Using Stem Char to Predict Mortality and Insect Infestation of Fire-Damaged Slash Pines

1984 ◽  
Vol 8 (2) ◽  
pp. 85-88 ◽  
Author(s):  
Wayne N. Dixon ◽  
Jeffrey A. Corneil ◽  
Robert C. Wilkinson ◽  
John L. Foltz

Abstract Monthly observations of planted slash pines (Pinus elliottii Engelm.) damaged by a March wildfire showed that the magnitude and rapidity of tree mortality were directly related to severity of stem char. Cumulative tree mortalities by November were 5, 25, and 79 percent for 7- to 8-year-old trees in plots with light, medium, and severe stem char classifications (average stem char <61 percent, 61 to 80 percent, and >80 percent of total tree height, respectively). In 15-year-old plantations the mortality rates were 46, 95, and 100 percent for the three damage classes. Most tree mortality occurred rapidly (before mid-May) in the younger plantations and in the severely damaged portions of the older plantations; mortality rates were slower and continued until August in lightly and moderately damaged areas of the older plantations. Ips engraver beetles and the southern pine sawyer were the principal insects infesting trees in May. Reproduction weevil broods were common in tree roots during November. Implications for pest management are discussed.

1993 ◽  
Vol 17 (1) ◽  
pp. 26-31 ◽  
Author(s):  
J. David Lenhart ◽  
Gary D. Kronrad ◽  
Michael S. Fountain

Abstract The performance of young (less than 10 yr) loblolly (Pinus taeda L.) and slash (Pinus elliottii Engelm.) pine trees was compared on planted sites in southeast Texas. Performance was compared for: total tree height; tree diameter; height to live tree crown; tree volume index,; incidenceof fusiform rust (Cronartium quercuum [Berk.] Miyabe ex Shirai f. sp. fusiforme); crookedness of stems; and survival rates. For these young trees, slash pine tended to perform better in southeast Texas than loblolly pine in total tree height, tree diameter, stem size, height to first livebranch and stem straightness. However, loblolly pine was less susceptible to fusiform rust than slash pine, and its mortality rate was lower than slash pine. However, based on the performance of these young plantations, a recommendation on the preferred pine species to plant in southeast Texasmight be premature. South. J. Appl. For. 17(1):26-31.


2020 ◽  
Vol 31 (1) ◽  
pp. 24-35 ◽  
Author(s):  
Somiahnadar Rajendran

Insects are a common problem in stored produce. The author describes the extent of the problem and approaches to countering it. Stored products of agricultural and animal origin, whether edible or non-edible, are favourite food for insect pests. Durable agricultural produce comprising dry raw and processed commodities and perishables (fresh produce) are vulnerable to insect pests at various stages from production till end-use. Similarly, different animal products and museum objects are infested mainly by dermestids. Insect pests proliferate due to favourable storage conditions, temperature and humidity and availability of food in abundance. In addition to their presence in food commodities, insects occur in storages (warehouses, silos) and processing facilities (flour mills, feed mills). Insect infestation is also a serious issue in processed products and packed commodities. The extent of loss in stored products due to insects varies between countries depending on favourable climatic conditions, and pest control measures adopted. In stored food commodities, insect infestation causes loss in quantity, changes in nutritional quality, altered chemical composition, off-odours, changes in end-use products, dissemination of toxigenic microorganisms and associated health implications. The insects contribute to contaminants such as silk threads, body fragments, hastisetae, excreta and chemical secretions. Insect activity in stored products increases the moisture content favouring the growth of moulds that produce mycotoxins (e.g., aflatoxin in stored peanuts). Hide beetle, Dermestes maculatus infesting silkworm cocoons has been reported to act as a carrier of microsporidian parasite Nosema bombycis that causes pebrine disease in silkworms. In dried fish, insect infestation leads to higher bacterial count and uric acid levels. Insects cause damage in hides and skins affecting their subsequent use for making leather products. The trend in stored product insect pest management is skewing in favour of pest prevention, monitoring, housekeeping and finally control. Hermetic storage system can be supplemented with CO2 or phosphine application to achieve quicker results. Pest detection and monitoring has gained significance as an important tool in insect pest management. Pheromone traps originally intended for detection of infestations have been advanced as a mating disruption device ensuing pest suppression in storage premises and processing facilities; pheromones also have to undergo registration protocols similar to conventional insecticides in some countries. Control measures involve reduced chemical pesticide use and more non-chemical inputs such as heat, cold/freezing and desiccants. Furthermore, there is an expanding organic market where physical and biological agents play a key role. The management options for insect control depend on the necessity or severity of pest incidence. Generally, nonchemical treatments, except heat, require more treatment time or investment in expensive equipment or fail to achieve 100% insect mortality. Despite insect resistance, environmental issues and residue problems, chemical control is inevitable and continues to be the most effective and rapid control method. There are limited options with respect to alternative fumigants and the alternatives have constraints as regards environmental and health concerns, cost, and other logistics. For fumigation of fresh agricultural produce, new formulations of ethyl formate and phosphine are commercially applied replacing methyl bromide. Resistance management is now another component of stored product pest management. In recent times, fumigation techniques have improved taking into consideration possible insect resistance. Insect control deploying nanoparticles, alone or as carriers for other control agents, is an emerging area with promising results. As there is no single compound with all the desired qualities, a necessity has arisen to adopt multiple approaches. Cocktail applications or combination treatments (IGRs plus organophosphorus insecticides, diatomaceous earth plus contact insecticides, nanoparticles plus insecticides/pathogens/phytocompounds and conventional fumigants plus CO2; vacuum plus fumigant) have been proved to be more effective. The future of store product insect pest management is deployment of multiple approaches and/or combination treatments to achieve the goal quickly and effectively.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Michael J. Koontz ◽  
Andrew M. Latimer ◽  
Leif A. Mortenson ◽  
Christopher J. Fettig ◽  
Malcolm P. North

AbstractThe recent Californian hot drought (2012–2016) precipitated unprecedented ponderosa pine (Pinus ponderosa) mortality, largely attributable to the western pine beetle (Dendroctonus brevicomis; WPB). Broad-scale climate conditions can directly shape tree mortality patterns, but mortality rates respond non-linearly to climate when local-scale forest characteristics influence the behavior of tree-killing bark beetles (e.g., WPB). To test for these cross-scale interactions, we conduct aerial drone surveys at 32 sites along a gradient of climatic water deficit (CWD) spanning 350 km of latitude and 1000 m of elevation in WPB-impacted Sierra Nevada forests. We map, measure, and classify over 450,000 trees within 9 km2, validating measurements with coincident field plots. We find greater size, proportion, and density of ponderosa pine (the WPB host) increase host mortality rates, as does greater CWD. Critically, we find a CWD/host size interaction such that larger trees amplify host mortality rates in hot/dry sites. Management strategies for climate change adaptation should consider how bark beetle disturbances can depend on cross-scale interactions, which challenge our ability to predict and understand patterns of tree mortality.


IAWA Journal ◽  
2000 ◽  
Vol 21 (1) ◽  
pp. 31-40 ◽  
Author(s):  
Teresa Quilhó ◽  
Helena Pereira ◽  
Hans Georg Richter

The axial variation of bark thickness and quantitative anatomical features of Eucalyptus globulus bark were analysed for one site based on individual measurements of ten 15-year-old trees at six height levels (DBH, 5%, 15%, 35%, 55% and 75% of total tree height). The parameters studied were: length, tangential diameter and percentage of sieve tubes; length, width, cell wall thickness and percentage of fibres; height and percentage of rays; percentage of sclereids in the secondary phloem. Bark thickness decreases from base to top of the tree. Fibre width and wall thickness decrease from base upwards. No distinct axial patterns of variation were observed for the other biometric variables studied. Parenchyma is the main cell type of the bark (50%) followed by fibres (27.9%), rays (12.1%), sieve tubes (2.7%), and sclereids (7.3%). The cell type proportions vary significantly within the tree, i.e., parenchyma, ray and sclereid proportions decrease, fibre and sieve tube proportions increase towards the top of the tree.


FLORESTA ◽  
2013 ◽  
Vol 43 (3) ◽  
pp. 439 ◽  
Author(s):  
Saulo Jorge Téo ◽  
Alan Marcon ◽  
Tiago Ehlers ◽  
Júlio César Bianchi ◽  
Adriano Peloso ◽  
...  

Os objetivos deste trabalho foram ajustar e selecionar modelos de afilamento para estimar diâmetros a várias alturas e volume total, com e sem casca, de árvores de Pinus elliottii Engelm., na região de Caçador, SC, para estudar a forma dos fustes das árvores de diferentes idades. Ao todo, 78 árvores, com idades de 10, 18 e 27 anos, foram abatidas, cubadas rigorosamente e tiveram os seus volumes obtidos por meio do método de Smalian. Os modelos de afilamento testados foram os Polinômios de 2º e de 5º Graus e o Polinômio de Potências Fracionárias de Hradetzky. A função de afilamento que apresentou melhor desempenho para estimar o diâmetro com e sem casca ao longo do fuste das árvores foram baseadas no Polinômio de Potências Fracionárias de Hradetzky, para as idades de 10, 18 e 27 anos. O Polinômio de 2º Grau propiciou as melhores estimativas de volume total com casca para as idades de 10 e 27 anos e de volume total sem casca para as idades de 18 e 27 anos. Já o Polinômio de Potências Fracionárias apresentou melhores estimativas de volume com casca para 18 anos e de volume sem casca para árvores de 10 anos. Os fustes das árvores de Pinus elliottii apresentam melhor forma nas idades mais avançadas. AbstractTaper models for Pinus elliottii, at different ages, in the region of Caçador - SC. The research aims to fit and select taper models in order to estimate diameters at different heights and total volumes, inside and outside bark, of Pinus elliottii Engelm. trees, in the region of Caçador - SC, Brazil, as well as to analyze  behavior of stem form for trees at different ages. Altogether, 78 trees at 10, 18 and 27 years of age, had been cut and their volumes obtained by Smalian method. The taper models tested were the 2nd and 5th Degree Polynomial and the Hradetzky Polynomial of Fractioned Potencies. The best performance taper function for estimate diameters inside and outside bark throughout the stem were based on the Hradetzky Polynomial of Fractioned Potencies, for 10, 18 and 27 years of age. The 2nd Degree Polynomial provided the best estimates of outside bark volume for 10 and 27 years of age, and of inside bark volume for 18 and 27 years of age, although the Hradetzky Polynomial presented the best estimates of outside bark volume for 18 years of age and of inside bark volume for 10 years old trees. The stems of the Pinus elliottii trees present better form for the oldest tress.Keywords: Polynomial models; profile models; stem form.


1990 ◽  
Vol 20 (2) ◽  
pp. 159-165 ◽  
Author(s):  
Brian W. Geils ◽  
William R. Jacobi

The comandra blister rust parasite (Cronartiumcomandrae Pk.) causes a serious canker disease of lodgepole pine (Pinuscontorta Dougl. ex Loud. ssp. latifolia (Engelm.) Critch.) in the central Rocky Mountains. The expansion, longevity, and distribution of comandra blister rust cankers were studied by annual monitoring, reconstructing canker histories, and random sampling. In saplings, infections occur throughout the lower 80% of the crown; and branch cankers expand toward the bole at 2.5 cm•year−1, regardless of temperature, age, position, tree size, vigor, or susceptibility to infection. The proportion of branch cankers that develop into stem cankers decreases logistically both with distance from infection site to bole and with time since infection. Fewer than 50% of branch cankers that are farther than 20 cm from the bole or more than 8 years old are expected to establish stem cankers. The proportion of branch cankers that become stem cankers decreases with distance more rapidly for comandra blister rust than for other stem rusts. The mean height of stem cankers increases with total tree height, but cankers are uncommon at the top of the crown and low on the trunk of larger trees. The number of years for a canker to girdle its host equals the diameter of the stem at the center of the canker measured in centimetres. Because girdling cankers develop infrequently, slowly, and predictably, potential losses from comandra blister rust can be reduced by timely and appropriate removal of damaged trees.


2018 ◽  
Vol 53 (10) ◽  
pp. 1109-1118
Author(s):  
Reginaldo Antonio Medeiros ◽  
Haroldo Nogueira de Paiva ◽  
Flávio Siqueira D’Ávila ◽  
Helio Garcia Leite

Abstract: The objective of this work was to evaluate the growth and yield of teak (Tectona grandis) stands at different spacing and in different soil classes. Twelve spacing were evaluated in an Inceptisol and Oxisol, in plots with an area of 1,505 or 1,548 m2, arranged in a completely randomized design with nine replicates. The teak trees were measured at 26, 42, 50, and 78 months of age. Total tree height was less affected by spacing. Mean square diameter was greater in wider spacing, whereas basal area and total volume with bark were greater in closer spacing. An increase in volume with bark per tree was observed with the increase of useful area per plant. For teak trees, growth stagnation happens earlier, the growth rate is higher in closer spacing, and the plants grow more in the Inceptisol than in the Oxisol.


2012 ◽  
Vol 64 (2) ◽  
pp. 605-611 ◽  
Author(s):  
M. Krstic ◽  
N. Stavretovic ◽  
V. Isajev ◽  
I. Bjelanovic

The study was carried out in Serbian spruce (Picea omorika Panc/Purkyn?) plantations in the western Serbia. The paper presents results of the analysis of crown development. The following elements were analyzed: total tree height, height of the crown base, absolute and relative crown length, maximal crown diameter, coefficient of crown spreading and degree of crown girth. We discuss approaches to the modeling of tree crown growth and development, growing under favorable environmental and stand conditions, without anomalies in development. In order to establish the relationship between analyzed factors, regression analyses were applied. Data fitting was by the analytic method, by the implementation of Prodan?s functions of growth, linear and parabolic function. Received models can be used for the simulation of various growth and developing processes in forest.


Sign in / Sign up

Export Citation Format

Share Document