Desorption during resuspension events: Kinetic v. equilibrium model

1995 ◽  
Vol 46 (1) ◽  
pp. 251 ◽  
Author(s):  
CY Cheng ◽  
JF Atkinson ◽  
JV DePinto
Keyword(s):  
Bulk Water ◽  
Water Phase ◽  
Particulate Phase ◽  
Intraparticle Diffusion Model ◽  
Natural Systems ◽  
Wide Range ◽  
Time Required ◽  
Parameter Values ◽  
Dissolved Phase ◽  
Mixed Systems

The spills and release of hydrophobic organic chemicals (HOCs) into waterbodies have resulted in the contamination of bottom sediments. When these sediments are resuspended by runoff events or by dredging, particulate-phase contaminants desorb to the water phase. Equilibrium between the particulate phase and the dissolved phase is usually assumed for most modelling applications regardless of time scale. For well mixed systems in which chemical transport is not limited by mass transfer between the bulk water phase and sediment aggregates, an intraparticle diffusion model can be applied to estimate the time required for various HOCs to reach an equilibrium state between dissolved and particulate-phase concentrations. Calculations from this model show that total equilibrium time scales cover a wide range, from less than a day to a few hundred days. This study compares predicted suspension times for sediments of various sizes with expected equilibration times for desorption. This comparison indicates that the equilibrium assumption is not valid for a wide range of parameter values typical of natural systems. In particular, compounds with high partition coefficients, greater than about 104 mL g-1, will have minimum equilibration times of at least one to ten days. This is likely to be greater than the expected resuspension time.

scholarly journals Concentration and accumulation of some trace elements in water, sediment and two species of aquatic plants collected from the Main outfall drain, near the center of Al-Nassiriyia city/ Iraq

2014 ◽  
Vol 8 (2) ◽  
pp. 19-27
Author(s):  
Basim Y. Al-khafaji ◽  
Afrah A. Maktoof Al-Awady
Keyword(s):  
Trace Elements ◽  
Aquatic Plants ◽  
Summer Season ◽  
Environmental Parameter ◽  
Sediment Texture ◽  
Particulate Phase ◽  
Acceptable Range ◽  
Wide Range ◽  
Trace Elements In Water ◽  
Dissolved Phase

Concentration and accumulation of seven trace elements (Cd, Cu, Pb, Ni, Fe, Mn and Zn) were measured in water (dissolved and particulate) phase, sediment and two species of aquatic plants phragmits australis and Ceratophylum demerssum collected during summer season, 2012 from the main outfall drain, some environmental parameter (Temperature, dissolved oxygen, salinity, pH) of water were measured, also total organic carbon TOC%, sediment texture were measured and expressed as percentage. Higher concentration of elements under study were observed in sediment more than their concentrations in water and plants, while particulate phase of water concentrated trace elements more than their concentration in dissolved phase, whereas the accumulation of trace elements in plants, showed that their concentration in phragmits australis was more than their concentration in Ceratophyllum demerssum. The study observed that it can use the two species of plants as bioindicator for accumulation of trace elements also the concentration of TE in the study samples were in acceptable range, when it compared with world wide range. The study showed that the possibility of using both plants to remove this type of pollutant from the aquatic environment and can be used in bioremediation for processes.

Microwaves: Application in Electron Microscopy

1990 ◽  
Vol 48 (3) ◽  
pp. 140-141
Author(s):  
Anthony S-Y Leong ◽  
David W Gove
Keyword(s):  
Electron Microscopy ◽  
Light Microscopy ◽  
Chemical Reactions ◽  
Electromagnetic Waves ◽  
Tissue Fixation ◽  
Primary Method ◽  
Dipolar Molecules ◽  
Wide Range ◽  
Time Required ◽  
Cryostat Sections

Microwaves (MW) are electromagnetic waves which are commonly generated at a frequency of 2.45 GHz. When dipolar molecules such as water, the polar side chains of proteins and other molecules with an uneven distribution of electrical charge are exposed to such non-ionizing radiation, they oscillate through 180° at a rate of 2,450 million cycles/s. This rapid kinetic movement results in accelerated chemical reactions and produces instantaneous heat. MWs have recently been applied to a wide range of procedures for light microscopy. MWs generated by domestic ovens have been used as a primary method of tissue fixation, it has been applied to the various stages of tissue processing as well as to a wide variety of staining procedures. This use of MWs has not only resulted in drastic reductions in the time required for tissue fixation, processing and staining, but have also produced better cytologic images in cryostat sections, and more importantly, have resulted in better preservation of cellular antigens.

TIME TO THE END OF PRIMARY CONSOLIDATION (EOP) OF SOFT CLAYEY SOILS: CONCERNING THE EFFECT OF ATTERBERG’S LIMIT AND CYCLIC LOADING HISTORY

2019 ◽  
Vol 128 (2B) ◽  
pp. 29-41
Author(s):  
Trần Thanh Nhàn
Keyword(s):  
Cyclic Loading ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Clayey Soils ◽  
Loading History ◽  
Cyclic Shear ◽  
Wide Range ◽  
Primary Consolidation ◽  
Time Required

In order to observe the end of primary consolidation (EOP) of cohesive soils with and without subjecting to cyclic loading, reconstituted specimens of clayey soils at various Atterberg’s limits were used for oedometer test at different loading increments and undrained cyclic shear test followed by drainage with various cyclic shear directions and a wide range of shear strain amplitudes. The pore water pressure and settlement of the soils were measured with time and the time to EOP was then determined by different methods. It is shown from observed results that the time to EOP determined by 3-t method agrees well with the time required for full dissipation of the pore water pressure and being considerably larger than those determined by Log Time method. These observations were then further evaluated in connection with effects of the Atterberg’s limit and the cyclic loading history.

scholarly journals β-Lactoglobulin Adsorption Layers at the Water/Air Surface: 5. Adsorption Isotherm and Equation of State Revisited, Impact of pH

2021 ◽  
Vol 5 (1) ◽  
pp. 14
Author(s):  
Georgi G. Gochev ◽  
Volodymyr I. Kovalchuk ◽  
Eugene V. Aksenenko ◽  
Valentin B. Fainerman ◽  
Reinhard Miller
Keyword(s):  
Theoretical Description ◽  
Fluid Interfaces ◽  
Interfacial Behavior ◽  
Current State ◽  
Air Interface ◽  
Direct Measurements ◽  
Wide Range ◽  
Dilational Viscoelasticity ◽  
Parameter Values ◽  
Β Lactoglobulin

The theoretical description of the adsorption of proteins at liquid/fluid interfaces suffers from the inapplicability of classical formalisms, which soundly calls for the development of more complicated adsorption models. A Frumkin-type thermodynamic 2-d solution model that accounts for nonidealities of interface enthalpy and entropy was proposed about two decades ago and has been continuously developed in the course of comparisons with experimental data. In a previous paper we investigated the adsorption of the globular protein β-lactoglobulin at the water/air interface and used such a model to analyze the experimental isotherms of the surface pressure, Π(c), and the frequency-, f-, dependent surface dilational viscoelasticity modulus, E(c)f, in a wide range of protein concentrations, c, and at pH 7. However, the best fit between theory and experiment proposed in that paper appeared incompatible with new data on the surface excess, Γ, obtained from direct measurements with neutron reflectometry. Therefore, in this work, the same model is simultaneously applied to a larger set of experimental dependences, e.g., Π(c), Γ(c), E(Π)f, etc., with E-values measured strictly in the linear viscoelasticity regime. Despite this ambitious complication, a best global fit was elaborated using a single set of parameter values, which well describes all experimental dependencies, thus corroborating the validity of the chosen thermodynamic model. Furthermore, we applied the model in the same manner to experimental results obtained at pH 3 and pH 5 in order to explain the well-pronounced effect of pH on the interfacial behavior of β-lactoglobulin. The results revealed that the propensity of β-lactoglobulin globules to unfold upon adsorption and stretch at the interface decreases in the order pH 3 > pH 7 > pH 5, i.e., with decreasing protein net charge. Finally, we discuss advantages and limitations in the current state of the model.

scholarly journals A New Statistic for Detecting Genetic Differentiation

Genetics ◽  
2000 ◽  
Vol 155 (4) ◽  
pp. 2011-2014 ◽  
Author(s):  
Richard R Hudson
Keyword(s):  
Genetic Differentiation ◽  
Dna Sequences ◽  
Genetic Data ◽  
Island Model ◽  
Wide Range ◽  
Infinite Sites Model ◽  
Parameter Values

Abstract A new statistic for detecting genetic differentiation of subpopulations is described. The statistic can be calculated when genetic data are collected on individuals sampled from two or more localities. It is assumed that haplotypic data are obtained, either in the form of DNA sequences or data on many tightly linked markers. Using a symmetric island model, and assuming an infinite-sites model of mutation, it is found that the new statistic is as powerful or more powerful than previously proposed statistics for a wide range of parameter values.

Analysis and Reduction of the Waste in the Work Process Using Time Study Analysis: A Case Study

2014 ◽  
Vol 660 ◽  
pp. 971-975 ◽  
Author(s):  
Mohd Norzaim bin Che Ani ◽  
Siti Aisyah Binti Abdul Hamid
Keyword(s):  
Cycle Time ◽  
Lean Manufacturing ◽  
Value Added ◽  
Time Study ◽  
Study Approach ◽  
Root Cause ◽  
Wide Range ◽  
Unit Of Work ◽  
Time Required ◽  
The Impact

Time study is the process of observation which concerned with the determination of the amount of time required to perform a unit of work involves of internal, external and machine time elements. Originally, time study was first starting to be used in Europe since 1760s in manufacturing fields. It is the flexible technique in lean manufacturing and suitable for a wide range of situations. Time study approach that enable of reducing or minimizing ‘non-value added activities’ in the process cycle time which contribute to bottleneck time. The impact on improving process cycle time for organization that it was increasing the productivity and reduce cost. This project paper focusing on time study at selected processes with bottleneck time and identify the possible root cause which was contribute to high time required to perform a unit of work.

scholarly journals Enhancing the resilience of coupled human and natural systems of alpine rangelands on the Qinghai-Tibetan Plateau

2015 ◽  
Vol 37 (1) ◽  
pp. i ◽  
Author(s):  
Shikui Dong ◽  
Ruth Sherman
Keyword(s):  
Tibetan Plateau ◽  
Science Policy ◽  
Sustainable Management ◽  
Environmental Changes ◽  
Policy Design ◽  
Rangeland Management ◽  
Special Issue ◽  
Natural Systems ◽  
Wide Range ◽  
Science Policy Interface

This special issue covers a wide range of topics on the protection and sustainable management of alpine rangelands on the Qinghai-Tibetan Plateau (QTP), including Indigenous knowledge of sustainable rangeland management, science-policy interface for alpine rangeland biodiversity conservation, adaptations of local people to social and environmental changes and policy design for managing coupled human-natural systems of alpine rangelands.

Nitrification in bulk water and biofilms of algae wastewater stabilization ponds

2007 ◽  
Vol 55 (11) ◽  
pp. 93-101 ◽  
Author(s):  
M.A. Babu ◽  
M.M. Mushi ◽  
N.P. van der Steen ◽  
C.M. Hooijmans ◽  
H.J. Gijzen
Keyword(s):  
Model Equation ◽  
Bulk Water ◽  
Balance Model ◽  
Nitrification Rate ◽  
Relative Contribution ◽  
Activity Test ◽  
Stabilization Ponds ◽  
Wide Range ◽  
Water Columns ◽  
Wastewater Stabilization Ponds

Nitrogen removal in wastewater stabilization ponds is poorly understood and effluent monitoring data show a wide range of differences in ammonium. For effluent discharge into the environment, low levels of nitrogen are recommended. Nitrification is limiting in facultative wastewater stabilization ponds. The reason why nitrification is considered to be limiting is attributed to low growth rate and wash out of the nitrifiers. Therefore to maintain a population, attached growth is required. The aim of this research is to study the relative contribution of bulk water and biofilms with respect to nitrification. The hypothesis is that nitrification can be enhanced in stabilization ponds by increasing the surface area for nitrifier attachment. In order to achieve this, transparent pond reactors representing water columns in algae WSP have been used. To discriminate between bulk and biofilm activity, 5-day batch activity tests were carried out with bulk water and biofilm sampled. The observed value for Rnitrbulk was 2.7 × 10−1 mg-N L−1 d−1 and for Rbiofilm was 1,495 mg-N m−2 d −1. During the 5 days of experiment with the biofilm, ammonia reduction was rapid on the first day. Therefore, a short-term biofilm activity test was performed to confirm this rapid decrease. Results revealed a nitrification rate, Rbiofilm, of 2,125 mg-N m−2 d−1 for the first 5 hours of the test, which is higher than the 1,495 mg-N m−2 d−1, observed on the first day of the 7-day biofilm activity test. Rbiofilm and Rnitrbulk values obtained in the batch activity tests were used as parameters in a mass balance model equation. The model was calibrated by adjusting the fraction of the pond volume and biofilm area that is active (i.e. aerobic). When assuming a depth of 0.08 m active upper layer, the model could describe well the measured effluent values for the pond reactors. The calibrated model was validated by predicting effluent Kjeldahl nitrogen of algae ponds in Palestine and Colombia. The model equation predicted well the effluent concentrations of ponds in Palestine.

Motion of slender bodies in unsteady Stokes flow

2011 ◽  
Vol 688 ◽  
pp. 66-87 ◽  
Author(s):  
Efrath Barta
Keyword(s):  
Stokes Flow ◽  
Slenderness Ratio ◽  
Creeping Flow ◽  
Slender Body Theory ◽  
Wide Range ◽  
Unsteady Stokes Flow ◽  
Slender Bodies ◽  
Set Up ◽  
Micro Organisms ◽  
Parameter Values

AbstractThe flow regime in the vicinity of oscillatory slender bodies, either an isolated one or a row of many bodies, immersed in viscous fluid (i.e. under creeping flow conditions) is studied. Applying the slender-body theory by distributing proper singularities on the bodies’ major axes yields reasonably accurate and easily computed solutions. The effect of the oscillations is revealed by comparisons with known Stokes flow solutions and is found to be most significant for motion along the normal direction. Streamline patterns associated with motion of a single body are characterized by formation and evolution of eddies. The motion of adjacent bodies results, with a reduction or an increase of the drag force exerted by each body depending on the direction of motion and the specific geometrical set-up. This dependence is demonstrated by parametric results for frequency of oscillations, number of bodies, their slenderness ratio and the spacing between them. Our method, being valid for a wide range of parameter values and for densely packed arrays of rods, enables simulation of realistic flapping of bristled wings of some tiny insects and of locomotion of flagella and ciliated micro-organisms, and might serve as an efficient tool in the design of minuscule vehicles. Its potency is demonstrated by a solution for the flapping of thrips.

scholarly journals Infection Prevention Time Required for Construction and Design at a Large Tertiary-Care Hospital, 2019

2020 ◽  
Vol 41 (S1) ◽  
pp. s69-s70
Author(s):  
Angie Dains ◽  
Michael Edmond ◽  
Daniel Diekema ◽  
Stephanie Holley ◽  
Oluchi Abosi ◽  
...  
Keyword(s):  
Infection Control ◽  
Patient Care ◽  
Construction Projects ◽  
Small Scale ◽  
Care Hospital ◽  
Class Iii ◽  
Construction Sites ◽  
Wide Range ◽  
Time Required ◽  
Class Iv

Background: Including infection preventionists (IPs) in hospital design, construction, and renovation projects is important. According to the Joint Commission, “Infection control oversights during building design or renovations commonly result in regulatory problems, millions lost and even patient deaths.” We evaluated the number of active major construction projects at our 800-bed hospital with 6.0 IP FTEs and the IP time required for oversight. Methods: We reviewed construction records from October 2018 through October 2019. We classified projects as active if any construction occurred during the study period. We describe the types of projects: inpatient, outpatient, non–patient care, and the potential impact to patient health through infection control risk assessments (ICRA). ICRAs were classified as class I (non–patient-care area and minimal construction activity), class II (patients are not likely to be in the area and work is small scale), class III (patient care area and work requires demolition that generates dust), and class IV (any area requiring environmental precautions). We calculated the time spent visiting construction sites and in design meetings. Results: During October 2018–October 2019, there were 51 active construction projects with an average of 15 active sites per week. These sites included a wide range of projects from a new bone marrow transplant unit, labor and delivery expansion and renovation, space conversion to an inpatient unit to a project for multiple air handler replacements. All 51 projects were classified as class III or class IV. We visited, on average, 4 construction sites each week for 30 minutes per site, leaving 11 sites unobserved due to time constraints. We spent an average of 120 minutes weekly, but 450 minutes would have been required to observe all 15 sites. Yearly, the required hours to observe these active construction sites once weekly would be 390 hours. In addition to the observational hours, 124 hours were spent in design meetings alone, not considering the preparation time and follow-up required for these meetings. Conclusions: In a large academic medical center, IPs had time available to visit only a quarter of active projects on an ongoing basis. Increasing dedicated IP time in construction projects is essential to mitigating infection control risks in large hospitals.Funding: NoneDisclosures: None

Sign in / Sign up

Export Citation Format

Share Document