In vitro culture of tetrathyridia of Mesocestoides corti using a gel based diphasic medium

2002 ◽  
Vol 76 (1) ◽  
pp. 21-25 ◽  
Author(s):  
J. Chernin ◽  
D. Thompson ◽  
D. Swaine

AbstractTetrathyridia of Mesocestoides corti were cultured in vitro in a diphasic medium consisting of a liquid medium (CMRL Sigma) and a thixotropic nutrient gel (Oxoid). Tests demonstrated that a 50% medium/gel mixture produced optimum conditions for the survival and development of tetrathyridia. Established anthelminthic drugs were inoculated into the gel which demonstrated that this system can be used for preliminary anthelminthic drug screening. The development and survival of the tetrathyridia were influenced by the addition of pepsin, trypsin and liver peptone to the culture media. The development and maturation of proglottids were observed in addition to asexual reproduction by the process of budding. Tetrathyridia maintained in vitro and reinfected into both mouse and rat hosts retained their viability.

2021 ◽  
Vol 2 (2) ◽  
pp. 538-553
Author(s):  
Natacha Coelho ◽  
Alexandra Filipe ◽  
Bruno Medronho ◽  
Solange Magalhães ◽  
Carla Vitorino ◽  
...  

In vitro culture is an important biotechnological tool in plant research and an appropriate culture media is a key for a successful plant development under in vitro conditions. The use of natural compounds to improve culture media has been growing and biopolymers are interesting alternatives to synthetic compounds due to their low toxicity, biodegradability, renewability, and availability. In the present study, different culture media containing one biopolymer (chitosan, gum arabic) or a biopolymer derivative [hydroxyethyl cellulose (HEC), carboxymethyl cellulose (CMC)], at 100 or 1000 mg L−1, were tested regarding their influence on the growth and physiological responses of Thymus lotocephalus in vitro culture. Cellulose-based biopolymers (HEC and CMC) and gum arabic were used for the first time in plant culture media. The results showed that CMC at 100 mg L−1 significantly improved shoot elongation while chitosan, at the highest concentration, was detrimental to T. lotocephalus. Concerning only the evaluated physiological parameters, all tested biopolymers and biopolymer derivatives are safe to plants as there was no evidence of stress-induced changes on T. lotocephalus. The rheological and microstructural features of the culture media were assessed to understand how the biopolymers and biopolymer derivatives added to the culture medium could influence shoot growth. As expected, all media presented a gel-like behaviour with minor differences in the complex viscosity at the beginning of the culture period. Most media showed increased viscosity overtime. The surface area increased with the addition of biopolymers and biopolymer derivatives to the culture media and the average pore size was considerably lower for CMC at 100 mg L−1. The smaller pores of this medium might be related to a more efficient nutrients and water uptake by T. lotocephalus shoots, leading to a significant improvement in shoot elongation. In short, this study demonstrated that the different types of biopolymers and biopolymer derivatives added to culture medium can modify their microstructure and at the right concentrations, are harmless to T. lotocephalus shoots growing in vitro, and that CMC improves shoot length.


2015 ◽  
Vol 6 (1) ◽  
Author(s):  
Zubeir M. Golamaully ◽  
Vishwakalyan Bhoyroo ◽  
Nadeem Nazurally ◽  
Vineshwar Gopal

With the ever growing population and economic needs of Mauritius, the flora of Mauritius has never been in more danger and one group of vascular plants is even more in peril; ferns.<em> Diplazium proliferum</em> is indigenous to the Mascarene region and is considered as a rare species in Mauritius. The need to develop a tested <em>in vitro</em> propagation protocol is a must to protect the biodiversity of Mauritius. This experiment was geared towards the establishment of a proper sterilization technique and the effect of 6-benzylaminopurine (BAP) and light on <em>in vitro</em> culture of this fern. Sterilization with 0.05% Mercuric chloride was effective to eliminate fungal contamination and allow germination of spores. Culture media supplemented with BAP did not significantly increase growth rate of both gametophytes and sporophytes of<em> D. proliferum</em>. Present results suggest efficient sterilization methods to be a crucial stage for successful<em> in vitro r</em>egeneration of ferns. The established protocol will be used as an optimized baseline protocol for the propagation of other indigenous ferns.


Antioxidants ◽  
2020 ◽  
Vol 9 (3) ◽  
pp. 210 ◽  
Author(s):  
Pascual García-Pérez ◽  
Eva Lozano-Milo ◽  
Mariana Landín ◽  
Pedro Pablo Gallego

We combined machine learning and plant in vitro culture methodologies as a novel approach for unraveling the phytochemical potential of unexploited medicinal plants. In order to induce phenolic compound biosynthesis, the in vitro culture of three different species of Bryophyllum under nutritional stress was established. To optimize phenolic extraction, four solvents with different MeOH proportions were used, and total phenolic content (TPC), flavonoid content (FC) and radical-scavenging activity (RSA) were determined. All results were subjected to data modeling with the application of artificial neural networks to provide insight into the significant factors that influence such multifactorial processes. Our findings suggest that aerial parts accumulate a higher proportion of phenolic compounds and flavonoids in comparison to roots. TPC was increased under ammonium concentrations below 15 mM, and their extraction was maximum when using solvents with intermediate methanol proportions (55–85%). The same behavior was reported for RSA, and, conversely, FC was independent of culture media composition, and their extraction was enhanced using solvents with high methanol proportions (>85%). These findings confer a wide perspective about the relationship between abiotic stress and secondary metabolism and could serve as the starting point for the optimization of bioactive compound production at a biotechnological scale.


2017 ◽  
Vol 95 (suppl_4) ◽  
pp. 231-231
Author(s):  
N. C. Negota ◽  
L. P. Nethenzheni ◽  
N. R. Serota

2017 ◽  
Vol 29 (1) ◽  
pp. 188
Author(s):  
N. C. Negota ◽  
L. P. Nethenzheni ◽  
M. L. Mphaphathi ◽  
D. M. Barry ◽  
T. L. Nedambale

The in vitro culture media and assisted hatching techniques remain challenging obstacles to be utilised widely. Mechanical, chemical, enzymatic thinning, and laser-assisted techniques have been used previously but information is still lacking on its application in livestock. The aim of this study was to compare the effect of 2 in vitro culture media (Hamster F10 and TMC-199) and 4 (mechanical, chemical, enzymatic, and laser) assisted hatching techniques on blastocyst formation and hatching rate using murine embryos as a model. The C57/b and Balb/c breeds were raised until they reached maturity and bred naturally to produce F1 generation. The light in the breeding house was controlled at 14 h light and 10 h dark. Feed and water were provided ad libitum for the mice. Superovulation of females were stimulated using equine chorionic gonadotropin and human chorionic gonadotropin. The F1 generation was used for the collection of the 400 blastocysts and randomly allocated into 4 assisted hatching techniques. Blastocysts were paired into a group of 10 and replicated 4 times for each assisted hatching technique. The general linear model of SAS version 9.4 (SAS Institute Inc., Cary, NC, USA) was used to analyse the data. Assisted hatching techniques of laser, mechanical, enzymatic, and chemical yielded 46.9 ± 37.1, 51.1 ± 40.2, 39.1 ± 35.8, and 33.3 ± 4.5%, respectively, under in vitro culture of Hamster F10. The TCM-199, laser, mechanical, enzymatic, and chemical assisted hatching techniques yielded 56.3 ± 43.3, 52.6 ± 35.5, 49.2 ± 37.5, and 33.9 ± 35.5%, respectively, with a significant difference. There was no significant difference observed in assisted hatching techniques and Hamster F10 culture medium. However, the hatching rate of embryos for all techniques was higher when in vitro cultured in TCM than cultured in Hamster F10. Hatching rate of blastocysts increased from chemical, enzymatic, mechanical, and laser with response to Hamster F10 and TCM; thus, laser is a suitable assisted hatching technique with TCM-199.


2019 ◽  
Vol 41 (1) ◽  
Author(s):  
Samila Silva Camargo ◽  
Leo Rufato ◽  
Maicon Magro ◽  
André Luiz Kulkamp de Souza

Abstract The in vitro propagation technique via temporary immersion bioreactors is a tool that, through the culture in a liquid medium, allows an increase in the efficiency of seedling production. Several researches with the strawberry crop have shown greater efficiency of the system compared to the conventional process of micropropagation in solid medium. In this sense, the objective herein was to establish a protocol of multiplication and rooting of the ‘Pircinque’ strawberry, in temporary immersion bioreactors. Two distinct and independent studies were carried out, characterized by the multiplication and rooting stages of strawberry explants, newly introduced and registered in Brazil. Two culture media (MS and KNOP) were studied and, as a control treatment, the growth of the explants in solid culture medium was evaluated with the addition of 5 g L-1 of agar. Different immersion times of the culture medium were explored: five or eight times a day, for 15 minutes. The study was composed of the culture medium and immersion time factors, as well as the control (solid) treatment. It was verified that the use of temporary immersion bioreactors system is an efficient technique for the multiplication and rooting of explants of strawberry cv. Pircinque, when compared to the conventional method of micropropagation with the use of solid culture medium, making it possible to optimize the production of seedlings in biofactories. The MS liquid medium, in contact with explants of ‘Pircinque’ strawberry five times a day, increased the growth of the aerial part and the root system.


1970 ◽  
Vol 35 (1) ◽  
pp. 135-142 ◽  
Author(s):  
MA Malek ◽  
D Khanam ◽  
M Khatun ◽  
MH Molla ◽  
MA Mannan

An experiment was conducted to study the in vitro culture of pointed gourd. Cotyledon rescued from physiologically matured seeds (PMS) and immatured seeds (IMS) of pointed gourd were used as explants. Cotyledon excised from PMS responded very well in all culture conditions. Plant regenerated from cotyledon of PMS ranged from 38 to 96% in different hormonal formulations of culture media. Highest percentage of shoot regeneration was observed in MS + 1.0 mg/l BAP and lowest in MS + 2.5 mg/l BAP. No plant regeneration was observed in cotyledon from immatured seeds. The highest percentage of root induction (99%) was achieved in half MS medium supplemented with 0.5 mg/l NAA. The regenerated plantlets were successfully established in earthen pot. Keywords: Cotyledon; in vitro; pointed gourd. DOI: 10.3329/bjar.v35i1.5874Bangladesh J. Agril. Res. 35(1) : 135-142, March 2010


2004 ◽  
Vol 16 (2) ◽  
pp. 195
Author(s):  
Y.H. Choi ◽  
D.D. Varner ◽  
K. Hinrichs

Research on in vitro culture of equine embryos has been scant, due to failure of equine in vitro fertilization to be repeatably successful. We have recently obtained high fertilization rates of equine oocytes via intracytoplasmic sperm injection (ICSI) using a piezo drill (Choi et al., 2002 Reproduction 123, 455–465). Culture of presumptive zygotes in G1.2/2.2 medium resulted in 63% cleavage and an average of 15 cells at 4d, but only 2 to 9% blastocyst development at 7 days (Choi et al., 2003 Theriogenology 59, 1219–1229). In the present study, we evaluated the effect of two different culture media, G1.3/G2.3 v. DMEM/F-12, with or without FBS, on blastocyst development after ICSI. Oocytes were collected from slaughterhouse-derived ovaries by follicular scraping and were matured in vitro for 24h in M199 with 10% FBS and 5μUmL−1 FSH. After culture, oocytes having a polar body (198/305; 65%) were fertilized by ICSI with frozen-thawed equine sperm using a piezo drill. Presumptive zygotes were cultured in 1 of 4 media: G1.3/G2.3 (which includes 0.8% BSA) with or without 10% FBS, or in DMEM/F-12 with 0.5% BSA, with or without 10% FBS. Culture was performed in microdroplets at 5μL/zygote under oil at 38.2°C in an atmosphere of 5% CO2, 5% O2 and 90% N2 for 7.5 days. In G1.3/2.3 treatments, G1.3 media were completely refreshed at 48h, zygotes were transferred to G2.3 (with or without FBS as per the first stage) at 96h, and were completely refreshed with the same media at 144h. In DMEM/F-12 treatments, media were completely refreshed every other day. Three to 5 replicates were performed in each treatment, and data were analyzed by chi-square test. There were no significant differences in cleavage rates (59–64%) among treatments. The rate of development to blastocyst, per oocyte injected, in G1.3/G2.3/BSA (1/49, 2%) was significantly lower (P&lt;0.05) than that for the other three treatments: G1.3/2.3/BSA/FBS (9/49, 18%), DMEM/F-12/BSA (9/50, 18%), or DMEM/F-12/BSA/FBS (10/50, 20%). There was no significant difference in blastocyst development among the latter three treatments. These findings indicate that G1.3/2.3 media with BSA only do not adequately support growth of equine embryos. Development of up to 20% of injected oocytes to the blastocyst stage in G media supplemented with FBS, in DMEM/F-12/BSA or in DMEM/F-12/BSA/FBS represents the highest in vitro equine blastocyst rate in medium alone (i.e. without co-culture) yet reported. The success of DMEM/F-12 as an embryo culture medium may provide a relatively simple basis for equine in vitro culture programs. To determine whether this medium was able to support further developmental competence, we cultured equine embryos resulting from nuclear transfer of in vitro-matured oocytes in DMEM/F-12+10% FBS (without BSA). We transferred 4 resulting blastocysts to recipient mares by transcervical transfer; one pregnancy is ongoing at 230d gestation at the time of this writing. This work was supported by the Link Equine Research Endowment Fund, Texas A&amp;M University.


Sign in / Sign up

Export Citation Format

Share Document