Annual denitrification rates in agricultural and forest soils: a review

Soil Research ◽  
1999 ◽  
Vol 37 (6) ◽  
pp. 1073 ◽  
Author(s):  
L. Barton ◽  
C. D. A. McLay ◽  
L. A. Schipper ◽  
C. T. Smith
Keyword(s):  
Forest Soils ◽  
Large Range ◽  
Agricultural Soils ◽  
Site Management ◽  
Pilot Studies ◽  
The Past ◽  
Sampling Protocols ◽  
Soil Site ◽  
Soil Process

Denitrification is an important soil process for assessing nitrogen cycling and controlling nitrogen pollution in the environment. Numerous studies of denitrification rates in soils have been reported over the last decade, many with sampling protocols that are more reliable than in the past. In this paper, we review denitrification rates for agricultural and forest soils that have been reported in the literature, discuss factors that appear to be important in controlling the amount of denitrification that occurs in these soils, and summarise modelling approaches that have been used to predict annual denitrification rates. Most studies of in situ denitrification in upland soils have been conducted in agricultural grassland and forest ecosystems, with a paucity of studies reported from other ecosystems. A large range of annual, in situ, denitrification rates have been reported (0–239 kg N/ha.year), with the highest rates typically occurring in irrigated, nitrogen-fertilised soils. However, most annual denitrification rates reported in the literature appear to be fairly low, with over half of the rates in forest soils being <1 kg N/ha.year (mean of 1.9 kg N/ha.year). Rates of denitrification in agricultural soils tend to be higher than in forest soils, with 85% of rates reported being >1 kg N/ha.year, and a mean rate of 13 kg N/ha.year. Numerous soil, site, and management factors have been reported to affect the denitrification process in situ. The literature indicates that the highest rates of denitrification can be expected in nitrogen-fertilised soils, or where site management increases soil nitrate availability. Where nitrate is non-limiting, denitrification rates appear to be highest in irrigated loam soils. The review suggests that it is difficult to predict denitrification rates based on our current understanding, and that pilot studies should still be conducted if soil nitrogen balances are required.

Measurement of bacterial and fungal contributions to respiration of selected agricultural and forest soils

1975 ◽  
Vol 21 (3) ◽  
pp. 314-322 ◽  
Author(s):  
J. P. E. Anderson ◽  
K. H. Domsch
Keyword(s):  
Forest Soils ◽  
Agricultural Soils ◽  
Selective Inhibitors ◽  
Average Ratio ◽  
Incubation Periods ◽  
Pure Cultures ◽  
Inhibitor Selectivity ◽  
Fungal Populations ◽  
Litter Sample

A technique using selective inhibitors was used to estimate the relative contributions of bacterial and fungal populations to the respiration of six soils and one litter sample. The ratios of bacterial to fungal respiration in the four agricultural soils, given in percentage of the total microbial activity, ranged from 10/90 to 35/65, with the average ratio being about 30/70. In the forest soils, the ratios were 20/80 and 30/70, and in a beech litter sample, the ratio was 40/60. The fungi clearly dominated in all samples. The ratios were not found to be pH related. The difficulties which had previously limited the use of selective inhibitors for in situ soil ecological investigations, such as insufficient inhibitor specificity, inhibitor inactivation or degradation, and errors of measurement caused by elimination of competitor populations, were either resolved or methodologically avoided in the experiments. Inhibitor selectivity was demonstrated using both mixed and pure cultures of microorganisms from each soil. Through the use of experiments with short incubation periods (6–8 h), problems with population shifts and inhibitor degradation were eliminated.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

In situ microprobe quantitation of inorganic particle burden in paraffin sections of lung tissue

1988 ◽  
Vol 46 ◽  
pp. 990-991
Author(s):  
Jerrold L. Abraham
Keyword(s):  
Lung Tissue ◽  
Quantitative Information ◽  
Particulate Material ◽  
Paraffin Sections ◽  
Tissue Samples ◽  
Qualitative And Quantitative ◽  
The Past ◽  
Quantitative Analyses ◽  
Data Result

Inorganic particulate material of diverse types is present in the ambient and occupational environment, and exposure to such materials is a well recognized cause of some lung disease. To investigate the interaction of inhaled inorganic particulates with the lung it is necessary to obtain quantitative information on the particulate burden of lung tissue in a wide variety of situations. The vast majority of diagnostic and experimental tissue samples (biopsies and autopsies) are fixed with formaldehyde solutions, dehydrated with organic solvents and embedded in paraffin wax. Over the past 16 years, I have attempted to obtain maximal analytical use of such tissue with minimal preparative steps. Unique diagnostic and research data result from both qualitative and quantitative analyses of sections. Most of the data has been related to inhaled inorganic particulates in lungs, but the basic methods are applicable to any tissues. The preparations are primarily designed for SEM use, but they are stable for storage and transport to other laboratories and several other instruments (e.g., for SIMS techniques).

An atomic-resolution microscope study of Al contracts on GaAs

1986 ◽  
Vol 44 ◽  
pp. 726-727
Author(s):  
Z. Liliental-Weber ◽  
C. Nelson ◽  
R. Ludeke ◽  
R. Gronsky ◽  
J. Washburn
Keyword(s):  
High Speed ◽  
Schottky Contacts ◽  
Detailed Knowledge ◽  
The Past ◽  
Semiconductor Interfaces ◽  
Deposited Metal ◽  
Microwave Applications ◽  
Free Interfaces ◽  
Potential Use

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions

scholarly journals 3D-Bioprinting Strategies Based on In Situ Bone-Healing Mechanism for Vascularized Bone Tissue Engineering

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 287
Author(s):  
Ye Lin Park ◽  
Kiwon Park ◽  
Jae Min Cha
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Healing ◽  
Critical Size ◽  
Current Knowledge ◽  
3D Bioprinting ◽  
The Past ◽  
Regeneration Processes

Over the past decades, a number of bone tissue engineering (BTE) approaches have been developed to address substantial challenges in the management of critical size bone defects. Although the majority of BTE strategies developed in the laboratory have been limited due to lack of clinical relevance in translation, primary prerequisites for the construction of vascularized functional bone grafts have gained confidence owing to the accumulated knowledge of the osteogenic, osteoinductive, and osteoconductive properties of mesenchymal stem cells and bone-relevant biomaterials that reflect bone-healing mechanisms. In this review, we summarize the current knowledge of bone-healing mechanisms focusing on the details that should be embodied in the development of vascularized BTE, and discuss promising strategies based on 3D-bioprinting technologies that efficiently coalesce the abovementioned main features in bone-healing systems, which comprehensively interact during the bone regeneration processes.

scholarly journals Understanding ion-induced assembly of cellulose nanofibrilllar gels through shear-free mixing and in situ scanning-SAXS

2021 ◽  
Author(s):  
Tomas Rosén ◽  
Ruifu Wang ◽  
HongRui He ◽  
Chengbo Zhan ◽  
Shirish Chodankar ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Building Block ◽  
Cellulose Nanofibrils ◽  
Advanced Materials ◽  
The Past

During the past decade, cellulose nanofibrils (CNFs) have shown tremendous potential as a building block to fabricate new advanced materials that are both biocompatible and biodegradable. The excellent mechanical properties...

Calibration Methods to Circumvent Unknown Component Spectra for Quantitative in situ Raman Monitoring of Co-Polymerisation Reaction

2021 ◽  
Author(s):  
Wendy Rusli ◽  
Pavan Kumar Naraharisetti ◽  
Wee Chew
Keyword(s):  
Raman Spectroscopy ◽  
Reaction Monitoring ◽  
The Past ◽  
In Situ Raman ◽  
Calibration Methods ◽  
Unknown Component

The use of Raman spectroscopy for reaction monitoring has been successfully applied over the past few decades. One complication in such usage is the applicability for quantitative reaction studies. This...

The Vyredox and Nitredox Methods of in situ Treatment of Groundwater

1988 ◽  
Vol 20 (3) ◽  
pp. 149-163 ◽  
Author(s):  
Carol Braester ◽  
Rudolf Martinell
Keyword(s):  
Water Treatment ◽  
Surface Water ◽  
Traditional Method ◽  
Treatment Method ◽  
Nitrate Treatment ◽  
The Past ◽  
The World ◽  
Nitrate And Nitrite ◽  
Iron And Manganese

Nearly one fifth of all water used in the world is obtained from groundwater. The protection of water has become a high priority goal. During the last decades pollution of water has become more and more severe. Today groundwater is more and more used in comparison with surface water. Recently we have seen accidents, which can pollute nearly all surface water very quickly. Generally the groundwater is easier to protect, as well as cheaper to purify, and above all it is of better quality than the surface water. During the past two decades, alternatives to the traditional method of treating the water in filters have been developed, that is in situ water treatment i.e. the VYREDOX and NITREDOX methods. The most common problem regarding groundwater is too high content of iron and manganese, which can be reduced with the VYREDOX method. In some areas today there are severe problems with pollution by hydrocarbons and nitrate as well, and with modification of the VYREDOX treatment method it is used for hydrocarbon and nitrate treatment as well. The method to reduce the nitrate and nitrite is known as the NITREDOX method.

scholarly journals Retention of the Antibiotic Cefuroxime onto Agricultural and Forest Soils

2021 ◽  
Vol 11 (10) ◽  
pp. 4663
Author(s):  
Raquel Cela-Dablanca ◽  
Carolina Nebot ◽  
Lucia Rodríguez López ◽  
David Ferández-Calviño ◽  
Manuel Arias-Estévez ◽  
...  
Keyword(s):  
Forest Soils ◽  
Linear Models ◽  
Agricultural Soils ◽  
Organic Matter Content ◽  
Matter Content ◽  
Batch Type ◽  
Exchangeable Ca ◽  
Influence Of Ph ◽  
Best Fit ◽  
Soil Colloids

Antibiotics in wastewater, sewage sludge, manures, and slurries constitute a risk for the environment when spread on soils. This work studies the adsorption and desorption of the antibiotic cefuroxime (CFX) in 23 agricultural and forest soils, using batch-type experiments. Our results show that the adsorption values were between 40.75 and 99.57% in the agricultural soils, while the range was lower (from 74.57 to 93.46%) in forest soils. Among the Freundlich, Langmuir, and Linear models, the Freundlich equation shows the best fit for the adsorption results. In addition, agricultural soils with higher pH are the ones that present the highest adsorption. Further confirmation of the influence of pH on adsorption is given by the fact that Freundlich’s KF parameter and the Linear model Kd parameter shows a positive correlation with pH and with the exchangeable Ca and Mg values, which are known to affect the charges of the soil colloids and the formation of cationic bridges between adsorbents and adsorbate. In addition, Freundlich’s n parameter shows a positive and significant correlation with the organic matter content, related to the high adsorption taking place on forest soils despite their pH < 5. Regarding desorption, in most cases, it is lower than 1%, which indicates that CFX is adsorbed in a rather irreversible way onto these soils. Overall, these results can be considered relevant regarding their potential impact on environmental quality and public health.

Did Ground Cover Change Over Geologic Time?

2000 ◽  
Vol 6 ◽  
pp. 171-182 ◽  
Author(s):  
Ben A. LePage ◽  
Hermann W. Pfefferkorn
Keyword(s):  
Fossil Record ◽  
Ground Cover ◽  
The Other ◽  
Detailed Account ◽  
Geologic Time ◽  
The Past ◽  
Other Hand ◽  
Plant Fossil

When one hears the term “ground cover,” one immediately thinks of “grasses.” This perception is so deep-seated that paleobotanists even have been overheard to proclaim that “there was no ground cover before grasses.” Today grasses are so predominant in many environments that this perception is perpetuated easily. On the other hand, it is difficult to imagine the absence or lack of ground cover prior to the mid-Tertiary. We tested the hypothesis that different forms of ground cover existed in the past against examples from the Recent and the fossil record (Table 1). The Recent data were obtained from a large number of sources including those in the ecological, horticultural, and microbiological literature. Other data were derived from our knowledge of Precambrian life, sedimentology and paleosols, and the plant fossil record, especially in situ floras and fossil “monocultures.” Some of the data are original observations, but many others are from the literature. A detailed account of these results will be presented elsewhere (Pfefferkorn and LePage, in preparation).

Sign in / Sign up

Export Citation Format

Share Document