scholarly journals Implications of treadmilling for the stability and polarity of actin and tubulin polymers in vivo.

1980 ◽  
Vol 86 (1) ◽  
pp. 330-334 ◽  
Author(s):  
M W Kirschner
Keyword(s):  
Actin Filaments ◽  
Spatial Organization ◽  
Complete Suppression ◽  
Gtp Hydrolysis ◽  
Spontaneous Polymerization ◽  
Filament Assembly ◽  
Selective Stabilization ◽  
The Stability

In this report, we examine how the cell can selectively stabilize anchored filaments and suppress spontaneous filament assembly. Because microtubules and actin filaments have an organized distribution in cells, the cell must have a mechanism for suppressing spontaneous and random polymerization. Though the mechanism for suppressing spontaneous polymerization is unknown, an unusual property of these filaments has been demonstrated recently, i.e., under steady-stae conditions, in vitro actin filaments and microtubules can exhibit a flux of subunits through the polymers called "treadmilling." In vivo, however, most, if not all, of these polymers are attached at one end to specific structures and treadmilling should not occur. The function of treadmilling in vivo is, therefore, unclear at present. However, as shown here, the same physicochemical property of coupling assembly to ATP or GTP hydrolysis that leads to treadmilling in vitro can act to selectively stabilize anchored polymers in vivo. I show here that the theory of treadmilling implies that the concentration of subunits necessary for assembly of the nonanchored polymer will in general be higher than the concentration necessary for the assembly of polymers anchored with a specific polarity. This disparity in the monomer concentrations required for assembly can lead to a selective stabilization of anchored polymers and complete suppression of spontaneous polymerization at apparent equilibrium in vivo. It is possible, therefore, that the phenomenon of treadmilling is an in vitro manifestation of a mechanism designed to use ATP or GTP hydrolysis to control the spatial organization of filaments in the cell.

scholarly journals Septin collar formation in budding yeast requires GTP binding and direct phosphorylation by the PAK, Cla4

2004 ◽  
Vol 164 (5) ◽  
pp. 701-715 ◽  
Author(s):  
Matthias Versele ◽  
Jeremy Thorner
Keyword(s):  
Wild Type ◽  
Gtp Hydrolysis ◽  
Filament Assembly ◽  
Gtp Binding ◽  
Type Mutant ◽  
Binding Residues ◽  
Septin Filament ◽  
Assembly Defect

Assembly at the mother–bud neck of a filamentous collar containing five septins (Cdc3, Cdc10, Cdc11, Cdc12, and Shs1) is necessary for proper morphogenesis and cytokinesis. We show that Cdc10 and Cdc12 possess GTPase activity and appropriate mutations in conserved nucleotide-binding residues abrogate GTP binding and/or hydrolysis in vitro. In vivo, mutants unable to bind GTP prevent septin collar formation, whereas mutants that block GTP hydrolysis do not. GTP binding-defective Cdc10 and Cdc12 form soluble heteromeric complexes with other septins both in yeast and in bacteria; yet, unlike wild-type, mutant complexes do not bind GTP and do not assemble into filaments in vitro. Absence of a p21-activated protein kinase (Cla4) perturbs septin collar formation. This defect is greatly exacerbated when combined with GTP binding-defective septins; conversely, the septin collar assembly defect of such mutants is suppressed efficiently by CLA4 overexpression. Cla4 interacts directly with and phosphorylates certain septins in vitro and in vivo. Thus, septin collar formation may correspond to septin filament assembly, and requires both GTP binding and Cla4-mediated phosphorylation of septins.

scholarly journals Overexpression of human fibroblast caldesmon fragment containing actin-, Ca++/calmodulin-, and tropomyosin-binding domains stabilizes endogenous tropomyosin and microfilaments.

1994 ◽  
Vol 125 (2) ◽  
pp. 359-368 ◽  
Author(s):  
K S Warren ◽  
J L Lin ◽  
D D Wamboldt ◽  
J J Lin
Keyword(s):  
Cho Cells ◽  
Actin Filaments ◽  
Actin Binding ◽  
Expression Vectors ◽  
Binding Domains ◽  
Microfilament Bundles ◽  
The Stability ◽  
Triton X

Fibroblast caldesmon is a protein postulated to participate in the modulation of the actin cytoskeleton and the regulation of actin-based motility. The cDNAs encoding the NH2-terminal (aa.1-243, CaD40) and COOH-terminal (aa.244-538, CaD39) fragments of human caldesmon were subcloned into expression vectors and we previously reported that bacterially produced CaD39 protein retains its actin-binding properties as well as its ability to enhance low M(r) tropomyosin (TM) binding to actin and to inhibit TM-actin-activated HMM ATPase activity in vitro (Novy, R. E., J. R. Sellers, L.-F. Liu, and J. J.-C. Lin. 1993. Cell Motil. Cytoskeleton. 26:248-261). Bacterially produced CaD40 does not bind actin. To study the in vivo effects of CaD39 expression on the stability of actin filaments in CHO cells, we isolated and characterized stable CHO transfectants which express varying amounts of CaD39. We found that expression of CaD39 in CHO cells stabilized microfilament bundles as well as endogenous TM. CaD39-expressing clones displayed an increased resistance to cytochalasin B and Triton X-100 treatments and yielded increased amounts of TM-containing actin filaments in microfilament isolation procedures. In addition, analysis of these clones with immunoblotting and indirect immunofluorescence microscopy with anti-TM antibody revealed that stabilized endogenous TM and enhanced TM-containing microfilament bundles parallel increased amounts of CaD39 expression. The increased TM observed corresponded to a decrease in TM turnover rate and did not appear to be due to increased synthesis of endogenous TM. Additionally, the phenomenon of stabilized TM did not occur in stable CHO clones expressing CaD40. Therefore, it is likely that CaD39 can enhance TM's binding to F-actin in vivo, thus reducing TM's rate of turnover and stabilizing actin microfilament bundles.

scholarly journals Lamellipodin promotes actin assembly by clustering Ena/VASP proteins and tethering them to actin filaments

eLife ◽  
2015 ◽  
Vol 4 ◽  
Author(s):  
Scott D Hansen ◽  
R Dyche Mullins
Keyword(s):  
Axon Guidance ◽  
Actin Filaments ◽  
Network Formation ◽  
Focal Adhesions ◽  
Leading Edge ◽  
Polymerase Activity ◽  
Actin Assembly ◽  
Filament Assembly

Enabled/Vasodilator (Ena/VASP) proteins promote actin filament assembly at multiple locations, including: leading edge membranes, focal adhesions, and the surface of intracellular pathogens. One important Ena/VASP regulator is the mig-10/Lamellipodin/RIAM family of adaptors that promote lamellipod formation in fibroblasts and drive neurite outgrowth and axon guidance in neurons. To better understand how MRL proteins promote actin network formation we studied the interactions between Lamellipodin (Lpd), actin, and VASP, both in vivo and in vitro. We find that Lpd binds directly to actin filaments and that this interaction regulates its subcellular localization and enhances its effect on VASP polymerase activity. We propose that Lpd delivers Ena/VASP proteins to growing barbed ends and increases their polymerase activity by tethering them to filaments. This interaction represents one more pathway by which growing actin filaments produce positive feedback to control localization and activity of proteins that regulate their assembly.

scholarly journals How Listeria exploits host cell actin to form its own cytoskeleton. II. Nucleation, actin filament polarity, filament assembly, and evidence for a pointed end capper.

1992 ◽  
Vol 118 (1) ◽  
pp. 83-93 ◽  
Author(s):  
L G Tilney ◽  
D J DeRosier ◽  
A Weber ◽  
M S Tilney
Keyword(s):  
Host Cell ◽  
Actin Filaments ◽  
Critical Concentration ◽  
Filament Assembly ◽  
Tightly Coupled ◽  
Pointed End ◽  
Phagosomal Membrane ◽  
Simple Picture

After Listeria, a bacterium, is phagocytosed by a macrophage, it dissolves the phagosomal membrane and enters the cytoplasm. The Listeria than nucleates actin filaments from its surface. These newly assembled actin filaments show unidirectional polarity with their barbed ends associated with the surface of the Listeria. Using actin concentrations below the pointed end critical concentration we find that filament elongation must be occurring by monomers adding to the barbed ends, the ends associated with the Listerial surface. If Listeria with tails are incubated in G actin under polymerizing conditions, the Listeria is translocated away from its preformed tail by the elongation of filaments attached to the Listeria. This experiment and others tell us that in vivo filament assembly must be tightly coupled to filament capping and cross-bridging so that if one process outstrips another, chaos ensues. We also show that the actin filaments in the tail are capped on their pointed ends which inhibits further elongation and/or disassembly in vitro. From these results we suggest a simple picture of how Listeria competes effectively for host cell actin. When Listeria secretes a nucleator, the host's actin subunits polymerize into a filament. Host cell machinery terminate the assembly leaving a short filament. Listeria overcomes the host control by nucleating new filaments and thus many short filaments assemble. The newest filaments push existing ones into a growing tail. Thus the competition is between nucleation of filaments caused by Listeria and the filament terminators produced by the host.

scholarly journals Actin filaments in yeast are unstable in the absence of capping protein or fimbrin.

1995 ◽  
Vol 131 (6) ◽  
pp. 1483-1493 ◽  
Author(s):  
T S Karpova ◽  
K Tatchell ◽  
J A Cooper
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Actin Filament ◽  
Actin Filaments ◽  
Binding Proteins ◽  
Actin Binding ◽  
Actin Binding Proteins ◽  
Capping Protein ◽  
Filament Assembly

Many actin-binding proteins affect filament assembly in vitro and localize with actin in vivo, but how their molecular actions contribute to filament assembly in vivo is not understood well. We report here that capping protein (CP) and fimbrin are both important for actin filament assembly in vivo in Saccharomyces cerevisiae, based on finding decreased actin filament assembly in CP and fimbrin mutants. We have also identified mutations in actin that enhance the CP phenotype and find that those mutants also have decreased actin filament assembly in vivo. In vitro, actin purified from some of these mutants is defective in polymerization or binding fimbrin. These findings support the conclusion that CP acts to stabilize actin filaments in vivo. This conclusion is particularly remarkable because it is the opposite of the conclusion drawn from recent studies in Dictyostelium (Hug, C., P.Y. Jay, I. Reddy, J.G. McNally, P.C. Bridgman, E.L. Elson, and J.A. Cooper. 1995. Cell. 81:591-600). In addition, we find that the unpolymerized pool of actin in yeast is very small relative to that found in higher cells, which suggests that actin filament assembly is less dynamic in yeast than higher cells.

Formation and Structure of Casein Micelles in Lactating Mammary Tissue

1970 ◽  
Vol 28 ◽  
pp. 150-151
Author(s):  
Robert J. Carroll ◽  
Marvin P. Thompson ◽  
Harold M. Farrell
Keyword(s):  
Size Distribution ◽  
G Protein ◽  
Milk Proteins ◽  
Mammary Tissue ◽  
Colloidal System ◽  
Casein Micelles ◽  
The Stability

Milk is an unusually stable colloidal system; the stability of this system is due primarily to the formation of micelles by the major milk proteins, the caseins. Numerous models for the structure of casein micelles have been proposed; these models have been formulated on the basis of in vitro studies. Synthetic casein micelles (i.e., those formed by mixing the purified αsl- and k-caseins with Ca2+ in appropriate ratios) are dissimilar to those from freshly-drawn milks in (i) size distribution, (ii) ratio of Ca/P, and (iii) solvation (g. water/g. protein). Evidently, in vivo organization of the caseins into the micellar form occurs in-a manner which is not identical to the in vitro mode of formation.

Kinetics of Various 99mTc-Sn-Pyrophosphate Compounds in the Rat

1977 ◽  
Vol 16 (04) ◽  
pp. 157-162 ◽  
Author(s):  
C. Schümichen ◽  
B. Mackenbrock ◽  
G. Hoffmann
Keyword(s):  
Normal Saline ◽  
Half Life ◽  
Compound A ◽  
Short Half Life ◽  
Low Concentrations ◽  
The Stability ◽  
Kinetics Of ◽  
In Vitro Stability

SummaryThe bone-seeking 99mTc-Sn-pyrophosphate compound (compound A) was diluted both in vitro and in vivo and proved to be unstable both in vitro and in vivo. However, stability was much better in vivo than in vitro and thus the in vitro stability of compound A after dilution in various mediums could be followed up by a consecutive evaluation of the in vivo distribution in the rat. After dilution in neutral normal saline compound A is metastable and after a short half-life it is transformed into the other 99mTc-Sn-pyrophosphate compound A is metastable and after a short half-life in bone but in the kidneys. After dilution in normal saline of low pH and in buffering solutions the stability of compound A is increased. In human plasma compound A is relatively stable but not in plasma water. When compound B is formed in a buffering solution, uptake in the kidneys and excretion in urine is lowered and blood concentration increased.It is assumed that the association of protons to compound A will increase its stability at low concentrations while that to compound B will lead to a strong protein bond in plasma. It is concluded that compound A will not be stable in vivo because of a lack of stability in the extravascular space, and that the protein bond in plasma will be a measure of its in vivo stability.

Applicability of Instability Index for In vitro Protein Stability Prediction

2019 ◽  
Vol 26 (5) ◽  
pp. 339-347 ◽  
Author(s):  
Dilani G. Gamage ◽  
Ajith Gunaratne ◽  
Gopal R. Periyannan ◽  
Timothy G. Russell
Keyword(s):  
Protein Stability ◽  
Caulobacter Crescentus ◽  
Effect Of Temperature ◽  
Instability Index ◽  
Dipeptide Composition ◽  
Experimental Conditions ◽  
The Stability ◽  
Vitro Protein

Background: The dipeptide composition-based Instability Index (II) is one of the protein primary structure-dependent methods available for in vivo protein stability predictions. As per this method, proteins with II value below 40 are stable proteins. Intracellular protein stability principles guided the original development of the II method. However, the use of the II method for in vitro protein stability predictions raises questions about the validity of applying the II method under experimental conditions that are different from the in vivo setting. Objective: The aim of this study is to experimentally test the validity of the use of II as an in vitro protein stability predictor. Methods: A representative protein CCM (CCM - Caulobacter crescentus metalloprotein) that rapidly degrades under in vitro conditions was used to probe the dipeptide sequence-dependent degradation properties of CCM by generating CCM mutants to represent stable and unstable II values. A comparative degradation analysis was carried out under in vitro conditions using wildtype CCM, CCM mutants and two other candidate proteins: metallo-β-lactamase L1 and α -S1- casein representing stable, borderline stable/unstable, and unstable proteins as per the II predictions. The effect of temperature and a protein stabilizing agent on CCM degradation was also tested. Results: Data support the dipeptide composition-dependent protein stability/instability in wt-CCM and mutants as predicted by the II method under in vitro conditions. However, the II failed to accurately represent the stability of other tested proteins. Data indicate the influence of protein environmental factors on the autoproteolysis of proteins. Conclusion: Broader application of the II method for the prediction of protein stability under in vitro conditions is questionable as the stability of the protein may be dependent not only on the intrinsic nature of the protein but also on the conditions of the protein milieu.

Sign in / Sign up

Export Citation Format

Share Document