Elevated temperature and CO2 cause differential growth stimulation and drought survival responses in eucalypt species from contrasting habitats

2019 ◽  
Vol 39 (11) ◽  
pp. 1806-1820 ◽  
Author(s):  
Deborah M G Apgaua ◽  
David Y P Tng ◽  
Samantha J Forbes ◽  
Yoko F Ishida ◽  
Nara O Vogado ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Stomatal Conductance ◽  
Elevated Co2 ◽  
Elevated Temperatures ◽  
Interactive Effects ◽  
Plant Performance ◽  
Eucalyptus Species ◽  
Climate Change Scenarios ◽  
Differential Growth ◽  
Tropical Regions

Abstract Climate change scenarios predict increasing atmospheric CO2 concentrations ([CO2]), temperatures and droughts in tropical regions. Individually, the effects of these climate factors on plants are well established, whereas experiments on the interactive effects of a combination of factors are rare. Moreover, how these environmental factors will affect tree species along a wet to dry gradient (e.g., along tropical forest–savanna transitions) remains to be investigated. We hypothesized that under the simulated environmental conditions, plant growth, physiological performance and survivorship would vary in a manner consistent with the species’ positions of origin along this gradient. In a glasshouse experiment, we raised seedlings of three Eucalyptus species, each occurring naturally in a wet forest, savanna and forest–savanna ecotone, respectively. We evaluated the effect of drought, elevated temperature (4 °C above ambient glasshouse temperature of 22 °C) and elevated temperature in combination with elevated [CO2] (400 ppm [CO2] above ambient of 400 ppm), on seedling growth, survivorship and physiological responses (photosynthesis, stomatal conductance and water-use efficiency). Elevated temperature under ambient [CO2] had little effect on growth, biomass and plant performance of well-watered seedlings, but hastened mortality in drought-affected seedlings, affecting the forest and ecotone more strongly than the savanna species. In contrast, elevated [CO2] in combination with elevated temperatures delayed the appearance of drought stress symptoms and enhanced survivorship in drought-affected seedlings, with the savanna species surviving the longest, followed by the ecotone and forest species. Elevated [CO2] in combination with elevated temperatures also enhanced growth and biomass and photosynthesis in well-watered seedlings of all species, but modified shoot:root biomass partitioning and stomatal conductance differentially across species. Our study highlights the need for a better understand of the interactive effects of elevated [CO2], temperature and drought on plants and the potential to upscale these insights for understanding biome changes.

Manipulating Agricultural Plants for a Future High CO2 Environment

1992 ◽  
Vol 40 (5) ◽  
pp. 421 ◽  
Author(s):  
M Badger
Keyword(s):  
Elevated Co2 ◽  
Elevated Temperatures ◽  
Plant Performance ◽  
C3 Plants ◽  
Dry Matter Accumulation ◽  
Plant Resources ◽  
C3 Plant ◽  
High Co2 ◽  
Net Assimilation ◽  
Co2 Environment

This paper discusses the potential ways in which C3 plant performance may benefit from a future high-CO2 environment. These include increases in the efficiencies for light, nitrogen and water utilisation, particularly at elevated temperatures, resulting from the improvement which will occur in the performance of the primary carboxylating enzyme, Rubisco. However, while growth experiments at elevated CO2 indicate that C3 plants show stimulation of dry matter accumulation, the potential gains are greatly ameliorated by a redistribution of plant resources. This primarily occurs via a reduction in the leaf area ratio which offsets increases in the net assimilation rate. In addition, there may be an overcommitment of nitrogen in key photosynthetic components such as Rubisco and the thylakoid electron transport system. It is concluded that plants may not be genetically adapted to optimise their growth and performance at elevated CO2 and that consideration should be given to exploring avenues for manipulating plants for more optimal responses. Targets for improvement of growth at elevated CO2 include (1) altering source-sink relations; (2) improving the redistribution of nitrogen between the photosynthetic machinery and the rest of the plant; and (3) changing the response of stomata to CO2 and humidity to increase water-use efficiency even further than is currently predicted.

scholarly journals Effects of Elevated Temperature and Ozone in Brassica juncea L.: Growth, Physiology, and ROS Accumulation

Forests ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 68 ◽  
Author(s):  
Jong Kyu Lee ◽  
Su Young Woo ◽  
Myeong Ja Kwak ◽  
Sang Hee Park ◽  
Han Dong Kim ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Stomatal Conductance ◽  
Brassica Juncea ◽  
Dry Weight ◽  
Interactive Effects ◽  
Growth Physiology ◽  
Injury Index ◽  
Elevated O3 ◽  
Ros Accumulation ◽  
Plant Injury

Global warming and ozone (O3) pose serious threats to crop yield and ecosystem health. Although neither of these factors will act individually in reality, most studies have focused on the responses of plants to air pollution or climate change. Interactive effects of these remain poorly studied. Therefore, this study was conducted to assess the effects of optimal (22/20 °C day/night) and elevated temperature (27/25 °C) and/or ambient (10 ± 10 nL L−1) and elevated O3 concentrations (100 ± 10 nL L−1) on the growth, physiology, and reactive oxygen species (ROS) accumulation of leaf mustard (Brassica juncea L.). The aim was to examine whether elevated temperature increase the O3 damage due to increasing stomatal conductance, and thus, O3 flux into the leaf. Significant reductions in photosynthetic rates occurred under O (elevated O3 with optimal temperatures) and OT (elevated O3 and temperature) conditions compared to C (controls). Stomatal conductance was significantly higher under T than in the C at 7 DAE. Under OT conditions, O3 flux significantly increased compared to that in O conditions at 7 days after exposure (DAE). Significant reductions in total fresh and dry weight were observed under OT conditions compared to those under O. Furthermore, significant reductions in levels of carotenoids and ascorbic acid were observed under OT conditions compared to O. Lipid peroxidation and accumulation of ROS such as hydroxyl radical, hydrogen peroxide, and superoxide radical were higher under O and OT conditions than in C conditions at 7 and 14 DAE. As a result of O3 stress, the results of the present study indicated that the plant injury index significantly increased under OT compared to O conditions. This result suggested that elevated temperature (+5 °C) may enhance O3 damage to B. juncea by increasing stomatal conductance and O3 flux into leaves.

Will Plant Performance on Soils Prone to Drought or With High Mechanical Impedance to Root Penetration Be Improved Under Elevated Atmospheric CO2 Concentration

1992 ◽  
Vol 40 (5) ◽  
pp. 491 ◽  
Author(s):  
J Masle
Keyword(s):  
Stomatal Conductance ◽  
Elevated Co2 ◽  
Leaf Growth ◽  
Carbon Partitioning ◽  
Growth Patterns ◽  
Plant Performance ◽  
Root Penetration ◽  
Mechanical Resistance ◽  
Growth Responses ◽  
Root Cells

Plants growing on dry soils or on soils with high mechanical resistance to root penetration grow more slowly and exhibit lower stomatal conductance than those growing on moist and loose soils. In most situations in nature where edaphic stresses develop rather slowly (compared to stresses imposed in most pot experiments conducted under controlled conditions), photosynthesis is mainly reduced via stomatal effects rather than via changes in mesophyll capacity for photosynthesis. Elevated CO2 will induce an increase in the internal partial pressure of CO2, despite stomatal conductance being lowered even further. Photosynthesis will therefore be improved, and leaf turgor will be increased. It is widely thought that growth on dry or hard soils is not carbon limited because levels of soluble carbohydrates in the leaves and root cells are increased. It is shown in this paper that growth on soil with high mechanical resistance does respond to elevated CO2. However, this response is smaller than expected from the increase of carbon assimilation rate because: (a) carbon partitioning is altered so that supplementary carbohydrates are preferentially allocated to the roots; (b) leaf growth sensitivity to internal availability of sugars is lower than in plants growing on loose soils. These alterations of 'sink activity' and carbon partitioning are mediated by unknown signalling factor(s) induced in the roots. It is not known whether the root factors acting in droughted plants are of the same nature. In both droughted and impeded plants the interacting effects of these factors and of ambient CO2 levels are likely to result in improved transpiration efficiency. More experiments are needed in this area, however, especially to ascertain the relative contribution of changes in growth patterns versus changes in the patterns of water use. In conclusion, the importance of identifying the nature of the sink limitations induced by root signals is emphasised. It is a fundamental area of research to be developed not only for assessing growth responses to rising CO2 under edaphic stress, but likely also for reconciling conflicting responses of field-grown and pot-grown plants.

scholarly journals Projections for Mexico’s Tropical Rainforests Considering Ecological Niche and Climate Change

Forests ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 119
Author(s):  
Antonio Fidel Santos-Hernández ◽  
Alejandro Ismael Monterroso-Rivas ◽  
Diódoro Granados-Sánchez ◽  
Antonio Villanueva-Morales ◽  
Malinali Santacruz-Carrillo
Keyword(s):  
Climate Change ◽  
Ecological Niche ◽  
Potential Distribution ◽  
Tropical Rainforest ◽  
Statistical Significance ◽  
Climate Change Scenarios ◽  
Climate Conditions ◽  
Tropical Regions ◽  
Temperature And Precipitation ◽  
Ecological Importance

The tropical rainforest is one of the lushest and most important plant communities in Mexico’s tropical regions, yet its potential distribution has not been studied in current and future climate conditions. The aim of this paper was to propose priority areas for conservation based on ecological niche and species distribution modeling of 22 species with the greatest ecological importance at the climax stage. Geographic records were correlated with bioclimatic temperature and precipitation variables using Maxent and Kuenm software for each species. The best Maxent models were chosen based on statistical significance, complexity and predictive power, and current potential distributions were obtained from these models. Future potential distributions were projected with two climate change scenarios: HADGEM2_ES and GFDL_CM3 models and RCP 8.5 W/m2 by 2075–2099. All potential distributions for each scenario were then assembled for further analysis. We found that 14 tropical rainforest species have the potential for distribution in 97.4% of the landscape currently occupied by climax vegetation (0.6% of the country). Both climate change scenarios showed a 3.5% reduction in their potential distribution and possible displacement to higher elevation regions. Areas are proposed for tropical rainforest conservation where suitable bioclimatic conditions are expected to prevail.

scholarly journals Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1473
Author(s):  
Jun Zhao ◽  
Kang Wang ◽  
Shuaibin Wang ◽  
Zike Wang ◽  
Zhaohui Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperature ◽  
Fly Ash ◽  
Residual Strength ◽  
Elevated Temperatures ◽  
High Volume ◽  
Sem Analysis ◽  
Geopolymer Concrete ◽  
Ordinary Concrete ◽  
Exposure Temperature

This paper presents results from experimental work on mechanical properties of geopolymer concrete, mortar and paste prepared using fly ash and blended slag. Compressive strength, splitting tensile strength and flexural strength tests were conducted on large sets of geopolymer and ordinary concrete, mortar and paste after exposure to elevated temperatures. From Thermogravimetric analyzer (TGA), X-ray diffraction (XRD), Scanning electron microscope (SEM) test results, the geopolymer exhibits excellent resistance to elevated temperature. Compressive strengths of C30, C40 and C50 geopolymer concrete, mortar and paste show incremental improvement then followed by a gradual reduction, and finally reach a relatively consistent value with an increase in exposure temperature. The higher slag content in the geopolymer reduces residual strength and the lower exposure temperature corresponding to peak residual strength. Resistance to elevated temperature of C40 geopolymer concrete, mortar and paste is better than that of ordinary concrete, mortar and paste at the same grade. XRD, TGA and SEM analysis suggests that the heat resistance of C–S–H produced using slag is lower than that of sulphoaluminate gel (quartz and mullite, etc.) produced using fly ash. This facilitates degradation of C30, C40 and C50 geopolymer after exposure to elevated temperatures.

Effects of Elevated Temperatures on the Compressive Strength of HFCC

2011 ◽  
Vol 261-263 ◽  
pp. 416-420 ◽  
Author(s):  
Fu Ping Jia ◽  
Heng Lin Lv ◽  
Yi Bing Sun ◽  
Bu Yu Cao ◽  
Shi Ning Ding
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
Fly Ash ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Relative Strength ◽  
Ordinary Concrete ◽  
Residual Compressive Strength ◽  
Fly Ash Concrete ◽  
The Relationship

This paper presents the results of elevated temperatures on the compressive of high fly ash content concrete (HFCC). The specimens were prepared with three different replacements of cement by fly ash 30%, 40% and 50% by mass and the residual compressive strength was tested after exposure to elevated temperature 250, 450, 550 and 650°C and room temperature respectively. The results showed that the compressive strength apparently decreased with the elevated temperature increased. The presence of fly ash was effective for improvement of the relative strength, which was the ratio of residual compressive strength after exposure to elevated temperature and ordinary concrete. The relative compressive strength of fly ash concrete was higher than those of ordinary concrete. Based on the experiments results, the alternating simulation formula to determine the relationship among relative strength, elevated temperature and fly ash replacement is developed by using regression of results, which provides the theoretical basis for the evaluation and repair of HFCC after elevated temperature.

Microstructure Evolution and Mechanical Properties of an Al-Cu-Mg Alloy at Elevated Temperature

2014 ◽  
Vol 1004-1005 ◽  
pp. 148-153
Author(s):  
Min Hao ◽  
Ji Gang Ru ◽  
Ming Liu ◽  
Kun Zhang ◽  
Liang Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Elevated Temperature ◽  
Elevated Temperatures ◽  
Shear Fracture ◽  
S Phase ◽  
Mg Alloy ◽  
Transmission Electron ◽  
Fracture Features ◽  
Scanning Electron

Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to study the microstructure and mechanical behavior of an Al-Cu-Mg alloy after tensile test at 125°C, 150°C, 175°C and 200 °C, respectively. The yield strength and ultimate tensile strength decreased with the increase of temperature, while the elongation increased firstly and then decreased. The S and S′ precipitate after tension at elevated temperatures. When the temperature was higher than 175°C, the precipitate coarsens rapidly. The alloys displayed a shear fracture features at elevated temperature. The larger S′ and S phase coarsened and dropped which forming crack in the grain boundaries and precipitate interfaces, resulting in the decrease of the elongation of the alloy.

Study on the Formability of Aluminium Alloy Sheets at Room and Elevated Temperatures

2016 ◽  
Vol 877 ◽  
pp. 393-399
Author(s):  
Jia Zhou ◽  
Jun Ping Zhang ◽  
Ming Tu Ma
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Elevated Temperature ◽  
Aluminium Alloy ◽  
Aluminium Alloys ◽  
Elevated Temperatures ◽  
Hot Stamping ◽  
Natural Aging ◽  
Alloy Sheet ◽  
Aluminum Alloy Sheet

This paper presents the main achievements of a research project aimed at investigating the applicability of the hot stamping technology to non heat treatable aluminium alloys of the 5052 H32 and heat treatable aluminium alloys of the 6016 T4P after six months natural aging. The formability and mechanical properties of 5052 H32 and 6016 T4P aluminum alloy sheets after six months natural aging under different temperature conditions were studied, the processing characteristics and potential of the two aluminium alloy at room and elevated temperature were investigated. The results indicated that the 6016 aluminum alloy sheet exhibit better mechanical properties at room temperature. 5052 H32 aluminum alloy sheet shows better formability at elevated temperature, and it has higher potential to increase formability by raising the temperature.

Sign in / Sign up

Export Citation Format

Share Document