NUMERICAL STUDY OF LAMINAR NATURAL CONVECTION IN INCLINED RECTANGULAR ENCLOSURES OF VARIOUS ASPECT RATIOS

2003 ◽  
Vol 44 (4) ◽  
pp. 355-373 ◽  
Author(s):  
M. Rahman ◽  
M. A. R. Sharif
Keyword(s):  
Natural Convection ◽  
Numerical Study ◽  
Aspect Ratios ◽  
Laminar Natural Convection

Laminar Natural Convection in Isosceles Triangular Enclosures Heated From Below and Symmetrically Cooled From Above

2000 ◽  
Vol 122 (3) ◽  
pp. 485-491 ◽  
Author(s):  
G. A. Holtzman ◽  
R. W. Hill ◽  
K. S. Ball
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Study ◽  
Pitchfork Bifurcation ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Aspect Ratios ◽  
Triangular Enclosure ◽  
Laminar Natural Convection ◽  
Flow Symmetry

A numerical study of natural convection in an isosceles triangular enclosure with a heated horizontal base and cooled upper walls is presented. Nearly every previous study conducted on this subject to date has assumed that the geometric plane of symmetry is also a plane of symmetry for the flow. This problem is re-examined over aspect ratios ranging from 0.2 to 1.0 and Grashof numbers from 103 to 105. It is found that a pitchfork bifurcation occurs at a critical Grashof number for each of the aspect ratios considered, above which the symmetric solutions are unstable to finite perturbations and asymmetric solutions are instead obtained. Results are presented detailing the occurrence of the pitchfork bifurcation in each of the aspect ratios considered, and the resulting flow patterns are described. A flow visualization study is used to validate the numerical observations. Computed local and mean heat transfer coefficients are also presented and compared with results obtained when flow symmetry is assumed. Differences in local values of the Nusselt number between asymmetric and symmetric solutions are found to be more than 500 percent due to the shifting of the buoyancy-driven cells. [S0022-1481(00)02503-2]

scholarly journals Numerical Study of Laminar Natural Convection in an Arch Enclosure Filled with Al2O3-Water Based Nanofluid

2016 ◽  
Vol 9 (6) ◽  
pp. 1927-1936 ◽  
Author(s):  
Manoj Kumar Triveni ◽  
Dipak Sen ◽  
Rajsekhar Panua ◽  
◽  
◽  
...  
Keyword(s):  
Natural Convection ◽  
Numerical Study ◽  
Water Based ◽  
Laminar Natural Convection

The Effect of the Top Wall Temperature on the Laminar Natural Convection in Rectangular Cavities With Different Aspect Ratios

2009 ◽  
Vol 131 (5) ◽  
Author(s):  
Wenjiang Wu ◽  
Chan Y. Ching
Keyword(s):  
Natural Convection ◽  
Aspect Ratio ◽  
Wall Temperature ◽  
Vertical Wall ◽  
Flow Region ◽  
Temperature Profiles ◽  
Aspect Ratios ◽  
Vertical Walls ◽  
C And N ◽  
Laminar Natural Convection

The effect of the top wall temperature on the laminar natural convection in air-filled rectangular cavities driven by a temperature difference across the vertical walls was investigated for three different aspect ratios of 0.5, 1.0, and 2.0. The temperature distributions along the heated vertical wall were measured, and the flow patterns in the cavities were visualized. The experiments were performed for a global Grashof number of approximately 1.8×108 and nondimensional top wall temperatures from 0.52 (insulated) to 1.42. As the top wall was heated, the flow separated from the top wall with an undulating flow region in the corner of the cavity, which resulted in a nonuniformity in the temperature profiles in this region. The location and extent of the undulation in the flow are primarily determined by the top wall temperature and nearly independent of the aspect ratio of the cavity. The local Nusselt number was correlated with the local Rayleigh number for all three cavities in the form of Nu=C⋅Ran, but the values of the constants C and n changed with the aspect ratio.

Three-Dimensional Steady and Oscillatory Natural Convection in a Rectangular Enclosure With Heat Sources

2016 ◽  
Vol 138 (9) ◽  
Author(s):  
Amin Bouraoui ◽  
Rachid Bessaïh
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Numerical Study ◽  
Three Dimensional ◽  
Air Cooling ◽  
Heat Sources ◽  
Rectangular Enclosure ◽  
Aspect Ratios ◽  
Simpler Algorithm ◽  
Strong Relation

In this paper, a numerical study of three-dimensional (3D) natural convection air-cooling of two identical heat sources, simulating electronic components, mounted in a rectangular enclosure was carried out. The governing equations were solved by using the finite-volume method based on the SIMPLER algorithm. The effects of Rayleigh number Ra, spacing between heat sources d, and aspect ratios Ax in x-direction (horizontal) and Az in z-direction (transversal) of the enclosure on heat transfer were investigated. In steady state, when d is increased, the heat transfer is more important than when the aspect ratios Ax and Az are reduced. In oscillatory state, the critical Rayleigh numbers Racr for different values of spacing between heat sources and their aspect ratios, at which the flow becomes time dependent, were obtained. Results show a strong relation between heat transfers, buoyant flow, and boundary layer. In addition, the heat transfer is more important at the edge of each face of heat sources than at the center region.

Numerical Study of Three-Dimensional Oscillatory Natural Convection at Low Prandtl Number in Rectangular Enclosures

2000 ◽  
Vol 123 (1) ◽  
pp. 77-83 ◽  
Author(s):  
Shunichi Wakitani
Keyword(s):  
Natural Convection ◽  
Prandtl Number ◽  
Numerical Study ◽  
Three Dimensional ◽  
Width Ratio ◽  
Three Dimensional Flow ◽  
Longitudinal Vortices ◽  
Aspect Ratios ◽  
Vertical Walls ◽  
Prandtl Numbers

Numerical investigations are presented for three-dimensional natural convection at low Prandtl numbers (Pr) from 0 to 0.027 in rectangular enclosures with differentially heated vertical walls. Computations are carried out for the enclosures with aspect ratios (length/height) 2 and 4, and width ratios (width/height) ranging from 0.5 to 4.2. Dependence of the onset of oscillation on the Prandtl number, the aspect ratio, and the width ratio is investigated. Furthermore, oscillatory, three-dimensional flow structure is clarified. The structure is characterized by some longitudinal vortices (rolls) as well as cellular pattern.

A Numerical Study of Laminar Natural Convection in Shallow Cavities

1981 ◽  
Vol 103 (2) ◽  
pp. 226-231 ◽  
Author(s):  
G. S. Shiralkar ◽  
C. L. Tien
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Prandtl Number ◽  
Liquid Metals ◽  
Numerical Study ◽  
Aspect Ratios ◽  
Shallow Cavities ◽  
Horizontal Cavity ◽  
Side Walls ◽  
Prandtl Numbers

Heat transfer by natural convection in a horizontal cavity with adiabatic horizontal walls and isothermal side walls is investigated numerically for high aspect ratios (width/height). Comparison is made with existing analytical and experimental results. Agreement is generally good at moderate and high Prandtl numbers to which most previous works have been restricted. Improvements of the existing correlation have been proposed in regions of discrepancy. Extension to the low Prandtl number case, including the range of liquid metals, has been made on the basis of an analytical model for high Rayleigh numbers as well as by numerical solution of the full equations. The agreement between the two is found to be very good. A correlation for the heat transfer is proposed for each of the two different cases of high and low Prandtl number.

Laminar Natural Convection in a Discretely Heated Cavity: I—Assessment of Three-Dimensional Effects

1995 ◽  
Vol 117 (4) ◽  
pp. 902-909 ◽  
Author(s):  
T. J. Heindel ◽  
S. Ramadhyani ◽  
F. P. Incropera
Keyword(s):  
Natural Convection ◽  
Vertical Wall ◽  
Three Dimensional ◽  
Companion Paper ◽  
Two Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Nusselt Numbers ◽  
Aspect Ratios ◽  
Laminar Natural Convection

Two and three-dimensional calculations have been performed for laminar natural convection induced by a 3 × 3 array of discrete heat sources flush-mounted to one vertical wall of a rectangular cavity whose opposite wall was isothermally cooled. Edge effects predicted by the three-dimensional model yielded local and average Nusselt numbers that exceeded those obtained from the two-dimensional model, as well as average surface temperatures that were smaller than the two-dimensional predictions. For heater aspect ratios Ahtr ≲ 3, average Nusselt numbers increased with decreasing Ahtr. However, for Ahtr ≳ 3, the two and three-dimensional predictions were within 5 percent of each other and results were approximately independent of Ahtr. In a companion paper (Heindel et al., 1995a), predictions are compared with experimental results and heat transfer correlations are developed.

Sign in / Sign up

Export Citation Format

Share Document