Adsorption of novel insensitive munitions compounds at clay mineral and metal oxide surfaces

2015 ◽  
Vol 12 (1) ◽  
pp. 74 ◽  
Author(s):  
Billy R. Linker ◽  
Raju Khatiwada ◽  
Nico Perdrial ◽  
Leif Abrell ◽  
Reyes Sierra-Alvarez ◽  
...  

Environmental context Insensitive munitions compounds are increasingly used in the manufacture of military energetic materials because of their lower unintentional explosion risk during transport and handling. The current study was designed to better resolve the environmental chemistry of two of these insensitive munitions compounds. In particular, we investigated the solid–solution partitioning that occurs when aqueous solutions containing dissolved unexploded ordinances come into contact with soil mineral media. Abstract Insensitive munitions compounds (IMCs) are increasingly used for military energetic materials, yet their environmental fate is poorly understood. Prior work has shown that the nitroaromatic 2,4-dinitroanisole (DNAN) and the heterocyclic nitrogen compound 3-nitro-1,2,4-triazole-5-one (NTO), both newly introduced IMCs, can undergo microbially mediated reduction under anoxic conditions to form 2-methoxy-5-nitroaniline (MENA) and 3-amino-1,2,4,triazole-5-one (ATO) respectively. In the present work, DNAN, MENA, NTO and ATO were subjected to batch adsorption–desorption experiments with specimen soil mineral adsorbents that included montmorillonite, birnessite and goethite. DNAN and MENA exhibited high affinity, linear adsorption to montmorillonite, with enhanced surface excess at a given aqueous equilibrium concentration for K+-saturated relative to Na+-saturated forms, but negligible adsorption to the metal oxides. Powder X-ray diffraction data and surface occupancy calculations indicate interlayer intrusion by DNAN and MENA and adsorption at siloxane sites. Conversely, NTO and ATO exhibited low sorptive affinity and apparent anion exclusion upon reaction with the negatively charged layer silicate clays. However, both of the N-heterocycles showed positive adsorption affinities for goethite (Kd values of 11.1 and 3.1, and HI values of 1.8 and 0.50 respectively), consistent with anion adsorption to the positively charged goethite surface. Both ATO and MENA were subjected to apparent oxidative, abiotic chemical transformation during reaction with birnessite. The results indicate that the IMCs studied will exhibit adsorptive retardation – and their biodegradation products may undergo further abiotic transformation – upon reaction at soil mineral surfaces.

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Sabarish Radoor ◽  
Jasila Karayil ◽  
Aswathy Jayakumar ◽  
Jyotishkumar Parameswaranpillai ◽  
Suchart Siengchin

AbstractIn the present work, we have developed a mesoporous silicalite-1 using CMC as a template for the removal of MB from aqueous solution. The synthesized silicalite-1 were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Energy-dispersive X-ray spectroscopy (EDAX) and N2 adsorption–desorption isotherm (BET). XRD and FT-IR analysis confirmed the formation of crystallinity and development of MFI structure in the mesoporous silicalite-1. The adsorption of MB dye on mesoporous silicalite-1 was conducted by batch adsorption method. The effect of various parameters such as adsorbent dosage, initial dye concentration, contact time and temperature on the dye uptake ability of silicalite-1 was investigated. The operating parameters for the maximum adsorption are silicalite-1 dosage (0.1 wt%), contact time (240 min), initial dye concentration (10 ppm) and temperature (30 ℃). The MB dye removal onto mesoporous silicalite-1 followed pseudo-second-order kinetic and Freundlich isotherm. The silicalite-1 exhibits 86% removal efficiency even after six adsorption–desorption cycle. Therefore, the developed mesoporous silicalite-1 is an effective eco-friendly adsorbent for MB dye removal from aqueous environment.


Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2295
Author(s):  
Marwa El-Azazy ◽  
Ahmed S. El-Shafie ◽  
Hagar Morsy

Biochars (BC) of spent coffee grounds, both pristine (SCBC) and impregnated with titanium oxide (TiO2@SCBC) were exploited as environmentally friendly and economical sorbents for the fluroquinolone antibiotic balofloxacin (BALX). Surface morphology, functional moieties, and thermal stabilities of both adsorbents were scrutinized using SEM, EDS, TEM, BET, FTIR, Raman, and TG/dT analyses. BET analysis indicated that the impregnation with TiO2 has increased the surface area (50.54 m2/g) and decreased the pore size and volume. Batch adsorption experiments were completed in lights of the experimental set-up of Plackett-Burman design (PBD). Two responses were maximized; the % removal (%R) and the adsorption capacity (qe, mg/g) as a function of four variables: pH, adsorbent dosage (AD), BALX concentration ([BALX]), and contact time (CT). %R of 68.34% and 91.78% were accomplished using the pristine and TiO2@SCBC, respectively. Equilibrium isotherms indicated that Freundlich model was of a perfect fit for adsorption of BALX onto both adsorbents. Maximum adsorption capacity (qmax) of 142.55 mg/g for SCBC and 196.73 mg/g for the TiO2@SCBC. Kinetics of the adsorption process were best demonstrated using the pseudo-second order (PSO) model. The adsorption-desorption studies showed that both adsorbents could be restored with the adsorption efficiency being conserved up to 66.32% after the fifth cycles.


2015 ◽  
Vol 1130 ◽  
pp. 685-688
Author(s):  
Rui Yi Fan ◽  
Qing Ping Yi ◽  
Qing Lin Zhang ◽  
Zheng Rong Luo

A biosorbent was prepared by treating the persimmon (Diospyros kaki Thunb.) fallen leaves with sodium hydroxide (NaOH). The NaOH concentration and stirring period for the preparation of the biosorbent were adjusted to optimise the Cd(I) adsorption capacity of the biosorbents. Removal of highly toxic Cadmium metal ions from water system using the optimal biosorbent named ‘NPFL’ was investigated using a mimic industrial column. The result showed that NPFL could remove Cd(II) in large quantities from aqueous solution with coexisting metal ions. The raw material, NPFL and Cd(II) loaded NPFL were characterized by SEM-EDS. The reusability of NPFL was also studied by batch adsorption-desorption test.


2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Mulu Berhe Desta

Adsorption of heavy metals (Cr, Cd, Pb, Ni, and Cu) onto Activated Teff Straw (ATS) has been studied using batch-adsorption techniques. This study was carried out to examine the adsorption capacity of the low-cost adsorbent ATS for the removal of heavy metals from textile effluents. The influence of contact time, pH, Temperature, and adsorbent dose on the adsorption process was also studied. Results revealed that adsorption rate initially increased rapidly, and the optimal removal efficiency was reached within about 1 hour. Further increase in contact time did not show significant change in equilibrium concentration; that is, the adsorption phase reached equilibrium. The adsorption isotherms could be fitted well by the Langmuir model. The value in the present investigation was less than one, indicating that the adsorption of the metal ion onto ATS is favorable. After treatment with ATS the levels of heavy metals were observed to decrease by 88% (Ni), 82.9% (Cd), 81.5% (Cu), 74.5% (Cr), and 68.9% (Pb). Results indicate that the freely abundant, locally available, low-cost adsorbent, Teff straw can be treated as economically viable for the removal of metal ions from textile effluents.


Water ◽  
2018 ◽  
Vol 10 (7) ◽  
pp. 957 ◽  
Author(s):  
Muhammad Usman ◽  
Ioannis Katsoyiannis ◽  
Manassis Mitrakas ◽  
Anastasios Zouboulis ◽  
Mathias Ernst

The small sized powdered ferric oxy-hydroxide, termed Dust Ferric Hydroxide (DFH), was applied in batch adsorption experiments to remove arsenic species from water. The DFH was characterized in terms of zero point charge, zeta potential, surface charge density, particle size and moisture content. Batch adsorption isotherm experiments indicated that the Freundlich model described the isothermal adsorption behavior of arsenic species notably well. The results indicated that the adsorption capacity of DFH in deionized ultrapure water, applying a residual equilibrium concentration of 10 µg/L at the equilibrium pH value of 7.9 ± 0.1, with a contact time of 96 h (i.e., Q10), was 6.9 and 3.5 µg/mg for As(V) and As(III), respectively, whereas the measured adsorption capacity of the conventionally used Granular Ferric Hydroxide (GFH), under similar conditions, was found to be 2.1 and 1.4 µg/mg for As(V) and As(III), respectively. Furthermore, the adsorption of arsenic species onto DFH in a Hamburg tap water matrix, as well as in an NSF challenge water matrix, was found to be significantly lower. The lowest recorded adsorption capacity at the same equilibrium concentration was 3.2 µg As(V)/mg and 1.1 µg As(III)/mg for the NSF water. Batch adsorption kinetics experiments were also conducted to study the impact of a water matrix on the behavior of removal kinetics for As(V) and As(III) species by DFH, and the respective data were best fitted to the second order kinetic model. The outcomes of this study confirm that the small sized iron oxide-based material, being a by-product of the production process of GFH adsorbent, has significant potential to be used for the adsorptive removal of arsenic species from water, especially when this material can be combined with the subsequent application of low-pressure membrane filtration/separation in a hybrid water treatment process.


2021 ◽  
Vol 226 ◽  
pp. 112805
Author(s):  
Jiao Liu ◽  
Yun-shan Liang ◽  
Teng Hu ◽  
Hong Zeng ◽  
Rong Gao ◽  
...  

Soil Research ◽  
2009 ◽  
Vol 47 (3) ◽  
pp. 286 ◽  
Author(s):  
Yanyu Bao ◽  
Qixing Zhou ◽  
Yingying Wang

The adsorption characteristics of tetracycline by 2 soils including a clay-rich soil (cinnamon soil) and an iron oxide-rich soil (red soil) were investigated as a function of soil organic matter (SOM). SOM is the main adsorbent for tetracycline in the soil environment. The results indicated that the adsorption kinetics of tetracycline by the different soils with or without organic matter was described by the Elovich equation and the exponent equation. The adsorption of tetracycline on red soil was quite rapid and equilibrium could be reached after 5 h. In contrast, the concentration of tetracycline in cinnamon soil reached equilibrium after 11 h. The difference in equilibrium time in cinnamon soil and red soil was caused by their dominant components for adsorption, including clays, organic matter, and Al/Fe hydrous oxides. It took longer for the penetration of tetracycline into the interlayers between clays and organic matter in cinnamon soil, but tetracycline needed less time for adsorption through surface complexation on oxide surfaces of red soil. Removing SOM from soil markedly shortened the equilibrium time (7 h) of adsorption and reduced the equilibrium concentration (Cs) in cinnamon soil, but not in red soil, because of different dominant components for adsorption in the 2 natural soils. In natural and SOM-free soils, >98% of tetracycline in solution could be sorbed. The adsorption of tetracycline on natural and SOM-free soils was well described by Freundlich adsorption isotherms. Batch adsorption experiments showed that the adsorption of tetracycline on natural red soil was stronger than that on natural cinnamon soil. Adsorption capacity (KF) decreased with an increase in SOM removed from soil, which is attributed to the effect of tetracycline sorbed by SOM in different soils. However, SOM affected the adsorption intensity (n) of different soils diversely; there was a decrease for red soil and an increase for cinnamon soil. In particular, red soil with high Al/Fe hydrous oxides had higher adsorption affinities than cinnamon soil.


2021 ◽  
Vol 1162 ◽  
pp. 65-73
Author(s):  
Rakhmawati Farma ◽  
Ona Lestari ◽  
Erman Taer ◽  
Apriwandi ◽  
Minarni ◽  
...  

Heavy metal such as Cu, Fe, and Zn are the most serious contributers to environmental problems. The removal of heavy metal from the environment is the research interest nowdays. The adsorption of Cu, Fe and Zn from wastewater was investigated with various activated carbons as adsorbents. The activated carbons were produced from oil palm leaves by using multi-activation methods. The H3PO4, NaOH, ZnCl2 and KOH were chosen as chemical activating agents. Batch adsorption experiment was used to test the ability of activated carbon to remove Cu, Fe, and Zn from wastewater. The surface characteristics of activated carbon were evaluated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and nitrogen adsorption-desorption isotherms. The Activated carbons were able to purify wastewater with a maximum turbidity level of 2.83 NTU. The AC-H3PO4 activated carbon showed the highest absorbability of Cu metal as 91.540%, while the highest absorbabilities of Zn and Fe metals were indicated by AC-KOH activated carbon of 22.853% and 82.244% absorption respectively. Therefore, these results enable the oil palm leaves to become a high potential for activated carbon as removal the heavy metals.


Clay Minerals ◽  
2014 ◽  
Vol 49 (5) ◽  
pp. 747-763 ◽  
Author(s):  
A. Berez ◽  
F. Ayari ◽  
N. Abidi ◽  
G. Schäfer ◽  
M. Trabelsi-Ayadi

AbstractThe purpose of this study was to determine whether a bentonite from the Gafsa deposit (western Tunisia) could be used to remove the Foron Blue 291 (FB) azo dye from wastewater. Batch adsorption and desorption experiments were conducted using untreated and purified bentonite and the influence of contact time, pH, adsorbent mass and temperature of the dye solution on the adsorption of FB was evaluated. Kinetic and isotherm data were fitted using two non-linear kinetic and two non-linear isotherm equations. In addition, the fits were evaluated using the coefficient of determination (R2) and the RMSE. The percentage of dye removal increased with increasing amount of adsorbent until total discolouration was achieved. The adsorption isotherms followed the Langmuir model, with the purified bentonite having a higher adsorption capacity than the raw material due to its higher specific surface area. In addition, the FB molecules were removed from the liquid medium by physical adsorption. Batch desorption experiments were conducted to study the desorption kinetics and the characteristics of the desorption isotherms as well as to quantify the portion of the FB (by mass) that was irreversibly fixed on the solid. Overall, the desorption kinetics were similar to the adsorption kinetics, which indicated that the adsorption-desorption process of azo dye is non-singular; irreversibility occurred that was underlined by an observed thermodynamic index of irreversibility (TII) of 0.69–0.94. The desorption isotherms of the FB depended on the mass of the FB that was initially adsorbed on the bentonite sample, suggesting hysteresis. The amount of irreversibly retained FB was between 46 and 68% of the initial adsorbed mass.


2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Shaojun Huang ◽  
Chengzhang Ma ◽  
Yaozu Liao ◽  
Chungang Min ◽  
Ping Du ◽  
...  

Poly(1-amino-5-chloroanthraquinone) (PACA) nanofibrils were applied as novel nanoadsorbents for highly toxic mercury removal from aqueous solutions. A series of batch adsorption experiments were conducted to study the effect of adsorbent dose, pH, contact time, and metal concentration on Hg(II) uptake by PACA nanofibrils. Kinetic data indicated that the adsorption process of PACA nanofibrils for Hg(II) achieved equilibrium within 2 h following a pseudo-second-order rate equation. The adsorption mechanism of PACA nanofibrils for Hg(II) was investigated by Fourier transform-infrared (FT-IR) spectra and X-ray photoelectron spectroscopy (XPS) analyses. The adsorption isotherm of Hg(II) fitted well the Langmuir model, exhibiting superb adsorption capacity of 3.846 mmol of metal per gram of adsorbent. Lastly, we found out that the as-synthesized PACA nanofibrils are efficient in Hg(II) removal from real wastewater. Furthermore, five consecutive adsorption-desorption cycles demonstrated that the PACA nanofibrils were suitable for repeated use without considerable changes in the adsorption capacity.


Sign in / Sign up

Export Citation Format

Share Document