Evaluating the Mid-Infrared Bi-spectral Index for improved assessment of low-severity fire effects in a conifer forest

2018 ◽  
Vol 27 (6) ◽  
pp. 407 ◽  
Author(s):  
T. Ryan McCarley ◽  
Alistair M. S. Smith ◽  
Crystal A. Kolden ◽  
Jason Kreitler
Keyword(s):  
Remote Sensing ◽  
Spectral Index ◽  
Canopy Cover ◽  
Fire Effects ◽  
The United States ◽  
Burn Severity ◽  
Conifer Forest ◽  
Mid Infrared ◽  
Spectral Changes ◽  
Spectral Separability

Remote sensing products provide a vital understanding of wildfire effects across a landscape, but detection and delineation of low- and mixed-severity fire remain difficult. Although data provided by the Monitoring Trends in Burn Severity (MTBS) project are frequently used to assess severity in the United States, alternative indices can offer improvement in the measurement of low-severity fire effects and would be beneficial for future product development and adoption. This research note evaluated one such alternative, the Mid-Infrared Bi-Spectral Index (MIRBI), which was developed in savannah ecosystems to isolate spectral changes caused by burning and reduce noise from other factors. MIRBI, differenced MIRBI (dMIRBI) and burn severity indices used by MTBS were assessed for spectral optimality at distinguishing severity and the ability to differentiate between unburned and burned canopy in a conifer forest. The MIRBI indices were better at isolating changes caused by burning and demonstrated higher spectral separability, particularly at low severity. These findings suggest that MIRBI indices can provide an enhanced alternative or complement to current MTBS products in high-canopy-cover forests for applications such as discernment of fire perimeters and unburned islands, as well as identification of low-severity fire effects.

Validation of remote sensing of burn severity in south-eastern US ecosystems

2011 ◽  
Vol 20 (3) ◽  
pp. 453 ◽  
Author(s):  
Joshua J. Picotte ◽  
Kevin M. Robertson
Keyword(s):  
Remote Sensing ◽  
Wildland Fire ◽  
Ground Truth ◽  
Fire Effects ◽  
Burn Severity ◽  
Burned Area ◽  
Vegetation Types ◽  
South Eastern ◽  
Eastern Usa ◽  
Landsat Satellite

We assessed an existing method of remote sensing of wildland fire burn severity for its applicability in south-eastern USA vegetation types. This method uses Landsat satellite imagery to calculate the Normalised Burn Ratio (NBR) of reflectance bands sensitive to fire effects, and the change in NBR from pre- to post fire (dNBR) to estimate burn severity. To ground-truth ranges of NBR and dNBR that correspond to levels of burn severity, we measured severity using the Composite Burn Index at 731 locations stratified by plant community type, season of measurement, and time since fire. Best-fit curves relating Composite Burn Index to NBR or dNBR were used to determine reflectance value breakpoints that delimit levels of burn severity. Remotely estimated levels of burn severity within 3 months following fire had an average of 78% agreement with ground measurements using NBR and 75% agreement using dNBR. However, percentage agreement varied among habitat types and season of measurement, with either NBR or dNBR being advantageous under specific combinations of conditions. The results suggest this method will be useful for monitoring burned area and burn severity in south-eastern USA vegetation types if the provided recommendations and limitations are considered.

Challenges of assessing fire and burn severity using field measures, remote sensing and modelling

2014 ◽  
Vol 23 (8) ◽  
pp. 1045 ◽  
Author(s):  
Penelope Morgan ◽  
Robert E. Keane ◽  
Gregory K. Dillon ◽  
Theresa B. Jain ◽  
Andrew T. Hudak ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Simulation Models ◽  
Severity Index ◽  
Fire Effects ◽  
Burn Severity ◽  
Ecological Change ◽  
Continuous Variables ◽  
Field Methods ◽  
Soil Burn Severity ◽  
Effective Assessment

Comprehensive assessment of ecological change after fires have burned forests and rangelands is important if we are to understand, predict and measure fire effects. We highlight the challenges in effective assessment of fire and burn severity in the field and using both remote sensing and simulation models. We draw on diverse recent research for guidance on assessing fire effects on vegetation and soil using field methods, remote sensing and models. We suggest that instead of collapsing many diverse, complex and interacting fire effects into a single severity index, the effects of fire should be directly measured and then integrated into severity index keys specifically designed for objective severity assessment. Using soil burn severity measures as examples, we highlight best practices for selecting imagery, designing an index, determining timing and deciding what to measure, emphasising continuous variables measureable in the field and from remote sensing. We also urge the development of a severity field assessment database and research to further our understanding of causal mechanisms linking fire and burn severity to conditions before and during fires to support improved models linking fire behaviour and severity and for forecasting effects of future fires.

scholarly journals New Orthophoto Generation Strategies from UAV and Ground Remote Sensing Platforms for High-Throughput Phenotyping

2021 ◽  
Vol 13 (5) ◽  
pp. 860
Author(s):  
Yi-Chun Lin ◽  
Tian Zhou ◽  
Taojun Wang ◽  
Melba Crawford ◽  
Ayman Habib
Keyword(s):  
Remote Sensing ◽  
Control Strategies ◽  
Target Function ◽  
Canopy Cover ◽  
Surface Model ◽  
Flowering Date ◽  
Sensing Platforms ◽  
Geolocation Accuracy ◽  
New Strategies

Remote sensing platforms have become an effective data acquisition tool for digital agriculture. Imaging sensors onboard unmanned aerial vehicles (UAVs) and tractors are providing unprecedented high-geometric-resolution data for several crop phenotyping activities (e.g., canopy cover estimation, plant localization, and flowering date identification). Among potential products, orthophotos play an important role in agricultural management. Traditional orthophoto generation strategies suffer from several artifacts (e.g., double mapping, excessive pixilation, and seamline distortions). The above problems are more pronounced when dealing with mid- to late-season imagery, which is often used for establishing flowering date (e.g., tassel and panicle detection for maize and sorghum crops, respectively). In response to these challenges, this paper introduces new strategies for generating orthophotos that are conducive to the straightforward detection of tassels and panicles. The orthophoto generation strategies are valid for both frame and push-broom imaging systems. The target function of these strategies is striking a balance between the improved visual appearance of tassels/panicles and their geolocation accuracy. The new strategies are based on generating a smooth digital surface model (DSM) that maintains the geolocation quality along the plant rows while reducing double mapping and pixilation artifacts. Moreover, seamline control strategies are applied to avoid having seamline distortions at locations where the tassels and panicles are expected. The quality of generated orthophotos is evaluated through visual inspection as well as quantitative assessment of the degree of similarity between the generated orthophotos and original images. Several experimental results from both UAV and ground platforms show that the proposed strategies do improve the visual quality of derived orthophotos while maintaining the geolocation accuracy at tassel/panicle locations.

scholarly journals Field-Scale Soil Moisture Retrieval Using PALSAR-2 Polarimetric Decomposition and Machine Learning

Agronomy ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 35
Author(s):  
Xiaodong Huang ◽  
Beth Ziniti ◽  
Michael H. Cosh ◽  
Michele Reba ◽  
Jinfei Wang ◽  
...  
Keyword(s):  
Machine Learning ◽  
Soil Moisture ◽  
Canopy Cover ◽  
The United States ◽  
Optical Data ◽  
Study Region ◽  
Model Based ◽  
Key Indicator ◽  
Ground Measurement ◽  
L Band

Soil moisture is a key indicator to assess cropland drought and irrigation status as well as forecast production. Compared with the optical data which are obscured by the crop canopy cover, the Synthetic Aperture Radar (SAR) is an efficient tool to detect the surface soil moisture under the vegetation cover due to its strong penetration capability. This paper studies the soil moisture retrieval using the L-band polarimetric Phased Array-type L-band SAR 2 (PALSAR-2) data acquired over the study region in Arkansas in the United States. Both two-component model-based decomposition (SAR data alone) and machine learning (SAR + optical indices) methods are tested and compared in this paper. Validation using independent ground measurement shows that the both methods achieved a Root Mean Square Error (RMSE) of less than 10 (vol.%), while the machine learning methods outperform the model-based decomposition, achieving an RMSE of 7.70 (vol.%) and R2 of 0.60.

scholarly journals Leveraging TLS as a Calibration and Validation Tool for MLS and ULS Mapping of Savanna Structure and Biomass at Landscape-Scales

2021 ◽  
Vol 13 (2) ◽  
pp. 257 ◽  
Author(s):  
Shaun R. Levick ◽  
Tim Whiteside ◽  
David A. Loewensteiner ◽  
Mitchel Rudge ◽  
Renee Bartolo
Keyword(s):  
Remote Sensing ◽  
Vegetation Structure ◽  
Laser Scanning ◽  
Canopy Cover ◽  
Structural Diversity ◽  
Point Clouds ◽  
Large Area ◽  
Calibration And Validation ◽  
Savanna Vegetation ◽  
Landscape Scales

Savanna ecosystems are challenging to map and monitor as their vegetation is highly dynamic in space and time. Understanding the structural diversity and biomass distribution of savanna vegetation requires high-resolution measurements over large areas and at regular time intervals. These requirements cannot currently be met through field-based inventories nor spaceborne satellite remote sensing alone. UAV-based remote sensing offers potential as an intermediate scaling tool, providing acquisition flexibility and cost-effectiveness. Yet despite the increased availability of lightweight LiDAR payloads, the suitability of UAV-based LiDAR for mapping and monitoring savanna 3D vegetation structure is not well established. We mapped a 1 ha savanna plot with terrestrial-, mobile- and UAV-based laser scanning (TLS, MLS, and ULS), in conjunction with a traditional field-based inventory (n = 572 stems > 0.03 m). We treated the TLS dataset as the gold standard against which we evaluated the degree of complementarity and divergence of structural metrics from MLS and ULS. Sensitivity analysis showed that MLS and ULS canopy height models (CHMs) did not differ significantly from TLS-derived models at spatial resolutions greater than 2 m and 4 m respectively. Statistical comparison of the resulting point clouds showed minor over- and under-estimation of woody canopy cover by MLS and ULS, respectively. Individual stem locations and DBH measurements from the field inventory were well replicated by the TLS survey (R2 = 0.89, RMSE = 0.024 m), which estimated above-ground woody biomass to be 7% greater than field-inventory estimates (44.21 Mg ha−1 vs 41.08 Mg ha−1). Stem DBH could not be reliably estimated directly from the MLS or ULS, nor indirectly through allometric scaling with crown attributes (R2 = 0.36, RMSE = 0.075 m). MLS and ULS show strong potential for providing rapid and larger area capture of savanna vegetation structure at resolutions suitable for many ecological investigations; however, our results underscore the necessity of nesting TLS sampling within these surveys to quantify uncertainty. Complementing large area MLS and ULS surveys with TLS sampling will expand our options for the calibration and validation of multiple spaceborne LiDAR, SAR, and optical missions.

scholarly journals Predicting wildfire impacts on the prehistoric archaeological record of the Jemez Mountains, New Mexico, USA

Fire Ecology ◽  
2021 ◽  
Vol 17 (1) ◽  
Author(s):  
Megan M. Friggens ◽  
Rachel A. Loehman ◽  
Connie I. Constan ◽  
Rebekah R. Kneifel
Keyword(s):  
New Mexico ◽  
Fire Severity ◽  
Fire Effects ◽  
Burn Severity ◽  
Fire Season ◽  
Archaeological Sites ◽  
Archaeological Record ◽  
Human Environment ◽  
Jemez Mountains ◽  
Archaeological Materials

Abstract Background Wildfires of uncharacteristic severity, a consequence of climate changes and accumulated fuels, can cause amplified or novel impacts to archaeological resources. The archaeological record includes physical features associated with human activity; these exist within ecological landscapes and provide a unique long-term perspective on human–environment interactions. The potential for fire-caused damage to archaeological materials is of major concern because these resources are irreplaceable and non-renewable, have social or religious significance for living peoples, and are protected by an extensive body of legislation. Although previous studies have modeled ecological burn severity as a function of environmental setting and climate, the fidelity of these variables as predictors of archaeological fire effects has not been evaluated. This study, focused on prehistoric archaeological sites in a fire-prone and archaeologically rich landscape in the Jemez Mountains of New Mexico, USA, identified the environmental and climate variables that best predict observed fire severity and fire effects to archaeological features and artifacts. Results Machine learning models (Random Forest) indicate that topography and variables related to pre-fire weather and fuel condition are important predictors of fire effects and severity at archaeological sites. Fire effects were more likely to be present when fire-season weather was warmer and drier than average and within sites located in sloped, treed settings. Topographic predictors were highly important for distinguishing unburned, moderate, and high site burn severity as classified in post-fire archaeological assessments. High-severity impacts were more likely at archaeological sites with southern orientation or on warmer, steeper, slopes with less accumulated surface moisture, likely associated with lower fuel moistures and high potential for spreading fire. Conclusions Models for predicting where and when fires may negatively affect the archaeological record can be used to prioritize fuel treatments, inform fire management plans, and guide post-fire rehabilitation efforts, thus aiding in cultural resource preservation.

scholarly journals Estimating Forest Canopy Cover by Multiscale Remote Sensing in Northeast Jiangxi, China

Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 433
Author(s):  
Xiaolan Huang ◽  
Weicheng Wu ◽  
Tingting Shen ◽  
Lifeng Xie ◽  
Yaozu Qin ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Large Scale ◽  
Forest Canopy ◽  
Canopy Cover ◽  
Google Earth ◽  
Tree Canopy ◽  
Landsat Data ◽  
High Resolution Data ◽  
Modis Ndvi ◽  
Tree Canopy Cover

This research was focused on estimation of tree canopy cover (CC) by multiscale remote sensing in south China. The key aim is to establish the relationship between CC and woody NDVI (NDVIW) or to build a CC-NDVIW model taking northeast Jiangxi as an example. Based on field CC measurements, this research used Google Earth as a complementary source to measure CC. In total, 63 sample plots of CC were created, among which 45 were applied for modeling and the remaining 18 were employed for verification. In order to ascertain the ratio R of NDVIW to the satellite observed NDVI, a 20-year time-series MODIS NDVI dataset was utilized for decomposition to obtain the NDVIW component, and then the ratio R was calculated with the equation R = (NDVIW/NDVI) *100%, respectively, for forest (CC >60%), medium woodland (CC = 25–60%) and sparse woodland (CC 1–25%). Landsat TM and OLI images that had been orthorectified by the provider USGS were atmospherically corrected using the COST model and used to derive NDVIL. R was multiplied for the NDVIL image to extract the woody NDVI (NDVIWL) from Landsat data for each of these plots. The 45 plots of CC data were linearly fitted to the NDVIWL, and a model with CC = 103.843 NDVIW + 6.157 (R2 = 0.881) was obtained. This equation was applied to predict CC at the 18 verification plots and a good agreement was found (R2 = 0.897). This validated CC-NDVIW model was further applied to the woody NDVI of forest, medium woodland and sparse woodland derived from Landsat data for regional CC estimation. An independent group of 24 measured plots was utilized for validation of the results, and an accuracy of 83.0% was obtained. Thence, the developed model has high predictivity and is suitable for large-scale estimation of CC using high-resolution data.

Sign in / Sign up

Export Citation Format

Share Document