scholarly journals The ultrastructure of the nictitating membrane of the little penguin (Eudyptula minor, Aves)

2021 ◽  
Author(s):  
Shaun P Collin ◽  
H Barry Collin
Keyword(s):  
Electron Microscopy ◽  
Leading Edge ◽  
Nictitating Membrane ◽  
Direction Parallel ◽  
Thin Sections ◽  
Surface Ultrastructure ◽  
Transmission Electron ◽  
Clear Vision ◽  
Electron Microscopes ◽  
Little Penguin

Abstract The ultrastructure of the nictitating membrane in the little penguin Eudyptula minor was studied using both scanning and transmission electron microscopy to improve our understanding of the function of ocular adnexa in diving birds. Following euthanasia, eyes were enucleated and immersion fixed in Karnovsky's fixative. The nictitating membrane and conjunctiva were embedded in araldite and semi- or ultra-thin sections were stained and photographed using compound and transmission electron microscopes, respectively. Ultrastructural dimensions were measured directly from digital photographs. Surface ultrastructure was examined using scanning electron microscopy. The transparent nictitating membrane consists of a dense stroma surrounded by epithelia on both the external (conjunctival) and internal (bulbar) surfaces. The conjunctival surface of the membrane near the leading edge is covered by microvilli, which transition to microplicae and finally to microridges in the periphery. Beneath the epithelial cells, there is a well-developed basement membrane. Scattered throughout this epithelium are a few goblet cells. The surface of the bulbar epithelium is covered by microvilli near the leading edge, which become denser peripherally. The stroma consists of densely-packed collagen fibrils, which are randomly oriented in bundles near the leading edge but are aligned in the same direction parallel with the epithelial and corneal surfaces and with the leading edge, when the membrane is extended. The ultrastructure of the nictitating membrane in the little penguin differs from other birds and its function is predominantly protective, while preserving clear vision in both water and air.

Two- or three-way observations of the identical cell elements within the same sections by LM, TEM and/or SEM

1978 ◽  
Vol 36 (2) ◽  
pp. 82-83 ◽  
Author(s):  
Nakazo Watari ◽  
Yasuaki Hotta ◽  
Yoshio Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Fine Structure ◽  
Light Microscopy ◽  
Thin Sections ◽  
Transmission Electron ◽  
Identical Cell ◽  
Electron Microscopes ◽  
Scanning Electron

It is very useful if we can observe the identical cell elements within the same sections by light microscopy (LM), transmission electron microscopy (TEM) and/or scanning electron microscopy (SEM) sequentially, because, the cell fine structure can not be indicated by LM, while the color is; on the other hand, the cell fine structure can be very easily observed by EM, although its color properties may not. However, there is one problem in that LM requires thick sections of over 1 μm, while EM needs very thin sections of under 100 nm. Recently, we have developed a new method to observe the same cell elements within the same plastic sections using both light and transmission (conventional or high-voltage) electron microscopes.In this paper, we have developed two new observation methods for the identical cell elements within the same sections, both plastic-embedded and paraffin-embedded, using light microscopy, transmission electron microscopy and/or scanning electron microscopy (Fig. 1).

Some early history of replica techniques for electron microscopy

1992 ◽  
Vol 50 (2) ◽  
pp. 1076-1077
Author(s):  
Robert M. Fisher
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Optical Microscope ◽  
Early History ◽  
Bulk Materials ◽  
Thin Sections ◽  
Transmission Electron ◽  
Reflected Light ◽  
History Of ◽  
Electron Microscopes

By 1940, a half dozen or so commercial or home-built transmission electron microscopes were in use for studies of the ultrastructure of matter. These operated at 30-60 kV and most pioneering microscopists were preoccupied with their search for electron transparent substrates to support dispersions of particulates or bacteria for TEM examination and did not contemplate studies of bulk materials. Metallurgist H. Mahl and other physical scientists, accustomed to examining etched, deformed or machined specimens by reflected light in the optical microscope, were also highly motivated to capitalize on the superior resolution of the electron microscope. Mahl originated several methods of preparing thin oxide or lacquer impressions of surfaces that were transparent in his 50 kV TEM. The utility of replication was recognized immediately and many variations on the theme, including two-step negative-positive replicas, soon appeared. Intense development of replica techniques slowed after 1955 but important advances still occur. The availability of 100 kV instruments, advent of thin film methods for metals and ceramics and microtoming of thin sections for biological specimens largely eliminated any need to resort to replicas.

Dislocations in alumina deformed by prismatic slip

1978 ◽  
Vol 36 (1) ◽  
pp. 606-607
Author(s):  
J. Cadoz ◽  
J. Castaing ◽  
J. Philibert
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Basal Slip ◽  
Prismatic Slip ◽  
Compression Tests ◽  
Thin Sections ◽  
Burgers Vector ◽  
Maximum Deformation ◽  
Transmission Electron ◽  
Mechanical Thinning

Plastic deformation of alumina has been much studied; basal slip occurs and dislocation structures have been investigated by transmission electron microscopy (T.E.M.) (1). Non basal slip has been observed (2); the prismatic glide system <1010> {1210} has been obtained by compression tests between 1400°C and 1800°C (3). Dislocations with <0110> burgers vector were identified using a 100 kV microscope(4).We describe the dislocation structures after prismatic slip, using high voltage T.E.M. which gives much information.Compression tests were performed at constant strainrate (∿10-4s-1); the maximum deformation reached was 0.03. Thin sections were cut from specimens deformed at 1450°C, either parallel to the glide plane or perpendicular to the glide direction. After mechanical thinning, foils were produced by ion bombardment. Details on experimental techniques can be obtained through reference (3).

Remote On-Line Control of a High-Voltage in situ Transmission Electron Microscope with A Rational User Interface

1996 ◽  
Vol 54 ◽  
pp. 384-385
Author(s):  
M.A. O’Keefe ◽  
J. Taylor ◽  
D. Owen ◽  
B. Crowley ◽  
K.H. Westmacott ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
User Interface ◽  
Transmission Electron Microscope ◽  
High Voltage ◽  
Materials Science ◽  
Transmission Electron ◽  
On Line ◽  
Electron Microscopes

Remote on-line electron microscopy is rapidly becoming more available as improvements continue to be developed in the software and hardware of interfaces and networks. Scanning electron microscopes have been driven remotely across both wide and local area networks. Initial implementations with transmission electron microscopes have targeted unique facilities like an advanced analytical electron microscope, a biological 3-D IVEM and a HVEM capable of in situ materials science applications. As implementations of on-line transmission electron microscopy become more widespread, it is essential that suitable standards be developed and followed. Two such standards have been proposed for a high-level protocol language for on-line access, and we have proposed a rational graphical user interface. The user interface we present here is based on experience gained with a full-function materials science application providing users of the National Center for Electron Microscopy with remote on-line access to a 1.5MeV Kratos EM-1500 in situ high-voltage transmission electron microscope via existing wide area networks. We have developed and implemented, and are continuing to refine, a set of tools, protocols, and interfaces to run the Kratos EM-1500 on-line for collaborative research. Computer tools for capturing and manipulating real-time video signals are integrated into a standardized user interface that may be used for remote access to any transmission electron microscope equipped with a suitable control computer.

Methods to Monitor and Improve the Performance of Specimen Holders for Transmission Electron Cryomicroscopy

1996 ◽  
Vol 54 ◽  
pp. 454-455
Author(s):  
B. L. Armbruster ◽  
B. Kraus ◽  
M. Pan
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Electron Beam Irradiation ◽  
Beam Irradiation ◽  
Quality Of Data ◽  
Electron Cryomicroscopy ◽  
Thermal Equilibration ◽  
Transmission Electron ◽  
Electron Microscopes

One goal in electron microscopy of biological specimens is to improve the quality of data to equal the resolution capabilities of modem transmission electron microscopes. Radiation damage and beam- induced movement caused by charging of the sample, low image contrast at high resolution, and sensitivity to external vibration and drift in side entry specimen holders limit the effective resolution one can achieve. Several methods have been developed to address these limitations: cryomethods are widely employed to preserve and stabilize specimens against some of the adverse effects of the vacuum and electron beam irradiation, spot-scan imaging reduces charging and associated beam-induced movement, and energy-filtered imaging removes the “fog” caused by inelastic scattering of electrons which is particularly pronounced in thick specimens.Although most cryoholders can easily achieve a 3.4Å resolution specification, information perpendicular to the goniometer axis may be degraded due to vibration. Absolute drift after mechanical and thermal equilibration as well as drift after movement of a holder may cause loss of resolution in any direction.

Dislocations and stacking faults in stainless steel

1957 ◽  
Vol 240 (1223) ◽  
pp. 524-538 ◽  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Stainless Steel ◽  
Grain Boundaries ◽  
Stacking Faults ◽  
Stacking Fault ◽  
Stacking Fault Energy ◽  
Thin Sections ◽  
Partial Dislocations ◽  
Transmission Electron

Further experiments by transmission electron microscopy on thin sections of stainless steel deformed by small amounts have enabled extended dislocations to be observed directly. The arrangement and motion of whole and partial dislocations have been followed in detail. Many of the dislocations are found to have piled up against grain boundaries. Other observations include the formation of wide stacking faults, the interaction of dislocations with twin boundaries, and the formation of dislocations at thin edges of the foils. An estimate is made of the stacking-fault energy from a consideration of the stresses present, and the properties of the dislocations are found to be in agreement with those expected from a metal of low stacking-fault energy.

The Crystal Structure of the β’-Phase Including Ag in Al-Mg-Si-Ag Alloy

2011 ◽  
Vol 409 ◽  
pp. 67-70 ◽  
Author(s):  
Junya Nakamura ◽  
Kenji Matsuda ◽  
Tatsuo Sato ◽  
Calin D. Marioara ◽  
Sigmund J. Andersen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Unit Cell ◽  
Atomic Column ◽  
Direction Parallel ◽  
Ag Addition ◽  
Domain Structures ◽  
Β Phase ◽  
Transmission Electron

In the present work, b’ phase in alloys Al -1.0 mass% Mg2Si -0.5 mass% Ag (Ag-addition) and Al -1.0 mass% Mg2Si (base) was investigated by high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) to understand the effect of Ag addition. The b’ phase is rod-shape with the longest direction parallel to <001>Al. HRTEM images and SAED patterns obtained along the direction were similar for the b’ phase in both alloys. The unit cell of b’-phase in Ag-addition alloy is hexagonal with the same c-axis dimension as the Ag-free b’, but shorter a-axis. Ag was found in the composition of the rod-shaped precipitates in Ag-addition alloy by energy dispersive X-ray spectroscopy (EDS). In addition, the distribution of Ag was investigated by energy filtered mapping and high annular angular dark field scanning transmission electron microscopy (HAADF-STEM). The Ag-containing atomic column was observed in every b’ unit cell, and the unit cell symmetry is slightly changed as compared with the Ag-free b’. The Ag-containing b’ rods have complicated domain structures. The interfaces of these particles are enriched with Ag atoms that occupy the lattice positions in the Al matrix. The occupancy of the Ag-containing atomic columns seem to vary both inside particles, as well as at the interfaces.

Ultrastructure of the Tertiary Envelope of the Cyst of the Tadpole Shrimp Triops longicaudatus (Branchiopoda; Notostraca)

2000 ◽  
Vol 6 (S2) ◽  
pp. 872-873
Author(s):  
James R. Rosowski ◽  
Terry L. Bartels ◽  
James F. Colburn ◽  
Jannell L. Colton ◽  
Denton Belk ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fairy Shrimp ◽  
Distilled Water ◽  
Thin Sections ◽  
Rainfall Events ◽  
Transmission Electron ◽  
Tadpole Shrimp ◽  
Species Specific ◽  
Scanning Electron

Tadpole shrimp inhabit temporary freshwater pools and ponds where their occurrence is largely regulated by rainfall events and water temperature. When dry basins are flooded, cysts of Triops imbibe water and hatch to produce rapidly growing, carapaced larvae. While previous studies show anostracan (fairy shrimp) cyst-surface morphology often species specific, few studies illustrate shell ultrastructure of Triops and none has considered T. longicaudatus. Here we examine the shell of T. longicaudatus (Notostraca) and compare its fine structure to other species of Triops and to that of Artemiafranciscana(Anostraca), which we previously studied.Cysts, produced in culture from Utah broodstock, were purchased from Triops, Inc., 1924 Creighton Rd., Pensacola, FL 32504. Thin sections of cysts were prepared for transmission electron microscopy (TEM) as previously described (Fig. 1). Cysts were also examined with scanning electron microscopy (SEM), dry, whole or fractured (Figs. 2,3), or after imbibition and/or hatching in oxygen saturated, double-distilled water, at 25 ° C.

Neoformation of halloysite on volcanic glass in a marine environment

Clay Minerals ◽  
1987 ◽  
Vol 22 (2) ◽  
pp. 179-185 ◽  
Author(s):  
T. Imbert ◽  
A. Desprairies
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Marine Environment ◽  
Experimental Studies ◽  
Volcanic Glass ◽  
Marine Environments ◽  
Thin Sections ◽  
Transmission Electron ◽  
Glass Shards

AbstractTransmission electron microscopy of ultramicrotomed thin-sections of Pleistocene and Eocene glass shards revealed the neoformation of (i) illite and (ii) halloysite at the glass periphery. According to previous experimental studies, halloysite neoformation in marine environments can occur on glass shards deposited in Si-rich sediments; an excess of Ca tends to inhibit the reaction.

Sign in / Sign up

Export Citation Format

Share Document