Development and Validation of Two New Methods for the Determination of Rilmenidine in Bulk and Pharmaceutical Preparation

Author(s):  
Elif Özdemir ◽  
Gamze Ergin Kizilçay ◽  
Sıdıka Ertürk Toker

Abstract In the present study, two new methods were developed and validated for the determination of rilmenidine in bulk and pharmaceutical preparation. Both methods are based on a derivatization reaction using 4-chloro-7-nitro-1,2,3-benzoxadiazole (NBD-Cl) as a fluorogenic substance. The drug reagent derivatives were formed by the reaction of rilmenidine with NBD-Cl at pH 9.0 at 70°C for 40 min. The reaction mixtures were analyzed by spectrofluorimetry in the first method and high performance liquid chromatography (HPLC) in the second method. Derivatives were determined at λex 493 nm and at λem 536 nm in the spectrofluorimetric method. The separation was performed place on a Phenomenex, C18 column (250 × 4.6 mm, 5 μm i.d) using a mobile phase comprising 0.2% formic acid and acetonitrile gradient elution mode in the HPLC method. Analytes were detected by a fluorescence detector at the same wavelength. The methods were validated for limit of quantitation, linearity, robustness, recovery, limit of detection, precision and accuracy. Calibration curves for the first and second methods were found to be linear in the range of 2.0–12.0 and 250–2000 ng/mL, respectively. Detection limits for the spectrofluorimetric and HPLC methods were calculated as 0.16 and 18.28 ng/mL, respectively. The validated methods were applied successfully to the determination of rilmenidine in bulk and pharmaceutical preparation.

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Soad S. Abd El-Hay ◽  
Mostafa S. Mohram

A simple and robust high-performance liquid chromatography (HPLC) method is described for the assay for levetiracetam (LTC), methyl paraben (MHB), and propyl paraben (PHB) either in their pure form or in commercial Levepsy® syrup. The method is selective and stability indicating and all chromatographic conditions were studied to obtain adequate separation of LTC, MHB, and PHB from their degradation products and from excipients. The HPLC separation was carried out on a RP C18 Hypersil BDS analytical column (150 mm × 4.6 mm ID) using gradient elution system. The mobile phase flow rate was 1.5 mLmin−1 and the column temperature was kept at 40°C. Complete separation of the studied components was obtained within a cycle time of 8 min. LTC, MHB, and PHB were eluted at 1.56, 5.86, and 7.85 min, respectively. Detection was carried out at 240 nm using a dual wavelength detector. The method has been validated for linearity, accuracy, precision, specificity, limit of detection, limit of quantitation, robustness, and ruggedness. The proposed method was successfully applied for the determination of LTC in the presence of parabens in Levepsy syrup.


Author(s):  
Narendra M. Gowekar ◽  
Shailesh J Wadher

  Objective: A simple, specific, accurate, and precise method, namely, reverse phase high-performance liquid chromatography was to develop for simultaneous estimation of Lidocaine (LDC) and prilocaine (PLC) in a topical local anesthetic cream.Method: The mixture of PLC and LDC was separated on Hi Q Sil C18 HS column, (250 mm × 4.6 mm, 5 μm), column temperature ambient and flow rate 1.2 mL/minutes. The mobile phase was acetonitrile: 0.01 M diethylamine solution (pH adjusts to 6.8 with orthophosphoric acid) (60:40) with detection at 225 nm.Results: The retention time was found to be 6.075±0.12 minutes for PLC and 8.642±0.15 minutes for LDC, respectively. Linearity was observed in the concentration range of 1-6 μg/mL for both LDC and PLC, respectively. The method was validated according to International Conference on Harmonization guideline and values of linearity, precision, robustness, limit of detection, limit of quantitation, selectivity, and recovery were found to be in good accordance with the prescribed value.Conclusion: The proposed method can be useful in the quality control of LDC and PLC in their topical formulation.


2017 ◽  
Vol 9 (2) ◽  
pp. 34
Author(s):  
N. Balaji ◽  
Sayeeda Sultana

Objective: An efficient, high performance liquid chromatographic method has been developed and validated for the quantification of related substances in pioglitazone hydrochloride drug substance.Methods: This method includes the determination of three related substances in pioglitazone hydrochloride. The mobile phase A is 0.1% w/v triethylamine in water with pH 2.5 adjusted by dilute phosphoric acid. The mobile phase B is premixed and degassed mixtures of acetonitrile and methanol. The flow rate was 1 ml/min. The elution used was gradient mode. The HPLC column used for the analysis was symmetry C18 with a length of 250 mm, the internal diameter of 4.6 mm and particle size of 5.0 microns.Results: The developed method was found to be linear with the range of 0.006-250% with a coefficient of correlation 0.99. The precision study revealed that the percentage relative standard deviation was within the acceptable limit. The limit of detection and limit of quantitation of the impurities was less than 0.002%and 0.006% with respect to pioglitazone hydrochloride test concentration of 2000 µg/ml respectively. This method has been validated as per ICH guidelines Q2 (R1).Conclusion: A reliable, economical HPLC method was magnificently established for quantitative analysis of related substances of pioglitazone hydrochloride drug substance.


2007 ◽  
Vol 90 (3) ◽  
pp. 720-724
Author(s):  
Sevgi Tatar Ulu

Abstract A sensitive and selective high-performance liquid chromatographic method has been developed for the determination of tianeptine (Tia) in tablets. The method is based on derivatization of Tia with 4-chloro-7-nitrobenzofurazan (NBD-Cl). A mobile phase consisting of acetonitrile10 mM orthophosphoric acid (pH 2.5; 77 + 23) was used at a flow rate of 1 mL/min on a C18 column. The Tia-NBD derivative was monitored using a fluorescence detector, with emission set at 520 nm and excitation at 458 nm. Gabapentin was selected as an internal standard. Linear calibration graphs were obtained in the concentration range of 45300 ng/mL. The lower limit of detection (LOD) was 10 ng/mL at a signal-to-noise ratio of 4. The lower limit of quantitation (LOQ) was 45 ng/mL. The relative standard values for intra- and interday precision were <0.46 and <0.57%, respectively. The recovery of the drug samples ranged between 98.89 and 99.85%. No chromatographic interference from the tablet excipients was found. The proposed method was validated in terms of precision, robustness, recovery, LOD, and LOQ. All the validation parameters were within the acceptance range. The proposed method was applied for the determination of Tia in commercially available tablets. The results were compared with those obtained by an ultraviolet spectrophotometric method using t- and F-tests.


2019 ◽  
Vol 38 (2) ◽  
pp. 161
Author(s):  
Elif Mine Oncu Kaya

A sensitive Ultra-High Performance Liquid Chromatography (UHPLC)-fluorescence method was developed and validated for the determination of ochratoxin-A (OTA) in Turkish wine samples. Naphthalene was used as an internal standard in this study. OTA was separated on a C18 (3.0 mm × 100 mm × 1.8 µm) column and analyses were run under isocratic conditions, with a mobile phase consisting of water/acetonitrile/acetic acid (50:50:1, v/v/v). The flow rate and injection volume were 0.5 ml min−1 and 10 μl, respectively. The excitation and emission wavelengths were 330 nm and 460 nm for OTA, respectively, and 220 nm and 325 nm for internal standard, respectively. A solid-phase extraction (SPE) clean-up procedure on a C18 cartridge was used prior to the analysis of the wine samples by UHPLC. The developed method was validated with respect to linearity, precision, accuracy, limit of detection (LOD), limit of quantitation (LOQ), stability and robustness. The method presented good RSD (< 4 %) and recovery (102.6–105.2 %) values. The LOD and LOQ values were 0.01 ng ml–1 and 0.05 ng ml–1, respectively. All other parameters were acceptable. OTA amounts were found in the range of 2.72‒7.40 µg kg‒1 in the Turkish wine samples.


2020 ◽  
Vol 59 (1) ◽  
pp. 15-22
Author(s):  
Noha Rashed ◽  
Sahar Zayed ◽  
Fatma Fouad ◽  
Amany Abdelazeem

Abstract A novel, sensitive and rapid high performance liquid chromatography (HPLC) method for the determination of ceftiofur by pre-column derivatization with 1,2-naphthoquinone-4-sulfonate. Analysis was performed within 5 min on a Kinetex C18 column based on core-shell technology. The mobile phase composed of acetonitrile-water (50:50, v/v) pumped isocratically at a flow rate of 1.0 mL/min under UV detection at 254 nm. The factors affecting the derivatization reaction and separation conditions were carefully evaluated and optimized. The method was linear over the concentration range of 45–450 ng/mL with a limit of detection of 3.29 ng/mL and limit of quantitation of 10.97 ng/mL. The new method was successfully applied for the analysis of ceftiofur in the veterinary formulation and honey with average recoveries of 100.78% and 98. 83%, respectively. The present method is suitable and favorable for the analysis of ceftiofur on account of its sensitivity, rapidity and cost-effectiveness. In addition, it could have significant application for the determination of ceftiofur in other food products.


2010 ◽  
Vol 7 (2) ◽  
pp. 569-577 ◽  
Author(s):  
Uma Mahesh Karra ◽  
Sanjeeva Yarkala

A simple and rapid reverse phase high performance liquid chromatography (RP-HPLC) method was developed and validated for quantitative determination of rabeprazole in bulk drug samples and formulations. Rabeprazole was analyzed by using reverse phase LC-GC column (Inertsil ODS, 4.6 mm x 25 cm, 5 microns), with mobile phase consisting of methanol: water (78:22 v/v). The flow rate was set 1.0 mL/min and analysis was performed at wavelength 288 nm using Photo Diode Array (PDA) detector at ambient temperature. The method was validated and stability studies were conducted under different conditions. The retention time for rabeprazole was around 4.12 minutes. The calibration curves were linear (r≥0.9998) over a concentration range from 20.0 to 80.0 μg/mL. Limit of detection (LOD) and Limit of quantitation (LOQ) were 8 ng/mL and 24 ng/mL respectively. The developed method was successfully applied to estimate the amount of rabeprazole in tablet formulations.


2021 ◽  
Vol 11 (2) ◽  
pp. 153-163
Author(s):  
Abhiram Dash ◽  
Neelu Jain ◽  
Harish Pandey

The objective of this research was to develop and validate a simple, specific and accurate reverse phase of high performance of liquid chromatographic method for the determination of levonorgestrel (LVG) and ethinylestradiol (EE) in tablets. The chromatographic system included column Sun Fire ODS (150 mm × 4.6 mm i.d., particle size at 5 μm), mobile phase consisting of acetonitrile: methanol: aquabidest (60:15:25) with the flow rate of 1 mL/minute and effluents monitored at 230 nm. The validation of RP HPLC method for the simultaneous determination of LVG and EE was determined by accuracy, precision, linearity, and limit of detection (LOD) as well as the limit of quantitation (LOQ) parameters. The linearity range of both drugs was 1-70 µg/mL and 2-14 µg/mL for LVG and EE, respectively. The recoveries of LVG and EE were at 101.78% and 102.44% with the coefficients of variation of 0.94% and 1.92%, successively. The LOD of LVG and EE value were of 0.84 µg/mL and 0.03 µg/mL, and LOQ value were of 2.79 and 0.09µg/mL, respectively. Keywords: Levonorgestrel (LVG), Ethinylestradiol, Method Validation, Method Validation, HPLC


2020 ◽  
Vol 13 (2) ◽  
pp. 60-70
Author(s):  
Harsha Dhurve ◽  
Yasmini Parshuramkar ◽  
Milind Umekar ◽  
Krishna Gupta

A new, simple, specific and economic UV Spectrophotometric method and HPLC method for the estimation of Dofetilide content in bulk and laboratory prepared mixture. UV spectrophotometric detection was carried out at absorption maxima (λmax) at 231nm using methanol as a solvent. The quantitation of drug was carried out using A1% 1cm at 231nm and Beer’s law was obeyed in the concentration range of 2.5-20 μg/ml, with correlation coefficient value less than 1.The chromatographic separation was carried on a C-18 (250 mm × 4.6 mm, 5μ) column using an isocratic mode with a mixture of Acetonitrile:Phosphate Buffer (pH-7) in the ratio of 55:45% v/v as a mobile phase. The flow rate was 1.5ml/min, temperature is maintained at ambient and detection was made at 231 nm using Photodiode array (PDA) detector. The developed method was validated according to ICH guidelines and different analytical parameters such as linearity, precision, accuracy, specificity, limit of detection, limit of quantitation were determined. The percent amount of drug estimated was nearly 100%, found to be a good agreement with label claim of prepared laboratory mixture. The proposed method was validated for its accuracy, precision, robustness, ruggedness, linearity, limit of detection, limit of quantitation and was found to be in range (% RSD<2.0 and SD <±2.0). Both methods were validated and found to be simple, sensitive, accurate, and precise. The results of the study and statistical data proved the applicability of the present method in routine analysis of Dofetilide in bulk as well as laboratory prepared mixture.


2017 ◽  
Vol 9 (6) ◽  
pp. 54 ◽  
Author(s):  
Yuliya Kondratova ◽  
Liliya Logoyda ◽  
Yuliia Voloshko ◽  
Ahmed Abdel Megied ◽  
Dmytro Korobko ◽  
...  

Objective: A rapid, simple and sensitive RP-HPLC method was developed and validated for the determination of bisoprolol fumarate in bulk and pharmaceutical dosage form.Methods: Chromatographic separation was achieved within 2.5 min on ACQUITY Arc System, Waters Symmetry C18 column (3.9 mm i.d. X 150 mm, 5 μm particle sizes) using a mobile phase consisted of acetonitrile: phosphate buffer (25:75 v/v) in an isocratic mode at a flow rate of 1.4 ml/min. The pH of the mobile phase was adjusted to 7.0 with orthophosphoric acid and UV detection was set at 226 nm.Results: The retention time for bisoprolol fumarate was found to be 2.09 min. The proposed method was validated according to ICH guidelines with respect to linearity, specificity precision, accuracy and robustness. The limit of detection and limit of quantification are calculated and found to be 0.4825 and 1.4621 μg/ml; respectively.Conclusion: The proposed method can help research studies, quality control and routine analysis with lesser resources available. The results of the assay of pharmaceutical formulation of the developed method are highly reliable and reproducible and is in good agreement with the label claim of the medicines.Keywords: Bisoprolol, High-Performance Liquid Chromatography, Validation, ICH guidelines


Sign in / Sign up

Export Citation Format

Share Document