scholarly journals Radio Source Scintillations Through Comet Tails Revisited: Comet Wilson (1987)

1990 ◽  
Vol 43 (6) ◽  
pp. 801 ◽  
Author(s):  
OB Slee ◽  
AD Bobra ◽  
D Waldron ◽  
J Lim

Observations of the quasars 0606-795 and 0637-752 as the tail of Comet Wilson swept across them on May 1 and May 2, 1987, showed a three-fold increase in scintillation index over that of nearby compact radio sources outside the tail. Two scintillation regimes have been identified: (1) small-scale turbulence of 10-40 km develops near the tail-axis; (2) large-scale turbulence of 90-350 km is present in the off-axis transition region between the tail plasma and solar wind. At a distance 0�12 AU downstream from the nucleus the r.m.s. electron-density variation in these turbules is 4-8 cm-3 on axis and 0�8-1� 7 cm-3 in the transition region between the tail and the solar wind. The reported negative results from earlier comets are shown to be of doubtful significance.

1991 ◽  
Vol 44 (5) ◽  
pp. 565 ◽  
Author(s):  
P Janardhan ◽  
SK Alurkar ◽  
AD Bobra ◽  
OB Slee

Enhanced scintillations in the direction of the quasar 2204+29 (3C441) were observed on 13 May 1990 when the tail of Comet Austin passed in front of it. Comparison with previous observations at 103, 327 and 408 MHz of Comet Halley and at 408 MHz of Comet Wilson show that proper occultation geometry is essential for observing enhanced scintillations. It has been shown that the solar elongation ? during such observations should be large, typically greater than 60� and in no case less than 30� at 103 MHz. At the time of the occultation the scintillation index (r.m.s./mean source flux) was greater than that expected for this source by a factor of 3. The r.m.s. electron density variation /IN, at a distance of 0�9 A.U. from the sun and 7�3� downstream of the nucleus, was found to be 6 cm-3 as compared with 1 cm-3 for the normal solar wind at 1 A.U. The corresponding scale sizes of the turbulence were found to be much finer than normally found in interplanetary scintillation (IPS) caused by the solar wind.


2019 ◽  
Vol 4 (12) ◽  
Author(s):  
C. Marchioli ◽  
H. Bhatia ◽  
G. Sardina ◽  
L. Brandt ◽  
A. Soldati

Author(s):  
Scott Martin ◽  
Aleksandar Jemcov ◽  
Björn de Ruijter

Here the premixed Conditional Moment Closure (CMC) method is used to model the recent PIV and Raman turbulent, enclosed reacting methane jet data from DLR Stuttgart [1]. The experimental data has a rectangular test section at atmospheric pressure and temperature with a single inlet jet. A jet velocity of 90 m/s is used with an adiabatic flame temperature of 2,064 K. Contours of major species, temperature and velocities along with velocity rms values are provided. The conditional moment closure model has been shown to provide the capability to model turbulent, premixed methane flames with detailed chemistry and reasonable runtimes [2]. The simplified CMC model used here falls into the class of table lookup turbulent combustion models where the chemical kinetics are solved offline over a range of conditions and stored in a table that is accessed by the CFD code. Most table lookup models are based on the laminar 1-D flamelet equations, which assume the small scale turbulence does not affect the reaction rates, only the large scale turbulence has an effect on the reaction rates. The CMC model is derived from first principles to account for the effects of small scale turbulence on the reaction rates, as well as the effects of the large scale mixing, making it more versatile than other models. This is accomplished by conditioning the scalars with the reaction progress variable. By conditioning the scalars and accounting for the small scale mixing, the effects of turbulent fluctuations of the temperature on the reaction rates are more accurately modeled. The scalar dissipation is used to account for the effects of the small scale mixing on the reaction rates. The original premixed CMC model used a constant value of scalar dissipation, here the scalar dissipation is conditioned by the reaction progress variable. The steady RANS 3-D version of the open source CFD code OpenFOAM is used. Velocity, temperature and species are compared to the experimental data. Once validated, this CFD turbulent combustion model will have great utility for designing lean premixed gas turbine combustors.


2014 ◽  
Vol 955-959 ◽  
pp. 2425-2429 ◽  
Author(s):  
Yun Fei Li ◽  
Jian Guo Yang ◽  
Yan Yan Wang ◽  
Xiao Guo Wang

The purpose of this study is to construct a turbulent aggregation device which has specific performance for fine particle aggregation in flue gas. The device consists of two cylindrical pipes and an array of vanes. The pipes extending fully and normal to the gas stream induce large scale turbulence in the form of vortices, while the vanes downstream a certain distance from the pipes induce small one. The process of turbulent aggregation was numerically simulated by coupling the Eulerian multiphase model and population balance model together with a proposed aggregation kernel function taking the size and inertia of particles into account, and based on data of particles’ size distribution measured from the flue of one power plant. The results show that the large scale turbulence generated by pipes favours the aggregation of smaller particles (smaller than 1μm) notably, while the small scale turbulence benefits the aggregation of bigger particles (larger than 1μm) notably and enhances the uniformity of particle size distribution among different particle groups.


2002 ◽  
Vol 14 (7) ◽  
pp. 2475 ◽  
Author(s):  
L. Danaila ◽  
F. Anselmet ◽  
R. A. Antonia

2004 ◽  
Vol 22 (1) ◽  
pp. 183-212 ◽  
Author(s):  
S. Savin ◽  
L. Zelenyi ◽  
S. Romanov ◽  
I. Sandahl ◽  
J. Pickett ◽  
...  

Abstract. We advance the achievements of Interball-1 and other contemporary missions in exploration of the magnetosheath-cusp interface. Extensive discussion of published results is accompanied by presentation of new data from a case study and a comparison of those data within the broader context of three-year magnetopause (MP) crossings by Interball-1. Multi-spacecraft boundary layer studies reveal that in ∼80% of the cases the interaction of the magnetosheath (MSH) flow with the high latitude MP produces a layer containing strong nonlinear turbulence, called the turbulent boundary layer (TBL). The TBL contains wave trains with flows at approximately the Alfvén speed along field lines and "diamagnetic bubbles" with small magnetic fields inside. A comparison of the multi-point measurements obtained on 29 May 1996 with a global MHD model indicates that three types of populating processes should be operative: large-scale (∼few RE) anti-parallel merging at sites remote from the cusp; medium-scale (few thousandkm) local TBL-merging of fields that are anti-parallel on average; small-scale (few hundredkm) bursty reconnection of fluctuating magnetic fields, representing a continuous mechanism for MSH plasma inflow into the magnetosphere, which could dominate in quasi-steady cases. The lowest frequency (∼1–2mHz) TBL fluctuations are traced throughout the magnetosheath from the post-bow shock region up to the inner magnetopause border. The resonance of these fluctuations with dayside flux tubes might provide an effective correlative link for the entire dayside region of the solar wind interaction with the magnetopause and cusp ionosphere. The TBL disturbances are characterized by kinked, double-sloped wave power spectra and, most probably, three-wave cascading. Both elliptical polarization and nearly Alfvénic phase velocities with characteristic dispersion indicate the kinetic Alfvénic nature of the TBL waves. The three-wave phase coupling could effectively support the self-organization of the TBL plasma by means of coherent resonant-like structures. The estimated characteristic scale of the "resonator" is of the order of the TBL dimension over the cusps. Inverse cascades of kinetic Alfvén waves are proposed for forming the larger scale "organizing" structures, which in turn synchronize all nonlinear cascades within the TBL in a self-consistent manner. This infers a qualitative difference from the traditional approach, wherein the MSH/cusp interaction is regarded as a linear superposition of magnetospheric responses on the solar wind or MSH disturbances. Key words. Magnetospheric physics (magnetopause, cusp, and boundary layers) – Space plasma physics (turbulence; nonlinear phenomena)


2021 ◽  
Author(s):  
Merav Opher ◽  
James Drake ◽  
Gary Zank ◽  
Gabor Toth ◽  
Erick Powell ◽  
...  

Abstract The heliosphere is the bubble formed by the solar wind as it interacts with the interstellar medium (ISM). Studies show that the solar magnetic field funnels the heliosheath solar wind (the shocked solar wind at the edge of the heliosphere) into two jet-like structures1-2. Magnetohydrodynamic simulations show that these heliospheric jets become unstable as they move down the heliotail1,3 and drive large-scale turbulence. However, the mechanism that produces of this turbulence had not been identified. Here we show that the driver of the turbulence is the Rayleigh-Taylor (RT) instability caused by the interaction of neutral H atoms streaming from the ISM with the ionized matter in the heliosheath (HS). The drag between the neutral and ionized matter acts as an effective gravity which causes a RT instability to develop along the axis of the HS magnetic field. A density gradient exists perpendicular to this axis due to the confinement of the solar wind by the solar magnetic field. The characteristic time scale of the instability depends on the neutral H density in the ISM and for typical values the growth rate is ~ 3 years. The instability destroys the coherence of the heliospheric jets and magnetic reconnection ensues, allowing ISM material to penetrate the heliospheric tail. Signatures of this instability should be observable in Energetic Neutral Atom (ENA) maps from future missions such as IMAP4. The turbulence driven by the instability is macroscopic and potentially has important implications for particle acceleration.


2007 ◽  
Vol 25 (5) ◽  
pp. 1183-1197 ◽  
Author(s):  
M. L. Parkinson ◽  
R. C. Healey ◽  
P. L. Dyson

Abstract. Multi-scale structure of the solar wind in the ecliptic at 1 AU undergoes significant evolution with the phase of the solar cycle. Wind spacecraft measurements during 1995 to 1998 and ACE spacecraft measurements during 1997 to 2005 were used to characterise the evolution of small-scale (~1 min to 2 h) fluctuations in the solar wind speed vsw, magnetic energy density B2, and solar wind ε parameter, in the context of large-scale (~1 day to years) variations. The large-scale variation in ε most resembled large-scale variations in B2. The probability density of large fluctuations in ε and B2 both had strong minima during 1995, a familiar signature of solar minimum. Generalized Structure Function (GSF) analysis was used to estimate inertial range scaling exponents aGSF and their evolution throughout 1995 to 2005. For the entire data set, the weighted average scaling exponent for small-scale fluctuations in vsw was aGSF=0.284±0.001, a value characteristic of intermittent MHD turbulence (>1/4), whereas the scaling exponents for corresponding fluctuations in B2 and ε were aGSF=0.395±0.001 and 0.334±0.001, respectively. These values are between the range expected for Gaussian fluctuations (1/2) and Kolmogorov turbulence (1/3). However, the scaling exponent for ε changed from a Gaussian-Kolmogorov value of 0.373±0.005 during 1997 (end of solar minimum) to an MHD turbulence value of 0.247±0.004 during 2003 (recurrent fast streams). Changes in the characteristics of solar wind turbulence may be reproducible from one solar cycle to the next.


1990 ◽  
Vol 142 ◽  
pp. 60-61
Author(s):  
Sydney D'Silva ◽  
Arnab Rai Choudhuri

Working under the hypothesis that magnetic flux in the sun is generated at the bottom of the convection zone, Choudhuri and Gilman (1987; Astrophys. J. 316, 788) found that a magnetic flux tube symmetric around the rotation axis, when released at the bottom of the convection zone, gets deflected by the Coriolis force and tends to move parallel to the rotation axis as it rises in the convection zone. As a result, all the flux emerges at rather high latitudes and the flux observed at the typical sunspot latitudes remains unexplained. Choudhuri(1989; Solar Physics, in press) finds that non-axisymmetric perturbations too cannot subdue the Coriolis force. In this paper, we no longer treat the convection zone to be passive as in the previous papers, but we consider the role of turbulence in the convection zone in inhibiting the Coriolis force. The interaction of the flux tubes with the turbulence is treated in a phenomenological way as follows: (1) Large scale turbulence on the scale of giant cells can physically drag the tubes outwards, thus pulling the flux towards lower latitudes by dominating over the Coriolis force. (2) Small scale turbulence of the size of the tubes can exchange angular momentum with the tube, thus suppressing the growth of the Coriolis force and making the tubes emerge at lower latitudes. Numerical simulations show that the giant cells can drag the tubes and make them emerge at lower latitudes only if the velocities within the giant cells are unrealistically large or if the radii of the flux tubes are as small as 10 km. However, small scale turbulence can successfully suppress the growth of the Coriolis force if the tubes have radii smaller than about 300 km which may not be unreasonable. Such flux tubes can then emerge at low latitudes where sunspots are seen.


2019 ◽  
Vol 867 ◽  
pp. 146-194 ◽  
Author(s):  
G. L. Richard ◽  
A. Duran ◽  
B. Fabrèges

We derive a two-dimensional depth-averaged model for coastal waves with both dispersive and dissipative effects. A tensor quantity called enstrophy models the subdepth large-scale turbulence, including its anisotropic character, and is a source of vorticity of the average flow. The small-scale turbulence is modelled through a turbulent-viscosity hypothesis. This fully nonlinear model has equivalent dispersive properties to the Green–Naghdi equations and is treated, both for the optimization of these properties and for the numerical resolution, with the same techniques which are used for the Green–Naghdi system. The model equations are solved with a discontinuous Galerkin discretization based on a decoupling between the hyperbolic and non-hydrostatic parts of the system. The predictions of the model are compared to experimental data in a wide range of physical conditions. Simulations were run in one-dimensional and two-dimensional cases, including run-up and run-down on beaches, non-trivial topographies, wave trains over a bar or propagation around an island or a reef. A very good agreement is reached in every cases, validating the predictive empirical laws for the parameters of the model. These comparisons confirm the efficiency of the present strategy, highlighting the enstrophy as a robust and reliable tool to describe wave breaking even in a two-dimensional context. Compared with existing depth-averaged models, this approach is numerically robust and adds more physical effects without significant increase in numerical complexity.


Sign in / Sign up

Export Citation Format

Share Document