THE EFFECTS OF A MULTIFUNCTIONAL ADDITIVE ON CURING CHARACTERISTICS, MECHANICAL PROPERTIES, AND SWELLING BEHAVIOR OF NATURAL RUBBER/POLYCHLOROPRENE RUBBER BLENDS

2001 ◽  
Vol 40 (4) ◽  
pp. 505-517 ◽  
Author(s):  
H. Ismail ◽  
C. L. Ho ◽  
C. C. Lim
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Swelling Behavior ◽  
Multifunctional Additive ◽  
Rubber Blends ◽  
Curing Characteristics

The Effect of Silane Coupling Agent on the Properties of Natural Rubber Filled with Waste Silicon Carbide

2017 ◽  
Vol 737 ◽  
pp. 236-241
Author(s):  
Apaipan Rattanapan ◽  
Pornsri Sapsrithong ◽  
Surakit Tuampoemsab
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Natural Rubber ◽  
Abrasion Resistance ◽  
Swelling Behavior ◽  
Peak Hardness ◽  
Rubber Compounds ◽  
Curing Characteristics ◽  
Silane Coupling ◽  
Cure Time

The effect of a silane coupling on curing characteristics, mechanical properties, abrasion behavior and swelling behavior of waste silicon carbide filled natural rubber compounds was investigated in the concentration 3%, 6%, 9%, 12% and 15% by weight of the particles. The waste silicon carbide content in this study was fixed at 30 phr in order to reveal the influence of silane-69 used to modify silicon carbide. The rubber compounds were prepared using a laboratory two roll mill with temperature maintained at 50°C. The curing characteristics of the composites were determined and the composites were vulcanized at 160°C using a hot press. The properties of the natural rubber compounds such as modulus at 200% elongation, stress at peak, hardness, abrasion resistance and swelling behavior were studied. Results indicate that the maximum torque of the natural rubber compounds increased with increasing silane-69 content whereas the silane-69 can be used without much effect on the scorch time and cure time. Increasing silane-69 content also gives natural rubber compounds better resistance towards swelling and increases the modulus at 200% elongation, tensile strength, hardness and abrasion resistance. The dispersion morphology of silicon carbide in the natural rubber composites was observed by scanning electron microscopy. The modified particles with improved interfacial adhesion between waste silicon carbide and natural rubber. Improvement in mechanical properties of the composites was obtained.

scholarly journals Rheometer Evidences for the Co-Curing Effect of a Bismaleimide in Conjunction with the Accelerated Sulfur on Natural Rubber/Chloroprene Rubber Blends

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1510
Author(s):  
Marek Pöschl ◽  
Shibulal Gopi Sathi ◽  
Radek Stoček ◽  
Ondřej Kratina
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Tensile Properties ◽  
Crosslinking Agent ◽  
Alder Reaction ◽  
Diels Alder ◽  
Ene Reactions ◽  
Rubber Blends ◽  
Diels Alder Reaction ◽  
Chloroprene Rubber

The rheometer curing curves of neat natural rubber (NR) and neat chloroprene rubber (CR) with maleide F (MF) exhibit considerable crosslinking torque at 180 °C. This indicates that MF can crosslink both these rubbers via Alder-ene reactions. Based on this knowledge, MF has been introduced as a co-crosslinking agent for a 50/50 blend of NR and CR in conjunction with accelerated sulfur. The delta (Δ) torque obtained from the curing curves of a blend with the addition of 1 phr MF was around 62% higher than those without MF. As the content of MF increased to 3 phr, the Δ torque was further raised to 236%. Moreover, the mechanical properties, particularly the tensile strength of the blend with the addition of 1 phr MF in conjunction with the accelerated sulfur, was around 201% higher than the blend without MF. The overall tensile properties of the blends cured with MF were almost retained even after ageing the samples at 70 °C for 72 h. This significant improvement in the curing torque and the tensile properties of the blends indicates that MF can co-crosslink between NR and CR via the Diels–Alder reaction.

scholarly journals Detailed Study on the Mechanical Properties and Activation Energy of Natural Rubber/Chloroprene Rubber Blends during Aging Processes

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Quang Nguyen Trong ◽  
Hung Dang Viet ◽  
Linh Nguyen Pham Duy ◽  
Chuong Bui ◽  
Duong Duc La
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Dynamic Loading ◽  
Dynamic Properties ◽  
Activation Energies ◽  
Rubber Matrix ◽  
Static Properties ◽  
Rubber Blends ◽  
Aging Conditions ◽  
Mechanical Aging

Selection of a suitable thermal aging process could render desirable mechanical properties of the rubbers or blended rubbers. In this work, the effect of the aging processes on the mechanical properties and activation energies of natural rubbers (NR) and NR/chloroprene rubbers (CR) blends with low CR contents (5–10%) was investigated. Three aging processes including heat aging (at 110°C for 22 hours), mechanical aging (under dynamic loading to 140% strain for 16000 cycles), and complex aging (heat and mechanical aging) were studied. The results revealed that the compatibility of CR in natural rubber matrix had a significant effect on the dynamic properties of the blended rubber and negligible effect on the static properties. The changes in activation energies of the blended rubber during aging processes were calculated using Arrhenius relation. The calculated changes (ΔUc, ΔUd, and ΔUT) in activation energies were consistent with the results of mechanical properties of the blended rubber. Interestingly, the change in activation energies using complex aging conditions (ΔUc) was mostly equal to the total changes in activation energies calculated separately from heat aging (ΔUT) and mechanical aging (ΔUd) conditions. This indicates that, in complex aging conditions, the heat and dynamic loading factors act independently on the properties of the blended rubber.

Sign in / Sign up

Export Citation Format

Share Document