scholarly journals An exploratory study on low-concentration hexavalent chromium adsorption by Fe(III)-cross-linked chitosan beads

2017 ◽  
Vol 4 (11) ◽  
pp. 170905 ◽  
Author(s):  
Yaoguo Wu ◽  
Yuanjing Zhang ◽  
Jin Qian ◽  
Xu Xin ◽  
Sihai Hu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Functional Groups ◽  
Hexavalent Chromium ◽  
Photoelectron Spectroscopy ◽  
Limiting Factor ◽  
Good Prospect ◽  
Chitosan Beads ◽  
Low Concentration ◽  
Adsorption Mechanisms ◽  
Ph Range

In this study, Fe(III)-cross-linked chitosan beads (Fe(III)-CBs) were synthesized and employed to explore the characteristics and primary mechanism of their hexavalent chromium (Cr(VI)) adsorption under low concentration Cr(VI) (less than 20.0 mg l −1 ) and a pH range from 2.0 to 8.0. Batch tests were conducted to determine the Cr(VI) adsorption capacity and kinetics, and the effects of pH and temperature on the adsorption under low concentration Cr(VI) and a pH range from 2.0 to 8.0. Scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy were employed to explore the characteristics of Fe(III)-CBs and their Cr(VI) adsorption mechanisms. The results show that, unlike the adsorption of other absorbents, the Cr(VI) adsorption was efficient in a wide pH range from 2.0 to 6.0, and well described by the pseudo-first-order model and the Langmuir–Freundlich isotherm model. The capacity of Cr(VI) adsorption by Fe(III)-CBs was as high as 166.3 mg g −1 under temperature 25°C and pH 6.0. The desorption test was also carried out by 0.1 mol l −1 NaOH solution for Fe(III)-CBs regeneration. It was found that Fe(III)-CBs could be re-used for five adsorption–desorption cycles without significant decrease in Cr(VI) adsorption capacity. Ion exchange was confirmed between functional groups (i.e. amino group) and Cr(VI) anions (i.e. CrO 4 2 − ). The amino-like functional groups played a key role in Cr(VI) distribution on the Fe(III)-CBs surface; Cr(VI) adsorbed on Fe(III)-CBs was partially reduced to Cr(III) with alcoholic group served as electron donor, and then formed another rate-limiting factor. So, Fe(III)-CBs has a good prospect in purifying low concentration Cr(VI) water with a pH range from 2.0 to 6.0.

scholarly journals Effect of synthesis conditions  on  methylene blue adsorption capacity of electrochemically preparated graphene

2020 ◽  
Vol 9 (3) ◽  
pp. 9-14
Author(s):  
Hao Pham Van ◽  
Linh Ha Xuan ◽  
Oanh Phung Thi ◽  
Hong Phan Ngoc ◽  
Huy Nguyen Nhat ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Graphene Nanosheets ◽  
Electrochemical Exfoliation ◽  
X Ray ◽  
Synthesis Conditions ◽  
Mb Adsorption

This report presents the effect of synthesis conditions on the synthesis of graphene nanosheets via electrochemical exfoliation method for adsorbing methylene blue from aqueous solution. Oxygen-containing functional groups and defects in the material were characterized by Raman and X-ray photoelectron spectroscopy (XPS). As a result, by using voltage of 15 V, (NH4)2SO4 (5%, 250 mL) and KOH (7.5%, 250 mL), the obtained material showed the highest MB adsorption capacity due to the high densities of oxygen-containing groups and defects comparison to other conditions.

scholarly journals Removal of Chromium(VI) by Chitosan Beads Modified with Sodium Dodecyl Sulfate (SDS)

2020 ◽  
Vol 10 (14) ◽  
pp. 4745
Author(s):  
Xiaoyu Du ◽  
Chihiro Kishima ◽  
Haixin Zhang ◽  
Naoto Miyamoto ◽  
Naoki Kano
Keyword(s):  
Sodium Dodecyl Sulfate ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Sodium Dodecyl ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Chitosan Beads ◽  
X Ray ◽  
Chromium Vi ◽  
Dodecyl Sulfate

In this study, chitosan beads modified with sodium dodecyl sulfate (SDS) were successfully synthesized and employed for the removal of chromium(VI) (Cr(VI)). The adsorption performance of the adsorbent (SDS-chitosan beads) was examined by batch experiments. The partition coefficient (PC) as well as the adsorption capacity were evaluated to assess the true performance of the adsorbent in this work. The adsorbent (SDS-chitosan beads) showed a maximum Cr(VI) adsorption capacity of 3.23 mg·g−1 and PC of 9.5 mg·g−1·mM−1 for Cr(VI). The prepared adsorbent was characterized by different techniques such as scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS) and Fourier transform-infrared spectroscopy (FT-IR). We used inductively coupled plasma mass spectrometry (ICP-MS) for the determination of Cr(VI) in solution. The experimental data could be well-fitted by pseudo-second-order kinetic and Langmuir isotherm models. The thermodynamic studies indicated that the adsorption process was favorable under the higher temperature condition. The SDS-modified chitosan beads synthesized in this work represent a promising adsorbent for removing Cr(VI).

scholarly journals Preparation of GO/MIL-101(Fe,Cu) composite and its adsorption mechanisms for phosphate in aqueous solution

2021 ◽  
Author(s):  
You Wu ◽  
Zuannian Liu ◽  
Bakhtari Mohammad Fahim ◽  
Junnan Luo
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Adsorption Mechanism ◽  
Nitrogen Adsorption ◽  
Adsorption Properties ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Adsorption Mechanisms ◽  
Adsorption Desorption

Abstract In this study, MIL-101(Fe), MIL-101(Fe,Cu), and Graphene Oxide (GO) /MIL-101(Fe,Cu) were synthesized to compose a novel sorbent. The adsorption properties of these three MOFs-based composites were compared toward the removal of phosphate. Furthermore, the influencing factors including reaction time, pH, temperature and initial concentration on the adsorption capacity of phosphate on these materials as well as the reusability of the material were discussed. The structure of fabricated materials and the removal mechanism of phosphate on the composite material were analyzed by Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption-desorption analysis and zeta potential. The results show that the maximum adsorption capacity of phosphate by the composite GO/MIL-101(Fe,Cu)-2% was 204.60 mg·g− 1, which is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe). likewise the specific surface area of GO/MIL-101(Fe,Cu)-2% is 778.11 m2/g is higher than that of MIL-101(Fe,Cu) and MIL-101(Fe),which are 747.75 and 510.66m2/g respectively. The adsorption mechanism of phosphate is electrostatic attraction, form coordination bonds and hydrogen bonds. The fabricated material is a promising adsorbent for the removal of phosphate with good reusability.

scholarly journals Characterization of ultraviolet-modified biochar from different feedstocks for enhanced removal of hexavalent chromium from water

2019 ◽  
Vol 79 (9) ◽  
pp. 1705-1716 ◽  
Author(s):  
Zhongya Peng ◽  
Xiaomei Liu ◽  
Hongkun Chen ◽  
Qinglong Liu ◽  
Jingchun Tang
Keyword(s):  
Functional Groups ◽  
Hexavalent Chromium ◽  
Uv Irradiation ◽  
Photoelectron Spectroscopy ◽  
Environmental Remediation ◽  
Low Cost ◽  
Surface Areas ◽  
Modified Biochar ◽  
Sorption Ability ◽  
Novel Material

Abstract Biochars produced from different feedstocks via pyrolytic carbonization and ultraviolet (UV) modification were used as alternative adsorbents for aqueous hexavalent chromium (Cr(VI)) remediation. Structural and morphological analysis showed that UV irradiation increased the surface area of biochar and added a large amount of oxygen-containing functional groups on the biochar's surface, resulting in about 2–5 times increase of Cr(VI) removing capacity (14.39–20.04 mg/g) compared to that of unmodified biochars (3.60–8.43 mg/g). The sorption ability among different feedstocks after modification was as follows: corn stack > sawdust > wheat straw. The adsorption kinetics and adsorption isotherm data agreed well with the pseudo-second-order model and Freundlich model, respectively. Experimental and modeling results suggested that the oxygen-containing functional groups and surface areas of biochars were notably increased after UV irradiation, which was mainly governed by surface complexation. X-ray photoelectron spectroscopy analysis showed that reduction occurred during Cr(VI) adsorption. In addition, UV irradiation significantly increased the concentration of dissolved organic matter (DOM) in biochars. The collected outcomes showed that UV-modified biochar was a good material for the removal of hexavalent chromium from aqueous medium. The excellent adsorption capacity, environmental-friendly and low cost properties made the novel material an auspicious candidate for environmental remediation.

scholarly journals The Effects of Functional Groups and Missing Linkers on the Adsorption Capacity of Aromatic Hydrocarbons in UiO-66 Thin Films

Inorganics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 1
Author(s):  
Jennifer Shankwitz ◽  
Daniel Speed ◽  
Dillon Sinanan ◽  
Greg Szulczewski
Keyword(s):  
Thin Films ◽  
Adsorption Capacity ◽  
Functional Groups ◽  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
High Vacuum ◽  
X Ray ◽  
Porous Thin Films ◽  
Henry's Constants ◽  
Metal Organic

The adsorption of benzene, toluene, ethylbenzene, and xylene isomers, also known as BTEX, from the gas phase into porous thin films of the metal–organic framework UiO-66-X, where X = H, NH2, and NO2, was measured to quantify adsorption capacity. The thin films were grown by a vapor-conversion method onto Au-coated quartz microbalance crystals. The MOF thin films were characterized by IR and Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. The thin films were activated by heating under high vacuum and exposed to each gas to calculate the Henry’s constant. The results demonstrate that the functional groups in the organic linker and missing-linkers both play important roles in the adsorption capacity. Several trends can be observed in the data. First, all the compounds in the BTEX family have lower Henry’s constants in the UiO-66-H films compared to the UiO-66-NH2 and UiO-66-NO2 films, which can largely be attributed to the absence of a functional group on the linker. Second, at 25 °C, the Henry’s constants for all the BTEX compounds in UiO-66-NO2 films are larger than UiO-66-NH2 films. Third, the role of missing linkers is addressed by comparing the measured adsorption capacity to ideal pore filling. The results show that the UiO-66-H films are the most defect-free and the UiO-66-NO2 films have the most missing linker defects.

scholarly journals Stormwater Runoff Treatment Using Pervious Concrete Modified with Various Nanomaterials: A Comprehensive Review

2021 ◽  
Vol 13 (15) ◽  
pp. 8552
Author(s):  
Vahid Alimohammadi ◽  
Mehdi Maghfouri ◽  
Delaram Nourmohammadi ◽  
Pejman Azarsa ◽  
Rishi Gupta ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Compressive Strength ◽  
Adsorption Capacity ◽  
Removal Rate ◽  
Stormwater Runoff ◽  
Infiltration Rate ◽  
Stormwater Treatment ◽  
Adsorption Mechanisms ◽  
Wide Range ◽  
Adsorption Processes

Clean water is a vital need for all living creatures during their lifespan. However, contaminated stormwater is a major issue around the globe. A wide range of contaminants, including heavy metals, organic and inorganic impurities, has been discovered in stormwater. Some commonly utilized methods, such as biological, physical and chemical procedures, have been considered to overcome these issues. However, these current approaches result in moderate to low contaminant removal efficiencies for certain classes of contaminants. Of late, filtration and adsorption processes have become more featured in permeable concretes (PCs) for the treatment of stormwater. As nanoparticles have vast potential and unique characterizations, such as a higher surface area to cure polluted stormwater, employing them to improve permeable concretes’ capabilities in stormwater treatment systems is an effective way to increase filtration and adsorption mechanisms. The present study reviews the removal rate of different stormwater contaminants such as heavy metals, organic and other pollutants using nanoparticle-improved PC. The application of different kinds of nanomaterials in PC as porous media to investigate their influences on the properties of PC, including the permeability rate, compressive strength, adsorption capacity and mix design of such concrete, was also studied. The findings of this review show that different types of nanomaterials improve the removal efficiency, compressive strength and adsorption capacity and decrease the infiltration rate of PC during the stormwater treatment process. With regard to the lack of comprehensive investigation concerning the use of nanomaterials in PC to treat polluted stormwater runoff, this study reviews 242 published articles on the removal rate of different stormwater contaminants by using PC improved with nanoparticles.

scholarly journals Removal of hexavalent chromium from wastewater by Cu/Fe bimetallic nanoparticles

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jien Ye ◽  
Yi Wang ◽  
Qiao Xu ◽  
Hanxin Wu ◽  
Jianhao Tong ◽  
...  
Keyword(s):  
Hexavalent Chromium ◽  
Removal Efficiency ◽  
Photoelectron Spectroscopy ◽  
Bimetallic Nanoparticles ◽  
Chemical Reduction ◽  
Particle Surface ◽  
Zerovalent Iron ◽  
Order Model ◽  
X Ray ◽  
Nanoscale Zerovalent Iron

AbstractPassivation of nanoscale zerovalent iron hinders its efficiency in water treatment, and loading another catalytic metal has been found to improve the efficiency significantly. In this study, Cu/Fe bimetallic nanoparticles were prepared by liquid-phase chemical reduction for removal of hexavalent chromium (Cr(VI)) from wastewater. Synthesized bimetallic nanoparticles were characterized by transmission electron microscopy, Brunauer–Emmet–Teller isotherm, and X-ray diffraction. The results showed that Cu loading can significantly enhance the removal efficiency of Cr(VI) by 29.3% to 84.0%, and the optimal Cu loading rate was 3% (wt%). The removal efficiency decreased with increasing initial pH and Cr(VI) concentration. The removal of Cr(VI) was better fitted by pseudo-second-order model than pseudo-first-order model. Thermodynamic analysis revealed that the Cr(VI) removal was spontaneous and endothermic, and the increase of reaction temperature facilitated the process. X-ray photoelectron spectroscopy (XPS) analysis indicated that Cr(VI) was completely reduced to Cr(III) and precipitated on the particle surface as hydroxylated Cr(OH)3 and CrxFe1−x(OH)3 coprecipitation. Our work could be beneficial for the application of iron-based nanomaterials in remediation of wastewater.

scholarly journals Pristine and Magnetic Kenaf Fiber Biochar for Cd2+ Adsorption from Aqueous Solution

2021 ◽  
Vol 18 (15) ◽  
pp. 7949
Author(s):  
Anwar Ameen Hezam Saeed ◽  
Noorfidza Yub Harun ◽  
Suriati Sufian ◽  
Muhammad Roil Bilad ◽  
Zaki Yamani Zakaria ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Textural Properties ◽  
Ion Concentration ◽  
Solution Temperature ◽  
Maximum Adsorption Capacity ◽  
Magnetic Biochar ◽  
X Ray ◽  
Study Results ◽  
Capacity Surface

Development of strategies for removing heavy metals from aquatic environments is in high demand. Cadmium is one of the most dangerous metals in the environment, even under extremely low quantities. In this study, kenaf and magnetic biochar composite were prepared for the adsorption of Cd2+. The synthesized biochar was characterized using (a vibrating-sample magnetometer VSM), Scanning electron microscopy (SEM), X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). The adsorption batch study was carried out to investigate the influence of pH, kinetics, isotherm, and thermodynamics on Cd2+ adsorption. The characterization results demonstrated that the biochar contained iron particles that help in improving the textural properties (i.e., surface area and pore volume), increasing the number of oxygen-containing groups, and forming inner-sphere complexes with oxygen-containing groups. The adsorption study results show that optimum adsorption was achieved under pH 5–6. An increase in initial ion concentration and solution temperature resulted in increased adsorption capacity. Surface modification of biochar using iron oxide for imposing magnetic property allowed for easy separation by external magnet and regeneration. The magnetic biochar composite also showed a higher affinity to Cd2+ than the pristine biochar. The adsorption data fit well with the pseudo-second-order and the Langmuir isotherm, with the maximum adsorption capacity of 47.90 mg/g.

scholarly journals Cr (III) Removal Capacity in Aqueous Solution in Relation to the Functional Groups Present in the Orange Peel (Citrus sinensis)

2021 ◽  
Vol 11 (14) ◽  
pp. 6346
Author(s):  
Laura Patiño-Saldivar ◽  
José A. Hernández ◽  
Alba Ardila ◽  
Mercedes Salazar-Hernández ◽  
Alfonso Talavera ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Functional Groups ◽  
Orange Peel ◽  
Pollutant Removal ◽  
External Mass Transfer ◽  
Equilibrium Studies ◽  
Removal Capacity ◽  
Point Analysis ◽  
Agroindustrial Waste ◽  
Previously Treated

Bioremediation is a pollutant removal method that has had a great boom due to the diversity of agroindustrial waste that can be used for this purpose, and that has shown having great efficiency and profitability in the adsorption of heavy metals, such as Pb, Cu, and Co. Based on the above, the present work carried out kinetic and equilibrium studies of bioadsorption of Cr (III) using orange peel (OP) as adsorbent, previously treated with methanol, water, and a water–methanol mixture at different pH (0.91, 1.78 and 2.72), and at 30 °C, finding that the adsorption capacity at equilibrium increases with increasing pH, having a maximum of 55 mg g−1 at pH 2.72—under these conditions, lower adsorption energy was used to remove Cr (III). In addition, it was determined that there are no external mass transfer limitations. An isoelectric point analysis indicated that the adsorption is not carried out by electrostatic forces and a FTIR study of the functional groups of OP showed a decrease in the main functional groups (pectin, cellulose, and lignin, among others), which is directly related to the adsorption capacity of the bioadsorbent.

scholarly journals Fabrication of Carboxymethylcellulose/Metal-Organic Framework Beads for Removal of Pb(II) from Aqueous Solution

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 942 ◽  
Author(s):  
Huo-Xi Jin ◽  
Hong Xu ◽  
Nan Wang ◽  
Li-Ye Yang ◽  
Yang-Guang Wang ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Langmuir Isotherm ◽  
Adsorption Equilibrium ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Metal Organic ◽  
Langmuir Isotherm Model

The ability to remove toxic heavy metals, such as Pb(II), from the environment is an important objective from both human-health and ecological perspectives. Herein, we describe the fabrication of a novel carboxymethylcellulose-coated metal organic material (MOF-5–CMC) adsorbent that removed lead ions from aqueous solutions. The adsorption material was characterized by Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. We studied the functions of the contact time, pH, the original concentration of the Pb(II) solution, and adsorption temperature on adsorption capacity. MOF-5–CMC beads exhibit good adsorption performance; the maximum adsorption capacity obtained from the Langmuir isotherm-model is 322.58 mg/g, and the adsorption equilibrium was reached in 120 min at a concentration of 300 mg/L. The adsorption kinetics is well described by pseudo-second-order kinetics, and the adsorption equilibrium data are well fitted to the Langmuir isotherm model (R2 = 0.988). Thermodynamics experiments indicate that the adsorption process is both spontaneous and endothermic. In addition, the adsorbent is reusable. We conclude that MOF-5–CMC is a good adsorbent that can be used to remove Pb(II) from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document