scholarly journals Profilin promotes formin-mediated actin filament assembly and vesicle transport during polarity formation in pollen

2021 ◽  
Author(s):  
Chang Liu ◽  
Yi Zhang ◽  
Haiyun Ren
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Pollen Germination ◽  
Actin Polymerization ◽  
Vesicle Trafficking ◽  
Pollen Grains ◽  
Actin Assembly ◽  
Filament Assembly ◽  
Polarity Establishment

Abstract Pollen germination is critical for the reproduction of flowering plants. Formin-dependent actin polymerization plays vital roles in vesicle trafficking and polarity establishment during this process. However, how formin-mediated actin assembly is regulated in vivo remains poorly understood. Here, we investigated the function of reproductive profilin 4 and 5 (PRF4 and PRF5) in polarity establishment during pollen germination in Arabidopsis thaliana. Our data showed that the actin filament content was reduced in the prf4 prf5 double mutant and substantially increased in both PRF4- and PRF5-overexpressing pollen grains. By contrast, the positive effect of profilin in promoting actin polymerization was abolished in a formin mutant, atfh5. In addition, the interaction between Arabidopsis formin homology 5 (AtFH5) and actin filaments was attenuated and the trafficking of AtFH5-labeled vesicles was slowed in prf4 prf5 pollen grains. Formation of the collar-like structure at the germination pore was also defective in prf4 prf5 pollen grains as the fast assembly of actin filaments was impaired. Together, our results suggest that PRF4 and PRF5 regulate vesicle trafficking and polarity establishment during pollen germination by promoting AtFH5-mediated actin polymerization and enhancing the interaction between AtFH5 and actin filaments.

Actin Assembly Takes Off Like a Rocket!

2013 ◽  
Vol 21 (2) ◽  
pp. 8-9
Author(s):  
Stephen W. Carmichael ◽  
Jeffrey L. Salisbury
Keyword(s):  
Actin Filament ◽  
Eukaryotic Cells ◽  
Actin Assembly ◽  
Elongation Factors ◽  
Delicate Balance ◽  
Filament Assembly ◽  
Two Factors

Actin filament assembly occurs in all eukaryotic cells and involves a delicate balance between factors that promote assembly and factors that inhibit assembly. Filament assembly begins with a process of nucleation and then proceeds via elongation. Filament assembly in vivo requires nucleation and elongation factors to overcome barriers that could either bind actin monomers to inhibit nucleation or “cap” the ends of elongating filaments. The formation of most cellular actin structures depends on two or more such factors, which may interact directly. The interaction between two factors that initiate nucleation and promote assembly has recently been demonstrated by Dennis Breitsprecher, Richa Jaiswal, Jeffrey Bombardier, Christopher Gould, Jeff Gelles, and Bruce Goode. Interestingly, the model of these factors in action (Figure 1) resembles a rocket launcher!

scholarly journals Lamellipodin promotes actin assembly by clustering Ena/VASP proteins and tethering them to actin filaments

eLife ◽  
2015 ◽  
Vol 4 ◽  
Author(s):  
Scott D Hansen ◽  
R Dyche Mullins
Keyword(s):  
Axon Guidance ◽  
Actin Filaments ◽  
Network Formation ◽  
Focal Adhesions ◽  
Leading Edge ◽  
Polymerase Activity ◽  
Actin Assembly ◽  
Filament Assembly

Enabled/Vasodilator (Ena/VASP) proteins promote actin filament assembly at multiple locations, including: leading edge membranes, focal adhesions, and the surface of intracellular pathogens. One important Ena/VASP regulator is the mig-10/Lamellipodin/RIAM family of adaptors that promote lamellipod formation in fibroblasts and drive neurite outgrowth and axon guidance in neurons. To better understand how MRL proteins promote actin network formation we studied the interactions between Lamellipodin (Lpd), actin, and VASP, both in vivo and in vitro. We find that Lpd binds directly to actin filaments and that this interaction regulates its subcellular localization and enhances its effect on VASP polymerase activity. We propose that Lpd delivers Ena/VASP proteins to growing barbed ends and increases their polymerase activity by tethering them to filaments. This interaction represents one more pathway by which growing actin filaments produce positive feedback to control localization and activity of proteins that regulate their assembly.

scholarly journals Role of Tropomyosin in Formin-mediated Contractile Ring Assembly in Fission Yeast

2009 ◽  
Vol 20 (8) ◽  
pp. 2160-2173 ◽  
Author(s):  
Colleen T. Skau ◽  
Erin M. Neidt ◽  
David R. Kovar
Keyword(s):  
Fission Yeast ◽  
Actin Filament ◽  
Actin Filaments ◽  
Actin Polymerization ◽  
Actin Assembly ◽  
Animal Cells ◽  
Contractile Ring ◽  
Direct Role ◽  
Ring Assembly

Like animal cells, fission yeast divides by assembling actin filaments into a contractile ring. In addition to formin Cdc12p and profilin, the single tropomyosin isoform SpTm is required for contractile ring assembly. Cdc12p nucleates actin filaments and remains processively associated with the elongating barbed end while driving the addition of profilin-actin. SpTm is thought to stabilize mature filaments, but it is not known how SpTm localizes to the contractile ring and whether SpTm plays a direct role in Cdc12p-mediated actin polymerization. Using “bulk” and single actin filament assays, we discovered that Cdc12p can recruit SpTm to actin filaments and that SpTm has diverse effects on Cdc12p-mediated actin assembly. On its own, SpTm inhibits actin filament elongation and depolymerization. However, Cdc12p completely overcomes the combined inhibition of actin nucleation and barbed end elongation by profilin and SpTm. Furthermore, SpTm increases the length of Cdc12p-nucleated actin filaments by enhancing the elongation rate twofold and by allowing them to anneal end to end. In contrast, SpTm ultimately turns off Cdc12p-mediated elongation by “trapping” Cdc12p within annealed filaments or by dissociating Cdc12p from the barbed end. Therefore, SpTm makes multiple contributions to contractile ring assembly during and after actin polymerization.

scholarly journals Activation of the Arp2/3 Complex by the Actin Filament Binding Protein Abp1p

2001 ◽  
Vol 153 (3) ◽  
pp. 627-634 ◽  
Author(s):  
Bruce L. Goode ◽  
Avital A. Rodal ◽  
Georjana Barnes ◽  
David G. Drubin
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Mammalian Cells ◽  
Actin Assembly ◽  
Related Protein ◽  
Genetic Studies ◽  
Actin Networks ◽  
Specific Step

The actin-related protein (Arp) 2/3 complex plays a central role in assembly of actin networks. Because distinct actin-based structures mediate diverse processes, many proteins are likely to make spatially and temporally regulated interactions with the Arp2/3 complex. We have isolated a new activator, Abp1p, which associates tightly with the yeast Arp2/3 complex. Abp1p contains two acidic sequences (DDW) similar to those found in SCAR/WASp proteins. We demonstrate that mutation of these sequences abolishes Arp2/3 complex activation in vitro. Genetic studies indicate that this activity is important for Abp1p functions in vivo. In contrast to SCAR/WASp proteins, Abp1p binds specifically to actin filaments, not monomers. Actin filament binding is mediated by the ADF/cofilin homology (ADF-H) domain of Abp1p and is required for Arp2/3 complex activation in vitro. We demonstrate that Abp1p recruits Arp2/3 complex to the sides of filaments, suggesting a novel mechanism of activation. Studies in yeast and mammalian cells indicate that Abp1p is involved functionally in endocytosis. Based on these results, we speculate that Abp1p may link Arp2/3-mediated actin assembly to a specific step in endocytosis.

scholarly journals Direct electron microscopic visualization of barbed end capping and filament cutting by intestinal microvillar 95-kdalton protein (villin): a new actin assembly assay using the limulus acrosomal process

1983 ◽  
Vol 96 (4) ◽  
pp. 1097-1107 ◽  
Author(s):  
EM Bonder ◽  
MS Mooseker
Keyword(s):  
Actin Filament ◽  
Actin Filaments ◽  
Initial Rate ◽  
Potent Inhibitor ◽  
Actin Assembly ◽  
Electron Microscopic ◽  
Filament Assembly ◽  
Large Numbers ◽  
End Capping ◽  
Dependent Interaction

We have re-examined the Ca(++)-dependent interaction of an intestinal microvillar 95- kdalton protein (MV-95K) and actin using the isolated acrosomal process bundles from limulus sperm. Making use of the processes as nuclei for assembling actin filaments, we quantitatively and qualitatively examined MV-95K's effect on filament assembly and on F- actin, both in the presence and in the absence of Ca(++). The acrosomal processes are particularly advantageous for this approach because they nucleate large numbers of filaments, they are extremely stable, and their morphology can be used to determine the polarity of any nucleated filaments. When filament nucleation was initiated in the presence of MV-95K and the absence of Ca(++), there was biased filament assembly from the bundle ends. The calculated elongation rates from both the barbed and pointed filament ends were virtually indistinguishable from control preparations. In the presence of Ca(++), MV-95K completely inhibited filament assembly from the barbed filament end without affecting the initial rate of assembly from the pointed filament end. The inhibition of assembly results from MV-95K binding to and capping the barbed filament end, thereby preventing monomer addition. This indicates that, while MV-95K is a potent nucleator of actin assembly, it is also a potent inhibitor of actin filament elongation. To examine the effects of MV-95K on F-actin in the presence of Ca(++), we developed an assay where MV-95K is added to filaments previously assembled from acrosomal processes without causing filament breakage during mixing. These results clearly demonstrated that rapid filament shortening by MV-95K results through a mechanism of disrupting intrafilament monomer-monomer interactions. Finally, we show that tropomyosin-containing actin filaments are insensitive to cutting, but not to capping, by MV-95K in the presence of Ca(++).

scholarly journals Nucleation of polar actin filament assembly by a positively charged surface.

1979 ◽  
Vol 80 (2) ◽  
pp. 499-504 ◽  
Author(s):  
S S Brown ◽  
J A Spudich
Keyword(s):  
Electron Microscopy ◽  
Actin Filament ◽  
Actin Filaments ◽  
Charged Surface ◽  
Actin Assembly ◽  
Filamentous Form ◽  
Filament Assembly ◽  
Biochemical Assays ◽  
Positively Charged

Polylysine-coated polystyrene beads can nucleate polar assembly of monomeric actin into filamentous form. This nucleation has been demonstrated by a combination of biochemical and structural experiments. The polylysine-coated beads accelerate the rate of actin assembly as detected by two different biochemical assays. Subsequent examination of the beads by electron microscopy reveals numerous actin filaments of similar length radiating from the beads. ATP promotes this bead-induced acceleration of assembly. Decoration of the filaments with the myosin fragment S1 shows that these filaments all have the same polarity, with the arrowhead pattern pointing toward the bead. The relevance of the system to in vitro mechanisms and its usefulness in other studies are discussed.

scholarly journals A Conserved Mechanism for Bni1- and mDia1-induced Actin Assembly and Dual Regulation of Bni1 by Bud6 and Profilin

2004 ◽  
Vol 15 (2) ◽  
pp. 896-907 ◽  
Author(s):  
James B. Moseley ◽  
Isabelle Sagot ◽  
Amity L. Manning ◽  
Yingwu Xu ◽  
Michael J. Eck ◽  
...  
Keyword(s):  
Cell Polarity ◽  
Actin Filament ◽  
Genetic Interaction ◽  
Actin Assembly ◽  
Nucleotide Exchange ◽  
Synthetic Lethal ◽  
Capping Protein ◽  
Filament Assembly ◽  
Species Specific

Formins have conserved roles in cell polarity and cytokinesis and directly nucleate actin filament assembly through their FH2 domain. Here, we define the active region of the yeast formin Bni1 FH2 domain and show that it dimerizes. Mutations that disrupt dimerization abolish actin assembly activity, suggesting that dimers are the active state of FH2 domains. The Bni1 FH2 domain protects growing barbed ends of actin filaments from vast excesses of capping protein, suggesting that the dimer maintains a persistent association during elongation. This is not a species-specific mechanism, as the activities of purified mammalian formin mDia1 are identical to those of Bni1. Further, mDia1 partially complements BNI1 function in vivo, and expression of a dominant active mDia1 construct in yeast causes similar phenotypes to dominant active Bni1 constructs. In addition, we purified the Bni1-interacting half of the cell polarity factor Bud6 and found that it binds specifically to actin monomers and, like profilin, promotes rapid nucleotide exchange on actin. Bud6 and profilin show additive stimulatory effects on Bni1 activity and have a synthetic lethal genetic interaction in vivo. From these results, we propose a model in which Bni1 FH2 dimers nucleate and processively cap the elongating barbed end of the actin filament, and Bud6 and profilin generate a local flux of ATP-actin monomers to promote actin assembly.

scholarly journals Loss of Aip1 reveals a role in maintaining the actin monomer pool and an in vivo oligomer assembly pathway

2010 ◽  
Vol 188 (6) ◽  
pp. 769-777 ◽  
Author(s):  
Voytek Okreglak ◽  
David G. Drubin
Keyword(s):  
Actin Filament ◽  
Monomer Concentration ◽  
Actin Assembly ◽  
Actin Monomer ◽  
Filament Assembly ◽  
Assembly Pathway ◽  
Latrunculin A ◽  
Mutant Cells

Although actin filaments can form by oligomer annealing in vitro, they are assumed to assemble exclusively from actin monomers in vivo. In this study, we show that a pool of actin resistant to the monomer-sequestering drug latrunculin A (lat A) contributes to filament assembly in vivo. Furthermore, we show that the cofilin accessory protein Aip1 is important for establishment of normal actin monomer concentration in cells and efficiently converts cofilin-generated actin filament disassembly products into monomers and short oligomers in vitro. Additionally, in aip1Δ mutant cells, lat A–insensitive actin assembly is significantly enhanced. We conclude that actin oligomer annealing is a physiologically relevant actin filament assembly pathway in vivo and identify Aip1 as a crucial factor for shifting the distribution of short actin oligomers toward monomers during disassembly.

scholarly journals Actin filaments in yeast are unstable in the absence of capping protein or fimbrin.

1995 ◽  
Vol 131 (6) ◽  
pp. 1483-1493 ◽  
Author(s):  
T S Karpova ◽  
K Tatchell ◽  
J A Cooper
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Actin Filament ◽  
Actin Filaments ◽  
Binding Proteins ◽  
Actin Binding ◽  
Actin Binding Proteins ◽  
Capping Protein ◽  
Filament Assembly

Many actin-binding proteins affect filament assembly in vitro and localize with actin in vivo, but how their molecular actions contribute to filament assembly in vivo is not understood well. We report here that capping protein (CP) and fimbrin are both important for actin filament assembly in vivo in Saccharomyces cerevisiae, based on finding decreased actin filament assembly in CP and fimbrin mutants. We have also identified mutations in actin that enhance the CP phenotype and find that those mutants also have decreased actin filament assembly in vivo. In vitro, actin purified from some of these mutants is defective in polymerization or binding fimbrin. These findings support the conclusion that CP acts to stabilize actin filaments in vivo. This conclusion is particularly remarkable because it is the opposite of the conclusion drawn from recent studies in Dictyostelium (Hug, C., P.Y. Jay, I. Reddy, J.G. McNally, P.C. Bridgman, E.L. Elson, and J.A. Cooper. 1995. Cell. 81:591-600). In addition, we find that the unpolymerized pool of actin in yeast is very small relative to that found in higher cells, which suggests that actin filament assembly is less dynamic in yeast than higher cells.

Sign in / Sign up

Export Citation Format

Share Document