Climatology of internal tides at a shelf-break location on the Australian North West Shelf

1988 ◽  
Vol 39 (1) ◽  
pp. 1 ◽  
Author(s):  
PE Hollaway

The concept of defining an internal tide climate is used as a means of providing an assessment of the amplitude of semi-diurnal vertical displacements of density interfaces and of horizontal baroclinic currents at a particular location. The analysis uses current meter and thermistor chain observations from North Rankin, a location just seaward of the shelf break on the Australian North West Shelf, spanning a period of 28 months. Contributions from both principal lunar (M2) and principal solar (S2) period internal waves are considered. The final climatological averages (monthly values) show the baroclinic currents to be comparable to or stronger than the semi-diurnal barotropic currents at the same location for the majority of the year (October through to May). The temporal variability closely follows the variability in the stratification with very weak baroclinic motion during the winter months (June to September).

2021 ◽  
Author(s):  
Eugene Morozov ◽  
Dmitry Frey ◽  
Elizaveta Khimchenko

<p>Observations of tidal internal waves in the Bransfield Strait, Antarctica, are analyzed. The measurements were carried out for 14 days on a moored station equipped with five autonomous temperature and pressure sensors. The mooring was deployed on the slope of Nelson Island (South Shetland Islands archipelago) over a depth of 70 m at point 62°21ꞌ S, 58°49ꞌ W. Analysis is based on the fluctuations of isotherms.  Vertical displacements of temperature revealed that strong internal vertical oscillations up to 30–40 m are caused by the diurnal internal tide. Spectral analysis of vertical displacements of the 0.9°C isotherm showed a clear peak at a period of 24 h. It is known that the tides in the Bransfield Strait are mostly mixed diurnal and semidiurnal, but during the Antarctic summer, diurnal tide component may intensify. The velocity ellipses of the barotropic tidal currents were estimated using the global tidal model TPXO9.0. It was found that tidal ellipses rotate clockwise with a period of 24 h and anticlockwise with a period of 12 h. The waves are forced due to the interaction of the barotropic tide with the bottom topography. Diurnal internal tides do not develop at latitudes higher than 30º over flat bottom. The research was supported by RFBR grant 20-08-00246.</p>


2021 ◽  
Author(s):  
Jonas Löb ◽  
Monika Rhein

<p>Low mode internal waves in the stratified ocean are generated by the interaction between barotropic tides and seafloor topography and by the wind field in the near-inertial range. They are crucial for interior mixing and for the oceanic energy pathways, since they carry a large portion of the energy of the entire internal wave field. Long-term observations of energy fluxes of internal waves are sparse. The aim of this work is to study the temporal variability of wind generated low mode near-inertial internal waves inside an internal tide beam emanating from seamounts south of the Azores. For this, 20 months of consecutive mooring observations are used to calculate the mode 1 and mode 2 near-inertial energy fluxes as well as kinetic and potential energies. The gathered time series of near-inertial internal wave energy flux is not steady due to its intermittent forcing and is neither dominated by either mode 1 or mode 2. It shows a peak induced by a distinct strong wind event which is directly linked to wind-power input into the mixed layer north-east of the mooring location, and allows a comparison between the wind event and a background state. Furthermore, indications of non-linear interactions of the near-inertial waves with the internal tides in the form of resonant triad interaction and non-linear self-interaction have been found. This study provides new insights on the relative importance of single wind events and reinforces the assumption of a global non-uniform distribution of near-inertial energy with emphasis in regions where these events occur often and regularly. It furthermore displays its importance to be adequately incorporated into ocean general circulation models and in generating ocean mixing estimates by near-inertial waves as a similarly important component next to the internal tides.</p>


2007 ◽  
Vol 37 (6) ◽  
pp. 1512-1526 ◽  
Author(s):  
Adriene F. Pereira ◽  
Belmiro M. Castro

Abstract Data collected from moored instruments, deployed over the southeastern Brazilian continental shelf during the summer and winter months of 2001, show internal tide activity near the shelf break. To help to elucidate the observations, a fully three-dimensional nonlinear primitive equation model is applied to simulate the regional barotropic and baroclinic tides. Two semidiurnal (M2 and S2) and two diurnal (K1 and O1) tidal frequencies are considered. Tidal surface elevations are relatively small over the whole modeled area, reaching maximum values of about 0.40 m for M2 and 0.11 m for O1. Comparison between observed and computed tide elevation and Greenwich phase shows reasonable agreement. When the baroclinic response of the model is investigated, stratification is prescribed using summer and winter climatology data of potential density. In this case, the model response to summer and winter stratifications is very similar and internal tides are generated over the shelf break and slope, with vertical displacements up to 25 m, and seaward propagation. Modeled semidiurnal tidal ellipses agree well with winter and summer observations. Observed diurnal tidal ellipses in the middle of the continental shelf and close to the shelf break during summer show an intensification through the water column that could not be represented by the model. Estimates of the total baroclinic M2 offshore energy flux are about 3.5 and 0.5 MW considering winter and summer stratifications, respectively. Although these quantities are three orders of magnitude less than that estimated for regions known for intense internal tides, they refer to offshore fluxes computed for a very small section of the southeastern Brazilian shelf. This is the first published investigation into internal tides in the southwestern Atlantic Ocean off Brazil.


2008 ◽  
Vol 38 (6) ◽  
pp. 1238-1252 ◽  
Author(s):  
Jerome Aucan ◽  
Mark Merrifield

Abstract Moorings deployed on the south (August–November 2002) and north (November 2002–June 2003) flanks of the Kaena Ridge, Hawaii, are used to document the flow variability associated with mixing within 200 m from the boundary, deep along the ridge, as part of the Hawaii Ocean Mixing Experiment (HOME). At both sites, strong temperature inversions are detected with vertical scales of ∼100 m. A Thorpe-scale analysis of the overturns yields a time-averaged dissipation near the bottom at the south site (1.2 × 10−8 W kg−1) that is 10 times higher than the north site (1.9 × 10−9 W kg−1), with both higher than the dissipation at similar depths 30 km from the ridge. On the south flank, observed horizontal currents and vertical displacements are dominated by the semidiurnal internal tide. On the north flank, the semidiurnal tide is less energetic than on the south, with a different vertical structure as tidal amplitudes decrease toward the boundary. These differences are attributed to greater separation from the bottom of downward-propagating internal tides at the north site compared to the south site, resulting in higher mixing at the south site. Near the boundary, near-inertial to diurnal oscillations are more energetic at the north than the south site. This asymmetry is attributed to near-inertial internal waves that are generated north of the ridge by winter storms; the ridge shadows the equatorward-propagating near-inertial internal waves leading to negligible amplitudes on the southern lee side. The near-inertial waves combine with internal tidal motions to create high strain conditions that lead to mixing at the north site.


Author(s):  
Callum J. Shakespeare ◽  
Brian K. Arbic ◽  
Andrew McC. Hogg

AbstractInternal waves generated at the seafloor propagate through the interior of the ocean, driving mixing where they break and dissipate. However, existing theories only describe these waves in two limiting cases. In one limit, the presence of an upper boundary permits bottom-generated waves to reflect from the ocean surface back to the seafloor, and all the energy flux is at discrete wavenumbers corresponding to resonant modes. In the other limit, waves are strongly dissipated such that they do not interact with the upper boundary and the energy flux is continuous over wavenumber. Here, a novel linear theory is developed for internal tides and lee waves that spans the parameter space in between these two limits. The linear theory is compared with a set of numerical simulations of internal tide and lee wave generation at realistic abyssal hill topography. The linear theory is able to replicate the spatially-averaged kinetic energy and dissipation of even highly non-linear wave fields in the numerical simulations via an appropriate choice of the linear dissipation operator, which represents turbulent wave breaking processes.


2019 ◽  
Vol 49 (10) ◽  
pp. 2523-2533 ◽  
Author(s):  
Tyler D. Hennon ◽  
Matthew H. Alford ◽  
Zhongxiang Zhao

AbstractThough unresolved by Argo floats, internal waves still impart an aliased signal onto their profile measurements. Recent studies have yielded nearly global characterization of several constituents of the stationary internal tides. Using this new information in conjunction with thousands of floats, we quantify the influence of the stationary, mode-1 M2 and S2 internal tides on Argo-observed temperature. We calculate the in situ temperature anomaly observed by Argo floats (usually on the order of 0.1°C) and compare it to the anomaly expected from the stationary internal tides derived from altimetry. Globally, there is a small, positive correlation between the expected and in situ signals. There is a stronger relationship in regions with more intense internal waves, as well as at depths near the nominal mode-1 maximum. However, we are unable to use this relationship to remove significant variance from the in situ observations. This is somewhat surprising, given that the magnitude of the altimetry-derived signal is often on a similar scale to the in situ signal, and points toward a greater importance of the nonstationary internal tides than previously assumed.


2019 ◽  
Vol 49 (8) ◽  
pp. 2133-2145 ◽  
Author(s):  
Jianjun Liang ◽  
Xiao-Ming Li ◽  
Jin Sha ◽  
Tong Jia ◽  
Yongzheng Ren

AbstractThe life cycle of nonlinear internal waves (NIWs) to the southeast of Hainan Island in the northwestern South China Sea is investigated using synergistic satellite observations, in situ measurements, and numerical simulations. A three-dimensional, fully nonlinear and nonhydrostatic model with ultrafine resolution shows that a diurnal internal tide emanates from a sill in the Xisha Islands at approximately 215 km away from the local shelf break. The internal tide transits the deep basin toward the shelf break and reflects at the sea bottom and seasonal thermocline in the form of a wave beam. Arriving at the shelf break, the internal tide undergoes nonlinear transformation and produces an undular bore. Analyses of in situ measurements reveal that the undular bore appears as sharp depressions of the strong near-surface seasonal thermocline. The undular bore gradually evolves into an internal solitary wave train on the midshelf, which was detected by the spaceborne synthetic aperture radar. This finding has great implications for investigating NIWs in other coastal oceans where waves are controlled by remotely generated internal tides.


2014 ◽  
Vol 44 (3) ◽  
pp. 834-849 ◽  
Author(s):  
Weifeng G. Zhang ◽  
Timothy F. Duda ◽  
Ilya A. Udovydchenkov

Abstract A hydrostatic numerical model with alongshore-uniform barotropic M2 tidal boundary forcing and idealized shelfbreak canyon bathymetries is used to study internal-tide generation and onshore propagation. A control simulation with Mid-Atlantic Bight representative bathymetry is supported by other simulations that serve to identify specific processes. The canyons and adjacent slopes are transcritical in steepness with respect to M2 internal wave characteristics. Although the various canyons are symmetrical in structure, barotropic-to-baroclinic energy conversion rates Cυ are typically asymmetrical within them. The resulting onshore-propagating internal waves are the strongest along beams in the horizontal plane, with the stronger beam in the control simulation lying on the side with higher Cυ. Analysis of the simulation results suggests that the cross-canyon asymmetrical Cυ distributions are caused by multiple-scattering effects on one canyon side slope, because the phase variation in the spatially distributed internal-tide sources, governed by variations in the orientation of the bathymetry gradient vector, allows resonant internal-tide generation. A less complex, semianalytical, modal internal wave propagation model with sources placed along the critical-slope locus (where the M2 internal wave characteristic is tangent to the seabed) and variable source phasing is used to diagnose the physics of the horizontal beams of onshore internal wave radiation. Model analysis explains how the cross-canyon phase and amplitude variations in the locally generated internal tides affect parameters of the internal-tide beams. Under the assumption that strong internal tides on continental shelves evolve to include nonlinear wave trains, the asymmetrical internal-tide generation and beam radiation effects may lead to nonlinear internal waves and enhanced mixing occurring preferentially on one side of shelfbreak canyons, in the absence of other influencing factors.


2016 ◽  
Vol 46 (12) ◽  
pp. 3661-3679 ◽  
Author(s):  
Samuel M. Kelly ◽  
Pierre F. J. Lermusiaux ◽  
Timothy F. Duda ◽  
Patrick J. Haley

AbstractA hydrostatic, coupled-mode, shallow-water model (CSW) is described and used to diagnose and simulate tidal dynamics in the greater Mid-Atlantic Bight region. The reduced-physics model incorporates realistic stratification and topography, internal tide forcing from a priori estimates of the surface tide, and advection terms that describe first-order interactions of internal tides with slowly varying mean flow and mean buoyancy fields and their respective shear. The model is validated via comparisons with semianalytic models and nonlinear primitive equation models in several idealized and realistic simulations that include internal tide interactions with topography and mean flows. Then, 24 simulations of internal tide generation and propagation in the greater Mid-Atlantic Bight region are used to diagnose significant internal tide interactions with the Gulf Stream. The simulations indicate that locally generated mode-one internal tides refract and/or reflect at the Gulf Stream. The redirected internal tides often reappear at the shelf break, where their onshore energy fluxes are intermittent (i.e., noncoherent with surface tide) because meanders in the Gulf Stream alter their precise location, phase, and amplitude. These results provide an explanation for anomalous onshore energy fluxes that were previously observed at the New Jersey shelf break and linked to the irregular generation of nonlinear internal waves.


2013 ◽  
Vol 43 (2) ◽  
pp. 248-258 ◽  
Author(s):  
Rob A. Hall ◽  
John M. Huthnance ◽  
Richard G. Williams

Abstract Reflection of internal waves from sloping topography is simple to predict for uniform stratification and linear slope gradients. However, depth-varying stratification presents the complication that regions of the slope may be subcritical and other regions supercritical. Here, a numerical model is used to simulate a mode-1, M2 internal tide approaching a shelf slope with both uniform and depth-varying stratifications. The fractions of incident internal wave energy reflected back offshore and transmitted onto the shelf are diagnosed by calculating the energy flux at the base of slope (with and without topography) and at the shelf break. For the stratifications/topographies considered in this study, the fraction of energy reflected for a given slope criticality is similar for both uniform and depth-varying stratifications. This suggests the fraction reflected is dependent only on maximum slope criticality and independent of the depth of the pycnocline. The majority of the reflected energy flux is in mode 1, with only minor contributions from higher modes due to topographic scattering. The fraction of energy transmitted is dependent on the depth-structure of the stratification and cannot be predicted from maximum slope criticality. If near-surface stratification is weak, transmitted internal waves may not reach the shelf break because of decreased horizontal wavelength and group velocity.


Sign in / Sign up

Export Citation Format

Share Document