scholarly journals Effect of B-site Co substitution on the structure and magnetic properties of nanocrystalline neodymium orthoferrite synthesized by auto-combustion

2021 ◽  
Vol 8 (2) ◽  
pp. 201883
Author(s):  
Edwin Akongnwi Nforna ◽  
Patrice Kenfack Tsobnang ◽  
Roussin Lontio Fomekong ◽  
Hypolite Mathias Kamta Tedjieukeng ◽  
John Ngolui Lambi ◽  
...  
Keyword(s):  
Data Storage ◽  
Coercive Field ◽  
Magnetic Moments ◽  
Logic Gates ◽  
Weak Ferromagnetism ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cobalt Substitution ◽  
Auto Combustion ◽  
Potential Applications

Samples of cobalt-doped neodymium orthoferrite compounds, NdCo x Fe 1−x O 3 (0.0 ≤ x ≤ 0.5) were synthesized via glycine auto-combustion between 250 and 300°C and calcined at 500°C for 2 h. X-ray diffraction showed that all compounds had an orthorhombic perovskite structure with space group Pbnm. Increasing cobalt doping gradually reduced the lattice parameters and contracted the unit cell volume. Both X-ray diffraction and scanning electron microscopy showed that the particles were spherical and in the nano-sized range (19–52 nm) with pores between grains. Vibrating sample magnetometry at room temperature indicated that NdFeO 3 has a high coercive field (1950 Oe) and cobalt substitution for iron led to a decrease in the coercive field, saturation and remanent magnetization, which was as a result of decreased magnetic moments in the crystal and reduced canting of the FeO 6 octahedra. The increase in magnetization and coercive fields with increase of Co was connected to the microstructure (bond lengths and angles, defects, pores, grain boundaries) and crystallite size. The compounds NdCo x Fe 1−x O 3 show antiferromagnetism with weak ferromagnetism due to uncompensated non-collinear moments. These compounds could serve as prototypes for tuning the properties of magnetic materials (ferromagnetic and antiferromagnetic) with potential applications in data storage, logic gates, switches and sensors.

scholarly journals Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 274-281 ◽  
Author(s):  
S. S. Satpute ◽  
S. R. Wadgane ◽  
S. R. Kadam ◽  
D. R. Mane ◽  
R. H. Kadam
Keyword(s):  
Electron Microscopy ◽  
Sol Gel ◽  
Electrical Characterization ◽  
Combustion Method ◽  
Hexagonal Structure ◽  
Strontium Hexaferrite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
Auto Combustion

Abstract Y3+ substituted strontium hexaferrites having chemical composition SrYxFe12-xO19 (x= 0.0, 0.5, 1.0, 1.5) were successfully synthesized by sol-gel auto-combustion method. The structural and morphological studies of prepared samples were investigated by using X-ray diffraction technique, energy dispersive X-ray spectroscopy, field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy. The X-ray diffraction pattern confirmed the single-phase hexagonal structure of yttrium substituted strontium ferrite and the lattice parameters a and c increased with the substitution of Y3+ ions. The crystallite size also varied with x content from 60 to 80 nm. The morphology was studied by FE-SEM, and the grain size of nanoparticles ranged from 44 to 130 nm. The magnetic properties were investigated by using vibrating sample magnetometer. The value of saturation magnetization decreased from 49.60 to 35.40 emu/g. The dielectric constant decreased non-linearly whereas the electrical dc resistivity increased with the yttrium concentration in strontium hexaferrite.

scholarly journals Laser-Induced Deposition of Plasmonic Ag and Pt Nanoparticles, and Periodic Arrays

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 10
Author(s):  
Daria V. Mamonova ◽  
Anna A. Vasileva ◽  
Yuri V. Petrov ◽  
Denis V. Danilov ◽  
Ilya E. Kolesnikov ◽  
...  
Keyword(s):  
Substrate Surface ◽  
Pt Nanoparticles ◽  
Single Step ◽  
X Ray Diffraction ◽  
Ag Nps ◽  
X Ray ◽  
Periodic Arrays ◽  
Potential Applications ◽  
Surface Decoration ◽  
Wide Potential

Surfaces functionalized with metal nanoparticles (NPs) are of great interest due to their wide potential applications in sensing, biomedicine, nanophotonics, etc. However, the precisely controllable decoration with plasmonic nanoparticles requires sophisticated techniques that are often multistep and complex. Here, we present a laser-induced deposition (LID) approach allowing for single-step surface decoration with NPs of controllable composition, morphology, and spatial distribution. The formation of Ag, Pt, and mixed Ag-Pt nanoparticles on a substrate surface was successfully demonstrated as a result of the LID process from commercially available precursors. The deposited nanoparticles were characterized with SEM, TEM, EDX, X-ray diffraction, and UV-VIS absorption spectroscopy, which confirmed the formation of crystalline nanoparticles of Pt (3–5 nm) and Ag (ca. 100 nm) with plasmonic properties. The advantageous features of the LID process allow us to demonstrate the spatially selective deposition of plasmonic NPs in a laser interference pattern, and thereby, the formation of periodic arrays of Ag NPs forming diffraction grating

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

scholarly journals Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yan Ye ◽  
Da Yin ◽  
Bin Wang ◽  
Qingwen Zhang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Aerogels ◽  
Transmission Electron ◽  
Potential Applications ◽  
Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Hydrothermal synthesis, crystal structure and properties of a two-dimensional uranyl coordination polymer based on a flexible zwitterionic ligand

2018 ◽  
Vol 74 (3) ◽  
pp. 366-371 ◽  
Author(s):  
Wen Cui ◽  
Ruyu Wang ◽  
Xi Shu ◽  
Yu Fan ◽  
Yang Liu ◽  
...  
Keyword(s):  
Coordination Polymer ◽  
Hydrothermal Reaction ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
Uranyl Compounds ◽  
X Ray ◽  
Potential Applications ◽  
Ft Ir ◽  
Fuel Reprocessing ◽  
Ft Ir Spectroscopy

The interaction between the uranyl cation, (UO2)2+, and organic species is of interest due to the potential applications of the resulting compounds with regard to nuclear waste disposal and nuclear fuel reprocessing. The hydrothermal reaction of various uranyl compounds with flexible zwitterionic 1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate) dihydrochloride (Bpmb·2HCl) in deionized water containing drops of H2SO4resulted in the formation of a novel two-dimensional uranyl coordination polymer, namely poly[tetraoxido{μ2-1,1′-[1,4-phenylenebis(methylene)]bis(pyridin-1-ium-4-carboxylate)}di-μ3-sulfato-diuranium(VI)], [(UO2)2(SO4)2(C20H16N2O4)]n, (1). Single-crystal X-ray diffraction reveals that this coordination polymer exhibits a layered arrangement and the (UO2)2+centre is coordinated by five equatorial O atoms. The structure was further characterized by FT–IR spectroscopy, powder X-ray diffraction (PXRD) and thermogravimetric analysis (TGA). The polymer shows high thermal stability up to 696 K. Furthermore, the photoluminescence properties of (1) has also been studied, showing it to exhibit a typical uranyl fluorescence.

Coating thickness determination in highly absorbent core–shell systems

2012 ◽  
Vol 45 (5) ◽  
pp. 906-913 ◽  
Author(s):  
Herve Palancher ◽  
Anne Bonnin ◽  
Veijo Honkimäki ◽  
Heikki Suhonen ◽  
Peter Cloetens ◽  
...  
Keyword(s):  
Coating Thickness ◽  
Protective Layer ◽  
Test Sample ◽  
High Energy ◽  
Core Shell ◽  
Single Shot ◽  
X Ray Diffraction ◽  
X Ray ◽  
Alloy Particles ◽  
Potential Applications

This article describes a single-shot methodology to derive an average coating thickness in multi-particle core–shell systems exhibiting high X-ray absorption. Powder composed of U–Mo alloy particles surrounded by a micrometre-thick UO2protective layer has been used as a test sample. Combining high-energy X-ray diffraction and laser granulometry, the average shell thickness could be accurately characterized. These results have been validated by additional measurements on single particles by two techniques: X-ray nanotomography and high-energy X-ray diffraction. The presented single-shot approach gives rise to many potential applications on core–shell systems and in particular on as-fabricated heterogeneous nuclear fuels.

W-Doped VO2 (M) with Tunable Phase Transition Temperature

2013 ◽  
Vol 320 ◽  
pp. 483-487 ◽  
Author(s):  
Ming Li ◽  
Deng Bing Li ◽  
Jing Pan ◽  
Guang Hai Li
Keyword(s):  
Electron Microscopy ◽  
Phase Transition ◽  
Transition Temperature ◽  
Phase Transition Temperature ◽  
Variable Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Infrared Transmittance ◽  
Transmission Electron ◽  
Potential Applications

W-doped VO2 (B) nanoneedles were successfully synthesized by solgel combing with hydrothermal treatment, in which the polyethylene glycol (PEG) was used as both surfactant and reducing. The metastable VO2 (B) was completely transformed to thermochromic VO2 (M) after annealing at high purity N2 atmosphere. The DSC results exhibit a strong crystallographic transition, and the phase transition temperature of VO2 (M) can be reduced to about 38 °C by W-doping. Field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) were used to characterize the morphology and crystalline structure of the samples. The variable-temperature infrared transmittance spectra of VO2 (M) demonstrate their potential applications in energy saving field.

A new twofold interpenetrated two-dimensional cadmium(II) coordination polymer constructed from 2,2′-(benzene-1,4-dicarboxamido)dipropionate

2018 ◽  
Vol 74 (11) ◽  
pp. 1434-1439
Author(s):  
Hong-Tao Zhang ◽  
Xiao-Long Wang
Keyword(s):  
Coordination Polymer ◽  
Coordination Polymers ◽  
Self Assembly ◽  
Fluorescence Emission ◽  
Functional Materials ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carboxylate Groups ◽  
Potential Applications

In recent years, much initial interest and enthusiasm has focused on the self-assembly of coordination polymers due to the aesthetics of their crystalline architectures and their potential applications as new functional materials. As part of an exploration of chiral coordination polymers, a new twofold interpenetrated two-dimensional (2D) coordination polymer, namely, poly[[tetraaquabis[μ3-(2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionato-κ5 O,O′:O′′,O′′′:O′′]dicadmium(II)] trihydrate], {[Cd2(C14H14N2O6)2(H2O)4]·3H2O} n , has been synthesized by the reaction of Cd(CH3COO)2·2H2O with the designed ligand (2R,2′R)-2,2′-(benzene-1,4-dicarboxamido)dipropionic acid (H2 L). The compound has been structurally characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction and single-crystal X-ray diffraction analysis. In the crystal structure, each CdII cation binds to three carboxylate groups from two crystallographically independent L 2− dianions. Four carboxylate groups link two crystallographically independent cadmium cations into a 4,4-connected secondary building unit (SBU). The resulting SBUs are extended into a two-dimensional folding sheet via the terephthalamide moiety of the ligand as a spacer, which can be simplified as a (4,4)-connected 4,4L15 net with the point symbol (3.53.62)(32.52.62). In the lattice, two independent folding sheets interpenetrate each other to yield a double-sheet layer. The resulting 2D layers pack in parallel arrays through intermolecular hydrogen bonds and interlayer π–π interactions. The thermal stability and photoluminescence properties of the title compound have been investigated and it exhibits an enhanced fluorescence emission and a longer lifetime compared with free H2 L.

scholarly journals Synthesis, Characterization, and NH3 Sensing Properties of (Zn0.7 Mn0.3-x Cex Fe2O4) Nano-Ferrite

2021 ◽  
Vol 2114 (1) ◽  
pp. 012040
Author(s):  
Laith Saheb ◽  
Tagreed M. Al-Saadi
Keyword(s):  
Recovery Time ◽  
Particle Distribution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Properties ◽  
Auto Combustion ◽  
Cubic Structure ◽  
Sensing Characteristics ◽  
Combustion Technique ◽  
Higher Sensitivity

Abstract This study includes the preparation of novel nano ferrite (Zn0.7 Mn0.3-x Cex Fe2O4) by using the auto combustion technique. For the following molar values, the percentage x was calculated: 0.0, 0.05, 0.1, 0.15, 0.2, 0.25, and 0.3. The nano-ferrite was calcined for 2 hours at 500°C. The energy dispersive x-ray spectroscopy (EDX), X-ray diffraction (XRD) and field emission scanning electron microscopy FE-SEM was used to examine structural, morphological, and sensing properties. The spinel cubic structure was revealed by XRD findings. The particle distribution was shown to contain voids by FE-SEM. The testing of sensing characteristics to NH3 gas indicated that the synthesized nano-ferrite has a small response time ranging from (15.3-25.2) s as well as a small recovery time between (36-58.5) s, also has a higher sensitivity of about 72.23%.

Sign in / Sign up

Export Citation Format

Share Document