scholarly journals Major transmembrane movement associated with colicin Ia channel gating.

1996 ◽  
Vol 107 (3) ◽  
pp. 313-328 ◽  
Author(s):  
X Q Qiu ◽  
K S Jakes ◽  
P K Kienker ◽  
A Finkelstein ◽  
S L Slatin
Keyword(s):  
Water Soluble ◽  
Site Directed Mutagenesis ◽  
Lipid Bilayer Membranes ◽  
Transmembrane Segment ◽  
Transmembrane Segments ◽  
Protein Toxin ◽  
Channel Opening ◽  
Voltage Dependent ◽  
Opening And Closing ◽  
Colicin Ia

Colicin Ia, a bacterial protein toxin of 626 amino acid residues, forms voltage-dependent channels in planar lipid bilayer membranes. We have exploited the high affinity binding of streptavidin to biotin to map the topology of the channel-forming domain (roughly 175 residues of the COOH-terminal end) with respect to the membrane. That is, we have determined, for the channel's open and closed states, which parts of this domain are exposed to the aqueous solutions on either side of the membrane and which are inserted into the bilayer. This was done by biotinylating cysteine residues introduced by site-directed mutagenesis, and monitoring by electrophysiological methods the effect of streptavidin addition on channel behavior. We have identified a region of at least 68 residues that flips back and forth across the membrane in association with channel opening and closing. This identification was based on our observations that for mutants biotinylated in this region, streptavidin added to the cis (colicin-containing) compartment interfered with channel opening, and trans streptavidin interfered with channel closing. (If biotin was linked to the colicin by a disulfide bond, the effects of streptavidin on channel closing could be reversed by detaching the streptavidin-biotin complex from the colicin, using a water-soluble reducing agent. This showed that the cysteine sulfur, not just the biotin, is exposed to the trans solution). The upstream and downstream segments flanking the translocated region move into and out of the bilayer during channel opening and closing, forming two transmembrane segments. Surprisingly, if any of several residues near the upstream end of the translocated region is held on the cis side by streptavidin, the colicin still forms voltage-dependent channels, indicating that a part of the protein that normally is fully translocated across the membrane can become the upstream transmembrane segment. Evidently, the identity of the upstream transmembrane segment is not crucial to channel formation, and several open channel structures can exist.

scholarly journals Mutations Affecting Export and Activity of Cytolysin A from Escherichia coli

2010 ◽  
Vol 192 (15) ◽  
pp. 4001-4011 ◽  
Author(s):  
Albrecht Ludwig ◽  
Guido Völkerink ◽  
Christine von Rhein ◽  
Susanne Bauer ◽  
Elke Maier ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Lipid Bilayer ◽  
Hemolytic Activity ◽  
Water Soluble ◽  
Site Directed Mutagenesis ◽  
Tail Domain ◽  
Lipid Bilayer Membranes ◽  
Hydrophobic Region ◽  
Protein Toxin ◽  
Head Domain

ABSTRACT Cytolysin A (known as ClyA, HlyE, and SheA) is a cytolytic pore-forming protein toxin found in several Escherichia coli and Salmonella enterica strains. The structure of its water-soluble monomeric form and that of dodecameric ClyA pores is known, but the mechanisms of ClyA export from bacterial cells and of pore assembly are only partially understood. Here we used site-directed mutagenesis to study the importance of different regions of the E. coli ClyA protein for export and activity. The data indicate that ClyA translocation to the periplasm requires several protein segments located closely adjacent to each other in the “tail” domain of the ClyA monomer, namely, the N- and C-terminal regions and the hydrophobic sequence ranging from residues 89 to 101. Deletion of most of the “head” domain of the monomer (residues 181 to 203), on the other hand, did not strongly affect ClyA secretion, suggesting that the tail domain plays a particular role in export. Furthermore, we found that the N-terminal amphipathic helix αA1 of ClyA is crucial for the formation and the properties of the transmembrane channel, and hence for hemolytic activity. Several mutations affecting the C-terminal helix αG, the “β-tongue” region in the head domain, or the hydrophobic region in the tail domain of the ClyA monomer strongly impaired the hemolytic activity and reduced the activity toward planar lipid bilayer membranes but did not totally prevent formation of wild-type-like channels in these artificial membranes. The latter regions thus apparently promote membrane interaction without being directly required for pore formation in a lipid bilayer.

scholarly journals Conductive Properties and Gating of Channels Formed by Syringopeptin 25A, a Bioactive Lipodepsipeptide from Pseudomonas syringae pv. syringae, in Planar Lipid Membranes

1999 ◽  
Vol 12 (5) ◽  
pp. 401-409 ◽  
Author(s):  
Mauro Dalla Serra ◽  
Ivonne Bernhart ◽  
Paola Nordera ◽  
Domenico Di Giorgio ◽  
Alessandro Ballio ◽  
...  
Keyword(s):  
Pseudomonas Syringae ◽  
Lipid Membranes ◽  
Pore Radius ◽  
Maximal Conductance ◽  
Channel Opening ◽  
Current Voltage ◽  
Voltage Dependent ◽  
Planar Lipid Membranes ◽  
Opening And Closing ◽  
Conductive Properties

Syringopeptin 25A, a pseudomonad lipodepsipeptide, can form ion channels in planar lipid membranes. Pore conductance is around 40 pS in 0.1 M NaCl. Channel opening is strongly voltage dependent and requires a negative potential on the same side of the membrane where the toxin was added. These pores open and close with a lifetime of several seconds. At negative voltages, an additional pore state of around 10 pS and a lifetime of around 30 ms is also present. The voltage dependence of the rates of opening and closing of the stable pores is exponential. This allows estimation of the equivalent charge that is moved across the membrane during the process of opening at about 2.6 elementary charges. When NaCl is present, the pore is roughly 3 times more permeant for anions than for cations. The current voltage characteristic of the pore is nonlinear, i.e., pore conductance is larger at negative than at positive voltages. The maximal conductance of the pore depends on the concentration of the salt present, in a way that varies almost linearly with the conductivity of the solution. From this, an estimate of a minimal pore radius of 0.4 nm was derived.

scholarly journals Identification of Channel-lining Amino Acid Residues in the Hydrophobic Segment of Colicin Ia

2008 ◽  
Vol 132 (6) ◽  
pp. 693-707 ◽  
Author(s):  
Paul K. Kienker ◽  
Karen S. Jakes ◽  
Alan Finkelstein
Keyword(s):  
Crystal Structure ◽  
Amino Acid ◽  
Lipid Bilayer ◽  
Open Channel ◽  
Structural Model ◽  
Water Soluble ◽  
Amino Acid Residues ◽  
Lipid Bilayer Membranes ◽  
Planar Bilayers ◽  
Colicin Ia

Colicin Ia is a bactericidal protein of 626 amino acid residues that kills its target cell by forming a channel in the inner membrane; it can also form voltage-dependent channels in planar lipid bilayer membranes. The channel-forming activity resides in the carboxy-terminal domain of ∼177 residues. In the crystal structure of the water-soluble conformation, this domain consists of a bundle of 10 α-helices, with eight mostly amphipathic helices surrounding a hydrophobic helical hairpin (helices H8-H9). We wish to know how this structure changes to form a channel in a lipid bilayer. Although there is evidence that the open channel has four transmembrane segments (H8, H9, and parts of H1 and H6-H7), their arrangement relative to the pore is largely unknown. Given the lack of a detailed structural model, it is imperative to better characterize the channel-lining protein segments. Here, we focus on a segment of 44 residues (573–616), which in the crystal structure comprises the H8-H9 hairpin and flanking regions. We mutated each of these residues to a unique cysteine, added the mutant colicins to the cis side of planar bilayers to form channels, and determined whether sulfhydryl-specific methanethiosulfonate reagents could alter the conduction of ions through the open channel. We found a pattern of reactivity consistent with parts of H8 and H9 lining the channel as α-helices, albeit rather short ones for spanning a lipid bilayer (12 residues). The effects of the reactions on channel conductance and selectivity tend to be greater for residues near the amino terminus of H8 and the carboxy terminus of H9, with particularly large effects for G577C, T581C, and G609C, suggesting that these residues may occupy a relatively constricted region near the cis end of the channel.

scholarly journals Helical Structure and Packing Orientation of the S2 Segment in the Shaker K+ Channel

1999 ◽  
Vol 113 (3) ◽  
pp. 415-423 ◽  
Author(s):  
Stephen A. Monks ◽  
Daniel J. Needleman ◽  
Christopher Miller
Keyword(s):  
Membrane Lipids ◽  
Structural Characteristics ◽  
Helical Structure ◽  
High Impact ◽  
K Channel ◽  
Transmembrane Segments ◽  
Helical Wheel ◽  
Channel Opening ◽  
Voltage Dependent ◽  
Α Helix

Six transmembrane segments, S1–S6, cluster around the central pore-forming region in voltage-gated K+ channels. To investigate the structural characteristics of the S2 segment in the Shaker K+ channel, we replaced each residue in S2 singly with tryptophan (or with alanine for the native tryptophan). All but one of the 23 Trp mutants expressed voltage-dependent K+ currents in Xenopus oocytes. The effects of the mutations were classified as being of low or high impact on channel gating properties. The periodicity evident in the effects of these mutations supports an α-helical structure for the S2 segment. The high- and low-impact residues cluster onto opposite faces of a helical wheel projection of the S2 segment. The low-impact face is also tolerant of single mutations to asparagine. All results are consistent with the idea that the low-impact face projects toward membrane lipids and that changes in S2 packing occur upon channel opening. We conclude that the S2 segment is a transmembrane α helix and that the high-impact face packs against other transmembrane segments in the functional channel.

scholarly journals Residues in Transmembrane Segments of the P2X4 Receptor Contribute to Channel Function and Ethanol Sensitivity

2020 ◽  
Author(s):  
Maya Popova ◽  
Larry Rodriguez ◽  
James R. Trudell ◽  
Sylvia Nguyen ◽  
Michael Bloomfield ◽  
...  
Keyword(s):  
Site Directed Mutagenesis ◽  
Molecular Models ◽  
Ethanol Sensitivity ◽  
Wild Type ◽  
Transmembrane Segments ◽  
Channel Function ◽  
Channel Opening ◽  
Promising Target ◽  
Electrode Voltage ◽  
Open States

Mouse models of alcohol use disorder (AUD) revealed a subtype of purinergic receptors (P2X4Rs) as a promising target for AUD drug development. We have previously demonstrated that residues at the transmembrane (TM)-ectodomain interface and within TM1 segment contribute to the formation of an ethanol action pocket in P2X4Rs. In the present study, we tested the hypothesis that there are more residues in TM segments, which are important for ethanol sensitivity of P2X4Rs. Using site-directed mutagenesis and two-electrode voltage-clamp electrophysiology in Xenopus oocytes, we found that arginine at position 33 (R33) in the TM1 segment plays a role in ethanol sensitivity of P2X4Rs. Molecular models in both closed and open states provided evidence for interactions between R33 and aspartic acid at position 354 (D354) of the neighboring TM2 segment. Further work with mixtures of wild-type (WT) and reciprocal single (R33D:WT, D354R:WT) and double (R33D-D354R:WT) mutants confirmed the importance of this interaction for ethanol sensitivity, ivermectin action and channel function. Additionally, our findings suggest that valine at TM1 position 49 plays a role in P2X4R function by providing flexibility during channel opening. Collectively, these findings identified new activity sites, and suggest the importance of TM1-TM2 interaction for channel function and ethanol sensitivity of P2X4Rs.

scholarly journals Residues in Transmembrane Segments of the P2X4 Receptor Contribute to Channel Function and Ethanol Sensitivity

2020 ◽  
Vol 21 (7) ◽  
pp. 2471 ◽  
Author(s):  
Maya Popova ◽  
Larry Rodriguez ◽  
James R. Trudell ◽  
Sylvia Nguyen ◽  
Michael Bloomfield ◽  
...  
Keyword(s):  
Site Directed Mutagenesis ◽  
Molecular Models ◽  
Ethanol Sensitivity ◽  
Wild Type ◽  
Transmembrane Segments ◽  
Channel Opening ◽  
Promising Target ◽  
Electrode Voltage ◽  
P2x4 Receptors ◽  
Open States

Mouse models of alcohol use disorder (AUD) revealed purinergic P2X4 receptors (P2X4Rs) as a promising target for AUD drug development. We have previously demonstrated that residues at the transmembrane (TM)–ectodomain interface and within the TM1 segment contribute to the formation of an ethanol action pocket in P2X4Rs. In the present study, we tested the hypothesis that there are more residues in TM1 and TM2 segments that are important for the ethanol sensitivity of P2X4Rs. Using site-directed mutagenesis and two electrode voltage-clamp electrophysiology in Xenopus oocytes, we found that arginine at position 33 (R33) in the TM1 segment plays a role in the ethanol sensitivity of P2X4Rs. Molecular models in both closed and open states provided evidence for interactions between R33 and aspartic acid at position 354 (D354) of the neighboring TM2 segment. The loss of ethanol sensitivity in mixtures of wild-type (WT) and reciprocal single mutants, R33D:WT and D354R:WT, versus the WT-like response in R33D-D354R:WT double mutant provided further support for this interaction. Additional findings indicated that valine at TM1 position 49 plays a role in P2X4R function by providing flexibility/stability during channel opening. Collectively, these findings identified new activity sites and suggest the importance of TM1-TM2 interaction for the function and ethanol sensitivity of P2X4Rs.

scholarly journals Site-Directed Mutagenesis of the Heterotrimeric Killer Toxin Zymocin Identifies Residues Required for Early Steps in Toxin Action

2014 ◽  
Vol 80 (20) ◽  
pp. 6549-6559 ◽  
Author(s):  
Sabrina Wemhoff ◽  
Roland Klassen ◽  
Friedhelm Meinhardt
Keyword(s):  
Kluyveromyces Lactis ◽  
Killer Toxin ◽  
Cysteine Residue ◽  
Site Directed Mutagenesis ◽  
Target Cells ◽  
Directed Mutagenesis ◽  
Content Type ◽  
Protein Toxin ◽  
Assisted Delivery

ABSTRACTZymocin is aKluyveromyces lactisprotein toxin composed of αβγ subunits encoded by the cytoplasmic virus-like element k1 and functions by αβ-assisted delivery of the anticodon nuclease (ACNase) γ into target cells. The toxin binds to cells' chitin and exhibits chitinase activityin vitrothat might be important during γ import.Saccharomyces cerevisiaestrains carrying k1-derived hybrid elements deficient in either αβ (k1ORF2) or γ (k1ORF4) were generated. Loss of either gene abrogates toxicity, and unexpectedly, Orf2 secretion depends on Orf4 cosecretion. Functional zymocin assembly can be restored by nuclear expression of k1ORF2 or k1ORF4, providing an opportunity to conduct site-directed mutagenesis of holozymocin. Complementation required active site residues of α's chitinase domain and the sole cysteine residue of β (Cys250). Since βγ are reportedly disulfide linked, the requirement for the conserved γ C231 was probed. Toxicity of intracellularly expressed γ C231A indicated no major defect in ACNase activity, while complementation of k1ΔORF4 by γ C231A was lost, consistent with a role of β C250 and γ C231 in zymocin assembly. To test the capability of αβ to carry alternative cargos, the heterologous ACNase fromPichia acaciae(P. acaciaeOrf2 [PaOrf2]) was expressed, along with its immunity gene, in k1ΔORF4. While efficient secretion of PaOrf2 was detected, suppression of the k1ΔORF4-derived k1Orf2 secretion defect was not observed. Thus, the dependency of k1Orf2 on k1Orf4 cosecretion needs to be overcome prior to studying αβ's capability to deliver other cargo proteins into target cells.

scholarly journals Two distinct voltage-sensing domains control voltage sensitivity and kinetics of current activation in CaV1.1 calcium channels

2016 ◽  
Vol 147 (6) ◽  
pp. 437-449 ◽  
Author(s):  
Petronel Tuluc ◽  
Bruno Benedetti ◽  
Pierre Coste de Bagneaux ◽  
Manfred Grabner ◽  
Bernhard E. Flucher
Keyword(s):  
Calcium Channels ◽  
Molecular Mechanisms ◽  
Voltage Dependence ◽  
Specific Interaction ◽  
Site Directed Mutagenesis ◽  
Control Voltage ◽  
Voltage Sensitivity ◽  
Voltage Sensing ◽  
Activation Kinetics ◽  
Transmembrane Segments

Alternative splicing of the skeletal muscle CaV1.1 voltage-gated calcium channel gives rise to two channel variants with very different gating properties. The currents of both channels activate slowly; however, insertion of exon 29 in the adult splice variant CaV1.1a causes an ∼30-mV right shift in the voltage dependence of activation. Existing evidence suggests that the S3–S4 linker in repeat IV (containing exon 29) regulates voltage sensitivity in this voltage-sensing domain (VSD) by modulating interactions between the adjacent transmembrane segments IVS3 and IVS4. However, activation kinetics are thought to be determined by corresponding structures in repeat I. Here, we use patch-clamp analysis of dysgenic (CaV1.1 null) myotubes reconstituted with CaV1.1 mutants and chimeras to identify the specific roles of these regions in regulating channel gating properties. Using site-directed mutagenesis, we demonstrate that the structure and/or hydrophobicity of the IVS3–S4 linker is critical for regulating voltage sensitivity in the IV VSD, but by itself cannot modulate voltage sensitivity in the I VSD. Swapping sequence domains between the I and the IV VSDs reveals that IVS4 plus the IVS3–S4 linker is sufficient to confer CaV1.1a-like voltage dependence to the I VSD and that the IS3–S4 linker plus IS4 is sufficient to transfer CaV1.1e-like voltage dependence to the IV VSD. Any mismatch of transmembrane helices S3 and S4 from the I and IV VSDs causes a right shift of voltage sensitivity, indicating that regulation of voltage sensitivity by the IVS3–S4 linker requires specific interaction of IVS4 with its corresponding IVS3 segment. In contrast, slow current kinetics are perturbed by any heterologous sequences inserted into the I VSD and cannot be transferred by moving VSD I sequences to VSD IV. Thus, CaV1.1 calcium channels are organized in a modular manner, and control of voltage sensitivity and activation kinetics is accomplished by specific molecular mechanisms within the IV and I VSDs, respectively.

Polymer inaccessible volume changes during opening and closing of a voltage-dependent ionic channel

Nature ◽  
1986 ◽  
Vol 323 (6083) ◽  
pp. 36-39 ◽  
Author(s):  
Joshua Zimmerberg ◽  
V. Adrian Parsegian
Keyword(s):  
Ionic Channel ◽  
Volume Changes ◽  
Voltage Dependent ◽  
Opening And Closing
Sign in / Sign up

Export Citation Format

Share Document