scholarly journals The inhibitory effect of carboxyl-terminated polyamidoamine dendrimers on dentine host-derived matrix metalloproteinases in vitro in an etch-and-rinse adhesive system

2019 ◽  
Vol 6 (10) ◽  
pp. 182104
Author(s):  
Qian Wu ◽  
Tiantian Shan ◽  
Manduo Zhao ◽  
Sui Mai ◽  
Lisha Gu
Keyword(s):  
Matrix Metalloproteinases ◽  
Organic Matrix ◽  
Adhesive System ◽  
Collagen Fibrils ◽  
Fourth Generation ◽  
Etch And Rinse ◽  
Polyamidoamine Dendrimers ◽  
Pre Treatment

The biomimetic remineralization of collagen fibrils has increased interest in restoring the demineralized dentine generated by dental caries. Carboxyl-terminated polyamidoamine dendrimers (PAMAM-COOH), hyperbranched polymeric macromolecules, can act as non-collagenous proteins to induce biomimetic remineralization on a dentine organic matrix. However, in vivo remineralization is an extremely time-consuming process; before complete remineralization, demineralized dentine collagen fibrils are susceptible to degradation by host-derived matrix metalloproteinases (MMPs). Therefore, we examined the effect of fourth-generation PAMAM-COOH (G4-PAMAM-COOH) on the collagenolytic activities of endogenous MMPs, the interaction between G4-PAMAM-COOH and demineralized dentine collagen and the influence of G4-PAMAM-COOH pre-treatment on resin–dentine bonding. G4-PAMAN-COOH not only inhibited exogenous soluble rhMMP9 but also hampered the proteolytic activities of dentine collagen-bound MMPs. Cooperated with the results of G4-PAMAM-COOH absorption and desorption, FTIR spectroscopy provided evidence for the exclusive electrostatic interaction rather than hydrogen or covalent bonding between G4-PAMAM-COOH and dentine collagen. Furthermore, G4-PAMAM-COOH pre-treatment showed no damage to resin–dentine bonding because it did not significantly decrease the elastic modulus of the demineralized dentine, degree of conversion, penetration of the adhesive into the dentinal tubules or ultimate tensile strength. Thus, G4-PAMAM-COOH can effectively inactivate MMPs, retard the enzymolysis of collagen by MMPs and scarcely influence the application of resin–dentine bonding.

Effect of Baicalein on Matrix Metalloproteinases and Durability of Resin-Dentin Bonding

2018 ◽  
Vol 43 (4) ◽  
pp. 426-436 ◽  
Author(s):  
J Li ◽  
B Chen ◽  
N Hong ◽  
S Wu ◽  
Y Li
Keyword(s):  
Matrix Metalloproteinases ◽  
Bonding Strength ◽  
Resin Composite ◽  
Artificial Saliva ◽  
Adhesive System ◽  
Inhibitory Effect ◽  
Dentin Bonding ◽  
Microtensile Testing ◽  
Etch And Rinse

SUMMARY Objective: In an attempt to increase resin-dentin bonding quality, this study used baicalein as a preconditioner in an etch-and-rinse adhesive to evaluate its effect on matrix metalloproteinases (MMPs) and adhesive durability. Methods: As a MMP inhibitor and potential collagen cross-linking agent, baicalein was used as a preconditioner in an etch-and-rinse adhesive system. The degree of conversion was evaluated by Fourier-transform infrared spectroscopy. EnzChek gelatinase/collagenase assay kits were then used to detect the MMP inhibitory effect of different concentrations of baicalein (0.1, 0.5, 2.5, and 5.0 μg/mL) on dentin powders. During in vitro bonding procedures, flat dentin surfaces on sound third molars were preconditioned with 2.5 μg/mL baicalein after being acid-etched; this step was followed by continuation of adhesive processes and build-up of resin composite. After resin-dentin stick preparation, bonding strength, failure mode, and interface nanoleakage were respectively evaluated via microtensile testing, stereomicroscopy, and field emission scanning electron microscopy either immediately or after storage in artificial saliva for three or six months. Data were analyzed by two-way analysis of variance and Tukey test (α=0.05). Results: Baicalein at a concentration of 0-5.0 μg/mL did not influence the conversion of adhesives. However, it inhibited the activities of dentin-bond gelatinase and collagenase, especially at a concentration of 2.5 μg/mL, while effectively increasing microtensile bonding strength and decreasing nanoleakage in vitro, both immediately and after aging. Conclusions: Baicalein used as preconditioner in an etch-and-rinse adhesive system has an anti-MMP function and effectively improves resin-dentin bonding durability in vitro, which has potential value in clinical bonding procedures.

scholarly journals Dentinogenic effects of extracted dentin matrix components digested with matrix metalloproteinases

2018 ◽  
Vol 8 (1) ◽  
Author(s):  
Motoki Okamoto ◽  
Yusuke Takahashi ◽  
Shungo Komichi ◽  
Paul R. Cooper ◽  
Mikako Hayashi
Keyword(s):  
Wound Healing ◽  
Matrix Metalloproteinases ◽  
Biological Effects ◽  
Organic Matrix ◽  
Bioactive Molecules ◽  
Cell Functions ◽  
Dentin Matrix ◽  
Matrix Components

Abstract Dentin is primarily composed of hydroxyapatite crystals within a rich organic matrix. The organic matrix comprises collagenous structural components, within which a variety of bioactive molecules are sequestered. During caries progression, dentin is degraded by acids and enzymes derived from various sources, which can release bioactive molecules with potential reparative activity towards the dentin-pulp complex. While these molecules’ repair activities in other tissues are already known, their biological effects are unclear in relation to degradation events during disease in the dentin-pulp complex. This study was undertaken to investigate the effects of dentin matrix components (DMCs) that are partially digested by matrix metalloproteinases (MMPs) in vitro and in vivo during wound healing of the dentin-pulp complex. DMCs were initially isolated from healthy dentin and treated with recombinant MMPs. Subsequently, their effects on the behaviour of primary pulp cells were investigated in vitro and in vivo. Digested DMCs modulated a range of pulp cell functions in vitro. In addition, DMCs partially digested with MMP-20 stimulated tertiary dentin formation in vivo, which exhibited a more regular tubular structure than that induced by treatment with other MMPs. Our results indicate that MMP-20 may be especially effective in stimulating wound healing of the dentin-pulp complex.

scholarly journals Tensile Bond Strengths of Two Adhesives on Irradiated and Nonirradiated Human Dentin

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Cécile Bernard ◽  
Cyril Villat ◽  
Hazem Abouelleil ◽  
Marie-Paule Gustin ◽  
Brigitte Grosgogeat
Keyword(s):  
Bond Strength ◽  
Adhesive System ◽  
Adhesive Systems ◽  
Etch And Rinse ◽  
Human Dentin ◽  
Nanohybrid Composite ◽  
Nonparametric Statistical ◽  
Self Etch

The aim of this study was to assess the effect of radiotherapy on bond efficiency of two different adhesive systems using tensile bond strength test. Twenty extracted teeth after radiotherapy and twenty nonirradiated extracted teeth were used. The irradiation was appliedin vivoto a minimal dose of 50 Gy. The specimens of each group were randomly assigned to two subgroups to test two different adhesive systems. A three-step/etch-and-rinse adhesive system (Optibond FL) and a two-steps/self-etch adhesive system (Optibond XTR) were used. Composite buildups were performed with a nanohybrid composite (Herculite XTR). All specimens were submitted to thermocycling ageing (10000 cycles). The specimens were sectioned in 1 mm2sticks. Microtensile bond strength tests were measured. Nonparametric statistical analyses were performed due to nonnormality of data. Optibond XTR on irradiated and nonirradiated teeth did not show any significant differences. However, Optibond FL bond strength was more effective on nonirradiated teeth than on irradiated teeth. Within the limitations of anin vitrostudy, it can be concluded that radiotherapy had a significant detrimental effect on bond strength to human dentin. However, it seems that adhesive choice could be adapted to the substrata. According to the present study, the two-steps/self-etch (Optibond XTR) adhesive system tested could be more effective on irradiated dentin compared to three-steps/etch-and-rinse adhesive system (Optibond FL).

scholarly journals In Vivo and In Vitro Effects of Chlorhexidine Pretreatment on Immediate and Aged Dentin Bond Strengths

2016 ◽  
Vol 41 (3) ◽  
pp. 258-267 ◽  
Author(s):  
Z Gunaydin ◽  
AR Yazici ◽  
ZC Cehreli
Keyword(s):  
Bond Strength ◽  
Resin Composite ◽  
Adhesive System ◽  
Etch And Rinse ◽  
Bonferroni Test ◽  
Bond Strengths ◽  
In Vitro Effects ◽  
Self Etch

SUMMARY This study evaluated the effect of 2% chlorhexidine (CHX) pretreatment of dentin on the immediate and aged microtensile bond strength (μTBS) of different adhesives to dentin in vivo and in vitro. Class I cavities were prepared in 80 caries-free human third molars of 40 patients in a split-mouth fashion. In each tooth pair, one tooth received 2% CHX pretreatment after which both teeth were randomly assigned to one of the following groups with respect to the type of adhesive system applied: Adper Single Bond 2 (etch-and-rinse), Clearfil SE Bond (two-step self-etch), Clearfil S3 Bond (one-step self-etch), and Adper Prompt-L-Pop (all-in-one self-etch). The teeth were restored with resin composite and extracted for μTBS testing either immediately or after six months in function. In vitro specimen pairs were prepared as with the clinical protocol in intact, freshly extracted human molars, and thereafter, subjected to testing immediately or after 5000× thermocycling. Data were analyzed with four-way analysis of variance (ANOVA). Bonferroni test was utilized for pair-wise comparisons. The immediate bond strength values were significantly higher than “aged” ones for all tested adhesives (p=0.00). The in vitro immediate bond strength values were statistically higher than in vivo bond strength values (p<0.05). While the bond strength of in vitro aged, CHX-treated samples were higher than their in vivo counterparts (p<0.05), no difference was observed in non-CHX treated groups (p>0.05). In the absence of CHX pretreatment, all adhesives showed significantly higher immediate bond strength values than CHX-treated groups, while all “aged”, non-pretreated adhesives exhibited significantly lower bond strength values (both p<0.05). By contrast, chlorhexidine pretreatment resulted in significantly higher aged bond strengths, regardless of the adhesive system and testing condition. Aging-associated decline in dentin bond strength of etch-and rinse and self-etch adhesives can be counteracted by chlorhexidine application.

Targeting Matrix Metalloproteinases in Atherosclerosis and Cardiovascular Dysfunction

2019 ◽  
Vol 70 (2) ◽  
pp. 718-720
Author(s):  
Lucia Corina Dima-Cozma ◽  
Sebastian Cozma ◽  
Delia Hinganu ◽  
Cristina Mihaela Ghiciuc ◽  
Florin Mitu
Keyword(s):  
Smooth Muscle ◽  
Matrix Metalloproteinases ◽  
Cholesterol Synthesis ◽  
Balloon Dilation ◽  
Aortic Aneurysms ◽  
Arterial Lesions ◽  
Smooth Muscle Cell Migration ◽  
And Migration

Matrix metalloproteinases (MMPs) are the primary mediators of extracellular remodeling and their properties are useful in diagnostic evaluation and treatment. They are zinc-dependent proteases. MMPs have been involved in the mechanisms of atherosclerosis in various arterial areas, ischemic heart disease and myocardial infarction, atrial fibrillation and aortic aneurysms. Recently, MMP9 has been implicated in dyslipidemia and cholesterol synthesis by the liver. Increased MMP expression and activity has been associated with neointimal arterial lesions and migration of smooth muscle cells after arterial balloon dilation, while MMP inhibition decreases smooth muscle cell migration in vivo and in vitro.

Modulation of Matrix Metalloproteinases by Plant-Derived Products

2020 ◽  
Vol 20 ◽  
Author(s):  
Nur Najmi Mohamad Anuar ◽  
Nurul Iman Natasya Zulkafali ◽  
Azizah Ugusman
Keyword(s):  
Clinical Trials ◽  
Natural Products ◽  
Matrix Metalloproteinases ◽  
Animal Studies ◽  
Current Knowledge ◽  
In Vitro Models ◽  
In Vivo Studies ◽  
Extracellular Matrix Components

: Matrix metalloproteinases (MMPs) are a group of zinc-dependent metallo-endopeptidase that are responsible towards the degradation, repair and remodelling of extracellular matrix components. MMPs play an important role in maintaining a normal physiological function and preventing diseases such as cancer and cardiovascular diseases. Natural products derived from plants have been used as traditional medicine for centuries. Its active compounds, such as catechin, resveratrol and quercetin, are suggested to play an important role as MMPs inhibitors, thereby opening new insights into their applications in many fields, such as pharmaceutical, cosmetic and food industries. This review summarises the current knowledge on plant-derived natural products with MMP-modulating activities. Most of the reviewed plant-derived products exhibit an inhibitory activity on MMPs. Amongst MMPs, MMP-2 and MMP-9 are the most studied. The expression of MMPs is inhibited through respective signalling pathways, such as MAPK, NF-κB and PI3 kinase pathways, which contribute to the reduction in cancer cell behaviours, such as proliferation and migration. Most studies have employed in vitro models, but a limited number of animal studies and clinical trials have been conducted. Even though plant-derived products show promising results in modulating MMPs, more in vivo studies and clinical trials are needed to support their therapeutic applications in the future.

scholarly journals Plant Recombinant Human Collagen Type I Hydrogels for Corneal Regeneration

2021 ◽  
Author(s):  
Michel Haagdorens ◽  
Elle Edin ◽  
Per Fagerholm ◽  
Marc Groleau ◽  
Zvi Shtein ◽  
...  
Keyword(s):  
Collagen Type ◽  
Collagen Type I ◽  
Collagen Fibrils ◽  
Type I ◽  
Safe Alternative ◽  
Human Donor ◽  
Human Collagen ◽  
Donor Corneas

Abstract Purpose To determine feasibility of plant-derived recombinant human collagen type I (RHCI) for use in corneal regenerative implants Methods RHCI was crosslinked with 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) to form hydrogels. Application of shear force to liquid crystalline RHCI aligned the collagen fibrils. Both aligned and random hydrogels were evaluated for mechanical and optical properties, as well as in vitro biocompatibility. Further evaluation was performed in vivo by subcutaneous implantation in rats and corneal implantation in Göttingen minipigs. Results Spontaneous crosslinking of randomly aligned RHCI (rRHCI) formed robust, transparent hydrogels that were sufficient for implantation. Aligning the RHCI (aRHCI) resulted in thicker collagen fibrils forming an opaque hydrogel with insufficient transverse mechanical strength for surgical manipulation. rRHCI showed minimal inflammation when implanted subcutaneously in rats. The corneal implants in minipigs showed that rRHCI hydrogels promoted regeneration of corneal epithelium, stroma, and nerves; some myofibroblasts were seen in the regenerated neo-corneas. Conclusion Plant-derived RHCI was used to fabricate a hydrogel that is transparent, mechanically stable, and biocompatible when grafted as corneal implants in minipigs. Plant-derived collagen is determined to be a safe alternative to allografts, animal collagens, or yeast-derived recombinant human collagen for tissue engineering applications. The main advantage is that unlike donor corneas or yeast-produced collagen, the RHCI supply is potentially unlimited due to the high yields of this production method. Lay Summary A severe shortage of human-donor corneas for transplantation has led scientists to develop synthetic alternatives. Here, recombinant human collagen type I made of tobacco plants through genetic engineering was tested for use in making corneal implants. We made strong, transparent hydrogels that were tested by implanting subcutaneously in rats and in the corneas of minipigs. We showed that the plant collagen was biocompatible and was able to stably regenerate the corneas of minipigs comparable to yeast-produced recombinant collagen that we previously tested in clinical trials. The advantage of the plant collagen is that the supply is potentially limitless.

scholarly journals Matrix Vesicles: Role in Bone Mineralization and Potential Use as Therapeutics

2021 ◽  
Vol 14 (4) ◽  
pp. 289
Author(s):  
Sana Ansari ◽  
Bregje W. M. de de Wildt ◽  
Michelle A. M. Vis ◽  
Carolina E. de de Korte ◽  
Keita Ito ◽  
...  
Keyword(s):  
Bone Formation ◽  
Bone Regeneration ◽  
Bone Cells ◽  
Bone Mineralization ◽  
Recipient Cell ◽  
Organic Matrix ◽  
Matrix Vesicles ◽  
Matrix Mineralization

Bone is a complex organ maintained by three main cell types: osteoblasts, osteoclasts, and osteocytes. During bone formation, osteoblasts deposit a mineralized organic matrix. Evidence shows that bone cells release extracellular vesicles (EVs): nano-sized bilayer vesicles, which are involved in intercellular communication by delivering their cargoes through protein–ligand interactions or fusion to the plasma membrane of the recipient cell. Osteoblasts shed a subset of EVs known as matrix vesicles (MtVs), which contain phosphatases, calcium, and inorganic phosphate. These vesicles are believed to have a major role in matrix mineralization, and they feature bone-targeting and osteo-inductive properties. Understanding their contribution in bone formation and mineralization could help to target bone pathologies or bone regeneration using novel approaches such as stimulating MtV secretion in vivo, or the administration of in vitro or biomimetically produced MtVs. This review attempts to discuss the role of MtVs in biomineralization and their potential application for bone pathologies and bone regeneration.

scholarly journals An In Vitro Model for Assessing Corneal Keratocyte Spreading and Migration on Aligned Fibrillar Collagen

2018 ◽  
Vol 9 (4) ◽  
pp. 54 ◽  
Author(s):  
Pouriska Kivanany ◽  
Kyle Grose ◽  
Nihan Yonet-Tanyeri ◽  
Sujal Manohar ◽  
Yukta Sunkara ◽  
...  
Keyword(s):  
Growth Factor ◽  
Transforming Growth Factor Beta ◽  
Transforming Growth Factor ◽  
Cell Movement ◽  
Time Lapse ◽  
Collagen Fibrils ◽  
Fibrillar Collagen ◽  
Freeze Injury

Background: Corneal stromal cells (keratocytes) are responsible for developing and maintaining normal corneal structure and transparency, and for repairing the tissue after injury. Corneal keratocytes reside between highly aligned collagen lamellae in vivo. In addition to growth factors and other soluble biochemical factors, feedback from the extracellular matrix (ECM) itself has been shown to modulate corneal keratocyte behavior. Methods: In this study, we fabricate aligned collagen substrates using a microfluidics approach and assess their impact on corneal keratocyte morphology, cytoskeletal organization, and patterning after stimulation with platelet derived growth factor (PDGF) or transforming growth factor beta 1 (TGFβ). We also use time-lapse imaging to visualize the dynamic interactions between cells and fibrillar collagen during wound repopulation following an in vitro freeze injury. Results: Significant co-alignment between keratocytes and aligned collagen fibrils was detected, and the degree of cell/ECM co-alignment further increased in the presence of PDGF or TGFβ. Freeze injury produced an area of cell death without disrupting the collagen. High magnification, time-lapse differential interference contrast (DIC) imaging allowed cell movement and subcellular interactions with the underlying collagen fibrils to be directly visualized. Conclusions: With continued development, this experimental model could be an important tool for accessing how the integration of multiple biophysical and biochemical signals regulate corneal keratocyte differentiation.

Sign in / Sign up

Export Citation Format

Share Document