scholarly journals Rapid induction of morphological changes in human carcinoma cells A-431 by epidermal growth factors.

1979 ◽  
Vol 83 (1) ◽  
pp. 260-265 ◽  
Author(s):  
M Chinkers ◽  
J A McKanna ◽  
S Cohen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Growth Factors ◽  
Morphological Changes ◽  
Carcinoma Cells ◽  
Human Carcinoma ◽  
Rapid Induction ◽  
Epidermal Growth ◽  
Scanning Electron

The morphological effects of epidermal growth factor (EGF) on human carcinoma cells A-431 have been examined by scanning electron microscopy. These flat polygonal cells normally exhibit only small membrane folds, but show extensive ruffling and extension of filopodia within 5 min of exposure to EGF at 37 degrees C. This ruffling activity is transient, subsiding within another 5--15 min, but several other changes in surface morphology follow. Within the first hour of exposure to the hormone, the cell surface becomes exceedingly smooth and the nuclei seem to protrude above the plane of the otherwise thin monolayer, giving the cells a "fried egg" appearance. Cells at the edges of colonies gradually retract from the substrate, leading to reorganization, by 12 h, of the monolayer into multilayered colonies. EGF thus induces both rapid and long-term alterations in the morphology of these epidermoid cells.

Field-Emission Scanning Electron Microscopy and Energy-Dispersive X-Ray Analysis to Understand the Role of Tannin-Based Dyes in the Degradation of Historical Wool Textiles

2014 ◽  
Vol 20 (5) ◽  
pp. 1534-1543 ◽  
Author(s):  
Annalaura Restivo ◽  
Ilaria Degano ◽  
Erika Ribechini ◽  
Josefina Pérez-Arantegui ◽  
Maria Perla Colombini
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Elemental Composition ◽  
Field Emission ◽  
Cross Sections ◽  
Morphological Changes ◽  
Energy Dispersive ◽  
X Ray ◽  
Edx Analysis ◽  
Scanning Electron

Abstract:An innovative approach, combining field-emission scanning electron microscopy (FESEM) with energy dispersive X-ray spectroscopy (EDX) analysis, is presented to investigate the degradation mechanisms affecting tannin-dyed wool. In fact, tannin-dyed textiles are more sensitive to degradation then those dyed with other dyestuffs, even in the same conservation conditions.FESEM-EDX was first used to study a set of 48 wool specimens (artificially aged) dyed with several raw materials and mordants, and prepared according to historical dyeing recipes. EDX analysis was performed on the surface of wool threads and on their cross-sections. In addition, in order to validate the model formulated by the analysis of reference materials, several samples collected from historical and archaeological textiles were subjected to FESEM-EDX analysis.FESEM-EDX investigations enabled us to reveal the correlation between elemental composition and morphological changes. In addition, aging processes were clarified by studying changes in the elemental composition of wool from the protective cuticle to the fiber core in cross-sections. Morphological and elemental analysis of wool specimens and of archaeological and historical textiles showed that the presence of tannins increases wool damage, primarily by causing a sulfur decrease and fiber oxidation.

scholarly journals Preparation and Characterization of PEBAX-5513/AgBF4/BMIMBF4 Membranes for Olefin/Paraffin Separation

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1550 ◽  
Author(s):  
So Young Kim ◽  
Younghyun Cho ◽  
Sang Wook Kang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Poor Performance ◽  
Amide Group ◽  
Stabilizing Effect ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Scanning Electron

In this study, we investigated a poly(ether-block-amide)-5513 (PEBAX-5513)/AgBF4/1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4) composite membrane, which is expected to have a high stabilizing effect on the Ag+ ions functioning as olefin carriers in the amide group. Poly(ethylene oxide) (PEO) only consists of ether regions, whereas the PEBAX-5513 copolymer contains both ether and amide regions. However, given the brittle nature of the amide, the penetration of BMIMBF4 remains challenging. The nanoparticles did not stabilize after their formation in the long-term test, thereby resulting in a poor performance compared to previous experiments using PEO as the polymer (selectivity 3; permeance 12.3 GPU). The properties of the functional groups in the polymers were assessed using Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis, which confirmed that the properties endowed during the production of the film using the ionic liquid can impact the performance.

scholarly journals New crosslinkers for electrospun chitosan fibre mats. I. Chemical analysis

2012 ◽  
Vol 9 (75) ◽  
pp. 2551-2562 ◽  
Author(s):  
Marjorie S. Austero ◽  
Amalie E. Donius ◽  
Ulrike G. K. Wegst ◽  
Caroline L. Schauer
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Mechanical Stability ◽  
Dissolution Tests ◽  
Natural Polysaccharide ◽  
Biomedical Field ◽  
The Stability ◽  
Scanning Electron

Chitosan (CS), the deacetylated form of chitin, the second most abundant, natural polysaccharide, is attractive for applications in the biomedical field because of its biocompatibility and resorption rates, which are higher than chitin. Crosslinking improves chemical and mechanical stability of CS. Here, we report the successful utilization of a new set of crosslinkers for electrospun CS. Genipin, hexamethylene-1,6-diaminocarboxysulphonate (HDACS) and epichlorohydrin (ECH) have not been previously explored for crosslinking of electrospun CS. In this first part of a two-part publication, we report the morphology, determined by field emission scanning electron microscopy (FESEM), and chemical interactions, determined by Fourier transform infrared microscopy, respectively. FESEM revealed that CS could successfully be electrospun from trifluoroacetic acid with genipin, HDACS and ECH added to the solution. Diameters were 267 ± 199 nm, 644 ± 359 nm and 896 ± 435 nm for CS–genipin, CS–HDACS and CS–ECH, respectively. Short- (15 min) and long-term (72 h) dissolution tests (T 600 ) were performed in acidic, neutral and basic pHs (3, 7 and 12). Post-spinning activation by heat and base to enhance crosslinking of CS–HDACS and CS–ECH decreased the fibre diameters and improved the stability. In the second part of this publication, we report the mechanical properties of the fibres.

scholarly journals Bioengineering of Improved Biomaterials Coatings for Extracorporeal Circulation Requires Extended Observation of Blood-Biomaterial Interaction under Flow

2007 ◽  
Vol 2007 ◽  
pp. 1-10 ◽  
Author(s):  
Kris N. J. Stevens ◽  
Yvette B. J. Aldenhoff ◽  
Frederik H. van der Veen ◽  
Jos G. Maessen ◽  
Leo H. Koole
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Thrombus Formation ◽  
Blood Parameters ◽  
Systematic Evaluation ◽  
Loop Model ◽  
Biomaterial Surfaces ◽  
Chandler Loop ◽  
Scanning Electron

Extended use of cardiopulmonary bypass (CPB) systems is often hampered by thrombus formation and infection. Part of these problems relates to imperfect hemocompatibility of the CPB circuitry. The engineering of biomaterial surfaces with genuine long-term hemocompatibility is essentially virgin territory in biomaterials science. For example, most experiments with the well-known Chandler loop model, for evaluation of blood-biomaterial interactions under flow, have been described for a maximum duration of 2 hours only. This study reports a systematic evaluation of two commercial CPB tubings, each with a hemocompatible coating, and one uncoated control. The experiments comprised (i) testing over 5 hours under flow, with human whole blood from 4 different donors; (ii) measurement of essential blood parameters of hemocompatibility; (iii) analysis of the luminal surfaces by scanning electron microscopy and thrombin generation time measurements. The dataset indicated differences in hemocompatibility of the tubings. Furthermore, it appeared that discrimination between biomaterial coatings can be made only after several hours of blood-biomaterial contact. Platelet counting, myeloperoxidase quantification, and scanning electron microscopy proved to be the most useful methods. These findings are believed to be relevant with respect to the bioengineering of extracorporeal devices that should function in contact with blood for extended time.

A comparison of scolex morphology between the plerocercoid and the adult of Calliobothrium verticillatum (Tetraphyllidea: Onchobothriidae)

1991 ◽  
Vol 69 (6) ◽  
pp. 1484-1488 ◽  
Author(s):  
J. N. Caira ◽  
T. R. Ruhnke
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Hermit Crab ◽  
Morphological Changes ◽  
Complex Surface ◽  
Apical Region ◽  
Apical Sucker ◽  
Mustelus Canis ◽  
Scanning Electron ◽  
Surface Changes

The morphological changes associated with the ontogenetic transformation of the scolex from larva to adult were investigated in the tapeworm Calliobothrium verticillatum (Rudolphi, 1819) van Beneden, 1850 by comparing the morphology of plerocercoids collected from the hermit crab Pagurus pollicaris Say, 1817 with that of adult worms collected from the shark Mustelus canis (Mitchell, 1815), using scanning electron microscopy. The apex of the scolex in young plerocercoids bore a conspicuous sucker. Each bothridium was flat and divided into four regions: an anterior oval region with two marginal bumps, and three posterior loculi clearly marked by two costae. The microthrix pattern was not determined for very young plerocercoids. The most conspicuous feature of older plerocercoids was the sucker on the apex of the scolex. The bothridia were concave, and each bore an apical region subdivided into three shallow suckers and three conspicuous loculi. Densely packed blade-like microtriches intermingled with filiform microtriches were visible on all surfaces of the scolex except the surface directly adjacent to the opening of the apical sucker of the scolex, which was entirely devoid of microtriches, and the proximal surfaces of the bothridia, which had only blade-like microtriches. The apical sucker was absent from the scolex adult specimens. The only remnant of this structure was a small knob on the apex of the scolex. The bothridia were concave and bore, from anterior to posterior, three conspicuous apical suckers arranged in a horizontal row adjacent to one another, two pairs of single-pronged hooks, and three conspicuous loculi. Densely packed blade-like microtriches were present on all proximal surfaces of the scolex. Microtriches were not present on the distal surfaces of the apical suckers of the bothridia, on the hooks, or on the distal surfaces of the loculi of the bothridia. The latter regions were covered with very small, round structures. The differences in the microthrix components of the various surfaces of the scolex between the plerocercoid and the adult suggest that complex surface changes occur during this phase of ontogeny. Comparison of the development of this species with that of other onchobothriids suggests that, in general, the number of loculi to be expected in the plerocercoid of an onchobothriid is one plus the number of posthook loculi in the adult.

Mechanisms Controlling Dormancy in the Arid Zone Grass Aristida contorta. II. Anatomy of the Hull

1974 ◽  
Vol 22 (4) ◽  
pp. 647 ◽  
Author(s):  
JJ Mott ◽  
PW Tynan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Gas Permeability ◽  
Arid Zone ◽  
Light And Electron Microscopy ◽  
Anatomical Change ◽  
Definitive Statement ◽  
Scanning Electron

The anatomy of the hull directly over the embryo was examined by light and electron microscopy in long-term dormant and non-dormant grains of A. contorta. A lipid-containing layer was noted, covering the surface of the inner epidermis of the hull, and examination by scanning electron microscopy showed that although the layer was intact in all dormant grain examined, it was fractured in non-dormant grain. A definitive statement on the function of these cracks is not possible, but they appear to be an anatomical change leading to increased gas permeability of the hull of non-dormant grains.

Sign in / Sign up

Export Citation Format

Share Document