Method ◽  
Transversal Vibration

Recently, the wedge self-locking nut, a special anti-loosening product, is receiving more attention because of its excellent reliability in preventing loosening failure under vibration conditions. The key characteristic of a wedge self-locking nut is the special wedge ramp at the root of the thread. In this work, the effect of ramp angle on the anti-loosening ability of wedge self-locking nuts was studied systematically based on numerical simulations and experiments. Wedge self-locking nuts with nine ramp angles (10 deg, 15 deg, 20 deg, 25 deg, 30 deg, 35 deg, 40 deg, 45 deg, and 50 deg) were modeled using a finite element (FE) method, and manufactured using commercial production technology. Their anti-loosening abilities under transversal vibration conditions were analyzed based on numerical and experimental results. It was found that there is a threshold value of the initial preload below which the wedge self-locking nuts would lose their anti-loosening ability. This threshold value of initial preload was then proposed for use as a criterion to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively and to determine the optimal ramp angle. Based on this criterion, it was demonstrated, numerically and experimentally, that a 30 deg wedge ramp resulted in the best anti-loosening ability among nine ramp angles studied. The significance of this study is that it provides an effective method to evaluate the anti-loosening ability of wedge self-locking nuts quantitatively, and determined the optimal ramp angle in terms of anti-loosening ability. The proposed method can also be used to optimize other parameters, such as the material properties and other dimensions, to guarantee the best anti-loosening ability of wedge self-locking nuts.

Pressure Distribution in the Calendering of Plastic Materials

1951 ◽  
Vol 18 (1) ◽  
pp. 101-106
Author(s):  
J. T. Bergen ◽  
G. W. Scott
Keyword(s):  
Pressure Distribution ◽  
Viscous Liquid ◽  
High Speed ◽  
Plastic Material ◽  
The Body ◽  
Experimental Results ◽  
Distribution Characteristics ◽  
Flow Properties ◽  
Pressure Sensitive ◽  
Plastic Materials

Abstract In the calendering, or rolling, of a plastic material in to sheet form by passing it between parallel rolls, hydrostatic pressure is exerted against the surface of the roll throughout the region of contact with the plastic mass. This pressure has been measured by means of a pressure-sensitive cylinder, inserted in the body of a 10-in-diam roll, together with high-speed oscillographic technique. The materials which were calendered consisted of a resin which exhibited flow properties characteristic of a viscous liquid, and several filled plastic compositions of commercial interest. Pressure maxima ranging up to 8000 psi were observed. Comparison of experimental results with theoretical expressions for pressure distribution, as given by several authors, indicates that the equation derived by Gaskell quite satisfactorily predicts the results for the case of the viscous liquid. The commercial plastics were found to exhibit pressure-distribution characteristics which were perceptibly different from those of the viscous liquid. Certain limitations of Gaskell’s treatment of nonviscous materials prevent its application to these experimental results.

High Efficiency Molding by Real-Time Control of Distance Between Nozzle and Melt Pool in Directed Energy Deposition Process

2020 ◽  
Author(s):  
Kengo Aizawa ◽  
Masahiro Ueda ◽  
Teppei Shimada ◽  
Hideki Aoyama ◽  
Kazuo Yamazaki
Keyword(s):  
Additive Manufacturing ◽  
Real Time ◽  
Material Properties ◽  
High Efficiency ◽  
Dimensional Accuracy ◽  
Deposition Process ◽  
Deposition Efficiency ◽  
Experimental Results ◽  
Real Time Control ◽  
Molding Process

Abstract Laser metal deposition (LMD) is an additive manufacturing technique, whose performance can be influenced by a considerable number of factors and parameters. Typically, a powder is carried by an inert gas and sprayed by a nozzle, with a coaxial laser beam passing through the nozzle and overlapping the powder flow, thereby generating a molten material pool on a substrate. Monitoring the evolution of this process allows for a better comprehension and control of the process, thereby enhancing the deposition quality. As the metal additive manufacturing mechanism has not yet been elucidated, it is not clear how process parameters affect material properties, molding accuracy, and molding efficiency. When cladding is performed under uncertain conditions, a molded part with poor material properties and dimensional accuracy is created. In this paper, we propose a method for high efficiency molding by controlling the distance between the head nozzle and the molten pool in real time. The distance is identified by an originally developed sensor based on a triangulation method. According to the distance, the head nozzle is automatically controlled into the optimum position. As a result, an ideal molding process can be generated, so that high efficiency molding and high-quality material properties can be obtained. Experimental results show that continuing deposition at the optimum distance assists in achieving deposition efficiency and dimensional accuracy. According to the specific experimental results of this method, the modeling efficiency was increased by 27% compared to the method without correction, and the modeling was successful with an error within 1 mm.

A Note on the Resistance of Bodies of Revolution and Ship Forms

1974 ◽  
Vol 18 (03) ◽  
pp. 153-168
Author(s):  
N. Matheson ◽  
P. N. Joubert
Keyword(s):  
Boundary Layer ◽  
Reasonable Agreement ◽  
The Body ◽  
Experimental Results ◽  
Body Of Revolution ◽  
Bodies Of Revolution ◽  
Boundary Layer Development ◽  
Layer Development

A simple so-called 'equivalent' body of revolution is proposed for reflex ship forms in an attempt to simplify calculation of the boundary layer over a ship's hull when there is no wavemaking. How­ever, exhaustive testing of one body of revolution did not produce a favorable comparison with re­sults for the corresponding reflex model. Gadd's recently proposed theory was used to calculate the boundary-layer development over the body of revolution. Reasonable agreement was obtained between the calculated and experimental results.

Sign in / Sign up

Export Citation Format

Share Document