scholarly journals Improved preservation and staining of HeLa cell actin filaments, clathrin-coated membranes, and other cytoplasmic structures by tannic acid-glutaraldehyde-saponin fixation.

1983 ◽  
Vol 96 (1) ◽  
pp. 51-62 ◽  
Author(s):  
P Maupin ◽  
T D Pollard
Keyword(s):  
Tannic Acid ◽  
Hela Cells ◽  
Actin Filaments ◽  
Amorphous Material ◽  
Stress Fibers ◽  
Cell Cortex ◽  
Intact Cells ◽  
Cytoplasmic Matrix ◽  
Cytoplasmic Structures ◽  
Coated Membrane

Fixation of HeLa cells with a mixture of 100 mM glutaraldehyde, 2 mg/ml tannic acid and 0.5 mg/ml saponin allows the tannic acid to penetrate intact cells without disruption of membranes or extraction of the cytoplasmic matrix. After subsequent treatment with OsO4 cytoplasmic structures are stained so densely that fine details are visible even in very thin (dark gray) sections. Actin filaments are protected from disruption by OsO4 so that straight, densely stained filaments are seen in the cell cortex, filopodia, ruffling membranes, and stress fibers. Stress fibers also have 15-18-nm densities similar in appearance to myosin filaments. Tannic acid staining reveals that the coats of coated vesicles, pits, and plaques have a 12-nm layer of amorphous material between the membrane and the clathrin basketwork. HeLa cells have very large clathrin-coated membrane plaques on the basal surface. These coated membrane plaques appear to be a previously unrecognized site of cell-substrate adhesion.

scholarly journals Banding and polarity of actin filaments in interphase and cleaving cells.

1980 ◽  
Vol 86 (2) ◽  
pp. 568-575 ◽  
Author(s):  
J M Sanger ◽  
J W Sanger
Keyword(s):  
Electron Microscopy ◽  
Tannic Acid ◽  
Actin Filaments ◽  
Cell Junctions ◽  
Stress Fibers ◽  
Cleavage Furrow ◽  
Heavy Meromyosin ◽  
Glutaraldehyde Fixation ◽  
Microfilament Bundles ◽  
Uniform Polarity

Heavy meromyosin (HMM) decoration of actin filaments was used to detect the polarity of microfilaments in interphase and cleaving rat kangaroo (PtK2) cells. Ethanol at -20 degrees C was used to make the cells permeable to HMM followed by tannic acid-glutaraldehyde fixation for electron microscopy. Uniform polarity of actin filaments was observed at cell junctions and central attachment plaques with the HMM arrowheads always pointing away from the junction or plaque. Stress fibers were banded in appearance with their component microfilaments exhibiting both parallel and antiparallel orientation with respect to one another. Identical banding of microfilament bundles was also seen in cleavage furrows with the same variation in filament polarity as found in stress fibers. Similarly banded fibers were not seen outside the cleavage furrow in mitotic cells. By the time that a mid-body was present, the actin filaments in the cleavage furrow were no longer in banded fibers. The alternating dark and light bands of both the stress fibers and cleavage furrow fibers are approximately equal in length, each measuring approximately 0.16 micrometer. Actin filaments were present in both bands, and individual decorated filaments could sometimes be traced through four band lengths. Undecorated filaments, 10 nm in diameter, could often be seen within the light bands. A model is proposed to explain the arrangement of filaments in stress fibers and cleavage furrows based on the striations observed with tannic acid and the polarity of the actin filaments.

scholarly journals Properties of the 120,000- and 95,000-dalton actin-binding proteins from Dictyostelium discoideum and their possible functions in assembling the cytoplasmic matrix.

1984 ◽  
Vol 99 (1) ◽  
pp. 119s-126s ◽  
Author(s):  
J Condeelis ◽  
M Vahey ◽  
J M Carboni ◽  
J DeMey ◽  
S Ogihara
Keyword(s):  
Molecular Mass ◽  
Actin Filaments ◽  
Binding Proteins ◽  
Actin Binding ◽  
Cell Cortex ◽  
Actin Binding Proteins ◽  
Cytoplasmic Matrix ◽  
Native Molecular Mass ◽  
Antigenic Properties ◽  
First Time

The cell cortex of Dictyostelium amebae contains an actin-rich cytoplasmic matrix. Changes in geometry of this matrix are believed to regulate protrusive activity and motility of the cell cortex. Two actin-binding proteins (120,000 and 95,000 daltons [120K and 95K]) are present in the cell cortex, and their properties, many of which are described here for the first time, suggest that they regulate growth and organization of cortical microfilaments. The 120K protein is a flexible dimer 35 nm in length with a native molecular mass of 241,000. It nucleates the polymerization of actin and crosslinks the filaments to form branched networks like those seen in situ in the cell cortex. The production of a branched network of short crosslinked filaments results in a lattice that would theoretically generate the maximum rigidity with minimum amount of polymer. This sort of lattice would be very useful as a space-filling cytoskeleton capable of resisting deformation. The 120K protein inhibits the actin-stimulated Mg ATPase of myosin. Competition for actin binding between 120K and myosin, the impenetrability of the 120K-actin network to myosin, and the rigidity of actin filaments that are crosslinked by 120K could all contribute to the decrease in the actin-stimulated Mg ATPase of myosin. The properties of 120K are consistent with a role for this protein in regulating the site of actin filament growth and gelation in the cell but not the assembly of actin-containing structures that would participate in force generation by a sliding-filament mechanism involving myosin. The 95K protein is a rigid dimer 40 nm in length with a native molecular mass of between 190,000 and 210,000. Its physical and antigenic properties lead us to conclude that the 95K protein is Dictyostelium alpha-actinin. Unlike 120K, it crosslinks actin filaments into lateral arrays and increases the actin-stimulated Mg ATPase of myosin. Both activities are regulated by Ca2+. The properties of 95K are consistent with a role in organizing actin filaments in the cell into lateral arrays that are capable of efficient interaction with myosin to produce force for cell motility.

Electron Microscopy of Cytoplasmic Contractile Proteins

1978 ◽  
Vol 36 (3) ◽  
pp. 606-614 ◽  
Author(s):  
T.D. Pollard ◽  
P. Maupin
Keyword(s):  
Electron Microscopy ◽  
Actin Filaments ◽  
Three Dimensional ◽  
Uranyl Acetate ◽  
Contractile Proteins ◽  
Dimensional Structure ◽  
X Ray Diffraction ◽  
Cytoplasmic Matrix ◽  
Computer Image Processing ◽  
Nonmuscle Cells

In this paper we review some of the contributions that electron microscopy has made to the analysis of actin and myosin from nonmuscle cells. We place particular emphasis upon the limitations of the ultrastructural techniques used to study these cytoplasmic contractile proteins, because it is not widely recognized how difficult it is to preserve these elements of the cytoplasmic matrix for electron microscopy. The structure of actin filaments is well preserved for electron microscope observation by negative staining with uranyl acetate (Figure 1). In fact, to a resolution of about 3nm the three-dimensional structure of actin filaments determined by computer image processing of electron micrographs of negatively stained specimens (Moore et al., 1970) is indistinguishable from the structure revealed by X-ray diffraction of living muscle.

Confocal microscopy of the cytoskeleton in living plant cells following microinjection of fluorescent probes

1993 ◽  
Vol 51 ◽  
pp. 130-131
Author(s):  
Ann Cleary
Keyword(s):  
Cell Division ◽  
Fluorescent Probes ◽  
Actin Filaments ◽  
Intracellular Transport ◽  
Cell Structure ◽  
Plant Cells ◽  
Cell Plate ◽  
Cell Cortex ◽  
Living Plant ◽  
Rhodamine Phalloidin

Microinjection of fluorescent probes into living plant cells reveals new aspects of cell structure and function. Microtubules and actin filaments are dynamic components of the cytoskeleton and are involved in cell growth, division and intracellular transport. To date, cytoskeletal probes used in microinjection studies have included rhodamine-phalloidin for labelling actin filaments and fluorescently labelled animal tubulin for incorporation into microtubules. From a recent study of Tradescantia stamen hair cells it appears that actin may have a role in defining the plane of cell division. Unlike microtubules, actin is present in the cell cortex and delimits the division site throughout mitosis. Herein, I shall describe actin, its arrangement and putative role in cell plate placement, in another material, living cells of Tradescantia leaf epidermis.The epidermis is peeled from the abaxial surface of young leaves usually without disruption to cytoplasmic streaming or cell division. The peel is stuck to the base of a well slide using 0.1% polyethylenimine and bathed in a solution of 1% mannitol +/− 1 mM probenecid.

scholarly journals Mechanism of the formation of contractile ring in dividing cultured animal cells. II. Cortical movement of microinjected actin filaments.

1990 ◽  
Vol 111 (5) ◽  
pp. 1905-1911 ◽  
Author(s):  
L G Cao ◽  
Y L Wang
Keyword(s):  
Actin Filaments ◽  
Average Rate ◽  
Rat Kidney ◽  
Equatorial Region ◽  
Cell Cortex ◽  
Polar Regions ◽  
Cortical Actin ◽  
Animal Cells ◽  
Contractile Ring ◽  
Directional Movement

The contractile ring in dividing animal cells is formed primarily through the reorganization of existing actin filaments (Cao, L.-G., and Y.-L. Wang. 1990. J. Cell Biol. 110:1089-1096), but it is not clear whether the process involves a random recruitment of diffusible actin filaments from the cytoplasm, or a directional movement of cortically associated filaments toward the equator. We have studied this question by observing the distribution of actin filaments that have been labeled with fluorescent phalloidin and microinjected into dividing normal rat kidney (NRK) cells. The labeled filaments are present primarily in the cytoplasm during prometaphase and early metaphase, but become associated extensively with the cell cortex 10-15 min before the onset of anaphase. This process is manifested both as an increase in cortical fluorescence intensity and as movements of discrete aggregates of actin filaments toward the cortex. The concentration of actin fluorescence in the equatorial region, accompanied by a decrease of fluorescence in polar regions, is detected 2-3 min after the onset of anaphase. By directly tracing the distribution of aggregates of labeled actin filaments, we are able to detect, during anaphase and telophase, movements of cortical actin filaments toward the equator at an average rate of 1.0 micron/min. Our results, combined with previous observations, suggest that the organization of actin filaments during cytokinesis probably involves an association of cytoplasmic filaments with the cortex, a movement of cortical filaments toward the cleavage furrow, and a dissociation of filaments from the equatorial cortex.

scholarly journals Specification of Actin Filament Function and Molecular Composition by Tropomyosin Isoforms

2003 ◽  
Vol 14 (3) ◽  
pp. 1002-1016 ◽  
Author(s):  
Nicole S. Bryce ◽  
Galina Schevzov ◽  
Vicki Ferguson ◽  
Justin M. Percival ◽  
Jim J.-C. Lin ◽  
...  
Keyword(s):  
Cell Size ◽  
Functional Properties ◽  
Actin Filament ◽  
Actin Filaments ◽  
Myosin Ii ◽  
Molecular Composition ◽  
Cellular Migration ◽  
Stress Fibers ◽  
Human Homologue ◽  
Tropomyosin Isoforms

The specific functions of greater than 40 vertebrate nonmuscle tropomyosins (Tms) are poorly understood. In this article we have tested the ability of two Tm isoforms, TmBr3 and the human homologue of Tm5 (hTM5NM1), to regulate actin filament function. We found that these Tms can differentially alter actin filament organization, cell size, and shape. hTm5NM1was able to recruit myosin II into stress fibers, which resulted in decreased lamellipodia and cellular migration. In contrast, TmBr3 transfection induced lamellipodial formation, increased cellular migration, and reduced stress fibers. Based on coimmunoprecipitation and colocalization studies, TmBr3 appeared to be associated with actin-depolymerizing factor/cofilin (ADF)-bound actin filaments. Additionally, the Tms can specifically regulate the incorporation of other Tms into actin filaments, suggesting that selective dimerization may also be involved in the control of actin filament organization. We conclude that Tm isoforms can be used to specify the functional properties and molecular composition of actin filaments and that spatial segregation of isoforms may lead to localized specialization of actin filament function.

scholarly journals Extraction of accurate cytoskeletal actin velocity distributions from noisy measurements

2020 ◽  
Author(s):  
Cayla M. Miller ◽  
Elgin Korkmazhan ◽  
Alexander R. Dunn
Keyword(s):  
Single Molecule ◽  
Actin Filaments ◽  
Dynamical Behavior ◽  
Jump Process ◽  
Pairwise Distance ◽  
Actin Dynamics ◽  
Cell Cortex ◽  
Superresolution Microscopy ◽  
Distance Distributions ◽  
Primary Fibroblasts

Dynamic remodeling of the actin cytoskeleton allows cells to migrate, change shape, and exert mechanical forces on their surroundings. How the complex dynamical behavior of the cytoskeleton arises from the interactions of its molecular components remains incompletely understood. Tracking the movement of individual actin filaments in living cells can in principle provide a powerful means of addressing this question. However, single-molecule fluorescence imaging measurements that could provide this information are limited by low signal-to-noise ratios, with the result that the localization errors for individual fluorophore fiducials attached to filamentous (F)-actin are comparable to the distances traveled by actin filaments between measurements. In this study we tracked the movement F-actin labeled with single-molecule densities of the fluorogenic label SiR-actin in primary fibroblasts and endothelial cells. We then used a Bayesian statistical approach to estimate true, underlying actin filament velocity distributions from the tracks of individual actin-associated fluorophores along with quantified localization uncertainties. This analysis approach is broadly applicable to inferring statistical pairwise distance distributions arising from noisy point localization measurements such as occur in superresolution microscopy. We found that F-actin velocity distributions were better described by a statistical jump process, in which filaments exist in mechanical equilibria punctuated by abrupt, jump-like movements, than by models incorporating combinations of diffusive motion and drift. A model with exponentially distributed time- and length-scales for filament jumps recapitulated F-actin velocity distributions measured for the cell cortex, integrin-based adhesions, and actin stress fibers, indicating that a common physical model can potentially describe F-actin dynamics in a variety of cellular contexts.

scholarly journals AUTOPHAGIC VACUOLES PRODUCED IN VITRO

1968 ◽  
Vol 38 (2) ◽  
pp. 377-391 ◽  
Author(s):  
Martha E. Fedorko ◽  
James G. Hirsch ◽  
Zanvil A. Cohn
Keyword(s):  
Culture Medium ◽  
Amorphous Material ◽  
Vacuolar Membrane ◽  
Perinuclear Region ◽  
Linear Element ◽  
Autophagic Vacuoles ◽  
Dense Bodies ◽  
Mouse Macrophages ◽  
Cytoplasmic Structures

Mouse macrophages exposed to 30 µg/ml of chloroquine in vitro develop autophagic vacuoles containing various cytoplasmic components and acid phosphatase. The early toxic vacuoles appear in the perinuclear region within 15 min; on electron microscopy, they show irregular shape, amorphous moderately dense content, apparent double membranes, and in some instances curved thin tubular extensions with a central, dark linear element. Cytoplasmic structures are probably transported into the vacuoles by invagination of the vacuolar membrane. After exposure to chloroquine for 1–4 hr, macrophages display large vacuoles containing degraded cytoplasmic structures, membranous whorls, and amorphous material. When chloroquine is removed by changing the culture medium after 4 hr, the cells survive and 24 hr later they exhibit no abnormality except for large cytoplasmic dense bodies packed with membrane lamellae. During recovery chloroquine disappears from the cells. 24 hr after exposure to chloroquine the macrophages have accumulated less hydrolases than control cells.

scholarly journals Characterization of Sporidiobolus ruineniae A45.2 Cultivated in Tannin Substrate for Use as a Potential Multifunctional Probiotic Yeast in Aquaculture

2020 ◽  
Vol 6 (4) ◽  
pp. 378
Author(s):  
Apinun Kanpiengjai ◽  
Chartchai Khanongnuch ◽  
Saisamorn Lumyong ◽  
Aksarakorn Kummasook ◽  
Suwapat Kittibunchakul
Keyword(s):  
Staphylococcus Aureus ◽  
Antioxidant Activity ◽  
Gallic Acid ◽  
Tannic Acid ◽  
Feed Additive ◽  
Intact Cells ◽  
Produce Cell ◽  
Viable Cells ◽  
Probiotic Yeast ◽  
Acid Substrate

At present, few yeast species have been evaluated for their beneficial capabilities as probiotics. Sporidiobolus ruineniae A45.2, a carotenoid-producing yeast, was able to co-produce cell-associated tannase (CAT), gallic acid and viable cells with antioxidant activity when grown in a tannic acid substrate. The aim of this research study was to identify the potential uses of S. ruineniae A45.2 obtained from a co-production system as a potential feed additive for aquaculture. S. ruineniae A45.2 and its CAT displayed high tolerance in pH 2.0, pepsin, bile salts and pancreatin. Furthermore, its viable cells were characterized by moderate hydrophobicity, high auto-aggregation and moderate co-aggregation with Staphylococcus aureus, Salmonella ser. Thyphimurium and Streptococcus agalactiae. These attributes promoted S. ruineniae A45.2 as a multifunctional probiotic yeast. In addition, the intact cells possessed antioxidant activities in a 100–150 μg gallic acid equivalent (GAE)/mL culture. Remarkably, the fermentation broth demonstrated higher antioxidant activity of 9.2 ± 1.8, 9.0 ± 0.9, and 9.8 ± 0.7 mg GAE/mL culture after FRAP, DPPH and ABTS assays, respectively. Furthermore, higher antimicrobial activity was observed against Bacillus cereus, Staphylococcus aureus and Strep. agalactiae. Therefore, cultivation of S. ruineniae A45.2 with a tannic acid substrate displayed significant potential as an effective multifunctional feed additive.

Sign in / Sign up

Export Citation Format

Share Document