scholarly journals Stu2 Promotes Mitotic Spindle Elongation in Anaphase

2001 ◽  
Vol 153 (2) ◽  
pp. 435-442 ◽  
Author(s):  
Fedor Severin ◽  
Bianca Habermann ◽  
Tim Huffaker ◽  
Tony Hyman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Mitotic Spindle ◽  
Related Protein ◽  
Mitotic Spindles ◽  
Yeast Saccharomyces Cerevisiae ◽  
Microtubule Stabilization ◽  
Destabilizing Factors ◽  
Spindle Elongation ◽  
Anaphase B ◽  
Segregation Of Chromosomes

During anaphase, mitotic spindles elongate up to five times their metaphase length. This process, known as anaphase B, is essential for correct segregation of chromosomes. Here, we examine the control of spindle length during anaphase in the budding yeast Saccharomyces cerevisiae. We show that microtubule stabilization during anaphase requires the microtubule-associated protein Stu2. We further show that the activity of Stu2 is opposed by the activity of the kinesin-related protein Kip3. Reexamination of the kinesin homology tree suggests that KIP3 is the S. cerevisiae orthologue of the microtubule-destabilizing subfamily of kinesins (Kin I). We conclude that a balance of activity between evolutionally conserved microtubule-stabilizing and microtubule-destabilizing factors is essential for correct spindle elongation during anaphase B.

scholarly journals Three-dimensional ultrastructural analysis of the Saccharomyces cerevisiae mitotic spindle.

1995 ◽  
Vol 129 (6) ◽  
pp. 1601-1615 ◽  
Author(s):  
M Winey ◽  
C L Mamay ◽  
E T O'Toole ◽  
D N Mastronarde ◽  
T H Giddings ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Mitotic Spindle ◽  
Mother Cell ◽  
Early Stage ◽  
Three Dimensional ◽  
The Other ◽  
Mitotic Spindles ◽  
Yeast Saccharomyces Cerevisiae ◽  
Computer Aided ◽  
Anaphase B

The three dimensional organization of microtubules in mitotic spindles of the yeast Saccharomyces cerevisiae has been determined by computer-aided reconstruction from electron micrographs of serially cross-sectioned spindles. Fifteen spindles ranging in length from 0.6-9.4 microns have been analyzed. Ordered microtubule packing is absent in spindles up to 0.8 micron, but the total number of microtubules is sufficient to allow one microtubule per kinetochore with a few additional microtubules that may form an interpolar spindle. An obvious bundle of about eight interpolar microtubules was found in spindles 1.3-1.6 microns long, and we suggest that the approximately 32 remaining microtubules act as kinetochore fibers. The relative lengths of the microtubules in these spindles suggest that they may be in an early stage of anaphase, even though these spindles are all situated in the mother cell, not in the isthmus between mother and bud. None of the reconstructed spindles exhibited the uniform populations of kinetochore microtubules characteristic of metaphase. Long spindles (2.7-9.4 microns), presumably in anaphase B, contained short remnants of a few presumed kinetochore microtubules clustered near the poles and a few long microtubules extending from each pole toward the spindle midplane, where they interdigitated with their counterparts from the other pole. Interpretation of these reconstructed spindles offers some insights into the mechanisms of mitosis in this yeast.

scholarly journals Spindle dynamics and cell cycle regulation of dynein in the budding yeast, Saccharomyces cerevisiae.

1995 ◽  
Vol 130 (3) ◽  
pp. 687-700 ◽  
Author(s):  
E Yeh ◽  
R V Skibbens ◽  
J W Cheng ◽  
E D Salmon ◽  
K Bloom
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Nuclear Translocation ◽  
Spindle Pole ◽  
Cell Cortex ◽  
Wild Type ◽  
Immunofluorescent Localization ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Dynamics ◽  
Spindle Elongation ◽  
Anaphase B

We have used time-lapse digital- and video-enhanced differential interference contrast (DE-DIC, VE-DIC) microscopy to study the role of dynein in spindle and nuclear dynamics in the yeast Saccharomyces cerevisiae. The real-time analysis reveals six stages in the spindle cycle. Anaphase B onset appears marked by a rapid phase of spindle elongation, simultaneous with nuclear migration into the daughter cell. The onset and kinetics of rapid spindle elongation are identical in wild type and dynein mutants. In the absence of dynein the nucleus does not migrate as close to the neck as in wild-type cells and initial spindle elongation is confined primarily to the mother cell. Rapid oscillations of the elongating spindle between the mother and bud are observed in wild-type cells, followed by a slower growth phase until the spindle reaches its maximal length. This stage is protracted in the dynein mutants and devoid of oscillatory motion. Thus dynein is required for rapid penetration of the nucleus into the bud and anaphase B spindle dynamics. Genetic analysis reveals that in the absence of a functional central spindle (ndcl), dynein is essential for chromosome movement into the bud. Immunofluorescent localization of dynein-beta-galactosidase fusion proteins reveals that dynein is associated with spindle pole bodies and the cell cortex: with spindle pole body localization dependent on intact microtubules. A kinetic analysis of nuclear movement also revealed that cytokinesis is delayed until nuclear translocation is completed, indicative of a surveillance pathway monitoring nuclear transit into the bud.

scholarly journals Astral microtubules are not required for anaphase B in Saccharomyces cerevisiae.

1992 ◽  
Vol 119 (2) ◽  
pp. 379-388 ◽  
Author(s):  
D S Sullivan ◽  
T C Huffaker
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Cell Cycle Progression ◽  
Additional Time ◽  
Gene Encoding ◽  
Yeast Saccharomyces Cerevisiae ◽  
Bud Neck ◽  
Spindle Elongation ◽  
Sensitive Allele ◽  
Anaphase B

tub2-401 is a cold-sensitive allele of TUB2, the sole gene encoding beta-tubulin in the yeast, Saccharomyces cerevisiae. At 18 degrees C, tub2-401 cells are able to assemble spindle microtubules but lack astral microtubules. Under these conditions, movement of the spindle to the bud neck is blocked. However, spindle elongation and chromosome separation are unimpeded and occur entirely within the mother cell. Subsequent cytokinesis produces one cell with two nuclei and one cell without a nucleus. The anucleate daughter can not bud. The binucleate daughter proceeds through another cell cycle to produce a cell with four nuclei and another anucleate cell. With additional time in the cold, the number of nuclei in the nucleated cells continues to increase and the percentage of anucleate cells in the population rises. The results indicate that astral microtubules are needed to position the spindle in the bud neck but are not required for spindle elongation at anaphase B. In addition, cell cycle progression does not depend on the location or orientation of the spindle.

scholarly journals Three-dimensional Ultrastructure of Saccharomyces cerevisiae Meiotic Spindles

2005 ◽  
Vol 16 (3) ◽  
pp. 1178-1188 ◽  
Author(s):  
Mark Winey ◽  
Garry P. Morgan ◽  
Paul D. Straight ◽  
Thomas H. Giddings ◽  
David N. Mastronarde
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Meiotic Chromosome ◽  
Three Dimensional ◽  
Structural Basis ◽  
Mitotic Spindles ◽  
Yeast Saccharomyces Cerevisiae ◽  
Homologous Chromosomes ◽  
Sister Chromatids ◽  
Single Nucleus ◽  
Meiotic Spindles

Meiotic chromosome segregation leads to the production of haploid germ cells. During meiosis I (MI), the paired homologous chromosomes are separated. Meiosis II (MII) segregation leads to the separation of paired sister chromatids. In the budding yeast Saccharomyces cerevisiae, both of these divisions take place in a single nucleus, giving rise to the four-spored ascus. We have modeled the microtubules in 20 MI and 15 MII spindles by using reconstruction from electron micrographs of serially sectioned meiotic cells. Meiotic spindles contain more microtubules than their mitotic counterparts, with the highest number in MI spindles. It is possible to differentiate between MI versus MII spindles based on microtubule numbers and organization. Similar to mitotic spindles, kinetochores in either MI or MII are attached by a single microtubule. The models indicate that the kinetochores of paired homologous chromosomes in MI or sister chromatids in MII are separated at metaphase, similar to mitotic cells. Examination of both MI and MII spindles reveals that anaphase A likely occurs in addition to anaphase B and that these movements are concurrent. This analysis offers a structural basis for considering meiotic segregation in yeast and for the analysis of mutants defective in this process.

scholarly journals Smy1p, a Kinesin-related Protein That Does Not Require Microtubules

1998 ◽  
Vol 140 (4) ◽  
pp. 873-883 ◽  
Author(s):  
S.H. Lillie ◽  
S.S. Brown
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Motor Activity ◽  
Secretory Pathway ◽  
Genetic Interaction ◽  
Related Protein ◽  
Wild Type ◽  
Yeast Saccharomyces Cerevisiae ◽  
Functional Link ◽  
Specific Step ◽  
Tubulin Mutations

Abstract. We have previously reported that a defect in Myo2p, a myosin in budding yeast (Saccharomyces cerevisiae), can be partially corrected by overexpression of Smy1p, which is by sequence a kinesin-related protein (Lillie, S.H., and S.S. Brown. 1992. Nature. 356:358– 361). Such a functional link between putative actin- and microtubule-based motors is surprising, so here we have tested the prediction that Smy1p indeed acts as a microtubule-based motor. Unexpectedly, we found that abolition of microtubules by nocodazole does not interfere with the ability of Smy1p to correct the mutant Myo2p defect, nor does it interfere with the ability of Smy1p to localize properly. In addition, other perturbations of microtubules, such as treatment with benomyl or introduction of tubulin mutations, do not exacerbate the Myo2p defect. Furthermore, a mutation in SMY1 strongly predicted to destroy motor activity does not destroy Smy1p function. We have also observed a genetic interaction between SMY1 and two of the late SEC mutations, sec2 and sec4. This indicates that Smy1p can play a role even when Myo2p is wild type, and that Smy1p acts at a specific step of the late secretory pathway. We conclude that Smy1p does not act as a microtubule-based motor to localize properly or to compensate for defective Myo2p, but that it must instead act in some novel way.

Motor proteins in Saccharomyces cerevisiae

1995 ◽  
Vol 73 (S1) ◽  
pp. 369-371 ◽  
Author(s):  
Susan S. Brown
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Binding Site ◽  
Key Words ◽  
Motor Proteins ◽  
Nucleotide Binding ◽  
Nucleotide Binding Site ◽  
Temperature Sensitive ◽  
Related Protein ◽  
Yeast Saccharomyces Cerevisiae

A number of myosins have been identified in yeast (Saccharomyces cerevisiae), an organism ideally suited to dissecting out their different functions. We have learned that a temperature-sensitive defect in one of these myosins (Myo2p) can be partially overcome by overexpression of a kinesin-like protein (Smy1p). This raises the possibility of the involvement of microtubules in the same function as Myo2p. However, we have been unable to demonstrate that this is the case, either using nocodazole to depolymerize microtubules or by altering the nucleotide-binding site of Smy1p. Key words: myosin, kinesin-related protein, cytoskeleton.

scholarly journals Chromosomal attachments set length and microtubule number in the Saccharomyces cerevisiae mitotic spindle

2014 ◽  
Vol 25 (25) ◽  
pp. 4034-4048 ◽  
Author(s):  
Natalie J. Nannas ◽  
Eileen T. O’Toole ◽  
Mark Winey ◽  
Andrew W. Murray
Keyword(s):  
Electron Microscopy ◽  
Saccharomyces Cerevisiae ◽  
Simple Model ◽  
Mitotic Spindle ◽  
Cell Types ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Poles ◽  
Length Regulation ◽  
Spindle Microtubules ◽  
Different Cell Types

The length of the mitotic spindle varies among different cell types. A simple model for spindle length regulation requires balancing two forces: pulling, due to micro­tubules that attach to the chromosomes at their kinetochores, and pushing, due to interactions between microtubules that emanate from opposite spindle poles. In the budding yeast Saccharomyces cerevisiae, we show that spindle length scales with kinetochore number, increasing when kinetochores are inactivated and shortening on addition of synthetic or natural kinetochores, showing that kinetochore–microtubule interactions generate an inward force to balance forces that elongate the spindle. Electron microscopy shows that manipulating kinetochore number alters the number of spindle microtubules: adding extra kinetochores increases the number of spindle microtubules, suggesting kinetochore-based regulation of microtubule number.

Nuclear behaviour and cell wall composition in relation to budding in mutants of the yeast Saccharomyces cerevisiae

1986 ◽  
Vol 64 (1) ◽  
pp. 193-200 ◽  
Author(s):  
Mario Lachapelle ◽  
E. Roger Boothroyd
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Spindle Pole ◽  
Minor Role ◽  
Temperature Sensitive ◽  
Yeast Saccharomyces Cerevisiae ◽  
Bud Emergence ◽  
Spindle Elongation ◽  
10 Nm Filaments ◽  
A Minor

A temperature-sensitive, cell division cycle mutant (cdc24–1) and karyogamy-deficient (kar1) mutant of Saccharomyces cerevisiae, both of which can produce binucleate or multinucleate cells, were used to study certain aspects of budding, after fluorescent staining for mannan, chitin, and nuclei (DNA). In most binucleate cells the two nuclei lay close together and divided into the same bud. In a few, however, the nuclei were far apart and one or two buds were formed, each proximal to a nucleus. The proximity of daughter nuclei in most blocked cdc24–1 cells suggests a role for the CDC24 gene product in spindle elongation. The relationship between the nuclei and the number and location of buds supports the theory of a preponderant role for the nucleus in budding. Although buds develop preferentially in regions of low chitin content in kar1 heterokaryons, the ability of cdc24–1 cells to bud even with a uniformly high content of chitin and mannan suggests a minor role for these cell wall constituents in determining the sites of bud emergence. The chitin ring is not needed for bud emergence but seems to play a role in normal bud development and in septum formation. Electron microscopy of cdc24–1 cells blocked (37 °C) for 8 h and released (23 °C) for 30 min showed morphologically normal spindle pole bodies, cytoplasmic microtubules, and intranuclear spindles. Although the chitin ring was absent, the ring of 10-nm filaments was present, consistent with its proposed role in bud emergence.

scholarly journals Absence of microtubule sliding and an analysis of spindle formation and elongation in isolated mitotic spindles from the yeast Saccharomyces cerevisiae.

1982 ◽  
Vol 94 (2) ◽  
pp. 341-349 ◽  
Author(s):  
S M King ◽  
J S Hyams ◽  
A Luba
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Mitotic Spindles ◽  
Microtubule Organization ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Formation ◽  
Detailed Model ◽  
Thin Sections ◽  
Gold Thioglucose

Mitotic spindles were isolated from a cell division cycle mutant of the budding yeast Saccharomyces cerevisiae by the lysis of sphateroplasts on an air:buffer interface and were negatively stained with 1% gold thioglucose. Isolated spindles were incubated under conditions which promoted the sliding disintegration of parallel preparations of Tetrahymena axonemes, namely the addition of ATP to 20 microM. In no experiment was a corresponding change in microtubule organization of the spindle observed even when spindles were first pretreated with either 1-10 microgram/ml trypsin or 0.2-2% Triton X-100. During these experiments a number of spindles were isolated from cells that had passed through the imposed temperature block, and from the images obtained a detailed model of spindle formation and elongation has been constructed. Two sets of microtubules, one from each spindle pole body (SPB), completely interdigitate to form a continuous bundle, and a series of discontinuous microtubules are then nucleated by each SPB. As the spindle elongates, the number of microtubules continuous between the two SPBs decreases until, at a length of 4 micrometer, only one remains. The spindle, composed of only one microtubule, continues to elongate until it reaches the maximal nuclear dimension of 8 micrometer. The data obtained from negatively stained preparations have been verified in thin sections of wild-type cells. We suggest that, as in the later stages of mitosis only one microtubule is involved in the separation of the spindle poles, the microtubular spindle in S. cerevisiae is not a force-generating system but rather acts as a regulatory mechanism controlling the rate of separation.

scholarly journals Functional cooperation of Dam1, Ipl1, and the inner centromere protein (INCENP)–related protein Sli15 during chromosome segregation

2001 ◽  
Vol 155 (5) ◽  
pp. 763-774 ◽  
Author(s):  
Jung-seog Kang ◽  
Iain M. Cheeseman ◽  
George Kallstrom ◽  
Soundarapandian Velmurugan ◽  
Georjana Barnes ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Chromosome Segregation ◽  
Mitotic Spindle ◽  
Kinase Activity ◽  
Related Protein ◽  
Centromeric Dna ◽  
Centromere Protein ◽  
Kinetochore Function

We have shown previously that Ipl1 and Sli15 are required for chromosome segregation in Saccharomyces cerevisiae. Sli15 associates directly with the Ipl1 protein kinase and these two proteins colocalize to the mitotic spindle. We show here that Sli15 stimulates the in vitro, and likely in vivo, kinase activity of Ipl1, and Sli15 facilitates the association of Ipl1 with the mitotic spindle. The Ipl1-binding and -stimulating activities of Sli15 both reside within a region containing homology to the metazoan inner centromere protein (INCENP). Ipl1 and Sli15 also bind to Dam1, a microtubule-binding protein required for mitotic spindle integrity and kinetochore function. Sli15 and Dam1 are most likely physiological targets of Ipl1 since Ipl1 can phosphorylate both proteins efficiently in vitro, and the in vivo phosphorylation of both proteins is reduced in ipl1 mutants. Some dam1 mutations exacerbate the phenotype of ipl1 and sli15 mutants, thus providing evidence that Dam1 interactions with Ipl1–Sli15 are functionally important in vivo. Similar to Dam1, Ipl1 and Sli15 each bind to microtubules directly in vitro, and they are associated with yeast centromeric DNA in vivo. Given their dual association with microtubules and kinetochores, Ipl1, Sli15, and Dam1 may play crucial roles in regulating chromosome–spindle interactions or in the movement of kinetochores along microtubules.

Sign in / Sign up

Export Citation Format

Share Document