scholarly journals Single Molecule Kinetic Analysis of Actin Filament Capping

2007 ◽  
Vol 282 (38) ◽  
pp. 28014-28024 ◽  
Author(s):  
Jeffrey R. Kuhn ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Rate Constant ◽  
Single Molecule ◽  
Actin Filaments ◽  
Total Internal Reflection ◽  
Dissociation Rate ◽  
Actin Binding ◽  
Capping Protein ◽  
Capping Proteins ◽  
Binding Surface

We investigated how heterodimeric capping proteins bind to and dissociate from the barbed ends of actin filaments by observing single muscle actin filaments by total internal reflection fluorescence microscopy. The barbed end rate constants for mouse capping protein (CP) association of 2.6 × 106m-1 s-1 and dissociation of 0.0003 s-1 agree with published values measured in bulk assays. The polyphosphoinositides (PPIs), phosphatidylinositol 3,4-bisphosphate (PI(3,4)P2), PI(4,5)P2, and PI(3,4,5)P3, prevent CP from binding to barbed ends, but three different assays showed that none of these lipids dissociate CP from filaments at concentrations that block CP binding to barbed ends. The affinity of fission yeast CP for barbed ends is a thousandfold less than mouse CP, because of a slower association rate constant (1.1 × 105m-1 s-1) and a faster dissociation rate constant (0.004 s-1). PPIs do not inhibit binding of fission yeast CP to filament ends. Comparison of homology models revealed that fission yeast CP lacks a large patch of basic residues along the actin-binding surface on mouse CP. PPIs binding to this site might interfere sterically with capping, but this site would be inaccessible when CP is bound to the end of a filament.

scholarly journals Actin turnover–dependent fast dissociation of capping protein in the dendritic nucleation actin network: evidence of frequent filament severing

2006 ◽  
Vol 175 (6) ◽  
pp. 947-955 ◽  
Author(s):  
Takushi Miyoshi ◽  
Takahiro Tsuji ◽  
Chiharu Higashida ◽  
Maud Hertzog ◽  
Akiko Fujita ◽  
...  
Keyword(s):  
Single Molecule ◽  
Actin Filaments ◽  
Dissociation Rate ◽  
Actin Network ◽  
Lim Kinase ◽  
Capping Protein ◽  
Filament Dynamics ◽  
Actin Turnover ◽  
Kinetics Of

Actin forms the dendritic nucleation network and undergoes rapid polymerization-depolymerization cycles in lamellipodia. To elucidate the mechanism of actin disassembly, we characterized molecular kinetics of the major filament end-binding proteins Arp2/3 complex and capping protein (CP) using single-molecule speckle microscopy. We have determined the dissociation rates of Arp2/3 and CP as 0.048 and 0.58 s−1, respectively, in lamellipodia of live XTC fibroblasts. This CP dissociation rate is three orders of magnitude faster than in vitro. CP dissociates slower from actin stress fibers than from the lamellipodial actin network, suggesting that CP dissociation correlates with actin filament dynamics. We found that jasplakinolide, an actin depolymerization inhibitor, rapidly blocked the fast CP dissociation in cells. Consistently, the coexpression of LIM kinase prolonged CP speckle lifetime in lamellipodia. These results suggest that cofilin-mediated actin disassembly triggers CP dissociation from actin filaments. We predict that filament severing and end-to-end annealing might take place fairly frequently in the dendritic nucleation actin arrays.

scholarly journals The structure of the actin filament uncapping complex mediated by twinfilin

2021 ◽  
Vol 7 (5) ◽  
pp. eabd5271
Author(s):  
Dennis M. Mwangangi ◽  
Edward Manser ◽  
Robert C. Robinson
Keyword(s):  
Actin Filament ◽  
Protein Interactions ◽  
Protein Complex ◽  
Actin Filaments ◽  
Actin Binding ◽  
Capping Protein ◽  
Binding Surface ◽  
Actin Capping Protein ◽  
Actin Capping

Uncapping of actin filaments is essential for driving polymerization and depolymerization dynamics from capping protein–associated filaments; however, the mechanisms of uncapping leading to rapid disassembly are unknown. Here, we elucidated the x-ray crystal structure of the actin/twinfilin/capping protein complex to address the mechanisms of twinfilin uncapping of actin filaments. The twinfilin/capping protein complex binds to two G-actin subunits in an orientation that resembles the actin filament barbed end. This suggests an unanticipated mechanism by which twinfilin disrupts the stable capping of actin filaments by inducing a G-actin conformation in the two terminal actin subunits. Furthermore, twinfilin disorders critical actin-capping protein interactions, which will assist in the dissociation of capping protein, and may promote filament uncapping through a second mechanism involving V-1 competition for an actin-binding surface on capping protein. The extensive interactions with capping protein indicate that the evolutionary conserved role of twinfilin is to uncap actin filaments.

scholarly journals Myosin and gelsolin cooperate in actin filament severing and actomyosin motor activity

2020 ◽  
pp. jbc.RA120.015863
Author(s):  
Venukumar Vemula ◽  
Tamás Huber ◽  
Marko Ušaj ◽  
Beáta Bugyi ◽  
Alf Mansson
Keyword(s):  
Motor Activity ◽  
Actin Filament ◽  
Single Molecule ◽  
Actin Filaments ◽  
Actin Binding ◽  
In Vitro Motility Assay ◽  
Cooperative Effects ◽  
Myosin Motor ◽  
Filament Dynamics

Actin is a major intracellular protein with key functions in cellular motility, signaling and structural rearrangements. Its dynamic behavior, such as polymerisation and depolymerisation of actin filaments in response to intra- and extracellular cues, is regulated by an abundance of actin binding proteins. Out of these, gelsolin is one of the most potent for filament severing. However, myosin motor activity also fragments actin filaments through motor induced forces, suggesting that these two proteins could cooperate to regulate filament dynamics and motility. To test this idea, we used an in vitro motility assay, where actin filaments are propelled by surface-adsorbed heavy meromyosin (HMM) motor fragments. This allows studies of both motility and filament dynamics using isolated proteins. Gelsolin, at both nanomolar and micromolar Ca2+ concentration, appreciably enhanced actin filament severing caused by HMM-induced forces at 1 mM MgATP, an effect that was increased at higher HMM motor density. This finding is consistent with cooperativity between actin filament severing by myosin-induced forces and by gelsolin. We also observed reduced sliding velocity of the HMM-propelled filaments in the presence of gelsolin, providing further support of myosin-gelsolin cooperativity. Total internal reflection fluorescence microscopy based single molecule studies corroborated that the velocity reduction was a direct effect of gelsolin-binding to the filament and revealed different filament severing pattern of stationary and HMM propelled filaments. Overall, the results corroborate cooperative effects between gelsolin-induced alterations in the actin filaments and changes due to myosin motor activity leading to enhanced F-actin severing of possible physiological relevance.

scholarly journals Dynamics of Tpm1.8 domains on actin filaments with single molecule resolution

2020 ◽  
Author(s):  
Ilina Bareja ◽  
Hugo Wioland ◽  
Miro Janco ◽  
Philip R. Nicovich ◽  
Antoine Jégou ◽  
...  
Keyword(s):  
Actin Filament ◽  
Single Molecule ◽  
Actin Filaments ◽  
High Probability ◽  
Actin Binding ◽  
Single Molecule Level ◽  
Filament Dynamics ◽  
Kinetics Of ◽  
Insight Into

ABSTRACTTropomyosins regulate dynamics and functions of the actin cytoskeleton by forming long chains along the two strands of actin filaments that act as gatekeepers for the binding of other actin-binding proteins. The fundamental molecular interactions underlying the binding of tropomyosin to actin are still poorly understood. Using microfluidics and fluorescence microscopy, we observed the binding of fluorescently labelled tropomyosin isoform Tpm1.8 to unlabelled actin filaments in real time. This approach in conjunction with mathematical modeling enabled us to quantify the nucleation, assembly and disassembly kinetics of Tpm1.8 on single filaments and at the single molecule level. Our analysis suggests that Tpm1.8 decorates the two strands of the actin filament independently. Nucleation of a growing tropomyosin domain proceeds with high probability as soon as the first Tpm1.8 molecule is stabilised by the addition of a second molecule, ultimately leading to full decoration of the actin filament. In addition, Tpm1.8 domains are asymmetrical, with enhanced dynamics at the edge oriented towards the barbed end of the actin filament. The complete description of Tpm1.8 kinetics on actin filaments presented here provides molecular insight into actin-tropomyosin filament formation and the role of tropomyosins in regulating actin filament dynamics.

scholarly journals Torsional stress generated by ADF/cofilin on cross-linked actin filaments boosts their severing

2019 ◽  
Vol 116 (7) ◽  
pp. 2595-2602 ◽  
Author(s):  
Hugo Wioland ◽  
Antoine Jegou ◽  
Guillaume Romet-Lemonne
Keyword(s):  
Simple Model ◽  
Mechanical Stress ◽  
Rate Constant ◽  
Single Molecule ◽  
Actin Filaments ◽  
Torsional Stress ◽  
Local Curvature ◽  
Single Filament ◽  
Filament Networks ◽  
Filament Network

Proteins of the actin depolymerizing factor (ADF)/cofilin family are the central regulators of actin filament disassembly. A key function of ADF/cofilin is to sever actin filaments. However, how it does so in a physiological context, where filaments are interconnected and under mechanical stress, remains unclear. Here, we monitor and quantify the action of ADF/cofilin in different mechanical situations by using single-molecule, single-filament, and filament network techniques, coupled to microfluidics. We find that local curvature favors severing, while tension surprisingly has no effect on cofilin binding and weakly enhances severing. Remarkably, we observe that filament segments that are held between two anchoring points, thereby constraining their twist, experience a mechanical torque upon cofilin binding. We find that this ADF/cofilin-induced torque does not hinder ADF/cofilin binding, but dramatically enhances severing. A simple model, which faithfully recapitulates our experimental observations, indicates that the ADF/cofilin-induced torque increases the severing rate constant 100-fold. A consequence of this mechanism, which we verify experimentally, is that cross-linked filament networks are severed by cofilin far more efficiently than nonconnected filaments. We propose that this mechanochemical mechanism is critical to boost ADF/cofilin’s ability to sever highly connected filament networks in cells.

scholarly journals Fission yeast tropomyosin specifies directed transport of myosin-V along actin cables

2014 ◽  
Vol 25 (1) ◽  
pp. 66-75 ◽  
Author(s):  
Joseph E. Clayton ◽  
Luther W. Pollard ◽  
Maria Sckolnick ◽  
Carol S. Bookwalter ◽  
Alex R. Hodges ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Total Internal Reflection ◽  
Single Molecules ◽  
Myosin V ◽  
Class V ◽  
Physiological Relevance ◽  
Actin Cables

A hallmark of class-V myosins is their processivity—the ability to take multiple steps along actin filaments without dissociating. Our previous work suggested, however, that the fission yeast myosin-V (Myo52p) is a nonprocessive motor whose activity is enhanced by tropomyosin (Cdc8p). Here we investigate the molecular mechanism and physiological relevance of tropomyosin-mediated regulation of Myo52p transport, using a combination of in vitro and in vivo approaches. Single molecules of Myo52p, visualized by total internal reflection fluorescence microscopy, moved processively only when Cdc8p was present on actin filaments. Small ensembles of Myo52p bound to a quantum dot, mimicking the number of motors bound to physiological cargo, also required Cdc8p for continuous motion. Although a truncated form of Myo52p that lacked a cargo-binding domain failed to support function in vivo, it still underwent actin-dependent movement to polarized growth sites. This result suggests that truncated Myo52p lacking cargo, or single molecules of wild-type Myo52p with small cargoes, can undergo processive movement along actin-Cdc8p cables in vivo. Our findings outline a mechanism by which tropomyosin facilitates sorting of transport to specific actin tracks within the cell by switching on myosin processivity.

scholarly journals Evidence for a Conformational Change in Actin Induced by Fimbrin (N375) Binding

1997 ◽  
Vol 139 (2) ◽  
pp. 387-396 ◽  
Author(s):  
Dorit Hanein ◽  
Paul Matsudaira ◽  
David J. DeRosier
Keyword(s):  
Actin Filaments ◽  
Structural Changes ◽  
Three Dimensional ◽  
Binding Domain ◽  
Actin Binding ◽  
Dimensional Structure ◽  
Binding Surface ◽  
Actin Binding Domain ◽  
Actin Structure ◽  
Signal Transduction Proteins

Fimbrin belongs to a superfamily of actin cross-linking proteins that share a conserved 27-kD actin-binding domain. This domain contains a tandem duplication of a sequence that is homologous to calponin. Calponin homology (CH) domains not only cross-link actin filaments into bundles and networks, but they also bind intermediate filaments and some signal transduction proteins to the actin cytoskeleton. This fundamental role of CH domains as a widely used actin-binding domain underlines the necessity to understand their structural interaction with actin. Using electron cryomicroscopy, we have determined the three-dimensional structure of F-actin and F-actin decorated with the NH2-terminal CH domains of fimbrin (N375). In a difference map between actin filaments and N375-decorated actin, one end of N375 is bound to a concave surface formed between actin subdomains 1 and 2 on two neighboring actin monomers. In addition, a fit of the atomic model for the actin filament to the maps reveals the actin residues that line, the binding surface. The binding of N375 changes actin, which we interpret as a movement of subdomain 1 away from the bound N375. This change in actin structure may affect its affinity for other actin-binding proteins and may be part of the regulation of the cytoskeleton itself. Difference maps between actin and actin decorated with other proteins provides a way to look for novel structural changes in actin.

scholarly journals Domain structure in actin-binding proteins: expression and functional characterization of truncated severin.

1991 ◽  
Vol 112 (4) ◽  
pp. 665-676 ◽  
Author(s):  
L Eichinger ◽  
A A Noegel ◽  
M Schleicher
Keyword(s):  
Amino Acids ◽  
Binding Site ◽  
Binding Sites ◽  
Actin Filaments ◽  
Functional Characterization ◽  
Tryptophan Fluorescence ◽  
Border Region ◽  
Actin Binding ◽  
Capping Proteins ◽  
Actin Binding Site

Severin from Dictyostelium discoideum is a Ca2(+)-activated actin-binding protein that severs actin filaments, nucleates actin assembly, and caps the fast growing ends of actin filaments. Sequence comparison with functionally related proteins, such as gelsolin, villin, or fragmin revealed highly conserved domains which are thought to be of functional significance. To attribute the different activities of the severin molecule to defined regions, progressively truncated severin polypeptides were constructed. The complete cDNA coding for 362 (DS362) amino acids and five 3' deletions coding for 277 (DS277), 177 (DS177), 151 (DS151), 117 (DS117), or 111 (DS111) amino acids were expressed in Escherichia coli. The proteins were purified to homogeneity and then characterized with respect to their effects on the polymerization or depolymerization kinetics of G- or F-actin solutions and their binding to G-actin. Furthermore, the Ca2+ binding of these proteins was investigated with a 45Ca-overlay assay and by monitoring Ca2(+)-dependent changes in tryptophan fluorescence. Bacterially expressed DS362 showed the same Ca2(+)-dependent activities as native severin. DS277, missing the 85 COOH-terminal amino acids of severin, had lost its strict Ca2+ regulation and displayed a Ca2(+)-independent capping activity, but was still Ca2+ dependent in its severing and nucleating activities. DS151 which corresponded to the first domain of gelsolin or villin had completely lost severing and nucleating properties. However, a residual severing activity of approximately 2% was detectable if 26 amino acids more were present at the COOH-terminal end (DS177). This locates similar to gelsolin the second actin-binding site to the border region between the first and second domain. Measuring the fluorescence enhancement of pyrene-labeled G-actin in the presence of DS111 showed that the first actin-binding site was present in the NH2-terminal 111 amino acids. Extension by six or more amino acids stabilized this actin-binding site in such a way that DS117 and even more pronounced DS151 became Ca2(+)-independent capping proteins. In comparison to many reports on gelsolin we draw the following conclusions. Among the three active actin-binding sites in gelsolin the closely neighboured sites one and two share the F-actin fragmenting function, whereas the actin-binding sites two and three, which are located in far distant domains, collaborate for nucleation. In contrast, severin contains two active actin-binding sites which are next to each other and are responsible for the severing as well as the nucleating function. The single actin-binding site near the NH2-terminus is sufficient for capping of actin filaments.

scholarly journals Phosphoregulation of tropomyosin is crucial for actin cable turnover and division site placement

2019 ◽  
Vol 218 (11) ◽  
pp. 3548-3559 ◽  
Author(s):  
Saravanan Palani ◽  
Darius V. Köster ◽  
Tomoyuki Hatano ◽  
Anton Kamnev ◽  
Taishi Kanamaru ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Coiled Coil ◽  
Actin Binding ◽  
Division Site ◽  
Actin Cable ◽  
Nonmuscle Cells ◽  
The Stability ◽  
Actin Cables

Tropomyosin is a coiled-coil actin binding protein key to the stability of actin filaments. In muscle cells, tropomyosin is subject to calcium regulation, but its regulation in nonmuscle cells is not understood. Here, we provide evidence that the fission yeast tropomyosin, Cdc8, is regulated by phosphorylation of a serine residue. Failure of phosphorylation leads to an increased number and stability of actin cables and causes misplacement of the division site in certain genetic backgrounds. Phosphorylation of Cdc8 weakens its interaction with actin filaments. Furthermore, we show through in vitro reconstitution that phosphorylation-mediated release of Cdc8 from actin filaments facilitates access of the actin-severing protein Adf1 and subsequent filament disassembly. These studies establish that phosphorylation may be a key mode of regulation of nonmuscle tropomyosins, which in fission yeast controls actin filament stability and division site placement.

scholarly journals The fission yeast cytokinesis formin Cdc12p is a barbed end actin filament capping protein gated by profilin

2003 ◽  
Vol 161 (5) ◽  
pp. 875-887 ◽  
Author(s):  
David R. Kovar ◽  
Jeffrey R. Kuhn ◽  
Andrea L. Tichy ◽  
Thomas D. Pollard
Keyword(s):  
Fission Yeast ◽  
Actin Filaments ◽  
Maximum Yield ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Contractile Ring ◽  
Capping Protein ◽  
Ring Assembly ◽  
End Capping ◽  
Actin Cables

Cytokinesis in most eukaryotes requires the assembly and contraction of a ring of actin filaments and myosin II. The fission yeast Schizosaccharomyces pombe requires the formin Cdc12p and profilin (Cdc3p) early in the assembly of the contractile ring. The proline-rich formin homology (FH) 1 domain binds profilin, and the FH2 domain binds actin. Expression of a construct consisting of the Cdc12 FH1 and FH2 domains complements a conditional mutant of Cdc12 at the restrictive temperature, but arrests cells at the permissive temperature. Cells overexpressing Cdc12(FH1FH2)p stop growing with excessive actin cables but no contractile rings. Like capping protein, purified Cdc12(FH1FH2)p caps the barbed end of actin filaments, preventing subunit addition and dissociation, inhibits end to end annealing of filaments, and nucleates filaments that grow exclusively from their pointed ends. The maximum yield is one filament pointed end per six formin polypeptides. Profilins that bind both actin and poly-l-proline inhibit nucleation by Cdc12(FH1FH2)p, but polymerization of monomeric actin is faster, because the filaments grow from their barbed ends at the same rate as uncapped filaments. On the other hand, Cdc12(FH1FH2)p blocks annealing even in the presence of profilin. Thus, formins are profilin-gated barbed end capping proteins with the ability to initiate actin filaments from actin monomers bound to profilin. These properties explain why contractile ring assembly requires both formin and profilin and why viability depends on the ability of profilin to bind both actin and poly-l-proline.

Sign in / Sign up

Export Citation Format

Share Document