On bias, precision and accuracy in wildlife aerial surveys

2008 ◽  
Vol 35 (4) ◽  
pp. 253 ◽  
Author(s):  
Jim Hone

Bias, precision and accuracy have been studied extensively in wildlife population estimation including aerial surveys. A review of the literature shows that the concepts of bias and precision are used broadly consistently. Aerial survey data from known populations of feral pig carcases and white-tailed deer show that few density estimates are unbiased and precise. Research is needed, however, to clarify how much bias and how much precision are enough for the various types of wildlife management activities. Accuracy is used in two closely related but different ways. One set of definitions of accuracy relates to deviations from the true value (bias) and the second set relates to squared deviations from the true value (bias and precision). The implications are that authors are encouraged to clearly state which definition of accuracy they use, or focus solely on bias and precision.

1986 ◽  
Vol 13 (3) ◽  
pp. 339 ◽  
Author(s):  
A Barnes ◽  
GJE Hill ◽  
GR Wilson

Kangaroo density estimates derived from aerial survey depend on the method of deriving sightability correction factors developed by Caughley. The method depends on five assumptions, some concerned with the mathematical properties of a model for sightability probabilities and others with deriving correction factors from this model. All these assumptions can be criticized. In addition, evidence on the performance of the method does not suggest that it is accurate. Published density estimates are less precise than indicated, and may include biases due to factors not considered in the correction factors used, e.g. seasonal conditions, time of day, and species differences. At present, no satisfactory alternative method of correction exists but, because inaccuracies may be large, continued use of the method requires much greater caution than has previously been shown. This is particularly relevant where density estimates are used to determine management procedures.


2019 ◽  
Vol 46 (8) ◽  
pp. 639 ◽  
Author(s):  
Mark Lethbridge ◽  
Michael Stead ◽  
Cameron Wells

Abstract ContextAerial surveys provide valuable information about the population status and distribution of many native and pest vertebrate species. They are vital for evidence-based monitoring, budget planning and setting management targets. Despite aircraft running costs, they remain one of the most cost-effective ways to capture distribution and abundance data over a broad area. In Australia, annual surveys of large macropods are undertaken in several states to inform management, and in some jurisdictions, to help set commercial kangaroo harvest quotas. Improvements in the cost efficiencies of these surveys are continually sought. Aerial thermal imaging techniques are increasingly being tested for wildlife surveys, but to date no studies have directly compared population data derived from thermal imaging with data collected by human observers during the same flight. AimsDuring an aerial survey of western grey kangaroos (Macropus fuliginosus), eastern grey kangaroos (M. giganteus) and red kangaroos (Osphranter rufus) across the state of Victoria, Australia, the objective was to conduct a direct comparison of the effectiveness of thermal camera technology and human observers for estimating kangaroo populations from aerial surveys. MethodsA thermal camera was mounted alongside an aerial observer on one side of the aircraft for a total of 1360km of transect lines. All thermal footage was reviewed manually. Population density estimates and distance sampling models were compared with human observer counts. Key resultsOverall, the kangaroo density estimates obtained from the thermal camera data were around 30% higher than estimates derived from aerial observer counts. This difference was greater in wooded habitats. Conversely, human-derived counts were greater in open habitats, possibly due to interference from sunlight and flushing. It was not possible to distinguish between species of macropod in the thermal imagery. ConclusionsThermal survey techniques require refining, but the results of the present study suggest that with careful selection of time of day for surveys, more accurate population estimates may be possible than with conventional aerial surveys. ImplicationsConventional aerial surveys may be underestimating animal populations in some habitats. Further studies that directly compare the performance of aerial observers and thermal imaging are required across a range of species and habitats.


2018 ◽  
Vol 6 (3) ◽  
pp. 128-154 ◽  
Author(s):  
M.C. Ferguson ◽  
R.P. Angliss ◽  
A. Kennedy ◽  
B. Lynch ◽  
A. Willoughby ◽  
...  

Manned aerial surveys have been used successfully for decades to collect data to infer cetacean distribution, density (number of whales/km2), and abundance. Unmanned aircraft systems (UAS) have potential to augment or replace some manned aerial surveys for cetaceans. We conducted a three-way comparison among visual observations made by marine mammal observers aboard a Turbo Commander aircraft; imagery autonomously collected by a Nikon D810 camera system mounted to a belly port on the Turbo Commander; and imagery collected by a similar camera system on a remotely controlled ScanEagle® UAS operated by the US Navy. Bowhead whale density estimates derived from the marine mammal observer data were higher than those from the Turbo Commander imagery; comparisons to the UAS imagery depended on survey sector and analytical method. Beluga density estimates derived from either dataset collected aboard the Turbo Commander were higher than estimates derived from the UAS imagery. Uncertainties in density estimates derived from the marine mammal observer data were lower than estimates derived from either imagery dataset due to the small sample sizes in the imagery. The visual line-transect aerial survey conducted by marine mammal observers aboard the Turbo Commander was 68.5% of the cost of the photo strip-transect survey aboard the same aircraft and 9.4% of the cost of the UAS survey.


2020 ◽  
Vol 11 ◽  
Author(s):  
Rikke Guldborg Hansen ◽  
Daniel Pike ◽  
Baldur Thorgilsson ◽  
Thorvaldur Gunnlaugsson ◽  
Jack Lawson

The Geometer is a new handheld USB device that facilitates a relatively accurate measurement of the declination to a target with instantaneous recording of this and other data. The Geometer offers several advantages over traditional clinometers used in aerial surveys, including easier target pinpointing and tracking, more consistent angle measurements, and integration with software data collection packages. In this note we provide technical specifications for the device and its associated software, and describe a new aerial survey data collection programme that takes full advantage of the features of the Geometer. We have tested this device extensively during aerial surveys and highlight the utility of the hardware as well as ways in which the technology could be improved.


2008 ◽  
Vol 22 (6-7) ◽  
pp. 731-747 ◽  
Author(s):  
Jun-ichi Meguro ◽  
Taishi Murata ◽  
Yoshiharu Amano ◽  
Takumi Hasizume ◽  
Jun-ichi Takiguchi

1985 ◽  
Vol 14 (2) ◽  
pp. 157-170
Author(s):  
Ranjan Roy

Presented is a selected review of the literature pertaining to migraine and tension headache of the past thirty or more years. Existence of “migraine” personality is explored. Association between psychiatric disorders and headache is examined. Problems of definition of these concepts are discussed and current thinking to resolve some of the clinical issues of these two types of headaches is presented.


2019 ◽  
Vol 7 (5) ◽  
pp. 1152-1159
Author(s):  
Wael Ibrahim Alsarrani ◽  
Ahmad Jusoh

Purpose: Leadership is an interactive concept that influences our daily lives. A quality concept is an approach and philosophy that leaders use to incorporate the leadership process into the organization successfully. Both concepts have an incremental history, correlation, and discussion. However, the two concepts have not yet been theoretically and empirically integrated. This paper attempts to integrate and discuss leadership and quality to create a single quality leadership style based on the definition of quality gurus and the leadership styles which relate more towards the quality of leadership. Methodology: The study used a systematic literature review to review the past literature related to the field of leadership and quality management. This study provides the constructs from definitions proposed by experts in this field. Each leadership styles have many constructs that may or may not be related to quality. Results: The study proposed a conceptual framework which combined the definitions of quality gurus and the different leadership styles. The finding of this study has contributed to the expansion of theoretical knowledge in the field of quality leadership style. Implications: This paper indicated that the review of the literature regarding what quality gurus define as important relating to leadership. This paper provides the constructs from quality gurus definitions. Novelty: Each leadership styles have many constructs that may or may not be related to quality. Therefore, future studies need to consider what the constructs from those leadership styles are considered effective to quality.


Author(s):  
M. A. Altyntsev ◽  
S. A. Arbuzov ◽  
R. A. Popov ◽  
G. V. Tsoi ◽  
M. O. Gromov

A dense digital surface model is one of the products generated by using UAV aerial survey data. Today more and more specialized software are supplied with modules for generating such kind of models. The procedure for dense digital model generation can be completely or partly automated. Due to the lack of reliable criterion of accuracy estimation it is rather complicated to judge the generation validity of such models. One of such criterion can be mobile laser scanning data as a source for the detailed accuracy estimation of the dense digital surface model generation. These data may be also used to estimate the accuracy of digital orthophoto plans created by using UAV aerial survey data. The results of accuracy estimation for both kinds of products are presented in the paper.


PEDIATRICS ◽  
1993 ◽  
Vol 91 (2) ◽  
pp. 511-512
Author(s):  
DANIEL C. SHANNON ◽  
CARL E. HUNT

In Reply.— Guntheroth and Spiers,1 displeased with our commentary in Pediatrics,2 have raised many issues. However, the key question is whether the scientific data incriminating the prone position as a contributor to SIDS warrant a recommendation to change sleeping position at this time. Based on our critical review of the literature, we conclude that this recommendation was premature and unwarranted. Accepting the current definition of SIDS as the sudden death of an infant that remains unexplained even after a thorough postmortem examination, death scene investigation, and review of the clinical history, one can decide which of the 15 published studies in which a statistical association is described between prone sleeping and SIDS is acceptable.


Sign in / Sign up

Export Citation Format

Share Document