scholarly journals STUDIES ON PENETRATION OF DYES WITH GLASS ELECTRODE

1930 ◽  
Vol 14 (1) ◽  
pp. 1-17 ◽  
Author(s):  
Marian Irwin
Keyword(s):  
Ph Value ◽  
Glass Electrode ◽  
Free Base ◽  
Cresyl Blue

Glass electrode measurements of the pH value of the sap of Nitella show that cresyl blue in form of free base penetrates the vacuoles and raises pH value of the sap to about the same degree as the free base of the dye added to the sap in vitro, while the dye salt dissolved in the sap does not alter its pH value. It is proved conclusively that the increase in the pH value of the sap is due only to the presence of the dye and not to some other alkaline substance. Spectrophotometric measurements show that the dye which penetrates the vacuole is chiefly cresyl blue. When the protoplasm is squeezed into the sap, the pH value of the sap is higher than that of the pure sap. Such a mixture behaves very much like the sap in respect to the dye.

scholarly journals STUDIES ON PENETRATION OF DYES WITH GLASS ELECTRODE

1930 ◽  
Vol 14 (1) ◽  
pp. 19-29 ◽  
Author(s):  
Marian Irwin
Keyword(s):  
Methylene Blue ◽  
Partition Coefficients ◽  
Ph Value ◽  
Spectrophotometric Analysis ◽  
Glass Electrode ◽  
Methylene Blue Solution ◽  
Free Base ◽  
Azure B ◽  
Blue Solution

Glass electrode measurements of the pH value of the sap of cells of Nitella show that azure B in the form of free base penetrates the vacuoles and raises the pH value of the sap to about the same degree as the free base of the dye added to the sap in vitro, but the dye salt dissolved in the sap does not alter the pH value of the sap. It is concluded that the dye penetrates the vacuoles chiefly in the form of free base and not as salt. The dye from methylene blue solution containing azure B free base as impurity penetrates and accumulates in the vacuole. This dye must be azure B in the form of free base, since it raises the pH value of the sap to about the same extent as the free base of azure B dissolved in the sap in vitro. The dye absorbed by the chloroform from methylene blue solution behaves like the dye penetrating the vacuole. These results confirm those of spectrophotometric analysis previously published. Crystal violet exists only in one form between pH 5 and pH 9.2, and does not alter the pH value of the sap at the concentrations used. It does not penetrate readily unless cells are injured. A theory of "multiple partition coefficients" is described which explains the mechanism of the behavior of living cells to these dyes. When the protoplasm is squeezed into the sap, the pH value of the mixture is higher than that of the pure sap. The behavior of such a mixture to the dye is very much like that of the sap except that with azure B and methylene blue the rise in the pH value of such a mixture is not so pronounced as with sap when the dye penetrates into the vacuoles. Spectrophotometric measurements show that the dye which penetrates from methylene blue solution has a primary absorption maximum at 653 to 655 mµ (i.e., is a mixture of azure B and methylene blue, with preponderance of azure B) whether we take the sap alone or the sap plus protoplasm. These results confirm those previously obtained with spectrophotometric measurements.

Rhenium-188 Labeled Hydroxyapatite and Rhenium-188 Sulfur Colloid

1997 ◽  
Vol 36 (02) ◽  
pp. 71-75 ◽  
Author(s):  
S. Glatz ◽  
S. N. Reske ◽  
K. G. Grillenberger
Keyword(s):  
Synovial Fluid ◽  
Ph Value ◽  
Surgical Removal ◽  
Radiation Synovectomy ◽  
Sulfur Colloid ◽  
Target Organs ◽  
Aseptic Conditions ◽  
In Vitro Stability ◽  
Potential Use

Summary Aim: One therapeutic approach to rheumatoid arthritis and other inflammatory arthropathies besides surgical removal of inflamed synovium is radiation synovectomy using beta-emitting radionuclides to destroy the affected synovial tissue. Up to now the major problem associated with the use of labeled particles or colloids has been considerable leakage of radionuclides from the injected joint coupled with high radiation doses to liver and other non target organs. In this study we compared 188Re labeled hydroxyapatite particles and 188Re rhenium sulfur colloid for their potential use in radiation synovectomy. Methods: To this end we varied the labeling conditions (concentrations, pH-value, heating procedure) and analyzed the labeling yield, radiochemical purity, and in vitro stability of the resulting radiopharmaceutical. Results: After optimizing labeling conditions we achieved a labeling yield of more than 80% for 188Re hydroxyapatite and more than 90% for the rhenium sulfur colloid. Both of the radiopharmaceuticals can be prepared under aseptic conditions using an autoclav for heating without loss of activity. In vitro stability studies using various challenge solutions (water, normal saline, diluted synovial fluid) showed that 188Re labeled hydroxyapatite particles lost about 80% of their activity within 5 d in synovial fluid. Rhenium sulfur colloid on the other hand proved to be very stable with a remaining activity of more than 93% after 5 d in diluted synovial fluid. Conclusion: These in vitro results suggest that 188Re labeled rhenium sulfur colloid expects to be more suitable for therapeutic use in radiation synovectomy than the labeled hydroxyapatite particles.

In vitro Lipolysis as a Tool for the Establishment of IVIVC for Lipid-Based Drug Delivery Systems

2019 ◽  
Vol 16 (8) ◽  
pp. 688-697
Author(s):  
Ravinder Verma ◽  
Deepak Kaushik
Keyword(s):  
Drug Delivery ◽  
Ph Value ◽  
Electron Paramagnetic Resonance Spectroscopy ◽  
Rapid Screening ◽  
Resonance Spectroscopy ◽  
Fed State ◽  
In Vitro Lipolysis ◽  
Ph Stat

: In vitro lipolysis has emerged as a powerful tool in the development of in vitro in vivo correlation for Lipid-based Drug Delivery System (LbDDS). In vitro lipolysis possesses the ability to mimic the assimilation of LbDDS in the human biological system. The digestion medium for in vitro lipolysis commonly contains an aqueous buffer media, bile salts, phospholipids and sodium chloride. The concentrations of these compounds are defined by the physiological conditions prevailing in the fasted or fed state. The pH of the medium is monitored by a pH-sensitive electrode connected to a computercontrolled pH-stat device capable of maintaining a predefined pH value via titration with sodium hydroxide. Copenhagen, Monash and Jerusalem are used as different models for in vitro lipolysis studies. The most common approach used in evaluating the kinetics of lipolysis of emulsion-based encapsulation systems is the pH-stat titration technique. This is widely used in both the nutritional and the pharmacological research fields as a rapid screening tool. Analytical tools for the assessment of in vitro lipolysis include HPLC, GC, HPTLC, SEM, Cryo TEM, Electron paramagnetic resonance spectroscopy, Raman spectroscopy and Nanoparticle Tracking Analysis (NTA) for the characterization of the lipids and colloidal phases after digestion of lipids. Various researches have been carried out for the establishment of IVIVC by using in vitro lipolysis models. The current publication also presents an updated review of various researches in the field of in vitro lipolysis.

Improving Topical Skin Delivery of Monocrotaline Via Liposome Gel-based Nanosystems

2019 ◽  
Vol 16 (10) ◽  
pp. 940-950 ◽  
Author(s):  
Jiandong Yu ◽  
Zhi Chen ◽  
Yan-zhi Yin ◽  
Chaoyuan Tang ◽  
Enying Hu ◽  
...  
Keyword(s):  
Gradient Method ◽  
Encapsulation Efficiency ◽  
Ph Value ◽  
Topical Administration ◽  
Ph Gradient ◽  
Stability Factor ◽  
Buffer Solution ◽  
Skin Delivery ◽  
Skin Retention

Background: In this study, a liposomal gel based on a pH-gradient method was used to increase the skin-layer retention of monocrotaline (MCT) for topical administration. Methods: Using the Box-Behnken design, different formulations were designed to form liposome suspensions with optimal encapsulation efficiency (EE%) and stability factor (KE). In order to keep MCT in liposomes and accumulate in skin slowly and selectively, MCT liposome suspensions were engineered into gels. Results: A pH-gradient method was used to prepare liposome suspensions. The optimal formulation of liposome suspensions (encapsulation efficiency: 83.10 ± 0.21%) was as follows: MCT 12 mg, soybean phosphatidyl choline (sbPC) 200 mg, cholesterol (CH) 41 mg, vitamin E (VE) 5 mg, and citric acid buffer solution (CBS) 4.0 10 mL (pH 7.0). The final formulation of liposomal gels consisted of 32 mL liposome suspensions, 4.76 mL deionized water, 0.40 g Carbopol-940, 1.6 g glycerol, 0.04 g methylparaben, and a suitable amount of triethanolamine for pH value adjustment. The results of in vitro drug release showed that MCT in liposomal gels could be released in 12 h constantly in physiological saline as a Ritger-Peppas model. Compared with plain MCT in gel form, liposomal MCT in gel had higher skin retention in vitro. Conclusion: In this study, liposomal gels were formed for greater skin retention of MCT. It is potentially beneficial for reducing toxicities of MCT by topical administration with liposomal gel.

scholarly journals Photocuring Hyaluronic Acid/Silk Fibroin Hydrogel Containing Curcumin Loaded CHITOSAN Nanoparticles for the Treatment of MG-63 Cells and ME3T3-E1 Cells

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2302
Author(s):  
Qingwen Yu ◽  
Zhiyuan Meng ◽  
Yichao Liu ◽  
Zehao Li ◽  
Xing Sun ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Bone Regeneration ◽  
Water Uptake ◽  
Silk Fibroin ◽  
Bone Repair ◽  
Ph Value ◽  
Chitosan Nanoparticles ◽  
Vitro Assay ◽  
Long Term Treatment

After an osteosarcoma excision, recurrence and bone defects are significant challenges for clinicians. In this study, the curcumin (Cur) loaded chitosan (CS) nanoparticles (CCNP) encapsulated silk fibroin (SF)/hyaluronic acid esterified by methacrylate (HAMA) (CCNPs-SF/HAMA) hydrogel for the osteosarcoma therapy and bone regeneration was developed by photocuring and ethanol treatment. The micro or nanofibers networks were observed in the CCNPs-SF/HAMA hydrogel. The FTIR results demonstrated that alcohol vapor treatment caused an increase in β-sheets of SF, resulting in the high compression stress and Young’s modulus of CCNPs-SF/HAMA hydrogel. According to the water uptake analysis, SF caused a slight decrease in water uptake of CCNPs-SF/HAMA hydrogel while CCNPs could enhance the water uptake of it. The swelling kinetic results showed that both the CCNPs and the SF increased the swelling ratio of CCNPs-SF/HAMA hydrogel. The accumulative release profile of CCNPs-SF/HAMA hydrogel showed that the release of Cur from CCNPs-SF/HAMA hydrogel was accelerated when pH value was decreased from 7.4 to 5.5. Besides, compared with CCNPs, the CCNPs-SF/HAMA hydrogel had a more sustainable drug release, which was beneficial for the long-term treatment of osteosarcoma. In vitro assay results indicated that CCNPs-SF/HAMA hydrogel with equivalent Cur concentration of 150 μg/mL possessed both the effect of anti-cancer and promoting the proliferation of osteoblasts. These results suggest that CCNPs-SF/HAMA hydrogel with superior physical properties and the bifunctional osteosarcoma therapy and bone repair may be an excellent candidate for local cancer therapy and bone regeneration.

scholarly journals A Green Enzymatic Extraction Optimization and Oxidative Stability of Krill Oil from Euphausia Superba

Marine Drugs ◽  
2020 ◽  
Vol 18 (2) ◽  
pp. 82 ◽  
Author(s):  
Li Zhou ◽  
Fu Yang ◽  
Minghao Zhang ◽  
Jikai Liu
Keyword(s):  
Oxidative Stability ◽  
Ph Value ◽  
Thiobarbituric Acid ◽  
Euphausia Superba ◽  
Enzyme Concentration ◽  
Extraction Yield ◽  
Krill Oil ◽  
Tbars Values ◽  
Turbidity Increase

Krill oil enriched with polyunsaturated fatty acids is in the form of phospholipid. However, its application as a dietary supplement is limited, because of its rapid deterioration. Thus, this study aims to investigate the oxidative stability of krill oil extracted from Euphausia superba. Under optimal conditions (enzyme concentration 0.16%, enzymolysis time 2.9 h, and enzymolysis temperature of 45 °C) designed by response surface methodology, the extraction yield of krill oil is 86.02%. Five assays, including peroxide value (POV), thiobarbituric acid-reactive substances (TBARS), pH value, and turbidity were used to determine the oxidative stability of krill oil nanoliposomes during storage. Carboxymethyl chitosan (CMCS) nanoliposomes showed a significant reduction in POV and TBARS values, a prevention of pH value decrease and turbidity increase. This study indicated that CMCS nanoliposome can effectively improve the oxidative stability of krill oil during storage. Furthermore, the release profile in vitro illustrated that the controlled release of krill oil carried out by CMCS nanoliposomes is feasible.

scholarly journals The pH measurement with glass electrode in an electromagnetic field

2016 ◽  
Vol 81 (12) ◽  
pp. 1407-1414 ◽  
Author(s):  
Dragan Veselinovic ◽  
Zoran Velikic
Keyword(s):  
Electromagnetic Field ◽  
Buffer Capacity ◽  
Extreme Values ◽  
Ph Value ◽  
Radiation Power ◽  
Glass Electrode ◽  
Frequency Interval ◽  
Buffer Solutions ◽  
Ph Values ◽  
Glass Electrodes

Measurements of pH values of buffer solutions (pH 4.0, 7.0 and 10.0) and distilled water have been performed with a glass electrode in electromagnetic field at the frequency interval of 10 MHz to 200 MHz and the output power of dispersed and reflected electromagnetic radiation of 0.01 W to 3 W. In all the cases, there occurred a reduction of pH values, i.e. a "recorded pH value" was obtained. The reduction appears within the applied frequency interval reaching extreme values at specific frequencies. The reduction of the pH values increases with the radiation power and depend of the solution buffer capacity. The effect of electromagnetic field on pH value change is exerted dominantly through the influence on glass electrodes.

scholarly journals Micropropagation of Achillea millefolium L. on half-strength ms medium and direct rooting and acclimatization of microshoots in hydroponic culture

2015 ◽  
pp. 99-112
Author(s):  
Marija Markovic ◽  
Dragana Skocajic ◽  
Mihailo Grbic ◽  
Matilda Djukic ◽  
Dragica Obratov-Petkovic ◽  
...  
Keyword(s):  
Medicinal Plant ◽  
Nutrient Solution ◽  
Ph Value ◽  
Ex Vitro Rooting ◽  
In Vitro Rooting ◽  
Efficient Production ◽  
Ms Medium ◽  
Ex Vitro ◽  
Half Strength

The aim of this study was to determine the possibility of micropropagation of the medicinal plant A. millefolium on half-strength MS medium and ex vitro rooting and acclimatization of the obtained microshoots in hydroculture in order to establish an efficient production method. Two explant types were used: basal and terminal cuttings, and better results were achieved when terminal cuttings were used. The development of shoots in the multiplication phase was successful with a regeneration percentage of 100%. Ex vitro rooting in a modified Hoagland nutrient solution was successful (83%), but the percentage of in vitro rooting on half-strength MS medium without hormones was higher (95%). However, bearing in mind that mass production of A. millefolium is more efficient when the phase of in vitro rooting is excluded, this method could be recommended for commercial propagation of this medicinal plant. It is necessary to conduct additional research in order to optimize the composition, EC and pH value of the hydroponic nutrient solution.

Sign in / Sign up

Export Citation Format

Share Document